Feeds:
Posts
Comments

Archive for the ‘Saint Guitar Company’ Category

4.75 Tone Bones - Almost perfect but not quite

polarity_j3

Polarity J3

Summary: Made out of one of the hardest woods in nature, the Polarity J3 pick produces a warm, but also “spanky” tone that is perfect for leads.

Pros: I’m a big fan of natural materials for plectrums, and the J3 doesn’t disappoint with its feel in the hand. Natural materials also tend to not squeak when striking a vibrating string. As far as sound is concerned, I dig the sound that this pick produces – A LOT!

Cons: My only concern with this pick is its lifetime. I took the picture I supplied to the left after playing with the pick for about an hour on various guitars, strumming and playing solos. If you click on it, you can see where some of the Carnuba wax has already started wearing away, so I’m not sure just how long the pick will last. However, I’ll have a better idea after I gig with it this coming weekend and will post a follow-up article. NOTE: This is a fairly small nit because I only put a few hours of playing on it, and note that the only wear was the wax coating. The wood itself didn’t have any wear on it.

Price: $29.00 ea

Specs:

  • 1.3 millimeters thick
  • 7/8″ wide X 1″ long
  • Handmade
  • Magnetic

Tone Bone Rating: 4.75 – If I didn’t have the initial concern that this pick might have a short lifetime, I’d give the pick a 5 Tone Bones as it plays and feels and most importantly, sounds great.

As with most gear I write about, how good it feels, plays, and sounds is a matter of personal preference. That also affects what I’d be willing to pay for gear as well. So based upon my initial experience with the Polarity J3 pick, though the pick is on the pricey side, I’d make an investment in it just the same. It plays and feels and sounds fantastic. Is it something I’d use for general use? Probably not, simply because despite the wood being extremely hard, it’s still wood, and will most probably wear at a quicker rate than harder materials. I certainly wouldn’t use it for rhythm playing with a Strat that has vintage-style pickups with the poles that protrude. I nicked several Red Bear picks on my Strats, so I never play a Strat with a Red Bear pick.

But for leads? This is a great pick for that. Here’s a little ditty I put together last night to demonstrate how it sounds (I used my Slash L Katie May through a Fender Twin AmpliTube model):

I already have the perfect application for it. As of late, at my solo gigs, I’ve been making a lot of use of my looper to create live tracks that I can improv over. The “backing tracks” are usually recorded finger-style or using a variation on a clawhammer technique, and most of the time, I just hold my pick in my hand. This is a perfect pick to use for that application, and it’ll get a lot of use; especially this Friday and Saturday. So I’m looking forward to playing with it!

I love a number of things about this pick.

  • Being a rigid pick, it has a relatively fast attack, as compared to standard flexible picks. Even for strumming the quick response helps to stay in time.
  • The pointy tip produces a nice, bright tone, but the wood helps balance that out with some warmth in the mid-range.
  • Amazingly enough, I was expecting to have a bit of friction because of the wood. But it’s so hard that it slides over the strings quite easily, but the awesome thing is that it’s just soft enough so you don’t get that ugly squeak when you’re hitting a vibrating string, as you often get with hard plastic picks.
  • I was a little dubious about its size when I first got it, but after playing with it for just a few minutes, it’s extremely comfortable to hold plus, there’s a lot to be said about holding natural and natural-feeling material.

Will it last?

That’s really the big question, isn’t it? Despite being made of a hardwood, it’s still wood, and wood is somewhat delicate. Only time will tell if it holds up. As I mentioned above, I was a little concerned about the wax coating wearing so quickly after just a little bit of time playing the pick, but the wood was absolutely intact, so my feeling is that as long as I keep the scope of how I use it fairly narrow, this pick should hold up for a long time.

Overall Impression

I’m diggin’ this pick, and will use it this coming weekend at three gigs, so I will get a really good idea about its durability. But as it stands now, I’ve put in a few hours of playing with the pick on acoustic and electric guitars, and even used it with my bass. This is not a pick that I’d use for strumming; not that I’m concerned that it’ll break, but because of its size and shape, it just seems to be made for doing solos.

Read Full Post »

5 Tone Bones - Gear has stellar performance, value, and quality. This is definitely top of the class, best of breed, and it's a no-brainer to add this to your gear lineup!

