Feeds:
Posts
Comments

Archive for the ‘gear reviews’ Category

First Impressions: Dr. Z Remedy Amp

Posted in amplifiers, amps, GAS, gear, gear reviews, guitar, guitar gear, guitar gear reviews, guitarists, Guitars, Music, musicians, new song, tagged , , , , , , , , , , , , , , , , , on October 30, 2009| 3 Comments »

REMIn yesterday’s little adventure at Guitar Player Magazine, I got a chance to play the new Dr. Z Remedy amplifier. This amp is based upon a classic Marshall JTM circuit design, but with a twist: Instead of 4 inputs that allow you to jumper the two channels, the Remedy has a single input and the channels are already jumpered. You then have the ability to blend the amount of high and normal channel amounts via the two loudness knobs.

This amp is a lesson in simplicity. It has a three-band EQ, and the volume knobs for the High and Normal channels, plus Power On/Off and Standby toggles. That’s it. With this amp, you dial in your tone and sound levels, and play!

The amp is powered by a quad set of 6V6’s, and man they sound sweet! The power tubes are JJ’s which have kind of a “hybrid” 6V6 tone – I use these myself, and I love them. They’re brighter-sounding than the classic 6V6, and they’re extremely durable. I’ve never had one of these fail on any of my 6V6 amps, so it’s not a surprise Dr. Z uses the JJ’s for their reliability.

How It Sounds…

In a word, it sounds “big.” A lot bigger than I expected from just a 40 Watt amp. I played a Gibson ’59 Les Paul Special Re-issue through it and was really taken by the big sound that the Remedy produces. For classic rock and blues tones, this is an ideal amp. It responds incredibly well to picking dynamics and volume knob adjustments as well, which is why I mentioned you set your EQ and volume where you want it, then play. You can then adjust the cleanliness or dirtiness with your volume knob or attack. Very cool. You might dismiss the Remedy as another JTM clone as the circuitry is based upon that. But it has a sound all its own. The cleans are lush and defined, and the overdrive is nice and crunchy, and very little to no top-end raspiness. I think that’s an earmark of the 6V6’s. They just don’t get fizzy.

A Great Half-Power Mode

I played around with the half-power switch a couple of times, and it works as expected. But I wanted to find out more about how Dr. Z does his half power mode, so I gave him a call this morning, and found out some interesting things about how he does his half-power mode – very interesting things, indeed. There are a couple of ways I’m familiar with that amp manufacturers introduce half-power modes in their amps. A common way is to shut down half a tube, essentially going from pentode to triode. According to amp builders I’ve spoken with, this is the easiest, but it also changes the tone significantly between the two modes.

The second common way is to adjust the B+ voltage down, then provide some compensation so the correct heater voltages are maintained. This is what Jeff Aragaki does with his amps, and this technique is very transparent.

Dr Z. takes a completely different approach and leaves the front-end alone entirely, and works his magic from the power transformer, something he worked with the late Ken Fisher to produce. I won’t go into details – and Dr. Z didn’t go into a great deal of depth – but he effectively bypasses the power from two of the power tubes then does some other stuff to compensate for the impedance mismatch to half the power. The end result is a very tonally transparent switch from full power to half power, using a method no one else is using; at least according to Dr. Z.

I love stuff like this! I’m no electronics guy, but I love it when people think out of the box to handle common problems, and come up with approaches that no one else thought of, or didn’t try because they thought it was too hard! Kudos to Dr. Z for doing something like this!

I truly wish I had more time to spend with it so I could explore the amp’s capabilities more. Perhaps in the near future I’ll get that chance.

Read Full Post »

NOS Tubes: It Ain’t All Hype…

Posted in 12AX7, accessories, amplifiers, amps, Amps/Amplification, buying gear, ECC83, GAS, gear, gear reviews, guitar, guitar gear, guitar gear reviews, guitarists, Guitars, Mullard, Music, musicians, NOS, tubes, tagged , , , , , , , , , , , , , , , , , , , , , , on October 29, 2009| 4 Comments »

Just put in a re-labeled 1960’s-era Mullard ECC83 into my Aracom VRX22 this afternoon. I had a JJ 12AX7 in there, and make no bones about it; that’s a great pre-amp tube. But the difference in tone between the two is immense. Where my JJ had a great tone, one thing that I noticed was that the highs tended to be rather harsh when the tube was overdrive, and I found myself turning my Tone knob left of center – a lot – to bleed off some of the highs.

