Feeds:
Posts
Comments

Posts Tagged ‘MojoMojo’

4.75 Tone Bones - Almost perfect but not quite

bohemian-guitars-21787167

Bohemian Guitars BOHO Series Motor Oil

Summary: Inexpensive but incredibly playable and most importantly, very nice sounding, the BOHO Motor Oil really took me by surprise. Yeah, it seems a bit gimmicky, but these guitars are inspired by the founder’s South African roots where people put instruments together from whatever they could find.

Pros: Super-easy and comfortable to play. Pickups are voiced such that there’s a clear distinction between the positions. Very response to volume knob variation.

Cons: These are nits at most: The tuners need to be tightened a bit, as the strings can go out of tune fairly easy. Tone knob almost acts like a volume knob, but it’s serviceable.

Price: $299.00 Direct

Features:

  • Model: Motor Oil!
  • Body: Recycled metal hollow body w/ removable back panel. Basswood frame for increased amplification and structural integrity
  • Neck Wood: Maple
  • Neck type: Bohemian Through-Body
  • Fretboard: Rosewood
  • Headstock: Red
  • Finish: Golden Glaze
  • Frets: 21
  • Nut Width: 1 3/4″
  • Width at 12th Fret: 2 1/8″
  • Width at 21st Fret: 2 3/8″
  • Neck Thickness: 7/8″
  • Scale Length: 25 1/2″
  • Hardware: Chrome
  • Tuners: 3R 3L screw in w/ removable keys
  • Bridge/Tailpiece: Tune-o-Matic
  • Pickups: Humbucker, Humbucker
  • Electronics: Volume, Tone
  • Switch: 3-way toggle
  • Self-standing: This model has a built in stand made from recycled rubber.
  • Inspired by South Africa. Designed in Atlanta. Produced in China.

Tone Bone Rating: 4.75 ~ The best word to describe this guitar is FUN. It plays as fun as it looks!

I’ll admit it right out of the gate: I really tried NOT to like this guitar. The moment I took it out of the box, my first reaction was literally, “Oh shit! HAHAHAHAHA!” and I chuckled about it for several minutes. In fact, I let the guitar stand in my living room for a few days before I even decided to play it because I didn’t think this was a very “serious” guitar. I imagined myself in a clown suit playing it. But since I asked for the review unit, my sense of obligation overcame my initial amused disdain for it. So I took it to my man-cave, plugged it into my amp, tuned up the guitar, then started to play. And play. And play.

A couple of hours passed by with me just tooling with the guitar, and I finally had to stop when my wife opened the kitchen door glaring at me because I hadn’t gotten to my honey-do projects for the day.

Did I really lose track of time? I asked myself, That ONLY happens when I’m getting lost in the sound and what I’m playing is pleasing to me. When something gets me in the “zone,” it’s special, and all my initial thoughts and bias about its appearance completely disappeared.

When I put the BOHO down, I resolved to do a sound test with it as soon as I could. I had a gig that night, so I couldn’t get to it until the next day, but I looked forward to playing that guitar throughout my gig.

Even still, this guitar reeks of “gimmick” when you look at it. But how it plays and sounds completely overshadows any gimmickry that its appearance may imply. It totally took me by surprise, and I have to say that hands-down I love it! And the fact that it’s made in China is actually a good thing. Chinese guitar construction has come a long, long way over the years, and labor is still cheap, which means these guitars are affordable, so you shouldn’t let price-bias get in your way.

Fit and Finish

I could see nothing wrong with the guitar’s appearance. Other people have reported dents in the past, but my review unit had none. Note that those reports were from earlier models, and I don’t think they had the bracing that the new models have that make them tougher. The only nit I really had was that bending the first string at around the 12th or 13th fret while really digging in would fret out the string. But I attributed that more to a setup problem, and it’s quite possible that the bridge settled a bit during shipping. Raising the bridge a millimeter or two would solve that issue. It certainly wasn’t a neck angle issue. Everything appeared to line up just fine.

As far as overall construction is concerned, amazingly enough, the guitar’s pretty solid-feeling. I was thinking that it might be a bit flimsy; after all, its body is a freakin’ gas can! But the internal bracing provides plenty of structural integrity, so fragility isn’t an issue at all.

But other than my little nit, the guitar actually looks pretty cool, and over time, as I played it, it grew on me. That had more to do with how it plays and sounds than its appearance.

Playability

Amazingly enough, moving around the neck is smooth as silk. I love that it has a rosewood fret board because it provides a tactile feel that makes it feel familiar (most of my many guitars have rosewood fret boards). I personally prefer fatter fret wire, but that’s just personal preference, and doesn’t take away from how well the guitar feels and plays. And surprisingly enough, even with my belly, the guitar’s very comfortable to play despite the obviously fatter body from the can.

How It Sounds

Okay, so this is where the rubber hits the road, and where, most importantly, the guitar impacted me the most. Once I got past the guitar’s appearance, it was its voice that really struck me. While the folks at Bohemian Guitars tout this as the “rock” model, and it certainly has a great voicing for rock, I actually loved its voicing clean or just slightly dirty. For comparison, the voicing has elements of a later model Les Paul with sort of deep voice, but also has the “woody” elements of a semi-hollow body like a 335. It’s a cool voice. I would’ve liked to have a better EQ response with the tone knob because changes in the tone knob affected volume, but I found a good spot that worked for all three pickups and kept it there.

The first three clips you’ll hear are the same phrase played through each of the pickup positions, starting with neck pickup and moving to the bridge. With the first two, I just made up stuff off the top of my head, but with the third clip, I used the main riff from Oasis’ Wonderwall. No matter what I’m playing, the one thing I always look for is note separation, especially when played dirty. I didn’t play any lead lines because frankly, 97% of the time I’m playing rhythm. So it’s important to get a sense of how well the guitar articulates. The amp I used for this was my trusty Aracom VRX18 with EL84’s, played in the drive channel. The amp was set to the very edge of breakup so I could get it to overdrive with volume knob changes and attack.

All clips were recorded raw with the exception of the last clip where I added some hall reverb.

Clean, all three pickups

Dirty, all three pickups

Edge of breakup, all three pickups

Jazzy Blues w/reverb, middle pickup

Admittedly, the clean and edgy tones were the ones that got me to lose myself for those couple of hours when I first played the guitar. And to be completely honest, I love the sound this guitar produces clean and at the edge of breakup best. This probably has to do with my Les Paul bias with respect to a “rock” sound. It’s not that I don’t like the overdriven sound of the guitar, it’s just that I have a preference for the sound I want to produce when playing with overdrive.

