Feeds:
Posts
Comments

Archive for the ‘guitar’ Category


Click on the picture to see an enlarged view.

BOSS RV-5 Digital Reverb

Summary: No, it isn’t the be-all end-all in reverb pedals, but for what it offers as a nice, subtle reverb to add some spaciousness to your sound, then the RV-5 really excels.

Pros: Plate reverb is excellent on this pedal – especially with an acoustic guitar. Amazingly enough, the RV-5 is transparent to my ears and doesn’t suck tone. The RV-5 is also super-quiet, and makes no line noise at all; pleasantly surprising qualities.

Cons: The Spring reverb is a little funky on this pedal. At higher Decay settings, there’s a bit of an intended artifact in the tail of the signal. Not too pleasing to my ears.

Features (from the BOSS web site):

  • Stereo input/output for compatibility with other stereo pedals
  • 6 high-quality reverb modes on par with rackmount processors
  • First-of-its-kind Modulate mode detunes the reverb sound for added spaciousness
  • New spring reverb emulation offers realistic spring reverb sounds
  • New gate reverb taken from high-end Roland studio gear

Price: $149 street

Tone Bone Score: 4.5 ~ As I mentioned above, for what this pedal offers, it’s great! To me, its strong suit is to use it as a subtle effect to add some spaciousness to your sound. As long as you don’t overdo it, this pedal will work great. The Plate reverb is particularly fantastic with acoustic.

With all the great boutique pedals out there, BOSS tends to be a bit too run-of-the-mill for many tone connoisseurs. Even I’ve thought of BOSS as somewhat of an afterthought considering some of the great boutique pedals I have, and from my participation in various online forums. Like, “Oh yeah… BOSS has “xxx” pedal. But it’s BOSS, and that means cheap, production line stuff.” But after I purchased the BOSS RV-5, one of my first thoughts was: “Have I become such a boutique gear snob that I can so easily dismiss production line pedals like BOSS because they’re not hand-made, boutique, and cost far less than boutique stuff that’s SUPPOSED to be better. ‘Cause here I am walking out the store with a BOSS pedal!”

Admittedly, it was a sobering thought. It wasn’t that I was experiencing buyer’s remorse. I truly like this pedal. But I founded this blog to share gear I’ve either purchased or come across, and most importantly, with the premise that it’s tone that matters and not the price or who made it; that is, if it sounds good, who the hell cares who made it or how much it costs? The BOSS RV-5 is a perfect example of this. Yeah, it’s made by a company that is generally equated with “cheap” pedals. But who the hell cares? I like how it sounds. If it wasn’t for the Spring Reverb, which I don’t particularly like on this pedal, it would’ve gotten a higher rating.

My intent with getting yet another reverb pedal was to get a journeyman pedal that would just do the job for my solo acoustic gigs. I wasn’t looking for a reverb where I’d layer on tons of the effect; just something subtle. After all, I was plugging into a PA board, and just wanted a touch of spaciousness, not have the reverb be the primary tone. In my experience, at low levels, even “cheap” stuff works pretty well, so I took the RV-5 for a spin, and was rewarded with a very nice-sounding reverb. As with any digital reverb that I’ve used, using them judiciously and in moderation is the key, and that was how I did my evaluation in the shop.

The net result is that I purchased the pedal. It does the job of providing a subtle, background reverb VERY well. Someone commented in my Gig Report that they’d take the RV-3 over this. I think this was motivated by the fact that the RV-3 is great for ambient stuff, as it is both reverb AND delay. But the RV-5 is really a different animal. Heavy, ambient reverb is not its strong suit. But for adding a slight spacious texture to your tone, it clearly excels in my opinion.

How It Sounds

For what it provides for me, I think this reverb sounds great. It’s not the be-all, end-all in reverbs, and it’s definitely not something I’d use for ambient stuff, but frankly, I never use a reverb pedal for that anyway, which is why I have a delay pedal. I put together samples of the same chord progression to give you an idea of what it sounds like in its various modes. The pedal is set with Level and Tone at noon, and Decay at 2pm. All clips were played with my Gibson Nighthawk, and running into the reverb pedal and into my Aracom VRX22.

Modulate

This mode adds an ever-so-slight slight chorus modulation to the tone. It’s nice.

Gate

Gate is interesting. Both pre-delay and decay are very short. This is actually kind of cool when you want a reverb tone that doesn’t tail.

Room

This setting really started growing on me when I was doing my tests. This is really a small-room type of reverb.

Hall

Nice, expansive tone with this mode.

Plate

Probably the most subtle of the modes, it really shines with acoustic guitar, but is very useful with electric.

Spring

BOSS claims to have added real spring reverb effects to this mode. Well, it didn’t succeed. The little motes of slightly buzzing spring are absolutely annoying to me, and I would never use this mode. You can hear it a little in the clip. I wasn’t expecting it at all, so it’s out as far as I’m concerned.

Overall Impressions

Sans the Spring mode, I like the reverb this produces. Plate and Room are definitely my favorite modes on this pedal, and Modulate comes in a close third. All in all, if you’re looking for journeyman reverb where you just want to lay on some spacious texture, this is a great pedal to consider!

Read Full Post »

Click on the picture to see an enlarged view.

VOX Time Machine Delay Pedal


Summary: If you’re looking for a super-quiet, dynamic and versatile delay that will cover a lot of territory, look no further. The Time Machine rocks!

Pros: Absolutely quiet, with no line noise at all. It is so easy to dial in great delay sounds with the Time Machine, it’s almost scary. I like the fact that it has more features than a basic delay pedal, but not so many that you spend all your time tweaking. Oh yeah… It sounds absolutely fantastic!