But after I installed the Mullard, I was absolutely blown away! The overdrive seemed so much more focused, with zero high-end harshness. It was some of the smoothest overdrive I’ve heard, and definitely the smoothest the VRX22 has sounded since I got it. That’s saying quite a bit because I love the tone of this amp immensely, even without the NOS Mullard. Which brings me to the crux of this entry…

As a tube amp aficionado, I’ve gone through lots of pre-amp tubes, and almost invariably, I’ve gravitated towards NOS tubes to get the tone I like. Some people I’ve spoken to say it’s all hype but, at least to me, it’s not. I suppose for some types of tubes, there’s not much of a difference. For instance, I almost invariably use JJ’s for power tubes because they just sound great to me. They’re well-made, and run pretty hot, and they break up nicely.

But with respect to pre-amp tubes, I’ve found a marked difference between NOS and new tubes. I love Mullard and JAN Phillips tubes for pre-amp tubes. They’re just so smooth sounding, smoother than all the new make tubes I’ve played. Plus, they were made during a time when most electronic devices were run with tubes, so the build expertise, equipment and materials for making tubes was abundant. According to my friend Jeff Aragaki of Aracom Amps, the alloys used in NOS tubes are not as readily available nowadays, and that could account for the difference in tone. Not sure if this is true, but it certainly makes sense. The only drawback is the price. That Mullard sells for $129 retail, and that is by no means inexpensive.

But I look at buying NOS tubes very much like buying a great pair of shoes. For instance, I spend almost $200 a pair for my everyday shoes. These are absolutely comfortable, and not only that they last a long time because they’re constructed so well. In fact, it takes me about 4-5 years to really wear them out. This in contrast to lower priced shoes that I’ve worn out within a few months. After a long period of time, I’ll spend more on the cheap shoes. A better case is my father. His shoes cost at least $500. But they last almost 20 years! He just gets them resoled every few years until the shoe repair guy says that it’s not worth it.

NOS tubes are similar. I’ve had the same NOS tubes in my Hot Rod Deluxe for almost five years, and they still sound great! I play that amp a lot. On the other hand, the new Tung-Sol tubes I put in another amp lasted all of two months before they started to lose their character, with one becoming microphonic. Granted, they’re fairly inexpensive tubes and they sound great, but if I have to shell out $25 every couple of months, that starts to add up. NOS tubes, especially the mil-spec tubes that I prefer were made for military usage, which means they had to be well-built and durable. That’s a huge advantage NOS tubes have over newer tubes.

Jeff also shared a story with me today about a friend of his who used to be stationed on an aircraft carrier. He was telling Jeff that when the ship replaced electronic components, they’d dump boxes of tubes – good ones, mind you – over the side of the ship. So the ocean has NOS tubes littering its bottom.

In any case, please do not just take me at my word! 🙂 This is simply my perception based upon my experience. In the end, as I am often apt to mention, you’re judge of what sounds pleasing to you. So only buy what makes sense to you!

Read Full Post »

EL84 Fizz? Forgot how much I loved that tone…

Posted in amplifiers, amps, Amps/Amplification, aracom amps, attenuator, EL84, GAS, gear, gear reviews, goldie, guitar, guitar gear, guitar gear reviews, guitarists, Guitars, Music, musicians, VRX18, tagged , , , , , , , , , , , , , , , , , , , on October 26, 2009| 3 Comments »

Aracom Amps VRX18 18 Watt Head

Aracom Amps VRX18 18 Watt Head

I’m falling in love again with my Aracom VRX18. This was the amp that first got me introduced to Aracom and my good friend Jeff Aragaki. My amp is actually a tweaked version of the stock VRX18 as it sports an EZ81 tube rectifier, plus a tweaked circuit that adds a bit more sag and sustain. The result is just a gorgeous overdriven tone that really brings out the best of the EL84 power tubes.

One thing about EL84 amps is that if they’re done right, they have a distinctive overdrive tone that creates a subtle top-end fizz when they’re overdriven. I’ve played others that drive the power tubes too much, and they sound very harsh and incredibly compressed. Jeff did this amp right, and while the power tubes do indeed compress a bit, the overdrive tone retains its open character, while adding that nice top-end fizziness that EL84 amp lovers have come to appreciate.