Overall Impression

Once I got over my initial doubts about the guitar, I discovered a very nice-playing and nice-sounding guitar under the covers. And at $299, this an incredibly approachable guitar that won’t break the bank in the process. Would I gig with it? To be honest, I’m not sure. But I have no doubts with its solid construction that it would be able to stand the rigors of gigs. But for its gorgeous clean tones, I’d certainly use it in the studio, especially for the new reggae-style tunes I’m working on.

And truth be told, its appearance has actually grown on me. I still don’t know if I’d gig with it regularly, but that has nothing to do with how it looks. With a gigging guitar, I typically look for versatility. I’d have to bring it to band rehearsal to see how it would perform. But other than that, I love this guitar. For what it is, it’s the ultimate in “cool.”

Read Full Post »

5 Tone Bones - Gear has stellar performance, value, and quality. This is definitely top of the class, best of breed, and it's a no-brainer to add this to your gear lineup!

Hughes & Kettner TubeMeister 18 Head

Summary: This amp is truly a tone chameleon, capable of delivering vintage to modern tones in one 18 Watt package. I daresay that it is pretty much the most versatile amp I’ve ever owned; not only from a tone standpoint, but also from a power standpoint. 18 Watts too loud in your space? Bring it down to 5W or 1W or even 0W! The on-board RedBox DI is absolutely killer, and provides for truly silent recording, which is a huge for late-night recording when the kids are asleep (or roommates, etc.).  Super-responsive EQ makes for tons of tone shaping possibilities.

Pros:Where do I begin? This amp has it all for me; especially in the recording department.

Cons: This is a very minor nit, but even with a Strat, the lead channel can really compress at high gain settings.

Price: $599 Street ($50 for the optional footswitch)

Features:

  • Channels: Clean, Lead + Lead Boost
  • Power Soak: 5W, 1W, Silent
  • Preamp: 2 X 12AX7
  • Power Amp: 2 X EL84
  • Effects Loop (Serial)
  • Speaker Output: 8 & 16 Ohm (will automatically detect – no switch)
  • Tube Safety Control (TSC) – keeps power tubes biased properly for optimal performance.
  • Padded, protective cover included
  • Optional channel switching footswitch.

Tone Bone Rating: 5.00 ~ I have to admit, I really lucked out with this amp. I bought it used from a good buddy who had only gigged with it once, and to be honest, didn’t know too much about it. But after I researched it, what originally attracted me to the amp was the on-board RedBox DI. But after playing with it for several hours since I picked it up, I simply love all the tones I can get from this amp – and I’ve only played one guitar through it! It’s a winner!

I’m such a gear slut. When I got this amp, my buddy, who’s also a fellow gear slut chuckled and said, “As if you need another amp…” I also laughed, and almost got buyer’s remorse. BUT what I didn’t have was an amp that had an on-board DI. But the RedBox is a special DI in that it has speaker simulation, which means you’re going to get the reactance of an amp connected to a speaker. It’s one thing to DI into a DAW, but it sounds like an amp plugged directly into a speaker. Add speaker simulation and there’s something special that happens when you add reactance into the mix. You get the dynamics you expect when plugged into a cabinet.

Fit and Finish

This amp is built like a tank. I’m sure H&K had the gigging musician in mind when they built the amp because it’s very solid. The only nit I’d have with respect to it’s physical appearance is that the level dots on the knobs can be a bit difficult to see from certain angles because of the chrome finish. It’s a small nit, and when I gig with the amp, I’ll probably either paint dark lines or stick some thin pieces of colored tape to the top of the knobs so I know where I’m setting things.

Also, when switched on, that blue LED glow is pretty cool. To be honest, I don’t really care about how the thing looks and focus much more on the sounds it can produce. But hey! If it sounds good and looks great in the process, I’m not going to complain.

How It Sounds

To start off, whether plugged into a cab or outputting directly from the DI into an audio interface, this amp is dead quiet when idle, except at high gain settings where the power amp will hum just a tiny bit. But that humming also has a lot to do with my Strat’s single coils. Haven’t tried it with any of my Les Pauls just yet, and I’m anticipating that they’d be quieter. But any amp fully cranked is going to make some noise.

Now to be completely honest, none of the clips I’m supplying here are with the amp hooked up to a cabinet and me miking the cab. My focus was on using the DI to capture my guitar sounds to see if I could get a usable recording that I could then tweak in production. Circling back a little with the DI, one thing that having a speaker simulation is that you get the subtle overtones and dynamics in the signal that you wouldn’t get with a direct signal. It’s typically a little dead when using a regular DI with no speaker simulation, thus no reactance. Truth be told, it’s not perfect, and it doesn’t sound nearly as good as the amp plugged into a cabinet. But it’s close. Real close, and though it doesn’t sound as good as a speaker moving air, it doesn’t suck tone. Dynamics are all retained. My thought behind getting this amp was to get a usable signal that I could then process in Logic and add the texturing there. So without further ado, let’s take a look (BTW, for these clips, I used my Strat plugged directly into the amp, with an XLR going direct to my MBox 2):

Raw signal, clean

My first test was to record a simple clean clip raw to see how it sounded. This clip has absolutely no plug-ins employed in neither the guitar tracks nor the output track.

When I finished the “rhythm” track for this, I immediately smiled. Not only did I have a usable signal, it sounded like my amp was plugged into a cabinet because the dynamics that I was expecting were all there, but with the added plus of no ambient room noise.

Clean, slightly processed

Since I had a usable signal, I wanted to fatten it up a bit and add some reverb to give the sound more space. Here’s the same clip as above, but slight processed (Note: I didn’t do any EQ on the either track).

After doing just those simple tweaks, I knew I had a winner with respect to a recording amp.

Dirty

I wasn’t going to originally include this clip because if there’s one nit I had with the amp while recording this last night, was that at real cranked up settings, the signal compresses – a lot. I guess I’m used to using vintage-style amps that never get that far. But with this amp, I have to be careful about cranking the amp too high. It’s a little hard to hear in the clip itself, but while playing, I noticed a reduction in note separation. But granted, I had the Master wide open, and the gain knob at 3pm. I’ve learned to set the Gain to around 10am, and I still get plenty of sustain, but much less compression.

Sustain test

Finally, I wanted to experience that noted H & K tube sag, and see how well the amp would sustain my guitar signal. In a nutshell, it sustains incredibly well.

The most impressive thing about this clip was at the end where the amp is picking up the overtones of the guitar. OMG! I couldn’t believe that when I was playing last night!

