Feeds:
Posts
Comments

Posts Tagged ‘fishman’

Now that I’ve rejoined my old farts classic rock band, I’ve started getting regular GAS attacks again. Damn! But I’ve gotten wiser about gear over the years and manage to resist my natural compulsions to get gear. That said, having not played out in a while, my gear has been showing its age. And let’s be honest at 60 years old, so am I. And approaching that senior citizen age of my life, I’m just no longer willing to lug around heavy gear. When I got my Tone Master Deluxe Reverb, weight was a huge factor in my decision besides freakin’ awesome tone.

And so it goes with my acoustic amp. One of the great things about rejoining my band is that I’m no longer the only lead guitarist. I switch off solos with the other guitarist, and quite frankly, he plays way more solos than I do – I admit it – simply because he’s better than me. But this means that I also have some freedom to not just play electric. I can play my acoustic as well, and that totally pleases me!

To that end, adding that dimension to our sound comes with its own challenges, not the least of which is the fact that my only really good acoustic amp is a 1981 SRS California Blonde II. It is a sensational amp. But it weighs 75 lbs! That was not going to work for me. So I went on a search for a compact acoustic amp that I could use both as a reference monitor while I’m onstage and one that I could plug into our board.

I was all set to get an AER, but decided to take a look at other amps and came across the Fishman Loudbox Mini. After watching and reading some reviews online, I saw that my local GuitarCenter had one in stock. So I drove down there and tried it out and half an hour later, walked out of the store with one.

Thus far, I’ve played it at my weekly church service, using it as a reference monitor and running the DI into the church’s PA. It sounded great through the PA, and I actually ran the EQ flat out of the mixer as the tone was nice and rich. I also played it at band rehearsal last night to see if I should add an acoustic guitar to our sound. There was unanimous agreement that this will provide a great contrast to our sound. I’m SO jazzed to be using it in this coming Friday’s gig!

From a usability perspective, the amp is straightforward as can be! The EQ is incredibly responsive but not so sensitive that I have to make micro-adjustments to the different levels. The built-in hall reverb is generally good, though I tend to keep it at very subtle levels (I’ll explain below). The chorus is actually very nice, and at lower levels adds a little tonal grease to the overall sound. I dig it!

Circling back to the reverb, the reason I keep it low is that at volume, there’s a certain depth and richness to the sound that I feel reverb would only muddy. The whole purpose of reverb is to provide depth. But the way the sound is projected from the amp, I feel that I just don’t need more depth. It’s actually a little uncanny and totally unexpected, and you only get it at performance volumes. At low volumes, the amp is like any amp – very directional. But when you up the volume, the sound takes on a 3-dimensional quality!

Overall, this was a great purchase! And at $369, it has a sound that rivals amps that are 3-4 times more expensive. No, it’s not an AER. But it’s not trying to be. This is a great workhorse amp that I just know I’m going to get a lot of mileage!

Read Full Post »


Click to enlarge

Click to enlarge

Fishman SA220 Solo Amp

Summary: Compact and weighing in at just 25 lbs., the SA220 Solo Amp is an ideal PA solution for the solo acoustic guitarist/vocalist, but it’s versatile and loud enough to be used as a PA for a band (if you have a couple of them).

Pros: It may not have the Bose name, but I’d put this up against the L1 Compact system any day. With built-in, independent, 3-way EQ, and a variety of other features, if you’re a solo acoustic artist, you owe it to yourself to check this unit out! I got it set up in less than a minute!

Cons: None

Features:

  • Drivers
  • – Six 4″ mid-woofers, patented dual gap, high excursion design, neodymium magnets (200W)
    – One 1″ neodymium soft dome tweeter with level control (20W)

  • Auxiliary Stereo Input with Level control
  • Four Digital Reverb effects with master level
  • Balanced XLR D.I. outputs for both channels and main mix
  • Independent effect loops for Channel 1 and Channel 2 (OMG!!!)
  • Unique Monitor I/O for improved on-stage ensemble monitoring
  • Mute with remote footswitch input
  • Tuner Output
  • Ships with Stand and padded Carry Bag (w/ wheels)
  • Dimensions: 41.5″ H x 5.6″ W x 6.6″ D
  • *Weight: 25 lbs without Stand, 35lbs with Bag and Stand

Price: $999 Street

Tone Bone Score: 5.0 ~ Talk about ease of use! As I mentioned above, I got the SA220 set up in less than a minute! And my Yamaha APX900 sounds absolutely killer through this, not to mention the great clarity of the vocals. This is a winner, folks!