The clip below is an excerpt from a slow blues song I wrote. It features my beloved Goldie plugged straight into the Aracom VRX18, and it also features the insane Aracom PRX150-Pro attenuator! Believe it or not, the amp was recorded at just above loud conversation levels! We’re talking less than 1/10 of a Watt, and the amp still retains its tone and dynamics! Anyway, here’s the clip:

Read Full Post »

Gear Review: VOX AC4TV

Posted in amplifiers, amps, Amps/Amplification, GAS, gear, gear reviews, guitar, guitar gear, guitar gear reviews, guitar reviews, guitarists, Guitars, Music, musicians, new gear, vox, tagged , , , , , , , , , , , , , , on October 26, 2009| 6 Comments »

4.75 Tone Bones - Almost perfect but not quitevoxac4tv VOX AC4TV Amplifier

 

Summary: For what it brings to the table, this is a great little amp. While it’s mainly touted as a practice amp, you can easily gig with this at small venues, or attach an external cab to it, and you could easily keep up with a drummer!

Pros: Classic VOX ACx cleans, and nice, warm overdrive via the Class A EL4 power section.

Cons: 1/4 Watt setting really narrows the bandwidth. The amp sounds pretty lifeless at this level, but that’s why I have a great attenuator. I would play this at 4 Watts all the time. No need to ever use the built-in attenuator.

Features:

  • Controls: Tone, Volume, OP Level (4W, 1W, ¼ W)
  • In/Out Jacks: Input, External Speaker Jack (¼’)
  • Output: 4 Watt RMS 16-Ohm
  • Speakers: AC4TV – 1 x 10″ 16-Ohm Celestion VX10 custom speaker;
  • Valve/Tube Complement: 1 x 12AX7 (pre) / 1 x EL84 (power)
  • AC4TV Dimensions: 13.78″ (W) x 8.46″ (D) x 14.76″ (H);
  • AC4TV Weight: 19.84 lbs.;
  • Power cable included

Price: ~$249 street

Tone Bone Score: 4.75 – I was very surprised by this little amp. The 10″ Celestion speaker really packs a nice punch, and the controls are dead simple. I would easily add this to my growing stable of amps!

I’ve been on this low wattage amp craze for awhile, and it’s wonderful to see all these great low wattage amps entering the market! Orange has the Tiny Terror, and VOX also has the Night Train. Those amps just mentioned are all pretty much modern styling, but I should qualify my craze. I love the old vintage styled low wattage amps.

It all started out with the Fender Champ 600, which I reviewed awhile ago here. I was looking for a low wattage tube amp that I could get some serious overdrive tone from without making my ears bleed. I immediately fell in love with that amp, and since I’ve had it have only made some minor changes, like putting in NOS tubes. But other than that, this amp has served me quite well, both in the studio and even in small venue gigs (using a 1 X 12 of course).

So it was a very nice surprise to encounter the VOX AC4TV in a store yesterday. This is a sweet looking little amp, with the classic TV type of box harkening back to yesteryear. The blonde vinyl is a very nice touch!

How it sounds…

The AC4TV is little tone monster. This single-ended amp packs quite a punch, despite its diminutive size and 10″ speaker. Surprisingly great tones are to be had with this amp, from your classic VOX EL84 cleans to some very nice crunch and grind when you push it. As a single-ended amp, it’s simple as expected, just a volume and tone knob, plus a selector switch for choosing 4, 1 and 1/4 watt output.

At 4 Watts, the amp puts out a great clean tone. With a Strat it starts mildly breaking up at about noon on the volume knob, and at about 10 o’clock with a humbucker – for that, I used a gorgeous sunburst finish Gibby ES-335 – damn I wish I hadn’t sold mine! Cleans with the ES-335 were incredibly lush as expected from that semi-hollowbody, yet they were also very chimey due to the natural character of the EL84 power tubes. It was a very good combination!

Going into grind, you get that classic EL84 crunch, but it’s obvious VOX must’ve installed a filter cap to prevent the power tubes from over-saturating and creating a compressed, squishy mush. The overdrive remains nice and open, with great dynamics and touch sensitivity.

At 1 Watt, the amp still retains a very nice tone, though the tone bandwidth is slightly narrowed. It’s not bad at all, and at this power setting you can crank the amp up (but keep in mind that sonically, 1 Watt is still pretty loud), but the volume will be fairly reasonable.

The 1/4 Watt setting was not really pleasing at all, though in a pinch, if you really have to be quiet, it’ll do as a reference point for practicing. At this setting, the tone gets muddy and the dynamics are abysmal. Were I to get one of these, I’d get the head and cabinet version so I could use a proper attenuator with this, and keep the amp in its 4 Watt mode to get all the gorgeous tones that the full power setting has to offer.