Wegen "The Fatone"

Click to enlarge

Wegen’s Picks – The Fatone (Fat Tone)

Summary: This is now my new favorite pick! I had misplaced my Wegen GP 250 and wanted to get another GP 250. The store that I bought the last one at was out of GP 250’s so I dug in the Wegen pick box and found this beauty! The grip is awesome!

Pros: Beefy (5mm) pick that is amazingly accurate despite its thickness. Despite its thickness, this is tonally versatile pick!

Cons: Though it doesn’t take anything away from the rating, my only nit about my pick is that it’s black. Black gets lost easily on a dark stage. But Wegen makes them in white, so I’ll probably order a few of the white ones.

Price: $15.00 ea

Specs:

  • 5 millimeters thick
  • Hand-made
  • Perfect bevel that makes your strings really ring!
  • Don’t know the material, but it’s a VERY hard plastic that does not scratch. You will never need to buff or resharpen Wegen picks!

Tone Bone Rating: 5.0 ~ Though I still love my V-Picks Snake (pointed), this pick is now my primary. It’s the perfect pick!

I’ve been searching for the perfect fat pick for a long time; or perhaps I should say that I’ve been looking for a pick that I could use for both acoustic and electric, but I never could. So I used a V-Picks Snake for electric and a Wegen GP 250 and a Red Bear Gypsy Jazz for acoustic. But all that changed when I got the Wegen “The Fatone.”

Admittedly, I discovered this pick not because I was looking to add to my collection of picks, but because I lost my GP 250, which had served me well for the last couple of years. I simply wanted to replace it. Unfortunately – or fortunately – the shop that I bought my GP 250 at was all out of them. So I looked through the case to see if I could find an alternate. That alternate was the Fatone. I knew from the first moment I held it that I was onto something with that pick. Then when I strummed it on a guitar in the shop, I was completely sold! Playing it at my solo acoustic gig an hour after that sealed the deal for me. I’ll be hard-pressed to use another pick.

This is a FAT pick at 5mm. But the inset, thumb-side grip, combined with the beveled tip make this pick feel so much thinner. It’s truly a joy to play.

What is it about fat picks for me? Well, having used them for a few years now, the most significant effect they’ve had on my playing besides tone is how they make my right hand relax. The way that works is that in order to make the pick glide over the strings effectively you have to hold the pick a lot looser in your fingers. That looser grip affects the whole hand. Granted, it took a little while to get used to, but once I was comfortable with a fat pick, going back to my old nylon picks seemed absolutely foreign to me. But relaxation made my playing much more fluid, and I was actually able to play a lot faster because my hand was so relaxed. In any case, I’m hooked on fat picks, and I’ll never go back to conventional picks.

Now I know that I normally do a “How It Sounds” section, but I’m actually on the road right now, writing while my son is driving the car (I’m taking him to college). But also, I don’t know how useful that section would be in this case. All I can say is that the fat pick produces a big sound, but in the case of the Fatone, because of the nice pointy bevel, it produces a nice, bright ring in addition to the deeper tone. It’s a bit hard to describe. It “feels” so much more full than other picks. For instance, though I love the sound my V-Picks Snake makes, it’s definitely a lot more mid-rangy than the Fatone.

One thing that is significant about the Wegen pick material is that it has a texture that feels softer than tortoise, but it’s actually a VERY hard material. The cool thing is that it’s a lot more damp on the strings than either acrylic or tortoise (or natural material). But it doesn’t produce a damper sound. It’s a feel thing. 🙂 In any case, I’m hooked on this pick. Also, tonally, this is a VERY versatile pick. By simply changing the angle and depth of attack, I can get thick, warm tones to nice bright tones. That’s extremely cool!

Overall Impression

As I mentioned above, I now have a new favorite pick. Not sure what else I can say about it. I won’t be getting rid of this one any time soon!

Read Full Post »

Vintage10-2-09 003A few days ago, I announced the new Vintage Series model from Saint Guitar Company. At the time, Adam sent me pictures, but few details, so there wasn’t much to report on. However, I’ve since spoken with Adam, and was able to get some juicy details on this guitar and his vision for the Vintage Series.