Final Impression

I don’t know what it is, but I’m running across a lot of game-changers for me. While I love my vintage-style amps, and will continue to gig with them, I have a feeling that I’ll be getting a of mileage from the TubeMeister 18. As a bonus, check out this video review from Guitar World. Paul’s a killer player, and he really brings out the gorgeous tones the TubeMeister 18 can produce. There are actually two videos, and the second video where he starts playing the lead channel, had me swooning over the gorgeous overdrive this amp can produce.

 

Read Full Post »

4.75 Tone Bones - Almost perfect but not quite

play_electric

TC-Helicon Play Electric

Summary: Sporting the fantastic TC Helicon vocal engine and upgraded guitar pedal effects, including several TonePrint patches – Corona Chorus, Hall of Fame Reverb, Flashback Delay – plus a very nice compressor. Play Electric adds amp emulation from its big brother, the Voicelive 3, and with the right tweaks, it’s entirely possible to plug this right into a PA and leave the amp at home.

Cons: The only little nit that I have is that the loop length is extremely short – around 15 seconds. That’s enough to capture a few bars to solo over, but there are times when you want to loop an entire verse or chorus. For that, you’ll have to use another looper. A bit of a bummer, but not enough to dismiss the power behind this unit.

Price: $349.00 Street

Features (from web site):

  • Professional Vocal Effects and Tone with natural sounding Vocal Harmonies guided by your guitar  and/or Room Sense which captures the ambient sound and can be used with piano.
  • Guitar FX styles from TC Electronic’s award-winning range of TonePrint pedals
  • Powerful amp emulations from VoiceLive 3 with a dedicated guitar output
  • User-friendly design with per-preset Vocal and Guitar FX combinations for easy performance control

Tone Bone Rating: 4.75 ~ If it weren’t for the short loop length, I’d be giving this unit a 5. I got a Switch-3 switch box to control the looping, and if you’re going to use the looper, this is a must-have.

I’ve had this unit a few months, but actually didn’t start using it until a couple of weeks ago when I had holiday gigs at various venues where space was at a premium, and lugging my pedal board along with my PA was impractical. I wish I had started using it sooner… the on-board modulation effects combined with amp simulation provide a super-rich tone; equivalent to the quality of tone that I’ve come to expect. But I’m getting a little ahead of myself.

The first holiday gig I had was for the staff party at an assisted living facility. To get to the place I was to play, I’d have to park my car in a loading zone then carry my stuff through a couple of halls. Now normally, my load out would take two trips, but this wasn’t really an option. Conceivably, I could take my entire rig (pedalboard, gig bag, cord bag, and SoloAmp PA) in one trip, but the stuff is a bit unwieldy, and I’ve dropped my pedal board, actually ruining a couple of pedals once. So a single trip was in order.

While I was trying to figure out how to configure my rig, I remembered that I had the Play Electric unit that had everything that I needed on board. So the morning of the gig, I did a quick tweak of the guitar settings (setting them to global so they’d be the same for every vocal patch, which is a godsend of a feature, by the way), packed up my cord bag with the cords I needed plus the Play Electric, and set off to my gig.

I didn’t use the looping feature at that gig because after seeing another dude play with a VoiceLive 2 and the Switch-3 switching unit, I knew that was the way to go, and besides, I didn’t have the Switch-3 yet. But that was okay. It was only a two-hour gig, and I could do all my songs – even the ones where I normally loop – without a looper.

Setup was an absolutely breeze. I had the VoiceLive 2, so setting up wasn’t anything new. Once I was all set up, I remembered the RoomSense feature, which is an on-board mic that picks up the ambient sound in a room, and can be used to harmonize for instruments that don’t plug in; like a piano for instance…. The facility where I played had a beautiful Kawai baby grand, so I upped the sensitivity of the RoomSense mic, and tested it out. OMG!!!!! I wish I had used that with my VoiceLive 2 when I had it. I could’ve been doing harmony while playing piano all this time! Oh well… lesson learned, and where there was a piano at my holiday gigs, which was everywhere except for two places, I used the RoomSense to harmonize while playing piano.

Note that since the unit uses the same vocal processing algorithms found in all the high-end TC Helicon vocal processors, I won’t be covering harmony here, just the guitar stuff.

Packed with Features

I thought the VoiceLive 2 had tons of stuff packed into it, but the Play Electric has so much more. Here are the amp models that are offered in the unit:

Clean Brit, Cali Clean, UK Clean, Deep Clean, Bright Switch, Warm, Little Thing, Chicken Picker, Brit OD, AC Crunch, Chunky Brit, Lil Champion, Chime Drive, 2×12 Combo, 4×12 Crunch, Swamptone, Nasaltone, Brown, Scooped, Metallic, TC Electronic Dark Matter Pedal, OD Pedal, Dark OD Pedal, Distortion Pedal, Acoustic (Flat), Acoustic (Shaped/BodyRez)

On top of that, you have full EQ control in the unit to adjust the EQ settings for what every guitar you’re playing. One nice feature of the EQ is that you can “move” the midpoint frequency of the mids. This is something that you typically find on good PA boards, but I can see the sense in including a feature like that with the Play Electric. You could move it higher for a naturally warm-sounding guitar, or lower to take the edge off a bright guitar, then adjust the high, mid and low around the midpoint. Very cool feature.

On top of that, the same algorithms that power the TonePrint pedals are also in the unit. I use two of the pedals on my electric board: the Corona Chorus and Hall of Fame reverb. These are mainstays on my pedal board, and to have those pedals in the Play Electric is awesome. The delay and compression models are also quite nice. I totally dig the compressor, and even though it’s fairly simplistic, it’s adjustable enough to achieve a very rich tone.

How It Sounds

Sorry, I don’t have any sound clips to share at this time, but after using it several times, I can confidently say that both the vocal and guitar tones are awesome. But as with anything, it takes spending a bit of time dialing in the settings. Luckily this is not at all difficult with the Play Electric. The brightly lit LCD screen is super-easy to read, and frankly, you can adjust practically everything without having to refer to the manual (though admittedly, I had to refer to the manual to adjust amp EQ settings).

As far as guitar tone is concerned, though I probably should’ve tested this with an electric guitar, the plain fact of the matter is that I would use this almost exclusively in my acoustic gigs (I’m actually in between bands right now). And for that, this unit produces incredible sound; so incredible, in fact, that I will be leaving my pedal board at home going forward. Here’s a little more discussion on the pedal models:

Though the unit includes TonePrint models, it’s not exclusively limited to those. Each model includes several other non-TonePrint models that you can use (I believe these are the same found on the VoiceLive 2), which have been traditionally pretty high-quality. Personally, I didn’t use them when I had the VoiceLive 2 because I had dedicated pedals that were much better than the on-board models. But with the TonePrint models, as these are my pedals of choice for modulation effects (specifically, chorus and reverb), using them is another no-brainer.