Cons:None.

Features:

  • Controls:  Level, Delay Range, Time, Feedback, ON SW, Tap & Modern/Vintage SW, Hi-Fi/Lo-Fi SW
  • In/Outputs: 1 x  INPUT, 1 x OUTPUT, 1 x DRY OUT, 1 x DC9V
  • Max Delay Time: 5800 milliseconds via Tap-Tempo, 1000 milliseconds via Delay control
  • Input Impedance: 1M-ohms
  • Output Impedance : 1k-ohms
  • Power Supply:  9V alkaline battery(6LF22/6LR61) or AC adapter(sold separately)
  • Current Consumption: 60mA
  • Dimensions: 143(W) x 121(D) x 58(H) mm / 5.63”(W) x 4.76”(D) x 2.28”(H)
  • Weight: 600g /1.32 lbs (without batteries)
  • Included Items: 9V alkaline battery (included)
  • Options: 9V AC adapter (not included)

Price: $199 street

Tone Bone Score: 5.0 ~ This pedal has ended my search for a delay. It really is as good as it’s advertised.

I tend to be a little wary of “signature” pedals because I’m really not one who wants to sound like someone else; besides, I’m not nearly as capable on the guitar as said artists. But now and then, I come across signature gear that forces me to take a good, long look: Not just because of the name behind it, but simply because it’s just a great piece of gear! Such was the case with the VOX Time Machine. When it first came to market, I have to admit that I was excited because I know that Joe Satriani is a real tone freak, and I figured that any kind of gear in which he has design input is bound to be pretty good. But the flip side of that is that I’ve had experience with other signature pedals that were really geared towards the artist and their playing style specifically, and frankly, that stuff has left me frowning. Not so with the Time Machine, which took me completely by surprise!

I’ve been in the market for a delay for almost a couple of years, when I gave away my crappy Boss DD-5 that had such perfect and precise delay that it just felt processed. It was nothing like my former DD-3 that actually sounded pretty good, but I lost that pedal after playing in an orchestra for a musical theatre gig (I didn’t have a board at the time, and only carried a couple of pedals). Needless to say, during that time, I’ve evaluated several delays, but none have really caught my fancy. They were either too dark sounding, as in the case of most analog delays, or they sucked tone, as in the case of many digital delays I’ve tried. My surprise with the Time Machine is that in either mode, modern or vintage, my basic tone was retained! But I’m getting a bit ahead of myself.

In my search, I came up with some criteria that had to be fufilled 100% before I’d even consider buying one. Here they are:

  • First, I wanted Tap Tempo. I’ve always hated having to bend over to tweak knobs; but moreover, I wanted to be able to match tempos with my drummer on the fly.
  • Secondly – and I know this is purely subjective – I wanted a good balance between tweakable settings and ease-of use. In other words, I wanted to have the flexibility to dial in a number of delay settings but not have so many that I’d be spending all my time tweaking knobs.
  • Thirdly, I didn’t want to ever have to refer to a reference manual to make sure I was using the pedal correctly. The “don’t make me think” rule had to apply. I should be able to dial in great tones in a matter of a few minutes, if not earlier.
  • Finally, and most importantly, the pedal could not suck tone, and had to be reasonably transparent. In most cases, I don’t mind a pedal putting an emphasis on a particular EQ range (like my Kasha overdrive does), but it should never remove a range or “feel” like it narrows the bandwidth of the signal.

There are lots of delay pedals I’ve evaluated that were particularly good in most areas, but none until I played the Time Machine ever fulfilled all four criteria. That’s how great this pedal is!

It’s Mean When It’s Green

I love the shiny, green apple finish of the Time Machine. Of course, the paint job doesn’t make the pedal. But the Time Machine is built like a tank, and is certainly gig-worthy. I imagine that JS had that in mind when providing his design input. The chicken head knobs give the pedal a cool vintage vibe, but not only that make it very easy to see where you’re at with your settings. The stomp switches are nice and smooth, and the pedal engages without producing any noise.

How I Did My Evaluation

I didn’t just test the Time Machine in isolation. I’ve learned that one of the best ways to evaluate pedals is to do A/B tests against other pedals of like kind to make a comparison. So I compared the Time Machine against a Way Huge Aqua Puss and a TC Electronic Nova Repeater at my favorite shop, Gelb Music in Redwood City, CA. My thought was to compare it against an analog and another digital delay. Sorry, but no clips because I was in a shop.

All my tests in the shop were done with a Fender Custom Shop Tele, plugged into the pedals (hooked together so I could quickly make a comparison without swapping), and into an absolutely superb-sounding and -looking Dr. Z Maz 38 with draped in blonde tolex. Mm mm good. 🙂 I chose a midrange wattage amp because I wasn’t interested in creating grind. I’ve never been one to use delay with overdrive – maybe a little. But in this case, I wanted to have an ample amount of clean headroom to work with, and the Maz 38 worked perfectly for that (for the record I REALLY want a Dr. Z Remedy).

Aqua Puss and Nova Repeater

I will most likely have reviews on the Way Huge Aqua Puss and TC Electronic Nova Repeater in the near future, but I’ll give you a quick run-down of the pedals. If you’re looking for a dark, swampy, blues delay. The Aqua Puss delivers that in spades. It has this certain ethereal quality that made me think of drifting on a boat in the middle of the Everglades. I actually really liked the pedal, but I was after something else entirely with my delay search – much more versatility – and the Aqua Puss was a one-trick pony. It does what it does exceptionally well, but don’t ask for much in terms of usability in a variety of styles.