Year over year, I play between 100 to 150 gigs a year, with about half of them as a solo acoustic act. My solo gigs have consisted mainly of my weekly restaurant gig, but I do lots of weddings and special events throughout the year as well. Of late, the restaurant I gig at moved my act outside in a public patio area as the weather is gorgeous.

To make a long story short, even though the restaurant has a decent PA system, I ended up bringing my own PA last week, which was the first week we did the outdoor show. That worked pretty well, and my PA has a great sound. But it also made me realize that the old mixing board, and big 300 Watt speakers was just too much gear to haul around. Even if I ended up using the restaurant’s PA, which is a nice one, I’d still have to lug the board and speakers and stands down from the office upstairs. Enter the Fishman SA220 Solo Amp.

Plug It In and Go!

I finally received my SA220 today after having to wait for a couple of weeks for it to arrive (had to be ordered). So when I got home, I knew I had to try it out to see how it sets up, and of course, to work out kinks before I gig with it. There’s nothing worse than fighting your rig or sound DURING a gig – especially when you’re solo.

The guys at the shop assured me that Fishman’s claims of easy setup were true. I am now a believer! I had the SA220 set up in exactly 42 seconds!!! That didn’t include hooking up my pedal board, guitar, and microphone, but I had the system on its tripod stand and plugged into power, ready to go, in that short amount of time. That just blew me away! Plus, everything you need to get up and running fits into a single carrying unit that consists of two bags: One for the array/PA, and one for the tripod that buckles to the main bag. Talk about convenience! Fishman really had the solo artist in mind when they built this!

How It Sounds

For my audition, I just plugged my guitar into the SA220 directly, and hooked up my microphone. All I can say is that the sound is spectacular! I was actually concerned about the bass response of the unit, but apparently Fishman distributes the bass response among the six main mid-woofers. It may not get boomy with the bass, but the sound is absolutely rich, and vocals are clear and full. Normally, I use a DI to go into a board – and will probably do the same with this unit, but my guitar sounded clear and natural and full plugged in directly without those annoying high-end transients and flattened tone that is so annoying with plugged in acoustics. Admittedly, the ART system in my Yamaha APX900 has quite a bit to do with that, but Fishman really knows how to condition sound.

At first, I had a bit of a problem with feedback, but setting the phase switch and tweaking the anti-feedback knob (it’s a variable frequency notch filter designed to subdue a resonant peak – just turn it to where the feedback gets reduced or eliminated – very cool), and attaching the rubber sound hole cover on my guitar took care of the feedback problem.

Luckily no one was home when I tested the SA220. I set it up outside so I could see how it performed. Damn! Even with just 220 Watts, the SA220 is LOUD!!! I had the Master volume set at around 10 am, and that will be enough to fill the large patio space I’ll be playing in tomorrow! It’s not a stretch to say that the SA220 can cover a lot of venues.

As far as listening angle is concerned, the SA220 disperses the sound incredibly well! Even at extreme angles, where I was almost even with the array, the sound was clear with good volume. Of course, narrower angles are better, but this unit will have no problem playing in the open space I’ll be playing.

Talk About Bang for the Buck!

The sound is great, but I have to tell you, I was ready to get the Bose L1 Compact, which is a great unit, but the mere fact that if I wanted more EQ control and other features, I’d have to spend another $499 really soured my taste for the unit. On the other hand, Fishman has packed all sorts of features into the SA220 that make it hands-down the better value. Independent 3-band EQ for each channel, phase and anti-feedback control, 4 types of digital reverb, a mute switch (that is REALLY handy!), independent balanced XLR outs to go into a board, and my favorite feature: independent effects loop for each channel! You just can’t argue about with what comes built-in on this unit!

Overall Impression

It’s hopefully obvious that I love this unit! For me as a solo artist, it’s a true game changer! It’s light and versatile, and the sound is spectacular. What more could I ask for?

Read Full Post »