Feeds:
Posts
Comments

Posts Tagged ‘guitar gear’

Don’t Make Me Think! On the DV Mark Little 40 Head

Posted in Guitars, tagged , , , , , , , , , , , , on October 11, 2011| 8 Comments »

I mentioned the DV Mark Little 40 at the end of my previous post yesterday, which was a review on the DV Mark Galileo 15. That Galileo is a great little amp, but the DV Mark Little 40 is what I’m really taking a serious look at right now. If you want more information and specs on this great little amp, then read the product page on it. But what I’m going to discuss here goes beyond just the plain old facts and talk about why I think this amp deserves such a serious look.

What about the title? Well, it’s something that I brought over from my web engineering background, and that is that the best web sites aren’t the ones that are the prettiest or the most technically robust. They’re the ones that are so obvious to use, you don’t have to think about it. With the Little 40, DV Mark has lived up to “Don’t Make Me Think” in a variety of ways.

First off, while DV Mark offers the amp in L34 and L6 models (for EL34 and 6L6), the amp can take either, and will even do 6V6’s (though I think it may have to be JJ 6V6’s that’ll take a higher plate voltage – but I’d have to confirm that). But here’s the kicker: With the Little 40, you’ll never have to bias tubes again! The Little 40 sports smart circuitry that will auto-bias AND match your power tubes (so long as they’re within 20% of each other). How convenient is that? I don’t have the equipment to bias tubes myself – frankly I’m scared to death of working on electrical stuff – so every time I get new power tubes, I have to have someone bias them for me. With the Little 40, I just need to get reasonably matched tubes, and the amp will bias them to their optimal settings. Damn!

In addition to automagically biasing the tubes, there’s a switch on the rear panel that lets you set Low or High bias settings, which means you have even more tonal capabilities at the flick of a switch. This is a really huge thing in my opinion because again, instead of having to do this by hand, you need only toggle a switch to find the right bias setting for what you’re playing.

Also, the Little 40 is absolutely versatile, with its patent-pending Continuous Power Control that allows you to vary the output power of the tubes – not just for volume, but to break up the power tubes early. Full out to 40 Watts, you’ll get maximum clean headroom. But you can dial down the power to 1 Watt, and get breakup a lot earlier. Plus, you can switch between pentode and triode tube operation to get different tones on top of bringing the power down. Then on top of all that, you have a 0/6dB pad to compensate for passive and active pickups.

Finally, at $799, which is only $200 more than the Galileo, getting this amp is absolute no-brainer! And mind  you, these amps are all hand assembled in Italy. How DV Mark is able to sell them so inexpensively is beyond me, but we players can definitely reap the benefits. This is my next amp!

Here’s a nice demo video of the DV Mark Little 40:

Read Full Post »

There’s Nothing Like the Aracom PRX150-Pro!

Posted in Guitars, tagged , , , , , , , , , , on October 3, 2011| 1 Comment »

As many know who’ve frequented this blog over the past couple of years, they know my love for the Aracom PRX150-Pro attenuator. It has allowed me to record in my garage till the wee hours of the morning, and not get complaints from my wife or the neighbors about being too loud, as I can get down to conversation levels; but more importantly, I can get down to those levels and still retain my tone and especially my dynamics.

With other attenuators, as you increase attenuation, it’s like putting a blanket over your tone. Not so with the PRX150-Pro. I’ve been using it now both in the studio and at gigs for the last couple of years, and it never ceases to amaze me.

For instance, I shared a song the other day called, “Come Together.” I’ve since changed the name to “God’s Love Will Set Us Free” but what I failed to mention was that the electric guitar parts were recorded, close-miked with the volume level being normal conversation level! Though I was using just a 6 Watt amp, even that cranked up is simply too loud to be playing completely cranked at midnight – at least in my neighborhood.

Here’s the final cut of the demo. The electric guitars haven’t been tweaked except for adding just a touch more highs in the EQ (the original tone was fine, but I wanted the guitars to cut through the mix a bit better because there was lots of overdrive):

What great quality at normal conversation levels!

I know, there are those out there that poo-poo the whole attenuator thing, and that’s fine. But for me, I couldn’t live without it – especially in my studio. It’s saving my ears. 🙂

Read Full Post »

You Ever Have One of Those Gigs Where…

Posted in Guitars, tagged , , , , , on October 2, 2011| 3 Comments »

…everything just sounds and feels… BAD?