I was very sadly disappointed with the Nova Repeater. It packs a TON of features in its box, but for me, I was a little concerned that were just too many features. But despite that, it was easy to get a usable delay tone almost right away. The folks at TC Group certainly know how to pack in features, but they make them readily accessible, and very easy to understand. I actually had my heart set on getting this pedal after reading many reviews and listening to clips and watching video; and I almost purchased it a couple weeks ago. But I’m glad I compared it head-to-head with the Time Machine.

The Time Machine may not have all the features as the Nova Repeater, but out of the box, it wins hands-down in the tone department. The Nova Repeater sounded bland and dry – processed – when played in an A/B test between it and the Time Machine. And I detected a distinct loss in both highs and lows; in other words, bandwidth narrowing. That was not at all pleasing. That said though, the Repeater is still a great pedal, and apparently there’s an internal pot to calibrate the tone to your rig, so that’s a plus. But frankly, I’m not one to tweak that deeply. I probably would’ve still bought it if I didn’t do the A/B test. The tone is usable and really not as bad as I may have painted it, but it’s not as good as the Time Machine’s tone in my opinion.

Playability

If it’s any area where the Time Machine simply shined above the other pedals was how absolutely responsive it was to picking dynamics. Play lightly, and the delay is super-subtle; you almost feel as if it’s not there. Dig in a bit, and the pedal responds. I did a few lead lines to experiment with this, and was totally blown away. I set the Level control so I’d really have to dig in to get the delay effect, but for most runs, picked or legato, what I got was a more ambient effect – almost like reverb. Wow! That kind of pick response is probably what sold me the most.

In addition to dynamics, I just loved how easy it was to dial in various settings. The knobs are very nicely NOT over-sensitive, so moving a knob doesn’t result in dramatic changes in the effect. The net result is that you can get into a general area on the sweep of a particular knob, and make a couple of slight changes to zero in. How many pedals have we played where just turning a knob ever-so-slightly drastically changed the effect? It’s probably why I’ve liked my Boss CE-5 chorus for so long, and even though I’m currently bidding on a CE-2 on EBay, if I don’t win the auction, all won’t be lost because the CE-5 has a nice, consistent sweep on its knobs.

How It Sounds

Like I mentioned, the Time Machine is simply transparent. The Modern mode is truly transparent – at least to my ears – while the Vintage mode darkens the tone ever so slightly and adds some subtle modulation (it’s chorus-like) like you’d expect with an analog delay. But unlike many analog delays that I’ve played, the darkening with the Time Machine does more of a lower-mids EQ emphasis, whereas I’ve felt that analog delays cut highs. The Aqua Puss certainly felt like it was cutting highs, though it definitely compensated for it with some overall great tone. Back to the Time Machine, the net result is that in vintage mode, the tone becomes slightly more rich and lush.

I liked both modes equally well, though I’d probably tend to use the Vintage mode when playing absolutely clean, as it also adds a tiny bit of hair to the signal. It’s almost imperceptible, but it’s there. I loved doing some simple chord comps up on the neck in Vintage mode.

Modern mode, on the other hand, is like the Swiss Army Knife of the Time Machine, making it capable of fitting into any style of playing, from syncopated rhythms ala The Edge, to heavy chunk where you want to have a bit of slap-back.

The Time Machine also has a toggle switch for Lo-Fi and Hi-Fi modes, in addition to the Modern and Vintage modes. Hi-Fi apparently maintains tonal transparency, whereas Lo-Fi includes High- and Lo-cut filters. The difference between the two fidelity modes was subtle at best. I didn’t detect much of a cut in either highs or lows when engaging Lo-Fi; the EQ changes ever so slightly, but the bandwidth didn’t change at all. Again, I feel like it’s more of an EQ emphasis rather than a removal of portions.

Overall Impressions

I’m glad I took so much time to find a new delay pedal. As you can tell from my review, I love the Time Machine. It fulfilled all my criteria for what I wanted in a delay pedal. To me, it has enough adjustable settings to keep any tweaker happy, but it’s also super-easy to quickly dial in the right amount of effect. But not only that, it just sounds damn good!

Read Full Post »

Man! Haven’t written a full song with vocals in awhile. Life happens, and it’s not the easiest thing to get the time to write. So the other day, I came up with a funky groove. It started out as a simple blues in Em, bouncing back and forth between Em7 and Bm7. I knew I didn’t want to just stick to a 1-4-5 kind of pattern, so I added some altered chords to kind of “jazz” it up a bit. The title has nothing to do with the music. 🙂 It’s the subject matter of the lyrics, which is divorce. Don’t know how I got on that line of thinking; maybe it was from people around me who have gone through it. Anyway here’s the song:

Equipment Used:

Rhythm (left and right sides): Squier Classic Vibe Tele (50’s)

Lead: Gibson Limited Run Nighthawk 2009

Amp: Aracom PLX18 BB w/Trem

Notes:

  • I originally laid down the rhythm with Pearl, my MIM Strat. But those Tex Mex pickups were just too bright for an already bright vintage Plexi-style amp. Way too much high-end attack. So, I switched to Blondie. That Tele is just so damn versatile!
  • I just love that vintage Marshall tone. Funny thing, I was never into Marshalls until recently, but since I’ve been playing Aracom amps, that’s the tone I just love!
  • The Nighthawk is just awe-inspiring! The tones that guitar can produce are simply phenomenal. The mix between the P-90 and the Burstbucker is to die for! I love that guitar!

Read Full Post »

How gear performs in the studio is one thing, how it performs in a public venue is an entirely different matter. Unless it’s just not practical, I almost always take gear I’m testing to a gig because to me at least, that’s the best test of gear as gigs are so unpredictable – you never know what might happen, and good gear will almost always be adaptable to the changing environment of a gig.

