Feeds:
Posts
Comments

Posts Tagged ‘gear reviews’

Studio Test: Squier Classic Vibe Telecaster 50’s

Posted in gear, gear reviews, guitar, guitar gear, guitar gear reviews, guitar reviews, guitarists, Guitars, Music, musicians, new gear, squier classic vibe telecaster, telecaster, tagged , , , , , , , , , , , , , , , , , on December 6, 2009| 3 Comments »

When I first talked to a guy at a shop about this guitar (it’s someone whose word I’ve learned to trust over the years) about the Squier Classic Vibe Tele, one of the first things he said was, “For the guys who know tone, this is one of the best kept secrets in the industry.” That, from a guy who pedals high-end Fender custom shop axes. His only nit about the guitar was the same as mine: The frets seemed a little small. But other than that, the guitar was a player in his opinion; and so it was with my own estimation of this wonderful little guitar.

Squier is supposed to be the budget line for Fender, and traditionally have been tagged as beginner guitars. But the way this guitar looks, feels, plays and sounds, there’s nothing beginner or budget about it. The build quality is excellent. There are no split or jagged joints or uneven painting. This guitar looks and feels solid. And it’s light, weighing no more than 7 pounds with its pine body and maple neck.

I was excited about this guitar when I first played it, as evidenced by the high marks it got on my original review. I couldn’t believe that a guitar with a street price of $349 could actually be this good. But the one thing that struck me about it was not just its looks, but its tone. This ain’t your typical, thin Tele twang machine. This guitar has balls. The pine body resonates – a lot – and that adds a fatness to the tone that is completely unexpected! Even in the bridge pickup that really brings out the twang, the Classic Vibe Tele sounds like a bridge humbucker with just a touch of twang!

Since I was able to bring one into my studio, I decided to record a couple of clips to demonstrate how fat this guitar sounds…

The first clip features the Tele clean in the neck pickup for both rhythm and lead, though I dirtied up the lead part just a tad.

This next clip demonstrates how the guitar sounds through a fully cranked up amp (Aracom VRX22 with 6V6’s). The three parts feature the neck, middle, and bridge positions of the same chord progression, respectively:

Finally, here’s my new song Strutter again with the Tele played in the bridge position through my Aracom VRX22:

As you can tell from the clips, “thin” is just not part of this guitar’s modus operandi. It’s actually unsettling at first because when I’ve played Tele’s in the past, they were pretty bright and thin. But this guitar just sings and resonates all day long! Must be the pine body. But who cares! It’s a player, and for the money, you just can’t go wrong.

Read Full Post »

Quick Review: StageTrix Pedal Fasteners

Posted in Guitars, tagged , , , , , , , , , , , , , , on December 4, 2009| 1 Comment »

Click for full size view

What do you get when you have a group of product development consultants who are avid guitar players who want to find a way to stop “workin’ for the man,” but not create a bunch of “me too” products? You get StageTrix Products. These guys are brand-new, and from what I can gather, their approach to creating guitar gear centers around what you might call convenience products for guitar players.

Take, for instance, their pedal risers that I reviewed back in October. These gadgets that raise the back row of your pedal board may not make music, but they sure make the making of music a helluva lot easier. Here’s proof: The solo part of my latest song, Strutter, was recorded in a single take, with one punch-in at the very end of the song after I was done. In between sections, I was activating/deactivating effect pedals on the fly – something I’ve never done in a recording. I usually stop the recording, activate the pedals, then continue on. Granted, I had enough time between sections to do the switch on the fly, but I will submit that I couldn’t have done without the back row of my board being raised; in other words, how my board used to be. The point here is that that little convenience made a world of difference for me in my recording.