I just got done with my weekly church gig this afternoon, and I have to admit that I was not in the least bit happy with my tone. It completely affected how I played; which felt choppy and contrived, not smooth and spontaneous.

I suppose we’re all bound to have those kinds of gigs, but I have to tell you, nothing puts me in a worse mood than having bad tone.

To be fair to my gear, my clean tone was fine, but my overdrive tone was absolutely muddy. It had no punch, and even with the volume up, I wasn’t cutting through the mix. Ewwwww…

Oh well, I’ll have to play around with my setup a bit…

Read Full Post »

New Song: Come Together

Posted in Guitars, tagged , , , , , , on October 1, 2011| Leave a Comment »

No, it’s not a Beatles cover… 🙂 This is a song about getting over ourselves and listening to God’s voice and feeling His presence in our lives; putting ourselves together with His help.

I got a little inspirational kick while I was recording with my little VHT Special 6 which I used for the electric guitar parts. I had it totally cranked up, ran it through my Aracom PRX150-Pro and out to my 1 X 12 that has a Jensen Jet Falcon in it. Man! That amp sounds A LOT bigger than it’s diminutive 6 Watts. For the left channel guitar, I used my Strat in the bridge position, then used the neck position for the right channel to get a ballsier sound.

Anyway, here’s the song:

[audio https://guitargear.org/wp-content/uploads/2011/10/come-together.mp3]

 

Read Full Post »

New Gear: Gibson Firebird X “System”

Posted in Guitars, tagged , , , , , , , , , , , on September 29, 2011| 5 Comments »

Okay, boys and girls… After announcing this guitar over a year ago, Gibson has finally released the Firebird X er… system. Not just a guitar, this baby packs built-in effects, completely on/off switchable and coil-tapped pickups. It also includes a piezo pickup for getting an acoustic sound. But wait! There’s more! The pickups can be switched to run in series and parallel. But we won’t stop there! The on-board effects can be controlled by sliders on the upper bout of the body, and with the included switch pedal, you can activate those effects.

But just to make sure Gibson didn’t forget anything, they also include an expression pedal for the effects. By the way, the effects are all programmable via USB interface to a computer. Oh yeah… There’s also a boatload of software included.

Even the case is revolutionary (Gibson’s words). It’s lightweight, and includes the obligatory straps, but it’s strong enough to withstand a fall from a six-story building (I wonder if that’s with the guitar in it). 🙂 Oh! And let’s not forget the robot tuning system.

So what’ll all this cost? Supposedly, somewhere in the neighborhood of US$5500.

My thoughts? I’m not sure. It’s certainly very cool. All this in a 7 pound guitar! Wait! It’s not a guitar, it’s a system! 🙂

It certainly is a system, and mind you, I only mentioned a fraction of the features of this guit… er… system. The technology that has gone into it is pretty amazing in both breadth and depth. That, I can’t deny. And to have your pedalboard right in your guitar is pretty freakin’ cool – ala Matthew Bellamy of Muse.

There’s a part of me that says this screams of overkill. But on the other hand, it’s not as if this guitar will be a high-production model. It’s a limited edition. But who knows? If demand is high, Gibby may turn it into a sales platform.

Also, for myself, and myself only, I just want to play. I’m not sure that I’d want to spend a lot of time niggling over effects patches. And besides, though the effects may very well be good – perhaps even awesome – I’ve got the effects I like on my board, and for the most part, especially for my modulation effects, I rarely change where they’re set to (well… except for my Deep Blue Delay).

Don’t get me wrong. I’m really not trying to be cynical here, but something like this would take me awhile to dial in. Like I said, I’d rather pick up a guitar and just start playing, knowing what sounds the guitar will make.

For more information, check out Gibson’s Firebird X site!

Read Full Post »

On the Strat Middle Pickup

Posted in Guitars, tagged , , , , , , , , on September 22, 2011| 5 Comments »

My American Deluxe Strat is the very first Strat that I actually liked. A lot of it has to do with the pickups, which are Kinman Hx noiseless single coils. These have a bit more output than stock Strat pickups and they make a HUGE difference in the tone of the guitar; fattening up the sound significantly.

Traditionally, I have absolutely abhorred the middle pickup of Strats. To me, with the stock set, though it is mid-rangy, which is a tone I like, I always felt the middle pickup was a little lifeless. Even EVH with the Frankenstein removed the middle pickup, and replaced the bridge pickup with a humbucker I suppose to fatten up his tone. With my Kinmans, the tone is not quite ‘bucker-fat, but it is much fatter than the stock pickups. As for the middle pickup, it’s my favorite pickup on the guitar when I’m playing with distortion. It produces tons of mid-range that cuts right through a mix.