So how did the Nighthawk perform? In a word, spectacular!

In my recent review of the Nighthawk, the word that came to mind for me to describe the guitar was “comfortable,” and that was completely evident when I played it at my church gig this evening. The Nighthawk is comfortable in every way imaginable; from its light weight to its playability, and its ability to fit into any genre of music.

Now before you poo-poo that a church gig is not a “real” gig, guess again. I’ve played in a variety of venues over they years, and playing at church is one of the most challenging venues to play.

The reason for this is that the music at a church service isn’t the same style from song to song. Since I do kind of a “rock” service, we usually start and end with rockin’ songs with copious amounts of overdrive. But in the middle or meat of the service, we have to back it off a bit. Sometimes it’s bluesy, softer, classic rock with a bit of overdrive, but a lot of the songs are much softer: ballads and slower tunes that require playing clean. So versatility is absolutely crucial with the gear that I use for the service, and the Nighthawk delivers the versatility I require in spades.

For this particular service, I kept my rig very simple. For my amp, I used my trusty Aracom VRX22 hooked up to my Aracom PRX150-Pro attenuator, then out to my custom Aracom 1 X 12 cab with a Jensen P12N. In front of the amp, I used just one pedal: my Boss TU-2. 🙂 I normally bring my entire board that has a variety of drives and modulation effects, but this time I wanted to capture the raw tone of the guitar, and all I could say after the service was, “WOW!”

The Nighthawk can produce some very nice grind with the P-90 and Burstbucker 3, but it can also produce rich and pristine cleans; cleans that’ll just make you close your eyes and soak up all the tonal goodness. The P-90 produces lush, fat cleans, while the BB 3 – as expected – produces bright cleans. But engaging the middle selector position allows you mix the two in varying quantities and this lets you dial in all sorts of clean tones, from super fat to ringing. The thin body of the Nighthawk is exceptionally resonant, providing great sustain and tonal complexity, producing an almost reverb-like effect. I was absolutely floored by the gorgeous clean tones I was able to dial in. It was purely inspiring!

For more overdriven tones, the middle pickup again makes this guitar so versatile. In fact, I played most of the service in this position, and simply varied the amount of neck and bridge pickup volumes to get the overdrive tones I wanted. For our more rockin’ tunes, I switched the amp to the drive channel. On the Nighthawk, I dimed the treble pickup, and when I wanted more heavy crunch, would just dial in more P-90. It was so cool! Dialing in more P-90 didn’t result in significantly more volume; a slight amount, but nothing significant. When I got to a lead break, it was a simple flick of the toggle to the treble pickup, and I could get that classic Les Paul treble pickup tone! F$%kin-A!

Interestingly enough, the Nighthawk isn’t a bright guitar. In fact, its tone is the deepest of any guitar I’ve gigged with, save my old ES-333, which was both darker and boomy. But that darker tone isn’t a bad thing at all because the Nighthawk has BIG HAIRY BALLS. There is nothing subtle about its tone. It’s incredibly expressive and in your face, whether you’re playing clean or dirty, and it forces you to engage in a never-ending musical conversation while you play it. You can’t be timid with this guitar. It won’t let you. There were times when I was playing where I would normally hold back, but with the Nighthawk in my hands, it seemed to coax me to go outside my comfort zone and do things I wouldn’t normally do. Damn! If I were single and the Nighthawk was a woman… no, I better not go there. 🙂

As you can tell, I quite simply dig this guitar. I know, I say that about a lot of gear, and it’s genuine. But there’s gear that I dig and there’s gear that I REALLY DIG, like Blondie, my Squier CV Tele, and all my Aracom equipment. The Nighthawk definitely falls into that REALLY DIG camp!

By the way, not that it really matters a lot to me because I didn’t even think about what number guitar I got in the limited run of 350, but to my very pleasant surprise, I discovered that I have #29 in the lot. Like I said, I didn’t even think to check this, but a member on the My Les Paul forum asked me what number I got – it was first time I looked. Not sure if this really means anything because I’m not really a collector – I’ll never sell this guitar. But it’s still kind of cool to get a low number.

There’s a certain magic about the Nighthawk that harkens me back to the first Harry Potter movie when he went to the wand shop. The shopkeeper told Harry (paraphrasing), “The wizard doesn’t choose the wand. The wand chooses the wizard.” And in the case of this guitar, despite the fact that I was going to pull the trigger on an R9 Les Paul, this guitar reached out and chose me. I have absolutely no regrets about passing over the LP in this case, and I’m looking forward to the magic the Nighthawk and I can create!

Read Full Post »

Click on the picture to see an enlarged view.

Gibson Limited Run Nighthawk 2009


Summary: After a 10 year hiatus, Gibson returns the Nighthawk to market, with a slightly different look and electronics. Make no bones about it; this guitar is SWEET!

Pros:Looking for a super-light but versatile guitar? Look no further. The Nighthawk has it all, and can do it all from swampy blues to all out RAWK! Its thinline body makes it absolutely comfortable to play, and the neck is perfect!

Cons:None.

Features:

  • Style: Contoured single-cutaway
  • Top: AAA Maple
  • Body: Bound mahogany
  • Neck: Set mahogany
  • Scale length: 24-3/4″
  • Neck profile: ’60s thin
  • Fingerboard: Rosewood
  • Fingerboard radius: 12″
  • No. of frets: 22
  • Nut width: 1.69″
  • Neck pickup: P-90 single-coil
  • Bridge pickup: BurstBucker 3 humbucker
  • Controls: Volume, Volume, Tone, 3-way toggle pickup selector
  • Hardware: Chrome
  • Tuners: Kluson
  • Bridge: Tune-O-Matic
  • Tailpiece: Stopbar
  • Finish: Lacquer
  • Case: Hardshell
  • Other: Certificate of Authenticity.