  • This first guitar sports a solid mahogany body and neck.
  • The pickups are Seymour Duncan Vintage p-90 Soapbars.
  • Rosewood fretboard with Saint Logo on the 12th fret.
  • Volume and Tone knobs, and a Three-way pickup selector switch.
  • Dark burst finish (natural stain to black)
  • Custom, flush pick guard.

Here’s the best thing about this guitar: It will range in price between $1300 and $2300, significantly less than Adam’s Benchmark and Messenger models which start at $3300 and go up from there. That in no way means lower quality. Said Adam of the price, “I still make the guitars by hand with custom templates and jigs, but the difference is the flat top. Because I don’t have to shape a carved top, the guitar is a lot less labor-intensive to build. Also the dark burst finish is a lot less time-consuming as well. So because I’m saving on time and labor, I want to pass that savings on to my customers.”

Since I already have a Saint Guitar, I know this will be special. I should be getting a test drive of this baby in the next few weeks. I’ll keep you posted!

Read Full Post »

This announcement is so new that Saint Guitar Company hasn’t even put it up on their web site! I first caught wind of this new series a few months ago when Adam mentioned to me in a conversation that he was starting to work on a new style of guitar. This new series was to be a mild departure from the modern rock-inspired designs he has been building for the past several years, and roll time back just a bit to create what he was coining his new “Vintage” series, which would be chambered, have retro styling, and employ P-90 pickups. I don’t have any final build details as of yet, but his first in the series sure looks fantastic. Here are some pictures for your enjoyment!

I can’t wait to do an evaluation on one of these. It’s really exciting! I love the body style on this, with the less pronounced horns, and rounder lower bout, and I dig that flat top! Very cool!

Read Full Post »

goldie41I spoke about Tone with a capital “T” the other day and how your Tone is the combination of your gear plus what’s in your heart. One thing that I didn’t discuss is that when your heart and your gear are in alignment, the visceral effect it has on you borders on a religious experience. Put simply, you become truly inspired. I got Goldie back from Saint Guitars a few days ago to correct some wiring and action issues, and plugging her into my amp, I was immediately floored by her tone. I already was in the first place, but with everything working right, the effect it had on my spirit was tremendous!

So I decided to completely re-write and re-track a song that I had recorded earlier as a demo of the Reason Bambino – turn it into a real composition. But I also wanted to demonstrate the wonderful voice she has. Here’s the song. It’s called “Sunset By the Bay” because it reminded me of sipping a mojito on the beach at sunset:

The opening of the song and the first “verse” demonstrate Goldie’s neck pickup in single-coil configuration. Man, it’s chimey like a Strat! The second part of the song stays in the neck pickup but with both coils working, and adding a bit of crunch in the second channel of my Aracom VRX22. I recently had a mod done to the amp to add channel switching, and remove the Master Volume control from the first channel so it acts more like a Class A amp in channel 1. Continuing on, in the bridge of the song, I switch both pickups and remain in channel 2, then I finally finish up back on the neck pickup.

I can’t believe the sounds that come from this guitar, and my VRX22 just sounds so sweet with it!

By the way, as far as the recording of the melody goes, I recorded Goldie completely dry, just plugged right into my amp. I then added some reverb and a tiny bit of delay to give the melody an airy feel. The rhythm part was recorded using my Strat directly plugged into my Reason Bambino and played entirely in the Bambino’s Normal Channel. I love the natural presence of the Bambino – it was if it was made for a Strat!

I also recorded the entire song at bedroom level using my Aracom PRX150-Pro attenuator. I just love the purity of my tone at any volume level!

Read Full Post »

It is so hard to believe, but I finally have “Goldie.” I met Adam Hernandez this evening to pick up the guitar, and she is absolutely gorgeous in both looks and sound! I’m still kind of pinching myself because I can’t believe I finally have her. There is absolutely NOTHING like having a guitar that is custom made to your specifications.

Below are just a few pictures that I wanted to share for now. I will take more pictures of her in the morning. I need to play her a bit more before going to bed. 🙂

To see the full pictorial, check out my page dedicated to Goldie!