Plus, at least to me, it has the best balance of sustain and fatness to simply be an ideal pickup. Take this demo that I recorded this morning called “The Way The Truth The Life:”

I actually recorded this a few years ago, but couldn’t get a groove with the song. So I finally got it put together, and after I recorded the acoustic guitar and piano parts, realized that it needed a driven electric guitar sound; specifically, my Strat through a cranked Marshall. 🙂 To be honest, I tried recording with the neck pickup which is my usual go-to pickup, but that was way too fat, and the bridge pickup was way too thin. But the middle pickup was just right… (yikes! sounding like Goldilocks and the three bears).

When I spent time with Doug Doppler way back when, he talked about the middle pickup being one of his favorites. I personally didn’t “get it” at the time because up until that point, I hadn’t heard a middle pickup on a Strat that I liked. But after recording this song, I’m sold. When I want a smooth drive with lots of mid-range, the middle pickup is it!

Read Full Post »

The Perfect Guitar…

Posted in Guitars, tagged , , , , , , on September 12, 2011| 7 Comments »

There are “go-to” guitars and there are “go-to” guitars. But do you have one that’s just.. well… perfect? I do. It’s my Gibson Les Paul Standard 1958 Reissue. To me, that tea burst is absolutely sexy, but more importantly, when I play that guitar, I feel that I can do just about anything. The neck is perfect on this guitar. It’s a fat neck, but not anything like a ’57’s baseball bat girth. And every time I play this guitar (her name is “Amber”), I just feel so confident. I can switch from rhythm to lead and back again, and with Amber, I feel as if I can express my creativity freely.

Mind you, this is purely subjective. Everyone will have their own perfect guitar, and their own idea of a perfect guitar. But for me, I’ve found my perfect guitar.

But what about my others? I still play all of them because there are tones that Amber just can’t create. Take, for instance, my Gretsch Electromatic. It has an almost acoustic tone to it; so much so that I use it for my solo acoustic gigs. And because it’s an electric, I can play that guitar for hours, and never get tired. And of course, getting that jangly, Strat single-coil sound just can’t be gotten with a Les Paul.

But luckily for me, most of tunes require a fat, sustaining tone, and there’s nothing like a Les Paul – at least for me – to deliver that.

Read Full Post »

I think I found my next PA system (or at least it’s on my wishlist)…

Posted in Guitars, tagged , , , , , , , , , on September 8, 2011| 23 Comments »

If you look on my rig page, you’ll see that for my solo gigs, I use the very wonderful Fishman SoloAmp. This is a great, integrated PA that I’ve been using to great success for the past year or so. Very easy to set up, and it has a nice on-board mixer with decent reverb effects (which I never use, since I always use my vocalizer’s reverb). But the other day, I demoed the HK Audio Elements system while I was browsing “The Music Tree” in Morgan Hill, CA. This is an audio system that is similar to the Bose L1, but unlike the Bose L1, the Elements system allows you to expand by adding more “elements” as your audience size grows. Super-cool!!!

Sound-wise, I plugged an acoustic guitar directly into the system, and was absolutely blown away by the sound! While I love my Fishman, and it has served me well, compared to something like the Elements system, a subwoofer really makes a difference, despite the fact that the SoloAmp’s speakers have good bass response.

But honestly, this entry isn’t about the Elements system. 🙂 While trying to get more information online about the Elements system, I ran across another, just-released, integrated PA system from HK Audio called the Sound Caddy One, that is based upon the same audio technology as the Elements system. But with the Sound Caddy One, there are NO parts to put together! The line array is housed within the PA’s body (which also serves as the housing for the subwoofers), and to set up the system, you release the line array, that pops up out of the housing, secure it, plug in, turn on and you’re ready to go! Damn!