Price: $1400-$1700 street

Tone Bone Score: 5.0 ~ Talk about love at first strum! The Nighthawk is like a cross between an SG and a Les Paul, and I can’t say enough about how great this guitar plays and sounds!

When I have enough time to go to my favorite shop near work, like any gear freak, I’m like a kid in a candy store; especially this little place in Redwood City, CA called Gelb Music. I’ve known the guys there for a number of years, and they’ve always steered me in the right direction. Unfortunately for me, they also know that I have a HUGE weak spot for non-mainstream gear. Such was the case when I walked into the shop today to ogle some Les Pauls. They’ve known that I’ve been jonesing for one for awhile, but they must have a sense about what appeals to me, because one of ’em will say, “Dude, those Pauls are nice, but you gotta check out this…” And in “checking it out,” I’ve since ended up with a MIM Strat, a Roland Cube 60, a Squire Classic Vibe Tele, an Ibanez GSR200 Bass and numerous pedals.

So here I was, minding my own business, admiring the Les Pauls hanging from the ceiling, when Tommy did the “dude you gotta check this out,” I told him, “Tommy, don’t do this to me. You know what happens when you do that.”

“I know, man,” he replied, “And I know you’ve been looking at the Pauls, but you gotta check this out [pulling down this gorgeous honey-colored Gibby from the hanger]. It’s the most playable f-in guitar in the shop, and dude! The tone this thing produces is incredible. Here. Check out the neck!” Handing me the guitar in the process.

I was immediately overtaken by the light weight of the guitar. If that axe weighed 6 lbs, I’d be surprised (a look at the Gibson Nighthawk site lists the average weight at 4.6 lbs). Then as I moved the guitar into a playing position, I noticed how absolutely perfect the neck is. I love that 60’s thin neck! It’s a shallow “C” with a slightly wider profile. It’s faster than all get-out, and oh so comfortable to play! But I’m getting a bit ahead of myself…

Fit and Finish

This is one beautiful guitar! The bookmatched figured maple top is absolutely stunning, and the transparent amber lacquer brings out the three-dimensionality of the wood grain. The high gloss of the lacquer further enhances the effect – it’s like liquid sunshine. To provide definition both body and neck are bound with a white binding.

Speaking of wood, the light mahogany is flawless and all the joints and seams are perfect.

The Nighthawk 2009 is quite a bit different from the original that came out in 1993, even though it retains the same body shape. The original seemed to be Gibson’s answer to the HSS Strat, and had a 5-way pickup selector. With this version, Gibson has gone with a BFG setup with a P-90 in the neck and an awesome BurstBucker 3 in the bridge. The pickup selector switch is now a 3-way toggle and has been moved to the upper bout like a Les Paul (which I love). The neck sports a solid mahogany base with a rosewood fretboard and medium-jumbo frets with a scale length of 24 3/4 inches – just like a Les Paul.

The hardware provides an added touch of vintage feel to the look of the guitar, from the Kluson tuners and chrome Tune-o-matic bridge and stop tail piece, to the gold top hat volume and tone knobs. Even though the Nighthawk 2009 is a limited run guitar, it’s clear that Gibson didn’t just want this to be novelty guitar where they could get away with using cheap materials. Everything about this guitar screams high-quality down to the little details. I’m impressed!

In fact, at a distance, you might easily mistake this guitar for a different Les Paul model. I certainly did when I saw Billy Joel in concert. His guitarist was slinging this gorgeous Gibson that looked like a Les Paul. But it kind of confused me with its body shape and three knob setup. I kept on wondering, “Did Gibson create a new model Les Paul?” I’ve since been corrected.

Playability

There’s one word that comes to mind when I play this guitar: Comfortable. My favorite guitars have always been those that sound, play, and feel comfortable, and the Nighthawk is all about comfort. The 60’s thinline neck with wide profile is so easy to play. I found myself not worrying at all about where my fingers were and just playing. The action is low and fretting notes is so easy. But with the medium-jumbo frets, wiggling your fingers creates some very nice vibrato without even bending the strings! The pickups are in the perfect place for where I strum, which is right between them, so no chance of banging my finger on a pickup in a hard strum as well.

To me, this is a player’s guitar. I know that some people have complained that it doesn’t faithfully reproduce the original. But I believe that the original was just too quirky and didn’t really have player ergonomics in mind. For instance, the pickup selector switch. I dig that it’s in the classic Gibson position. It is so much more accessible – I don’t even have to look to switch pickups.

The Les Paul scale length on the Nighthawk makes bending – even the slightly brittle shop strings which I will replace today – a breeze. The setup is perfect and there’s nary a string that frets out or dulls. Like I said, this is a player’s guitar.

How It Sounds

Gibson states, “Today’s version is still all about a guitarist keeping his options open. With two volume controls, a master tone knob and two heavy-duty pickups, guitarists can experiment with endless sounds.” In other words, the Nighthawk is all about tonal diversity, capable of producing super-smooth and sexy cleans to all out snarling dog drive. I’ve played the guitar a little less than a couple of hours, and I’m absolutely blown away by the tones this guitar produces.

The big surprise is the P-90 in the neck. I was expecting it to be bright, but it’s thick and ballsy, with a real emphasis on the lower mids. It might get lost in the mix when played dirty, but the cleans is where this pickup really stands out. The voicing is creamy smooth, and very acoustic sounding.