I any case folks, this is classic VOX tone. The EL84 are bright and chimey as expected, and when pushed, the amp doesn’t produce over-the-top overdrive. It’s nicely controlled and surprisingly smooth.

Overall Impressions

The rating says it all. I love the tones that this amp produces, and I love that classic blonde look. At a street price of $249, it’s a very nicely priced amp to boot! You can use this for practice or, with an external cab, there’s no reason it will not fit right in at a small venue gig. The custom power transformer has a lot to do with the power handling here, and it helps the amp produce a big voice for such a small package. Definitely a thumbs up for the VOX AC4TV!

Here’s a great demo video of the AC4TV from VOX:

Read Full Post »

Revisiting the Aracom VRX18

Posted in amplifiers, amps, aracom amps, EL84, gear reviews, guitar, guitar gear, guitarists, Guitars, Music, musicians, PRX150-Pro, tagged , , , , , , , , , , , , , , , on October 24, 2009| Leave a Comment »

Aracom Amps VRX18 18 Watt Head

This morning, the guy who’s painting my house came into my garage/studio to ask me a question, and being a guitar player himself said, “Dude… you have a great setup.” So the conversation turned to my favorite topic, and of course, that involves talking about guitar gear. 🙂 During the course of our discussion he talked about how he loves Vox amps, and so I demonstrated my Aracom VRX18, which is actually based upon a classic Marshall 18 Plexi, but it had EL84’s. I wanted to give him a reference tone. He just smiled and said, “That’s yummy.”

He had to get back to work, but after not playing that amp for awhile (probably a couple of months), I forgot how much I love its tone. My VRX18 is quite special in that it’s a custom VRX18 that has a tube rectifier, which is an option when you get one of the VRX series amps. Jeff has it tweaked quite nicely, and the amp has tons of sustain, and gorgeous sag without getting mushy and compressed when driven. That’s probably a reason why I haven’t really used EL84 amps that much. My experience has been that they compress a lot when they’re driven hard.

But not this one… Jeff also adjusted the extra gain channel so it wouldn’t compress the power tubes too much. You get lots of dirt, but you maintain the clarity of your notes. This is a great little amp! In any case, I recorded a clip where I have the Master at 3 o’clock, and the Volume at 2 o’clock. That produces some serious grind, but as you’ll hear in the clip, there’s very little compression.

The drive tone the VRX18 produces is absolutely magnificent! When I recorded the clip, I couldn’t believe all the overtones and subtle harmonics that the amp was producing! Jeff really got the tone nailed with this amp!

In addition to the amp, I played through Goldie, running her straight into the amp, then through the insanely transparent PRX150-Pro attenuator set at variable attenuation mode at about 3 o’clock, then into a custom Aracom 1 X 12. Output volume was just yelling level. 🙂

Here’s a list of the Aracom VRX18’s features as a review:

– Channel 1: Volume and Tone Controls
– Channel 2: Volume and Tone Controls
– Master Volume Control (PPIMV)
– On/Off Switch
– Indicator Lamp
– Hi/Low B+ voltage switch (18/9 watts)
– (2) EL84 Power Tubes
– (2) 12AX7 & (1) 12AT7 Preamp Tubes
– Cathode Biased Power Tubes
– S.S. Rectifier with “sag” circuit
* EZ81 Tube Rectifier – Optional
– Custom Heavy Duty Aluminum Chassis
– Custom “Black” Plexi Front and Back Panels
– ARACOM Power Transformer: hand-wound and interleaved
– ARACOM Output Transformer: hand-wound, interleaved on a paper bobbin
– 4, 8, 16 ohm Speaker Jacks
– Detachable Power Cord (IEC320-C13 Socket)
– External Fuse Holder
– Custom Turret Board (G-10/FR4 Flame Resistant)
– Handwired and Handcrafted in the USA.

This little tone beast is such a value as well! At $895 for the head, it’s an absolute steal, and a real hidden gem in the boutique market, as is the VRX22, which is based on 6V6’s.

For more information, go to the Aracom VRX18 page!

Read Full Post »

Is it GAS when you absolutely need something?