Check out this demo video from Musikmesse 2011:

Here are the Sound Caddy’s technical features:

Model SOUNDCADDY ONE
Max SPL calculated 125 dB
Max SPL peak 125 dB
Max SPL 120 dB @10% THD
Output power system 600W Class D
Frequency response +/- 3 dB 49 Hz – 18 kHz
Frequency response -10 dB 42 Hz – 18 kHz
Connections integrated 4-channel-mixer
LF Speaker 3x 6″
Mid/High Speaker 6x 3,5″
Directivity 70° x 15°
Crossover frequency 150 Hz, 12 dB/oct.
Enclosure 15 mm (5/8“), 13-ply (plywood)
Dimensions (WxHxD) 27 x 102 x 34 cm 10-5/8“ x 40-5/32 x 13-25/64
Weight 29 kg / 63,9lbs

Delivering a max 125dB at 600 Watts, this unit can move some air. Some people have said it isn’t powerful enough for their uses, but for a solo musician, this is more than enough power! Also, I have to question the negative feedback because systems like this are all about sound dispersal, getting an even volume anywhere within the sound dispersal cone which, for this system, is 70 degrees. When I first started using a line array system, it took me awhile to get used to the volume seemingly not being as loud. But it’s deceptive with a line array because the sound actually reaches fairly extreme angles, and what you’re trying to do is get your sound dispersed, and not necessarily through volume.

I dig that unlike the Elements system which is pure sound reinforcement, this has an integrated 4-channel mixer, which is an absolute MUST for me. But the only thing that I’d be wary of is the stability of the system. The base seems rather narrow, and I’m wondering how it would fair in windy conditions. In any case, here’s another demo video that demonstrates the sound. The singer aside, even through the camcorder’s microphone, it’s clear that the Sound Caddy One provides some very clear, clean sound.

As for cost, the video above mentioned a price of “2000.” If that’s in German deutsche marks, then the price would be around $1450 USD. That’s not bad, even as an MSRP, which would make the street price even lower. I’ll have to find out more information.

In any case, for more information on HK Audio products, go to: http://www.hkaudio.com.

Read Full Post »

Gear Review: Awesome Guitars TCP-T2 Telecaster Control Plate

Posted in Guitars, tagged , , , , , , , , , , on September 6, 2011| 2 Comments »

Awesome Guitars TCP-T2 Telecaster Control Plate
Summary: Want to expand the tonal possibilities of your Tele? This solderless control plate assembly will give you six distinct tones.Pros: Undoubtedly, the pros here are that you’re going to get tones that you’ve never heard from your Tele.

Cons: Not quite as easy to install as advertised – but what is? One of the bridge settings created a far too thin and reedy tone for my liking. As there were no instructions to be found as to what switch does what, it took awhile to figure out the different switch settings (though note that the wiring diagrams are all available online).

Features – Check out the link above…

Price: $127.97 direct

Tone Bone Score: 4.5 ~ Though I didn’t like that one setting for the bridge pickup, I do like the fact that I have a couple more very usable tones for my Tele.

I’m pretty wary of hyperbole, especially when it comes from a manufacturer. So when Awesome Guitars contacted me about their products, I was a little dubious, especially since the original email read like an Adam St. James guitar lessons spam. It’s not that I doubted what their Tone MultiplierTM could do, it was the delivery that made me a bit wary. But having an open mind, I replied to see if they’d send me a control panel replacement unit for my CV Tele. I got a very quick reply saying they’d send one right away. That was about six weeks ago. Due to vacation, and leading a busy life in general, I didn’t get the unit installed until recently, but since then, I’ve been messing around with my Tele a lot, and have played it in a couple of gigs.

So what’s the verdict? The manufacturer’s claims of the products being life-changing aside, this is a solid product, and something that I’ve been able to put to use. To be fair though, the unit I tested will only give you 6 different tones. But with dual humbuckers, the other products they offer will give you up to 68 different tones! Pretty amazing stuff.

Ease of Use

Okay… so you lose the sliding 3-position switch, which is replaced by three mini-toggles. On the surface, that might seem to be a burden, but once you’ve played around with the system, it’s fairly easy to get to the tones you want. Even without the instructions, I was able to figure out the functions of the switches relatively easily, and was up and running- and gigging – in a matter of an hour. By the end of the gig, I knew where I wanted the switches. Admittedly, it will take a little more time to switch on the fly during a song, but I was still able to do it pretty easily, if not completely cleanly.

How It Sounds

Sounds like my Tele, but with a couple of more very usable tones. I wish I had the instructions that charted what switch does what, so I could tell if the pickups were in or out of phase or serial or parallel when both are on, but I did manage to figure out the two different sounds for each different pickup combinations. In a way, I’m sort of glad I didn’t have the instructions because it forced me to explore what tones worked for me, which is probably more important than the actual knowledge of each switch configuration. That would probably be a different story if I installed the six-switch model on a dual-humbucker guitar. For that, I’d want to know what each switch is doing.