The treble pickup is classic Les Paul, but just a tad darker which I absolutely love! The Burstbucker 3 produces a rich tone that’s full of harmonics and overtones, without being overly bright.

But the real magic comes in mixing the two pickups in the middle position. Holy crap!!! Talk about tonal complexity! The guys at the shop said that the middle position was their favorite, and I now see why. I immediately fell in love using this setting.

As far as volume balance is concerned, both pickups put out about the same volume, so there’s not this big gain boost when you switch to the treble pickup like you’d get from a Les Paul. I’m thinking Gibson did this to emphasize using the middle position, and blending the pickups together. Nice.

In any case, I got ambitious and put some sound clips together:

Neck Pickup

Clean

Dirty Lead

Rock Rhythm

Both Pickups

Clean

Dirty Lead

Rock Rhythm

Treble Pickup

Clean

Dirty Lead

Rock Rhythm

All clips were played with the Nighthawk (with both volume knobs set at about 7 and tone at 10) plugged straight into my Aracom VRX22 which then ran into my Aracom PRX150-Pro attenuator then out to a 1 X 12 cab with a Jensen P12N. I used a Sennheiser e609 instrument mic, and recorded directly into GarageBand with no volume leveling.

Overall Impressions

I’m still getting acquainted with this axe, but with all the tones that it can produce, I can easily see it becoming my go-to axe, and it isn’t just initial infatuation speaking. This guitar – at least to me – is so sexy from its looks to its sounds! If you get a chance to play one, you’ll see what I mean.

As a limited run, there are not many out there. In fact, some online stores no longer carry them. But you can still find some at online retailers, and if you’re lucky, your local shop will have one. Give it a try!

For more information, please check out the Nighthawk site!

Read Full Post »

As you may know, I own a Prestige Guitars axe – actually one they no longer have in their current model lineup (though they list it in their models area) – the Heritage Elite, which I call “Sugar” because she actually smells sweet in addition to sounding sweet. The Heritage Elite is a very ornate take on a Les Paul copy; a lot of people actually don’t like how busy all the decorations are, which might account for why it’s not on their current model lineup. But the tone and sustain are wonderful, so that guitar is a keeper for sure. But I suppose in an effort to be a bit more “true to form,” Prestige has come out with a new axe, called the “Classic,” that I am sure will turn heads.

The Classic is a very nice take on a classic Les Paul design. It features a AAA flame maple top, on a super-light, carved, mahogany body and mahogany neck with a rosewood fretboard. As with the Heritage, it sports the classic Seymour Duncan 59/JB Neck/Bridge pickup combination, independent volume and tone knobs, and a 3-way selector switch. Not sure what the bridge is, but when I last spoke with Prestige, they were moving away from Gotoh Tone-o-matic to GraphTech. Sure looks like a Gotoh to me, but I’d have to see it up close to tell.

When I look at the picture, if it weren’t for the lower horn, I’d swear this was a Les Paul! I dig the mother of pearl inlays on the fretboard, and the graceful lines of the body; speaking of which, the back is contoured, so in addition to being light, it is apparently incredibly comfortable as well. Great combination!

Here are specs from the Prestige Site:

  • 24 3/4” scale length
  • 1 11/16” nut width
  • Carved mahogany, maple bound body
  • AAA Grade flame maple top
  • Mahogany neck
  • Bound rosewood fingerboard
  • Mother of pearl trapeze fingerboard inlay
  • Mother of pearl prestige logo & decal
  • Seymour Duncan SH1-59 (neck) SH4-JB (bridge) humbucker pickups
  • 2 Vol. / 2 Tone / 3-way toggle controls
  • Grover tuners
  • Tune-o-matic bridge & Stop Bar
  • All chrome hardware
  • Available in natural sunburst finish

And to top it of, here’s a Guitar World video demo of the Classic:

Even with the low quality video, you can hear how that guitar just sings. It has a sweet sound, but can also get really aggressive. That’s one of the reasons I love playing my Sugar, which is a great guitar. But I might just have to get me one of these classics to gig with… OMG! More GAS!!!!

For more information, check out the Prestige Guitars product page!

Read Full Post »

I know, I know… I talk about this pedal A LOT, and I’ve already reviewed it a few times… (here’s the original) But I keep on discovering so many great things about this pedal that makes me want to talk about it. Just when I think I’ve got it dialed in, I find yet another thing that it does that just completely turns me on!

Tonight, I was screwing around with my song Strutter yet again. I’m done writing it, but I wanted to practice, and that song is really fun to practice to; I just mute the lead tracks and have at it. Mind you, all I wanted to do was practice and play “Blondie,” my Squier CV Tele – I didn’t have anything else in mind.

So I hooked up my Aracom PLX18 BB and started playing over the rhythm track. Folks, this amp just oozes classic Marshall “Bluesbreaker” tone as is, but just for shits and giggles, I decided to switch on my KASHA Overdrive to add a little flavor to my tone because I was working on a new song recently where I loved what this pedal did – especially with the PLX18 BB! For that song (which I’m still writing) I didn’t want to add too much gain. All I wanted to do was add some texture. So I thought it might just sound good while I practiced over Strutter. Man, was that a good call!