Posted in GAS, gear, gear reviews, guitar, guitar gear, guitar lifestyle, guitarists, Guitars, Music, musicians, new gear, tagged , , , , , , , , , on October 22, 2009| 3 Comments »

Last Friday before I left for work, I went to my garage/studio to fetch my trusty acoustic guitar for my weekly solo acoustic gig, and I couldn’t find it! After a bit of searching, I finally found my guitar – buried under a pile of stuff my wife had taken out of her van! OMG! I unpiled the stuff rather unceremoniously, picked up my gig bag, opened it up, and pulled out my acoustic. Upon initial inspection, nothing seemed amiss. But when I strummed a chord, I could hear a slight buzz issuing from inside the guitar. I shook it to see if something was loose, but nothing rattled inside the body, which led me to believe that the weight of the stuff on the top of my guitar was sufficient enough to loosen up the glue to one of the bracing spans. That’s fixable. I could live with the buzzing if it didn’t show up when I plugged in the guitar. So much for my rationale. The buzzing was even worse when I plugged it in, as the vibrations from the top were transmitted to the under-the-saddle pickup.

Surprisingly enough, I didn’t freak or get pissed off at my wife, partially because the fault was mine for placing it in an area where that could happen. But I had a gig that night, and I had to figure out something – and fast! To make a long story short, I ended up buying what has turned out to be a surprisingly versatile value-priced guitar from Fender, the Stratacoustic Deluxe. I recently wrote a review of this guitar, so I won’t go into details. But after I bought it, the thought occurred to me…

Is it really a case of GAS, when you have an obvious need?

Part of me says that I just acquired more gear, so it’s technically GAS. But the other part of me says that I was replacing a critical component, so it’s not GAS.

In any case, I’m very satisfied, but thought I try to get some feedback. Your thoughts?

Read Full Post »

Gear Review: Fender Stratacoustic Deluxe

Posted in buying gear, fender, gear, gear reviews, guitar gear, guitar reviews, Guitars, Music, musicians, new gear, tagged , , , , , , , , , , , on October 18, 2009| 6 Comments »

4.75 Tone Bones - Almost perfect but not quite

stratacoustic

 Fender Stratacoustic Deluxe

Summary: An extremely pleasant surprise from Fender with both electric and acoustic properties. Shaped like a Strat and a sporting a Strat neck, for any Strat player, it’s immediately familiar!

Pros: Amazing tones. First electric acoustic I’ve played through an amp that didn’t sound like an acoustic guitar plugged into an amp. Very natural acoustic tones, and Strat-like electric tones.

Cons: This guitar was obviously designed to be plugged in. Unplugged, it really doesn’t sound all that good. But that’s okay, because my particular application of this guitar is always plugged in.

Features:

  • Body Style: Stratocaster
  • Top: Spruce
  • Back: Solid Mahogany
  • Sides: Laminated mahogany
  • Neck: Maple
  • Fingerboard: Rosewood
  • No. of frets: 21
  • Scale Length: 25-1/2″ (647.7 mm)
  • Bridge: Rosewood
  • Inlays:
  • Finish: Gloss
  • Electronics: Fishman Classic IV MT (with tuner and blend controls) and Fender Mexico Telecaster pickup
  • Controls: Volume, Bass, Mid, Treble, Blend, Tuner on/off
  • Machine Heads: Vintage Fender style

Price: ~$629 street

Tone Bone Score: 4.75 – Talk about versatility! If the Stratacoustic sounded good unplugged, it would get a 5.0.

Sometimes It Takes an Accident…

As I shared in a previous article, my Ovation Celebrity had a bit of an accident that made me look for a new acoustic in a hurry. What I ended up with was a guitar that simply blew me away! The moment I plugged it in, I was completely sold. I couldn’t believe what I was hearing. It sounded like a miked acoustic! Now granted, I was playing through an acoustic amplifier when I was evaluating the guitar. But nothing would prepare me for the same, natural tone through a regular tube amp! I’ll have a clip in a little bit, but let me tell you, it’s nothing short of amazing. First I’ll talk about the guitar.

Fit and Finish

For Strat players, this guitar will be instantly familiar. The Stratacoustic has a bolt-on maple Strat neck with rosewood fretboard. The body is shaped like a Strat, though of course, with a wider body for the resonance chamber. I’ve got the black model as shown in the picture above. This is a gorgeous guitar! One would think that as it is made in China, the build quality might not be very good. But amazingly enough, this is a really well-made and well-constructed guitar. If I only had one complaint, it would be the 2nd string’s saddle peg, which turned out to be a little loose on my guitar, and required really pressing it in. That could be problematic later on, but I could probably rectify, so it’s just a little nit.