Corona Chorus

This is not nearly as adjustable as the standalone pedal; actually none of the models are, but it’s very easy to dial in the right level and speed to get a subtle (which I prefer) to a super-wet, drippy chorus tone.

Hall of Fame Reverb

When I got this pedal a couple of years back, it soon became my go-to reverb. The spring reverb is magnificent, but it’s the plate and hall reverbs where this pedal shines. I use the hall reverb to add a subtle expanse to my guitar tone without it sounding like I’m in a simulated all. It’s just a touch to “grease” as Doug Doppler says.

Delay

I don’t know if the Flashback model is used here, but the delay is quite nice on this unit. Again, I use it very subtly to provide just a touch of slapback, with a low mix level.

Compressor

This is actually my favorite “pedal” in the unit. There are five presets available that provide either more attack, sustain, pop or pump, and you can adjust the amount and makeup gain as necessary. I use the Subtle Sustain setting, and it works great with my acoustic.

Looping

As I mentioned, my only nit about the Play Electric is the short loop length, but after playing through several of the songs I play with looping, I found that for the most part, I can live with the short loop length because the sound that the Play Electric produces completely meets my needs; moreover, the prospect of carrying one less bag makes using this an absolute no-brainer.

Wrapping It Up

Getting to the point, I dig Play Electric. I wish it had longer looping, but to get that, plus a finer control over the guitar and vocal settings, I’d have to go to the VoiceLive 3 which is more than twice the price of this unit. Could it be worth it? Possibly… probably… but it’s not expense that I can make right now (especially since I’m saving up for a Gretsch Brian Setzer) 🙂 But for what the Play Electric provides besides looping, it’s a unit that will serve me well for a long time.

Read Full Post »

5 Tone Bones - Gear has stellar performance, value, and quality. This is definitely top of the class, best of breed, and it's a no-brainer to add this to your gear lineup!

 deacci_greenfaze

deacci_greenfaze_logo

Deacci Pure Legend “Green Faze” Humbuckers

Summary: This is a set of PAF-style ‘buckers with a reverse-wound neck pickup that captures that Peter Green out-of-phase sound. Whether or not they’re true to the original, these are game changers for me! They’re so clear and articulate – even with that “woman” tone in the neck position, I’m like… “Hey baby! Where ya been all my life?”

Pros: Absolutely articulate in any pickup position. Neck pickup is warm and deep-textured without losing that top-end bite. Bridge is bright and expressive, and that middle position… OMG! It’s going to give me countless tone-shaping possibilities!

Cons: None.

Price: $275.00 – $300.00 direct

Features:

  • Reverse-wound neck pickup to get that out-of-phase tone in the middle position.
  • Super responsive with an aggressive attack
  • Un-waxed potting
  • Available with nickel, chrome or gold plated covers – or unplated (all black, all creme, zebra-striped).

Tone Bone Rating: 5.0 ~ As I said, this is a game-changer for me. With my Les Pauls, I use either the Treble or the Rhythm pickup; rarely do I use the middle pickup. But the tonal possibilities this particular set of ‘pups offers in the middle position will ensure I’ll be using that position – A LOT. Rex Kroff, the luthier I had install the pickups and do my yearly setup, said the pickups made “Amber” suddenly wake up. To him – and me – the difference in tone between the Burst Buckers and these pickups was like night and day. Where the Burst Buckers sounded a little subdued and “wooly,” the Green Faze pickups made my guitar come to life!

At the end of May, I got contacted out of the blue by Declan Larkin, founder and builder of Deacci pickups. He asked me if I’d fancy a set of “the best humbuckers ever made.” He’d send me a set to review, and I could do with them as I pleased. I’m used to reviewing gear then eventually returning it after I’m done. As I’ve mentioned in my about page, I don’t like to be beholden to any manufacturer or appear that I’m doing a review because someone comped me some gear. So admittedly, I was a bit wary of this seemingly blind giveaway.

So I started doing a little research on Deacci. I found some forum posts in a couple of UK forums (Deacci is based in Norther Ireland) discussing the pickups, and I found some sound samples. The sound samples turned me on my ear! They sounded absolutely marvelous! Needless to say, I was intrigued. Plus, as an amusing aside, I found that the pickups are in a “Patent Applied For” state, and that Deacci pickups are PAF-style pickups, so PAF-PAF’s. 🙂

But seriously though, Declan also caught me at a good time, as I was considering swapping out the stock pickups in “Amber,” my ’58 Historic Les Paul. I was only using the bridge pickup on her because the neck pickup to me was just not clear enough. Even the neck didn’t have the “bite” that I was wanting. She had a gorgeous clean tone in the neck, but driven, the neck pickup was practically unusable; just way too muffled for my tastes. And having moved from a bluesy to a more straight-up rock sound, I needed brighter pickups.

So I looked at the various models that Declan builds and found that the Green Faze pickups had the slightly lower impedance ratings that I felt would brighten up Amber just right. And it must’ve been kismet because as I was doing my research on Deacci, I was listening to “Oh well, ” so perhaps there was some subliminal stuff going on because I just love that song! In any case, I contacted Declan and asked if it would be okay to evaluate the Green Faze set, as I was sensitive to the fact that his was a brand-new company, and I didn’t want to take advantage. But he said it was all good, and he’d send them over once he’d wind up a new set. Frankly, I was blown away by this, and absolutely humbled. All Declan asked for was a honest review, and if I didn’t like them, I could return them.

Well they’re not going back. They’re staying in my guitar – forever! I’m not saying this because of the freebie, I’m saying this from the root of my heart. The sound my guitar now makes with the Green Faze pickups installed in it moves me practically beyond words.

What’s so special about them? I think a lot of that has to do with how they constructed and especially, how they’re wound. Declan uses a Fibonacci number to determine the number of winds of wire to apply to the pickups. He has also established what he says is a much more efficient and consistent way to hand wind the pickups as well. As far as the Fibonacci stuff is concerned, that could all be just techno-voodoo. But Fibonacci numbers are extremely important because they exist in nature. So applying them to a man-made artifact – at least to me – makes sense as the Fibonacci numbers represent balance.