Here’s an A/B clip of sorts of the first two verses of the song. In verse 1, I’m playing the PLX18BB with nothing added – just a touch of room reverb as an insert in the mix. In the second verse, I switch on the KASHA overdrive (still with some reverb in the mix). The pedal is in the “Hot” channel, and I set the gain knob at 12 o’clock, which just provides a bit of a gain boost (it’s capable of adding up to 15dB of boost in this channel), but this channel also sustains for days, adding a touch of high-end sparkle. Here’s the clip:

Please excuse the little playing mistakes I made… 🙂 It’s nothing really egregious. In any case, when you compare the two verses, the difference in tone is actually subtle, at least to my ears. But from a playing standpoint, the amount of touch-sensitivity and sustain that was added made the second verse so much more musical and so much more inspiring to play. And speaking of subtlety, I think that is yet another mark of a great overdrive pedal. To me, overdrives should be transparent, they should never alter your tone – that’s what fuzz and distortion are for. At the most, they should simply add EQ emphasis, and that’s it. And that’s why I love the overdrives I play through: Tone Freak Abunai 2, GeekMacDaddy Geek Driver, Creation Audio Labs Holy Fire, the KASHA overdrive, TubeScreamer, and believe it or not, a Bad Monkey. They all bring to the table their own little voicings, but none of these alter your basic tone.

Great gear evokes a sense of inspiration – at least in me – that makes me want to keep playing and playing and playing. I just can’t say enough about this pedal. At around $200, it is worth every penny I paid for it. Thanks, John Kasha for coming up with such a fantastic pedal! Now back to playing!

Read Full Post »

I’m not a metal player, not even a real fan of metal, or I should say the real heavy stuff, and being more of a middle-of-the-road kind of guy in real life, have never really gotten into the fashion. That doesn’t mean it’s bad to me, it’s just not, well, me. So my appreciation of metal and the metal culture and style has always been somewhat on the periphery at best. But I do have to say that some of the styling cues are so over the top, I find them very intriguing.

This morning I received a press release about a new company called Ikon Custom Guitars. The picture of the guitar that accompanied the press release gave me a bit of pause. It was one of those moments where you think, “That has to be about the fugliest goddam guitar I’ve ever seen, but at the same time, it’s cool. By the way, this company is so new that their web site isn’t even complete – it’s just a splash page.

The guitar shown here is called the Arachnoid 1. When you take a close look at it, it really looks like a spider. In fact, the first impression I got was Gene Simmons meets the Lord of the Rings. Here’s an excerpt of the press release copy:

Guitar Strikes Fear in Community

Custom guitar builder, Ikon Customs takes guitar building to a new level with unique custom body shapes and materials…all without sacrificing the tones and performance of the instrument.

Houston TX  February 10, 2010 – Ikon Custom Guitars is introducing its first production models to the guitar market.  The Arachnoid 1is 100% hand built in the USA using traditional and innovative techniques.  After years of effort to challenge conventional appearances and styles of guitars, Ikon Customs feels it has finally reached a new pinnacle in guitar design, appearance and manufacturing.

The body of the Arachnoid 1 is constructed of a poplar wood core for strength and tone and a proprietary resin compound that allows the builders to sculpt and shape finished bodies into new and innovative designs.  The resin compound took many prototypes and years to finalize before committing to final production.  In addition to the proprietary compounds, Ikon Customs also builds bodies using other materials such as fiberglass, carbon fiber and Kevlar.  Founder and President, Marc Anthony H. Bertone feels that with these new materials, his design concepts will be limitless.

The Arachnoid 1 is available in three models:

Arachnoid1 Weaver:

  • Red Oak neck and fretboard
  • Dyed fretboard, printed graphic “tatooed” on
  • Poplar headstock with a walnut veneer
  • Death Dealer high output passive pickup
  • Top loading fixed IKON USA Bridge
  • IKON Grip USA locking tuners
  • Proprietary resin formula over Poplar body
  • Adjustable aluminum nut
  • Custom airbrushed paintjob
  • Available in Flat, Satin or High Gloss finish
  • chrome, black or gold hardware
  • 25.5″ scale, 24 jumbo frets, available in flat or 20″ radius
  • MSRP: $999

Arachnoid1 Recluse:

  • Maple, Walnut, Bloodwood or Purpleheart neck and fretboard
  • Inlaid Aliencult Skull logo
  • Poplar headstock with Carbon Fiber or exotic burl veneer
  • Death Dealer high output pickup or Stealth active pickup
  • Top loading fixed IKON USA Bridge
  • IKON Grip USA locking tuners
  • Proprietary resin formula with  hand-laid fiberglass over Walnut body
  • Adjustable aluminum nut
  • Custom airbrushed paintjob
  • Available in Flat, Satin or High Gloss finish
  • chrome, black or gold hardware
  • 25.5″ scale, 24 jumbo frets, available in flat or 20″ radius
  • MSRP: $1999

Arachnoid1 Widow:

  • Cocobolo or Bocote (or any other exotic wood; subject to availability and may affect final pricing) neck and fretboard
  • Inlaid Aliencult Skull logo, LED glowing fret markers
  • Poplar headstock with Carbon Fiber or exotic burl veneer
  • Death Dealer high output pickup or Stealth active pickup
  • Top loading fixed IKON USA Bridge
  • IKON Grip USA locking tuners
  • Proprietary resin formula with  hand-laid fiberglass and carbon-fiber over Walnut body
  • Adjustable aluminum nut
  • Custom airbrushed paintjob; ours or your choice of colors
  • Available in Flat, Satin or High Gloss finish
  • chrome, black, gold or any painted color hardware
  • 25.5″ scale, 24 jumbo frets, available in flat or 20″ radius
  • MSRP: $2999

About Ikon Customs

Established in 2006 with the intent of changing the world of guitars and musical instruments, Founder and President Marc Anthony H. Bertone set out to find new and unique approaches to designing musical instruments that defied tradition and style.  What started as a hobby in the garage has now turned into a lifetime pursuit and career.  www.ikoncustoms.com

On a final note…

While I’m intrigued by the offering, weird body shapes for guitars aren’t anything new. Halo Guitars was doing that for a long time, though they seem to have gone back to selling more traditional styles – go figure. So I do wish Ikon luck. Hopefully Marc Anthony Bertone will achieve a following.