Sound Clip

I quickly recorded a sound clip of how Goldie sounds clean. In the “rhythm” part, I have both humbuckers going. It has a sweet, chimey, and big tone. The first part of the solo features the bridge pickup in single-coil mode. The second part to the end features the bridge pick in full humbucker configuration. The tones I’m able to produce with this guitar are just amazing!

This guitar has exceeded ALL my expectations, and her sound is so unique. With the coil-tapped humbuckers, I can get a gorgeous, chimey, Strat-like tone to incredibly beefy breakup! The neck is absolutely perfect. It is a perfect “C” at the nut, then tapers out to a flatter “C” at the joint. In fact, with Goldie, Adam discovered a new way to taper the neck that he will be using in future builds!

Goldie was an experiment with wood combinations. What I wanted to achieve with her was a bright toned guitar that had the ability to grow some big, hairy balls, yet at high gain, would retain its clarity. With its solid walnut back, maple top, rock maple neck, and ebony fretboard, Adam achieved exactly the tone I was after. And with Adam’s proprietary and unique neck joint, this guitar sustains for days! I’m absolutely in love with this guitar!!!

For more information about Saint Guitars, visit the Saint Guitar Company web site!

Read Full Post »

Well, Goldie is in her final stages, the clear coat is cured, and Adam is ready to install the pickups. This is amazing! Here are the latest pics:

I just love the open pore finish of the walnut back!!!

Click here to see the whole pictorial story

Read Full Post »

Goldie’s ready for her clear coat! OMG! I just can’t believe it! We are so close now! Had a bit of a setback because Adam, in addition to being a luthier is also a professional forest firefighter. What a guy! Anyway, enjoy the pics!

To see all the progress pictures, see my “Goldie” dedication page.

For more information about Saint Guitar Company, see their site! FYI, Adam’s come up with a Vintage series. I believe this is going to be a semi-hollowbody, with real classic styling.

Read Full Post »

Sorry, no pics today folks… But I did speak with Adam this afternoon, and he said the guitar is ready to go into color coating. I kind of jumped the gun last time I wrote an entry on this… I thought it was going in for finishing! Actually it was going in for its base coat. When Adam got it back, he had to block sand it down. It took awhile because he had a family emergency that he had to take care of the last couple of weeks. But the guitar’s close to being done now – real close. The color coating will go on, cure for a bit, then the first coat of gloss will be applied to the top, block sanded down, then the final thin coat of gloss will be applied. Hopefully I’ll have the guitar in a couple of weeks! I’m so jazzed!!!

In case you’ve missed the previous pics, either click on the “Goldie” tab above, or just click here.

Read Full Post »

Talk about being blown away! I talked to Adam Hernandez of Saint Guitars the other day just to shoot the breeze and let him know I posted an announcement about his new web site. He in turn thanked me, then absolutely blew me away saying that Goldie was ready for finishing and would be done before the weekend! OMG!!! He sent me some progress pictures from just before finishing. BTW, the finish is vintage Les Paul gold…. Again, OMG!!!

In any case, here are pictures of my guitar right before it went into finishing. I just can’t wait to play her!

I know I probably sound like a broken record and maybe a walking billboard for Saint Gutiars, but these are special guitars. Anyone who has played one of these will attest to that. And to have one of my own is just incredible. Adam and Jon just rock the house with their guitars!

They are also coming up with a new “Vintage” model. I don’t know all the details, but it looks like a semi-hollowbody with a trapeze-style bridge. Very retro!

I just have to say this…

I know there are a lot of people out there who have lots of gear, and who trade their axes after a certain amount of time. That’s totally cool. I’ve spoken to some folks who are concerned about the resale value of these guitars. Because this is such a small company, there aren’t a lot of Saints out there, so there’s no price precedence. But in reply to that all I have to say is that from my perspective, Goldie isn’t a guitar that I’d ever consider trading away or selling. Why would I when she was made to my exact specifications?

For sure, Goldie won’t be the last guitar I ever buy. I’m way too much of a gear freak, slut, maniac, what-have-you, to settle with my collection; it’s a living breathing thing. But Goldie will always be special because she’s the very first custom guitar I’ve ever had, but also she’s the very first Saint Guitar I’ve owned.

Read Full Post »

Older Posts »