How They Sound

I’m not going to spend much time singing the pickups’ praises. Suffice it to say that to me, these pickups sound so good, they leave me short of words to describe them. In lieu of that, I recorded several clips. All clips were recorded with my Aracom VRX22 into a custom Aracom 1 X 12 with a Jensen Jet Falcon speaker in it. I also recorded the clips at bedroom level by running my amp into the wonderful Aracom DRX attenuator. Note also that absolutely no EQ was added in production, and I turned off all compression. So what you’ll be hearing, save for the lead break for “The Hit” is the guitar’s natural tone as picked up by my microphone.

Bloom

I played my guitar clean in the shop and was taken by the gorgeous overtones the pickups were producing, so I couldn’t wait to get home to see if I could get that classic Les Paul bloom. For this clip, I played the neck pickup, with the tone control turned all the way down to get that “woman” tone. I’m just picking single notes in an Am pentatonic.

Slow Blues – Fingerpicked – Neck Pickup

Putting the Bloom to Work

The next clip uses the fingerpicked clip above with a simple lead using the woman tone. Oh my…

After recording that, I wanted to see what the guitar would sound like on one of my more engineered songs. This is the lead break from my song “The Hit.” The first half features the “woman” tone, then I switch over to the bridge pickup to finish the solo.

Crunchy Tones

Here I’m playing the same riff for all three positions. The volume knobs are dimed, and my amp is set at the edge of breakup. These pickups through a lot of signal at the front-end of the amp forcing my pre-amp tubes to compress. It’s most evident with the Neck pickup.

Neck

Middle

Bridge

Clean Funk

I just love the fast attack of these pickups. The clean tones are right in your face, but not off-putting at all.

Neck

Middle

Bridge

Clean – Fingerpicked

The overtones that the pickups produce combined with the natural sustain of a solid body Les Paul, make for a rich, complex tone that makes me want squeeze every bit of tonal goodness out of what I’m playing.

Neck

Middle

Bridge

Oh Well…

Of course, I couldn’t do a review of Peter Green-style pickups without doing at least one Peter Green riff. Here’s “Oh well” (at least as close to what my ham-handedness could produce):

Overall Impression

Need I say more? I love these pickups. It’s past midnight and I’ve been writing this review since 8pm. It has been a stop and go affair as I’ve taken breaks to play my guitar. 🙂 I don’t give 5 Tone Bones often. What I do give 5 Tone Bones are game-changers. The Deacci Green Faze pickups are game-changers for me without a doubt!

For more information on Deacci pickups, go to the Deacci site!

Read Full Post »

5 Tone Bones - Gear has stellar performance, value, and quality. This is definitely top of the class, best of breed, and it's a no-brainer to add this to your gear lineup!

voicetone

TC-Helicon VoiceTone harmony-G XT
Summary: This could be considered the little brother of the VoiceLive Play GTX, as they both use the same harmony algorithm. Great, automatic vocal tone-shaping, with five different settings (I just used the default which has presence bump and bit of compression). The doubling on this unit is VERY nice; very human-like.Pros: Simple and straight-forward setup, and super-easy to use. Great audio quality. Very human-like harmony voices. Internal vocal tone-shaping is fantastic.

Cons: Reverbs are good, but a little on the subtle side. This could be due to my inexperience with the pedal. But this doesn’t in any way reduce its usability or quaity.

Price: $224.00 – $275.00 Street

Features:

  • Listens to guitar and voice to create correct harmony parts automatically
  • Tone switch smooths vocals with adaptive Live Engineer Effects
  • 18 combinations of reverb, delay and µmod shared by vocal and guitar input
  • 10 presets available, each with A/B options
  • Harmony interval selection includes 3rds and 5ths above and below, octave up and down, and the unique Bass interval
  • Stereo or mono configurable output
  • Clean, studio quality mic preamp with phantom power and XLR input
  • Guitar signal can be mixed in and share reverb or passed through to separate amplifier
  • Fast, accurate guitar tuner

Tone Bone Rating: 5.00 ~ After my VoiceLive Play GTX went kaput, I wanted to find a suitable replacement without all the GTX’s bells and whistles. After just a single gig with this pedal, the harmony-G XT more than fits the bill!

I’ve had a harmonizer/vocal processor in my acoustic chain for over ten years. The difference that it has made in my solo performances has been immense; adding a dimension to my performances that make a pure solo performance seem bland in comparison. I originally started with the DigiTech Vocalist Live 4, but when that went south, I got the TC-Helicon VoiceLive Play GTX. Now THAT was a game-changer. The harmony algorithm made the voices so much more human-like than the Vocalist Live.

But alas, nothing works forever, and after around 500 or so gigs, my VoiceLive Play GTX finally went kaput a few weeks back. Due to finances, I couldn’t just go out and get a replacement. But that turned out to be a blessing in disguise because it gave me some time to check out other harmony/vocal processor solutions, but more importantly, to re-evaluate what my needs actually were.

With the VocalistLive and VoiceLive units, I enjoyed a lot of fine-tuned control over vocal processing and harmony parameters. But to tell you the truth, I rarely set the parameters much different from their defaults. And there were definitely times where I just wanted something much more simple. So I took a good look at both the DigiTech Vocalist Live 3 and the harmony-G XT. Both units had simple, straight-forward setups. Both were absolutely easy to use. But knowing how great the audio quality was with the TC-Helicon stuff, it was a pretty easy decision to go with the harmony-G.

So I purchased it yesterday a couple of hours before I had to leave for my gig. When I got home, I opened up the box, hooked up the unit, then went through the quick start procedure in the manual (yes, I read the manuals). What amazed me was just how easy it was to dial in the settings I needed. Granted, the first preset was voiced just how I wanted it with respect to the harmony voicings, so all I had to do was get the level right. I played around with it for about 10-15 minutes, then packed everything up for my gig, where the real test would take place.

How did it perform? Well, it was like I had my VoiceLive Play back in my chain. The harmonies were excellent. But more importantly, the compression and presence really made my voice jump out. Having been without vocal processing for the past few weeks, I can tell you that just a little compression can make all the difference in the world. And amazingly enough, even though I don’t have fine control over the amount of compression, I’m actually not missing being able to set it. The harmony-G seems to be set at the sweet spot. EQ-wise with respect to vocals, I just set the EQ on my PA to flat, and let the harmony-G drive my EQ. My vocals last night were clear and present without being mid-rangy.

With a simpler solution, there are trade-offs. For instance, I don’t have the kinds of effects like chorus that I could apply to the vocals, and mid-song switching between the A and B settings of a preset has a bit of delay. But that’s just going to take some practice to overcome. But considering my basic needs, I’ve basically everything I need to take me through a solo gig. I couldn’t be happier!