Read Full Post »

or… Doc Brown in Back to the Future saying, “I finally invented something that works!” Speaking in reference to the Flux Capacitor. Nah, it’s nothing of the sort, but it is by no means less cool. The Flux Density Modulation Speakers are a new approach to attenuation where the attenuation happens right at the speaker! Giving you up to -9 dB attenuation, while keeping your tone, that is what I call cool, and something I must check out! You know me, I’m an attenuator fan, and something like this has me absolutely GAS-ing! From what I could tell from the videos below, the tone is really preserved. Now, mind you that -9 dB of attenuation won’t get you down to conversation levels, but it’ll sure provide enough attenuation to take the bite off the volume. If you need to go lower, hell! Get an Aracom attenuator, and get it down REAL LOW! Check out the NAMM vids!

and from GuitarWorld…

Read Full Post »

I’ve been using the Aracom PLX18 BB Trem in my studio for the past couple of months, and it is simply a great amp. As I’ve written in the past about this amp, I’ve made some modifications to it such as replacing all the stock pre-amps with NOS (the JJ EL84’s are killer in this amp, so no need to even look for NOS for these), and replacing the stock speaker with a Fane Medusa 150.

As most GuitarGear readers know, my go-to gigging amp is my beloved, customized Aracom VRX22. But every now and then, I like to take my other amps out for a spin. For this evening’s church gig, I took the PLX18. Based upon tonight’s experience, it looks like I’m going to gig with this amp a lot more.

One thing that I’ve come to love about Jeff Aragaki’s amp designs, is that he has got the vintage Marshall mojo down. Mind you, he doesn’t make clones. He takes the original circuit designs and innovates on top of them. The PLX18 BB started out as a classic “Bluesbreaker” design, but with improvements to the circuit to make it much more efficient. The result is a real smooth-sounding amp that – like the amp it is modeled after – has tons of clean headroom, and needs to be absolutely cranked to get grind. But when it grinds, it’s so rich and smooth and dynamic, you just close your eyes and let your fingers do the talking!

Such was the case tonight. About a year ago, I re-arranged a classic Catholic hymn and gave it a bluesy, folk-punk vibe (think a cross between Death Cab and Clapton). I know, it sounds like a weird mix, but amazingly enough, it works. People know the song really well, but this arrangement gets them nodding their head in time – it’s cool to see! In any case, I also arranged it so that there was plenty of room in between verses for little solos. It’s a somewhat slow song, so you can’t go overboard, but the phrasing really lends itself to a lead played with an amp just at the edge of breakup, with lots of bends and vibrato.

And it helps to have an amp that has a lot of natural sustain. The PLX is just so damn good at that! I played the amp in the “clean” channel that I had almost cranked up all the way, since that’s where a vintage Marshall sounds great, and of course, it was plugged into my attenuator so I could crank it and still have a manageable volume level. The PLX is so responsive to attack and volume knob adjustments that it makes playing just a dream. Throughout the song, I just closed my eyes and got into pure expression mode. It was one of those occasional experiences where the tone just takes you right into the Zone! When you’re in the Zone, you just can’t do wrong. Hearing the PLX sing with my Squier CV Tele – I just floated away in absolute bliss.

For our closing song, I actually didn’t play, and gave “Blondie” over to my guitar cohort Dave so I could thump out on bass. For that song, I activated the wonderful Kasha overdrive pedal, in the Hot channel to really slam the amp with gain. The great thing about the Kasha overdrive is that it’s a really transparent overdrive pedal, and allows you amp to do it’s magic. With the OD engaged, the PLX took on this incredible character. It’s a bright amp by nature, but the tone became really jangly and ringy, with just a touch of compression coming from the EL84’s. It helps that I replaced the original JJ pre-amps with the NOS ones. In any case, talk about creamy smooth but articulate overdrive! Listening to that just got me thumpin’ out on the bass! We had a lot of fun with that song. Kind of felt like the White Stripes as we only had two instrumentalists (though it was two guitars, or a bass and guitar – no drums). It was raw and edgy, but oh so cool! You gotta just dig moments like this!

As I’ve mentioned, the PLX18 BB Trem is Jeff’s oldest amp design and unfortunately, his least-known amp. It’s tough to compete in the market when there are so many boutique, vintage Marshall-style amps on the market. I’ve played many, but the PLX18 BB is special. Others who own one of these will attest to just how special this amp sounds. Even though it’s not quite as versatile as the VRX22 that can get me over-the-top gain, for what it does, I can’t think of a better amp. Mind you, this ain’t just a one-trick pony. For blues, classic rock, and country, it’s simply killer. So if you’re looking for that classic “Bluesbreaker” tone at a price that won’t break you at the same time (the head is $1345, and the combo – which I have is $1750), I encourage you to check this amp out! And if you do get it, you won’t regret it in the slightest!

As far as equipping it, pay the extra for NOS pre-amps (the JJ EL84’s are just fine – I actually prefer them), and even though Jeff recommends an Eminence Red Fang Alnico to be paired with the PLX18 BB, for my personal tastes, I prefer something with a bit tighter bottom end; hence, the Fane Medusa that I swapped in. If you still want bright tone, then an Eminence Governor works insanely well, and will give you nice mids and high-mids, and I hear the Celestion Gold sounds killer in the the combo! YMMV…

For more information on this wonderful amp, check out the Aracom Amps site!

Read Full Post »

« Newer Posts - Older Posts »