The neck on this guitar is absolutely perfect – at least to me. It’s a classic Strat C-shaped neck in all its maple glory. I love it! And the cool thing is that even though this guitar is technically an acoustic guitar, it takes electric strings, so not only is the neck a Strat neck, with the electric strings, it plays EXACTLY like a Strat, with a nice, low action.

The tuners are totally cool! They’re vintage-style Fender tuners, where you measure and cut the string first, then insert the tip into a hole on the top of the tuner. You bend the string down into the slot then start winding. The result is a nice, smooth finish, with no string stubs that can poke you. They also look cool with their slightly relicked, tarnished chrome finish. It’s a nice retro touch!

Did I mention that this guitar is light? I haven’t weighed the guitar, but it can’t weight much more than seven pounds! I gigged with it twice over the weekend, and it is absolutely comfortable to play! It’s a winner!

How It Sounds

This is the really special part of the guitar. It features a Fishman Classic IV MT acoustic pickup under the saddle and a Fender Mexico Tele single coil at the base of the neck. The Fishman comes with a tuner with individual controls for bass, mids, and treble, and a blend control to blend the Tele and Fishman. In full acoustic, the guitar sounds just like a miked acoustic guitar. With the Tele pickup isolated, the guitar sounds just like a Strat, but with a slightly hollow, acoustic tone. It’s gorgeous! When I play it for acoustic voicing, I’ve actually never gone fully acoustic. In fact, I lean more towards the Tele pickup. The reason is that the Tele pickup adds a nice chime and top-end shimmer to the tone with subtle harmonics and overtones. But don’t take my word for it, here’s a short song that demonstrates what this guitar is capable of:

The song was recorded with three overlayed parts. The base rhythm track is played fingerstyle with the guitar set dead center in the blend, and the tone controls centered as well. The strummed rhythm leans just a bit towards the Tele side, and I bled off a little of the base. The result was that strummed chords sounded like a piano! Very cool! The lead track was recorded with the blend at about 90% Tele, and just a tad bit of the Fishman. For the lead, I also ran it through my wonderful KASHA Overdrive pedal. The result was a gorgeous, dirty Strat tone!

I almost forgot to mention. All the parts were played through my trusty Aracom VRX22! It’s an electric guitar amp, for goodness’ sake! Acoustic amp? We don’t need no stinkin’ acoustic amp.

Overall Impressions

As you can tell, I love this guitar! It is so incredibly versatile, giving me acoustic and electric tones with a touch of a slider. Interestingly enough, I wouldn’t call this a hybrid guitar, though it is technically a hybrid. I’ve played several hybrids, and this guitar really has a voice all its own. It really is an electric acoustic, and for the most part, it sounds like an acoustic. But it’s easy to configure it to sound just like an electric as the song above proves out.

But despite being able to configure it as an electric guitar, the most amazing thing about the Stratacoustic is how natural and organic – acoustic – it sounds when plugged in! Unlike a lot of acoustic guitars I’ve played and heard plugged into an amp, which isn’t at all very pleasing, the Stratacoustic sounds like it’s supposed to; like an acoustic guitar. I have a feeling that the body has a lot to do with this. Yeah, it doesn’t sound all that good unplugged, but it’s evident that the designer had this guitar pegged for being plugged in and was willing to sacrifice its unplugged tone for simply gorgeous plugged in tone.

Before I got it, I had actually never heard of the Stratacoustic. I just saw it on the rack, thought it was cool, and picked it out as one of the guitars I was evaluating. As soon as I plugged it in, I was sold. It’s quite simply a great guitar. It’s funny that the unplugged tone is really uninspiring, and it might turn away lots of players. But once you plug it in, it’s a completely different story. I thought I was done with buying Fender equipment, especially after they upped their prices significantly a few months ago – I just didn’t see the value. But this guitar sells at a great price. I got it for a deal, but at $629, it’s still a great value. I highly recommend this guitar!