Read Full Post »

5 Tone Bones - Gear has stellar performance, value, and quality. This is definitely top of the class, best of breed, and it's a no-brainer to add this to your gear lineup!

ElectroHarmonix Soul Food Overdrive

Summary: Billed as a clone of a Klon Centaur (or “klone” as some put it), this overdrive purports to offer the same tone capabilities as that pedal but at five times less the original cost, and twenty times less than what they’re going for on eBay.

Pros: The Soul Food falls into my “ideal” category of overdrives: Pushing my front-end, but enhancing my tone. Super-usable Treble Boost; very touch-sensitive and expressive. Lots of boost on tap.

Cons: None.

Price: ~$62.00 – $65.00 Street

Features (from EHX site):

  • Transparent overdrive
  • Boosted power rails for extended headroom and definition
  • Super responsive
  • Compact, rugged design
  • Selectable true bypass or buffered bypass modes
  • 9.6DC-200 power supply included. Also runs on 9 Volt battery

Tone Bone Rating: 5.0 ~ Some people have billed this as a one-trick-pony in that it is best used to boost the front end of an amp at the edge of breakup, then add just a bit of grind. To be honest, that really is the pedal’s sweet spot. But what it does to my tone with just that makes it highly expansive with respect to sustain, overtones, and harmonics, giving me an enhanced palate of drive and nuance. That’s no one-trick-pony to me.

I’m going to just get this out of the way right now: The Soul Food is NOT a transparent overdrive, no matter how it’s touted. As an aside, I think this whole transparency thing in the gear world is a little overblown. Yeah, I know, I’ve been on the transparency wagon for a long time, but I’ve started reconsidering my whole notion of transparency. I’ve been working on an article that discusses this that I’ll release some time. But everything you add to your signal chain is going to alter your tone in some way. Granted, if you ONLY use the pedal as a boost, with neutral EQ, and zero gain, then I suppose you could call it transparent. But let’s be realistic; I don’t know of any overdrive pedal that I’d use where I didn’t adjust the EQ to fit the gear I’m playing and also add varying levels of grit. With respect to the Soul Food, it may not be transparent, but WHO CARES? 🙂

I’ll also say this: This pedal is the shit! I’ve never played a Klon, but if this pedal does anything near what the Klon does, then I’m not surprised why people are paying upwards of $1000 to $1500 for that pedal, but I’ll pay $62 all day! But that said, don’t mistake my enthusiasm for getting great tone for so cheap. I’m excited about the tone, period! If this pedal cost $200, I’d buy it for its wonderful sound.

I realize there are folks who say this sounds nothing like a Klon. I’ve viewed and listened to several demos head-to-head demos, and yes, there are differences; though I have to admit that the differences I observed were fairly subtle, at least recorded. But to me, based upon playing it for several hours over the last couple of days, I couldn’t care less how close or far away it is from a Klon. This pedal stands on its own as a great overdrive pedal.

EHX Is Classy

I mentioned this in my first impressions article, but EHX definitely went the extra mile with the Soul Food. Not only do you get the pedal, they include a 9V power supply as well! You might say ho-hum but to me it says a lot that a company would be willing to throw in some extra stuff for such an inexpensive pedal.

How It Sounds

In a word, awesome! I’m not excited about this pedal just because it cost me less than $70. That’s certainly something to be excited about. But to get the tone and performance that the Soul Food delivers at this price-point just blows me away. EHX has totally hit the ball out of the park with this pedal irrespective of it being a “klone.” Plain and simple, this is just a great overdrive pedal! Ancestry aside, the Soul Food stands on its own.

I’ve created some clips, but as opposed to saving the discussion till after, I’ll discuss it now. When I first hooked up the pedal, I did the usual thing I do with overdrives and set the volume to unity gain (about 10am), zeroed out the drive, and placed the treble boost at neutral (noon) – all through a totally clean amp. The first thing I noticed when I switched it on was how the Soul Food brought out subtle harmonics and overtones. My tone was also a little fatter, but with the high-frequency artifacts, also had a little more top-end sparkle. That alone was simply yummy to me and it got even sweeter when I upped the gain on my amp to the edge of breakup, then added a bit of treble boost and drive to the pedal.

When I found the sweet spot of the Soul Food, the skies parted and a chorus of angelic host sang out in joy. Not really. But lots of great things happened. What you get is more sustain, great touch-sensitivity, incredible response to both attack and volume knob changes, wonderful grind, all while maintaining note separation. One would think that with the extra sustain the tone would be muddy and feel squished, but not so with the Soul Food. Again, if this comes close to a Klon, I can see why that pedal is so highly coveted. There’s definitely some tonal magic that’s happening with the Soul Food.

When I first get overdrive pedals, I try to be as skeptical as possible about them. They have to prove to me that they’re worth the money I’ve spent or if they live up to the hype. Within the first few minutes of getting the pedal, the Soul Food proved definitely its worth, and then some. The cool thing though was that it wasn’t EHX that was creating the hype. It was bloggers such as myself who were testing it out and writing positive reviews of the pedal. It just simply kicks ass!

I realize that there are those who pooh-pooh the Soul Food as a cheap imitation. But as I said above, this pedal can stand on its own, regardless of its supposed ancestry. For me, I’ve never had the opportunity to play a Klon, so I really don’t know for certain what it can do. If it does what the Soul Food does, but just better. That’s awesome. But I’m absolutely digging what the Soul Food is doing for my tone right now!

Okay… Time for clips!

This first clip is very short and demonstrates the sustain you get when the pedal is switch on. I’m playing my 59 Les Paul replica with the “woman tone” (volume cranked, tone to zero).

This next two clips demonstrate the clarity and definition that the Soul Food provides when switched on, making your sound just come alive. I suppose you could say that this is a demo of what the Treble Boost can do. Here I’ve got it set at 2pm. My replica is in the middle pickup position, with both volumes at about 6, and tones all the way up.

Did I mention that the Soul Food is incredibly responsive? In this clip, I’m just noodling. I start out with little blues riff in E major with the pedal off, then I switch it on and go from a light touch to greater attack. The pedal responds beautifully!

Finally, here clips from First Impressions article (I’ve just taken the whole excerpt so I don’t have to re-explain everything). All clips below were played on R8 Les Paul:

Testing the Treble Boost, from 0 to all the up

In this one, I have the drive set to noon, and the volume set to unity, so all the grit is coming from the pedal. Not really my favorite setting. But apparently, it’s the same with the Klon. It was best used with predominant boost against an amp on the edge of breakup, then add gain to taste.