In any case, here are six versions of the same phrase with each different configuration:

Neck 1

Neck 2

Both 1

Both 2

Bridge 1

Bridge 2

With both pickups on, and switching between parallel and serial configuration (mind you, I still don’t which is serial or parallel), the tonal difference is extremely subtle, and admittedly the recordings didn’t seem to capture that, but suffice it to say that I heard a difference; but also, and more importantly, the dynamics were different. Bridge 1 setting was pretty thin – too thin for my liking, but I my favorite is Bridge 2, which gives me the full power of my bridge pickup, which I love for playing leads.

Overall Impression

At least to me, this upgrade isn’t life-altering, but it does expand the tonal palette of my Tele, and that’s a great thing, and who knows, I may find a use for the thin tone of the Bridge 1 setting. With the Neck 2 setting, I get a similar sound to the neck/middle setting of a Strat, which is jangly. I dig that sound for playing finger-style rhythm. So all in all, I’m pretty satisfied with this unit.

As for the lack of instructions, as I mentioned that’s not a bad thing, necessarily – at least the wiring diagrams were online. The site does mention that two of the switches control the pickups, the other switch controls whether the pickups are in parallel or serial. But which two and which one? 🙂 Doesn’t matter because it was easy to figure out.

Read Full Post »

New Gear: Rock Solid Guitar Stands

Posted in Guitars, tagged , , , , , , , , on September 6, 2011| 2 Comments »

The other day, I was at my good friend Jeff Aragaki’s (of Aracom Amps fame) home/workshop and noticed his ProLine multi-guitar stand where he always keeps five or six guitars. I was thinking to myself that I could use one of these in my home studio, as I have at least five guitars and a bass out at any time; especially as of late, since I’ve been recording quite a bit. All my guitars are on individual stage stands, and they take up a lot of space. I was thinking that with a multi-guitar rack, I could put out several guitars and not take up too much space on my studio floor.

But one thing that I thought about when considering a multi-guitar stand was it would be great if there was one made of wood. It just looks better to me. And wouldn’t you know it, today I received an email announcing a new company called Rock Solid Guitar Stands that make their stands out of wood. Cool! Check this out!

THAT is exactly what I was looking for in a multi-guitar stand!

Here’s the press release they sent:

———–

NEW MULTI-GUITAR STANDS FROM ROCK SOLID GUITAR STANDS
Two new models coming in October 2011.

Is your studio, family room, or living space crowded with guitar cases or single stands? Rock Solid Guitar Stands will compliment your space, and more importantly, showcase your collection at the same time. Rock Solid Guitar Stands are multi guitar stands that were specifically designed for the home or studio and designed by a collector. Your guitars and basses will truly be at home, and finally given the attention they deserve.

Unlike the typical metal multi-guitar stands out there, which are not very stable or attractive, Rock Solid Guitar Stands flow quite well in any decor in your home or studio. They are also very stable. For more information visit http://www.rocksolidguitarstands.com.

In October of 2011, we will be introducing “The Classic 4,” and “The Show 5.” These two new multi-guitar stand models will offer an alternative for players with guitar collections of various sizes.

The Classic 4 is perfect for someone with limited space. It is only 33” wide x 28” high x 18” deep.

The Show 5 is truly a unique design. Let’s face it, you want to show off your favorite guitar and have it accessible at all times. That’s why The Show 5 has a specially designed fifth slot which let’s your most precious guitar stand out and get some extra loving!
Be sure to visit Rock Solid Guitar Stands on the web in the following places:
Official website: http://www.rocksolidguitarstands.com
Store: http://shop.rocksolidguitarstands.com
Twitter: http://www.twitter.com/rocksolidstands
Facebook: https://www.facebook.com/pages/Rock-Solid-Guitar-Stands/178352512182913

———–

The stands come in three different colors: Honey, Dark Cherry, and Ivory. Personally, I like the Dark Cherry color. Also, they only weight 12 lbs.; not at all heavy, which is cool. The price is $199 direct, which might be a bit steep, but these are solid wood, not press-board. When you order one, assembly is required, but an allen wrench is provided and you’ll just need an adjustable wrench or pliers. From what I gather, the kit takes less than a half-hour to assemble.

Read Full Post »

« Newer Posts - Older Posts »