Read Full Post »

Gig Report: KASHA Overdrive

Posted in buying gear, effect pedals, Effects, GAS, gear, gear reviews, guitar, guitar effects, guitar gear, guitar pedals, guitarists, Guitars, Music, musicians, overdrive, pedals, tagged , , , , , , , , , , , , , , , , , on October 12, 2009| Leave a Comment »

KASHA KA-ODP-A

OMG!!! Just gigged with my brand-new KASHA Overdrive last night, and I was in tonal heaven! Even though I’d done a pretty good test on it in my original review, there’s nothing like using gear in a live situation. So here are my observations:

  • Incredible Dynamics – The one thing that is readily apparent is how this pedal responds to pick attack and volume knob changes. It is so amp-like, it’s uncanny! I set the pedal up in unity gain with just normal strums on my guitar. But if I dug in a bit more, the pedal responded just like an amp with a bit more punch and volume. Frankly, the volume swell surprised the hell out of me. It’s not huge, mind you, but the response is so amp-like, it really does take you by surprise. I totally dug that while gigging last night!
  • Plays Well With Other Overdrive Pedals – I love stacking overdrives, and the KASHA OD performs beautifully in this role. I set it up as a based OD pedal, then stack it with my Tone Freak Effects Abunai 2. Those two together are an awesome combination!
  • Lots of Tonal Variety – While my favorite channel on this is the Classic channel that adds a chimey mote to your tone, I also played in the Hot channel as well, and the grit and grind was super-sweet. But add to that the dynamic response of the pedal, and what you’ve got is a pedal that has a lot of inherent tonal variety. Last night, I ran it mostly through the clean channel of my amp. But later, I screwed around with it a bit more in my studio, with my amp set at the very edge of breakup. This is where the pedal just warms my heart! With its touch sensitivity, when my amp is set up at the edge of breakup, I can take my tone from gritty and grimy to sweet and chimey with just a touch of dirt simply by modifying my attack or adjusting my volume knob.
  • Open Distortion Characteristics – No matter what channel you use with the KASHA Overdrive, the overdrive never gets compressed. It just gets dirtier. The cool thing about that is that any kind of compression will then come from your power tubes. I’ve rarely liked that compression in pedals, save for my Abunai 2, which compresses in a very pleasing way, but for most overdrive pedals, I don’t want that at all, and thankfully, the KASHA Overdrive remains very open, no matter how hot you go on the channels.
  • Simple Design – Probably one of the best features of this pedal that I appreciate is its straight-forward design. Notice that it doesn’t have an EQ control. It doesn’t need it. It takes your signal, adds a voice to it, and that’s it! Set your EQ on your guitar and/or amp to where you want it, then set the gain knob on the pedal, and just play. What could be more simple?

All in all, I’m pretty much done with my search for an overdrive pedal. I knew it from the first time I played this; and combined with my other OD’s, I can pretty much say – at least for quite awhile – I’m set in the overdrive department!

I’m an overdrive pedal freak, and I can safely say that this is the best overdrive pedal that I have ever played! It’s hard to believe that this little black monster does what it does. I’m totally blown away by it, and I’ve only gigged with it once! I can’t wait to really start using it in all its modes!

For more information, go to the KASHA web site!

Read Full Post »

Gear Review: StageTrix Pedal Risers

Posted in accessories, buying gear, effect pedals, Effects, GAS, gear, gear reviews, guitar, guitar effects, guitar gear, guitar pedals, guitarists, Guitars, Music, musicians, new gear, tagged , , , , , , , , , , , , , , on October 6, 2009| 2 Comments »

5 Tone Bones - Gear has stellar performance, value, and quality. This is definitely top of the class, best of breed, and it's a no-brainer to add this to your gear lineup!stagetrix_riser StageTrix Pedal Risers

Summary: Definitely one of those “why didn’t I think of that” kinds of products. Elevates pedals 1 inch and makes reaching your back row easy. Routing allows you to keep your wires out of the way!

Pros: Very well made, with convenient fuzz to attach your Velcro’d pedals.

Cons: None.

Features:

  • Raises the second row of pedals to the perfect height.
  • Front, back and side openings enable effective cable routing.
  • Premium 18-gauge steel.
  • Attaches to board via heavy duty hook-and-loop fastener on base, which holds firm up to 200°F.
  • Designed to withstand temperatures of up to 200F without melting, so leaving your pedal board in your vehicle on a summer day won’t result in a gooey mess with all the Velcro peeling off.
  • Works with most pedalboards. To be sure, check that you have an extra 1″ of clearance when case is closed. The vast majority do.

Price: $16.99

Tone Bone Score: 5.0 – I dig these things. No, they don’t improve my tone nor technique, but they sure make it easier to tap dance on my pedal board!

This will most likely be a short review because this product doesn’t do much at all – that’s not a bad thing, either… It simply elevates your pedals. But as an accessory, since I’ve installed a set of four on my board, it has proven invaluable to me! In one fell swoop, the StageTrix Pedal Risers made the back row of my board instantly accessible AND cleaned up my cable runs! Where I used to have to run my cables along the sides if my pedals, I now run them underneath the risers because of their built-in routing. My board hasn’t looked this good – EVER!