This next one is with the pedal in its sweet spot for my R8: Volume at 12, gain at around 10am, and EQ at about 2pm.

Finally, I did a quick lead in the lead break of a song I wrote.

Overall Impression

Notice I didn’t do a “Fit and Finish” section as I normally do. EHX pedals are very well-constructed. I’ve never had a problem with one dying on me because of structural issues. Frankly though, the Soul Food isn’t going to win any beauty contests. It’s just a Hammond box with a sticker placed on the top. But who cares? It’s job isn’t to look good; it’s to sound good, and it does that in spades!

I always say that I’m done with overdrive pedals. And to be honest, once I got my Timmy, it was pretty much game over. The Timmy is truly what I’d consider a transparent overdrive. The Soul Food isn’t all that transparent, but it will surely be a great addition to my board, and I’m hoping a great stacker (haven’t played with that yet).

I’ll say it one last time: The Soul Food stands on its own as a great overdrive pedal. I don’t bandy about 5 Tone Bone ratings. There’s a reason this got my highest score: It sounds so good that it’s gone directly to my board and staying there!

Read Full Post »

tl_pedal_bagtl_boxWhen I first made contact with Circus Freak Effects in mid-December, I came away from the meeting with the feeling that these guys mean business. It wasn’t enough just to create great pedals, the whole presentation was important from the enclosure all the way to the packaging, then to top it off, the pricing had to be such that the products would be accessible to a wide range of players.

Having been in various startups over the course of my career as a software engineer, this approach is something that has always reverberated with me. In the last few years, I’ve been in one successful startup and am currently in one that I believe will also be quite successful. With either of those companies, it hasn’t just been about the technology, but the whole package. The overshadowing philosophy is simple: Not only does our product have to be good, it has to look good and be priced competitively as well.

The guys at Circus Freak get that. When I opened the shipping box yesterday and remove wrapping from the Tatooed Lady box, I was blown away by the quality of the packaging. Sliding the cover off the box revealed a velvet-like bag that contained the pedal itself. Taking the pedal out of the bag, I was greeted by an enclosure the likes of which I’d never seen before. This wasn’t your typical Hammond pedal enclosure. This was a fully custom enclosure with a bottom that is obviously meant for something other than just sitting on a standard pedal board (in fact, Circus Freak is working on a board for mounting their pedals). tl_bottomFinally, included in the box was a small Ziploc bag with rubber strips for the bottom and a special Allen wrench-like tool for opening the enclosure (all Circus Freak effects will be tweakable). The point to all this is that the attention to detail that has gone in to every aspect of delivering a product to the customer is evident. Circus Freak means business, and they’re not going to settle on being a pedal company that looks as if it’s run in the garage of one of the guys’ houses. Here’s the kicker: The Tatooed Lady Overdrive is only $149! The packaging alone implies a much higher value, but to have it at that low price point makes it immediately attractive!

But of course, we’re talking about an effect pedal so not only does it have to deliver on appearance, it has to sound good as well. On that front, all I can say is, “WOW!”

That kind of reaction doesn’t happen to me very often. It’s actually unusual that I dig a pedal’s tone when I have everything set to 12 o’clock, but I totally dug this tone. For me, the first thing that I look for in an overdrive pedal is that my sound should “feel” bigger; that it’s my same tone, just more of it, and not necessarily volume. That’s what the Tatooed Lady does; it gives you more of your tone. But that “bigger” feeling is also attributed to what’s obviously a bit of compression being added to the signal. In some overdrives, the compression isn’t quite as evident. But with this pedal, it’s pretty obvious. But that is not at all a bad thing as my fundamental tone doesn’t change with the pedal.

For my initial audition, I plugged the pedal straight into my VHT Special 6. I was in my living room, so I didn’t really need much volume. But the VHT also has a lot of clean headroom on top of using a 10″ Jensen Jet Electric Lightning which gives the amp a lot of bottom end; making it sound A LOT bigger than its 6 Watts would suggest. The clean headroom would let me test the pedal’s drive on its own, and not rely on amp breakup. After playing around with it like that, this pedal could easily stand on its own as a clipping device!

In the time that I spent with it this morning, I found that I loved using the pedal purely as a breakup device. I set the volume at just past unity, cranked up the Gain knob on the pedal almost all the way, then set the Bass and Treble knobs to about 11 am and 1 pm respectively. At that setting, I could get this gorgeous, searing, but open overdrive with my guitar volume dimed, but I could also back off the volume on my guitar and the pedal would “calm down.” The dynamics are incredible, though I would fall short of calling them tube-amp-like dynamics. Suffice it to say that the pedal is very responsive to attack and volume knob adjustments.

The pedal also has some awesome sustain. I was absolutely digging playing long notes because the sustain of the pedal ensured that I’d get lots of overtones and subtle harmonics. Playing those long sustained notes what driving my little dog nuts as she started to howl whenever I played a high, bent note. 🙂

In my initial conversation with the Circus Freak guys, one thing that they kept on telling me was that they wanted to make sure that their pedals had LOTS of volume. They weren’t kidding. This pedal has lots of volume on tap, so whether you want to use the pedal as a standalone clipping device at unity volume, or use it as a booster to slam the front end of your amp, you have that choice. With the volume that this pedal is capable of, you can really get your pre-amp saturated quickly.

On a final note, I was very impressed with how quiet the pedal was when engaged; no line noise whatsoever, which made me think right away that I will probably be using this pedal for recording in my upcoming session.

Initial verdict? I love everything about this pedal so far: The way it looks and the way it sounds. I’ll be using it at my church gig this afternoon, so I’ll be writing up a gig report on it later. I’m so excited to try this out in a real live situation!

Read Full Post »

TC Electronic MojoMojo OverdriveSummary: This is a no-frills dirt pedal, and that’s a good thing. With toggle-switchable voicing and very responsive EQ controls, dialing in the pedal to work with your amp is a cinch! This overdrive will add an ever-so-slight dark coloring to your tone when active, but that’s a good thing as well.

Pros: Amp-like dynamic response. Works great as a dirt enhancer, and was obviously made for stacking. Nice, open distortion, and sags nicely at higher gain settings with minimal compression.

Cons: Can sound a bit compressed and mushy if EQ is not dialed in correctly, and finding the sweet spot can take a bit of time.

Price: $129.00 Street

Features:

  • Active Bass and Treble EQ controls
  • Drive and Level controls
  • Voice Toggle (up = flat response, down = slight treble boost for thicker-sounding guitars)
  • True Bypass

Tone Bone Rating: 4.75 ~ Yet another winner from the TC Electronic compact pedal line! As sort of a “mainstream” kind of overdrive, I really didn’t want to like this pedal. But after I got it dialed in with my amp and guitar, I found that I REALLY like this pedal!

Maintaining my objectivity is the hallmark of this blog. And when manufacturers send me gear, I am extremely careful to be honest with my reviews; not just in my writing but also honest with my tests; always doing my best to give the gear a fair shot. I want to exhaust all possibilities before I render a verdict – especially if I don’t like something, though that is certainly not the case with the TC Electronic MojoMojo Overdrive. As I mentioned above, I REALLY like this pedal and am impressed with it for a variety of reasons. Here are a few:

  • First off, this pedal is absolutely no-frills. One of the slogans that TC Electronic has used in the past is “No frills with a sound that kills.” That’s a very apt description of the MojoMojo. With this pedal, you set the voicing and EQ to match your guitar and amp, then set the level and drive where you want, and well… play.
  • Also, unlike a high-end overdrive like the Keeley Luna Overdrive that I recently reviewed that employs a fairly sophisticated Baxandall EQ that can drastically affect the voicing of the pedal to produce different overdrive sounds, the MojoMojo produces one type of overdrive. Once you dial in the EQ, you just adjust the drive and level to how much you need at a particular time.
  • I found that treating the pedal as if it was another gain stage in front of my amp worked best, as the pedal was designed explicitly to act with tube amp-like dynamics. Like high-end pedals, it’s super-responsive to pick attack and volume knob adjustments just like you’d expect with a tube amp. Very nice.
  • Though relatively inexpensive compared to other TC Electronic pedals – it’s $100 less than the Nova Drive – the quality that obviously went into the pedal from both a tonal and mechanical perspective is apparent. Tone-wise, the overdrive is open and smooth, with great note separation. Physically, the pedal is simply very well made. The knobs move smoothly but with good tension, and the on/off switch seems rock-solid. This is the type of quality that I’ve come to expect out of TC products.

I’ve known about this pedal for over year, and have read feedback on forums. From what I was able to gather, it’s a split-decision with how people feel about this. The people who like it, love it; there wasn’t much negative feedback that I found, but more tepid responses along the lines of “I couldn’t dial in a good sound with this pedal.” That actually puzzled me because even though I recorded playing through my DV Mark Little 40, I tested the pedal with four different amps and was able to get a great sound out of all of them.

What I came to realize is that more than any other pedal I’ve tested and reviewed, overdrive pedals are the most challenging to get to work in a rig. Dialing in EQ is usually pretty easy for me  (there are exceptions, like the Keeley’s Baxandall tone stack that took me awhile to dial in because that was unfamiliar territory, EQ-wise). Where overdrives are challenging is balancing the distortion and level gain to fit with the amp. This is where I take a lot of time because I have to make a decision: Where do I want the distortion to come from? With some pedals, it’s better to get most or even all of the distortion from the pedal, with level set to unity gain. With others, I might want just a touch of distortion from the pedal, and add more level gain so that my pre-amp tubes do most of the work. Still, with others both amp and pedal may share equal duty.

With each different amp I tried the pedal with this evening, I had to go through the process of finding where I wanted the distortion to come from. With my DV Mark Little 40 (with 6L6’s), I found the best result was to let the pedal do a lot of the heavy lifting, and I set the level to just past unity gain so I could get a little volume boost, plus push my pre-amp tubes just over the edge to slightly break them up. Then I could vary the amount of drive to my heart’s content. On the other hand, with my Aracom VRX22, it was a more balanced affair, with the amp and pedal taking equal responsibility for the overdrive.

I think this is where a lot of people who didn’t really like the pedal – many claiming the tones to be too thick and harsh – may have strayed a bit in their evaluations. Quite simply, dialing in overdrive takes time because not only are you dealing with a clipping section, you’re also dealing with level gain. Add getting EQ dialed in, and it can get a bit hairy. Looking back, I’ve perhaps panned a lot of overdrives simply because I didn’t take enough time.

As for the MojoMojo, getting the pedal dialed in took less than a 1/2 hour. At first, I had everything at noon, but at that setting with my Les Paul and my DV Mark that outputs into a speaker that has a pretty big bottom end, the tone was a little muffled. Thank goodness for the voicing switch on the pedal. That cleared things up a bit almost immediately, then rolling off the Bass to about 11 o’clock and boosting up the Treble to about 2 o’clock added all sorts of clarity. With the EQ set, I was able to vary the Drive and Level, and maintain clarity, no matter where I set those controls.

How It Sounds

To me, the MojoMojo sounds killer. It’s mostly transparent, but it does have a bit of a darker color to it. There’s lots of midrange on tap, but apparently TC Electronic designed the pedal to retain lows. What has really sold me on the pedal though is its amp-like dynamics, which are superb. Here are some clips that I did:

The first clip, I wanted to demonstrate the response to volume knob adjustments. The first part is my amp with my Les Paul in the middle position with both volume knobs at 5. In the second part, I switch on the pedal, and you can hear how well the pedal’s breakup blends with the amp breakup. In the final part, I do a simple lead line with the pedal engaged, then crank up my bridge pickup. The pedal really responds!

In the next clip, I cover more dynamics; basically following the same pattern as the first: Amp only, guitar volumes at 5, then pedal enaged, then bridge pickup cranked:

The thing that’s very noticeable in the clips above is that the pedal loves a lot of input gain, and like a tube amp, with more input gain, reveals more sonic content in the form of harmonics and overtones. By the way, the pedal was set in both clips with Level at just above unity, and Drive at about 2 o’clock.

Finally, I thought that I’d try it out within the context of an actual song. In this clip, it’s the bridge section from a song that’s going to be on my next album that’s actually played underneath the vocals, which I muted here. For this, I had the Level at about 3 o’clock and the Drive at 11 o’clock, which slams the front end of my amp, plus adds a healthy amount of distortion. The result is a very touch-sensitve, singing overdrive distortion.

The original track is actually a bit on the brighter side. But what I love about this particular track is the darkness of the tone. I feels so much richer, and though there’s a LOT of gain with the combination of the pedal and amp overdriving, there is a distinct smoothness to the tone. To me, it’s very magical.

Overall Impression

It shouldn’t be too hard to deduce that I dig this pedal! I’m a huge fan of open-sounding overdrives, of which the MojoMojo produces. But that slight darkness is absolutely killer! I think this is a pedal that I intend to keep for awhile. Can’t wait to bring it to a gig!

Read Full Post »