Admittedly, I was a bit dubious about their ruggedness when I first discovered them. But once I got them, that opinion changed quickly. These risers are heavy and it’s obvious a lot of attention was paid to the details in their construction. They won’t bend, and that’s a testament to their construction. I even stood on one (I’m not a small man), and the pedal riser didn’t budge!

On top of that, the Pedal Risers are set up for immediate and easy use. The entire base is covered with velcro out of the box, and the top is covered with a thin fuzz for attaching your pedals. No assembly required! I hate to attach velcro tape to stuff. It’s a pain in the ass!

Once I got my board set up, I hooked it up to my amp and started tap-dancing. I immediately started smiling because for the first time, I didn’t have to put my foot in an awkward position to engage one of my pedals in my back row for fear of messing up the settings of a pedal on my front line – or heaven forbid, engaging a pedal that I didn’t want to engage. Nothing like doing a clean solo, clicking on my vibe and simultaneously engaging an overdrive. No doubt, it’s a little unsettling. But that won’t happen any longer. The StageTrix Pedal Risers completely eliminate that possibility!

Currently, they’re sold out, so you can’t get them directly from StageTrix Products at the moment. But they should soon make it to retail stores. Check their site often, as they often update it with news!

Read Full Post »

Gear Review: Pointless Picks

Posted in GAS, gear, gear reviews, guitar, guitar gear, guitar picks, guitarists, Guitars, Music, musicians, plectrum, tagged , , , , , , , , , , , on September 27, 2009| 5 Comments »

4 Tone Bones - Excellent gear, that exceeds expectations of its performance, value, and quality. Strongly consider purchasing this.

Pointless Picks

 Pointless Picks

Summary: Really out-of-the-box approach to picks. They’re perfectly round with a raised bevel in the center so you don’t drop ’em.

Pros: Really easy to hold, and strumming with these picks creates a nice ringing tone – not nearly as fat as I thought, but that’s okay! Works great as rhythm guitar pickup or for playing acoustic guitar where a lot of strumming is involved. Great to use as a strummer!

Cons: I found picking out individual notes only okay, and if you’re one of those folks that holds their picks at a 45 degree angle to the string, it’ll take awhile to get used to this pick. It works best straight on, and it’s not that bad. But it’s also kind of big. If it was a smaller diameter, I’d probably love it!

Features:

  • Made from Acetal, which is similar to nylon, but very durable.
  • Raised bevel makes holding onto the pick easy
  • Comes in three thicknesses: .58mm, .72mm, 1mm

Price: < $1.00 ea. through various retailers

Tone Bone Score: 4.0 – These aren’t bad picks, though they do require that you spend a bit of time with them. I actually thought that I’d like the 1mm pick the best, but actually, the thinnest one actually worked best for me.

If you’re a regular visitor to GuitarGear.org, you’ll notice that I rarely review name-brand gear. My thought is that mainstream gear gets lots of coverage, so I tend to gravitate to either the novel or less well-known gear manufacturers. Pointless Picks definitely fall into this latter category!

When I received the envelope from Pointless Picks today, I opened it up in anticipation, and was surprised by them. The pictures you see online really don’t prepare you for the real thing. They’re totally weird looking in a good sort of way. But I’ve learned to keep an open mind, so I took one of each pick (I got several), and went out to my studio to try them out.

I systematically tested each thickness of pick. As a thick pick lover, I thought that my favorite would be the 1mm pick, but the exact opposite was true. The one I liked the most was actually the .58mm pick. I believe this is because of how large a diameter the pick is. When you strum, the pick hits the string with a lot of surface area. With the thicker pick, there naturally isn’t much give, and with my heavy strum technique, the thicker pick didn’t really work well for me. But with the thin pick, it was a different story. I could dig in and the give of the pick made for much easier strumming.

If you’re the type of player who turns their picks around to play with the fat end of the pick, you’ll probably like this pick. Me? I’ll be honest. I like these picks, but I’m not sure I’d like them enough to switch to them exclusively. I even gigged with them this past weekend. As an acoustic pick, I dug them – or at least the thin pick. I was able to get some nice, fat, but also ringing tones from my acoustic. Not sure that I’d use them for electric though. The feel is a bit too heavy for my tastes. You see, I like playing with the pointy end. 🙂

All in all though, these are pretty cool picks.

Read Full Post »

« Newer Posts - Older Posts »