Enter the Pedal Fasteners. For $9.99, you get a pack of three, pre-cut hook-and-loop strips that are dimensioned to fit standard-size pedals. You might say, “So what? I can just get some Velcro from my local crafts store and be done with it.” You certainly can, but my experience with that stuff is that the glue used with these cannot withstand higher temperatures. They get all gooey, and once the glue has melted, the glue must change chemically, because its sticking power is lost. You ever get that stuff on your hands? I rest my case… 🙂 Pedal Fasteners, on the other hand, have a glue that can withstand up to 200 degrees Fahrenheit; more than enough for even a hot car interior, and the mere fact that you don’t have to cut them to size is killer!

I recently replaced the velcro strips on all the pedals on the front-row on my board with Pedal Fasteners. No cutting, (except for the center section (which you could conceivably push out, but I wanted clean edges and didn’t want to risk tearing, so I used a sharp utility knife). They work great, and even stick to rubber! I’d recommend removing the rubber though… I’ve had mixed results with that, but I did it to test it out – it’s sticking just fine so far.

So if you’re tired of having to cut fasteners to size, and even more tired of that messy goo once the glue has melted, you owe it to yourself to get a couple of pack of these!

For more information, please visit the StageTrix Products site!

Read Full Post »

It Takes Two to Tango… Revisiting the Fane Medusa 150

Posted in amplifiers, amps, Amps/Amplification, aracom amps, attenuator, EL84, fane, GAS, gear, gear reviews, goldie, guitar, guitar attenuators, guitar gear, guitar gear reviews, guitar reviews, guitarists, Guitars, musicians, PLX18 BB, prestige guitars, PRX150-Pro, speakers, tagged , , , , , , , , , , , , , , , , on December 2, 2009| 2 Comments »


When I first reviewed the Fane Medusa 150, though I gave it a pretty good rating at 4.5 Tone Bones, I wasn’t really blown away by its tone because of its big bottom end, and recommended that the speaker be put into a 2 X 12 balanced out by a speaker with more top-end sparkle. What I didn’t consider was how it could be used to balance out the tone of a naturally bright amp.

Take, for instance, my review on the Aracom PLX18 BB Trem. One of the nits I had with the combo was that the Eminence Red Coat Red Fang was way too bright for the already naturally bright amp, causing me to bleed off highs when I was mixing the song. FYI, EQ’ing my guitars in my recordings is usually a real no-no with me because I like the pure sound of my guitars and amps on a recording. The only things I’ll add in production are reverb or a touch of delay if necessary. I love the tone of the PLX18, but that speaker just didn’t work for me.

Enter the Fane Medusa 150. That speaker is actually on loan from Tonic Amps. I’ve actually had it for a few months now, and I keep on forgetting to drop it off at Darin’s new place. Well, it looks like I’m probably going to buy it off him after all because I swapped out the Red Fang for the Medusa 150 in the PLX18, and suddenly the seas parted and a way was made clear! The PLX18 tone was completely transformed! Instead of being a purely bright amp, the PLX18’s tone became much more balanced. The highs and high-mids were still present but were much more tame. This resulted in a much richer tone.

As you may know, I’ve been working on a new song called “Strutter.” I actually had the song completely recorded, but I hadn’t finished it because I just haven’t been completely satisfied with the lead guitar tone. When I got the PLX18, I knew it would be the amp I’d use to record the song. But with the stock speaker, and even with my Jensen P12N, it still wasn’t cutting it for me. I even mentioned that the amp loves the Red Coat “The Governor,” and it does, but I still wasn’t completely satisfied. Now, with the Medusa 150 in the cabinet, I’ll be completing the song. Let’s compare, shall we?

Here’s the original, recorded with the PLX18 BB with the stock Red Coat. I’m playing my LP copy, Prestige Guitars Heritage Elite:

Now, here’s a clip of the song with the Fane Medusa 150. I’m playing Goldie in her bridge pickup:

Sorry for the differences in volume levels. But where the Red Fang has much more presence, and an in-your-face presentation, the Medusa’s tone is so much more three-dimensional and more refined. The mids and highs are still present and incredibly articulate, but they’re so much less piercing! And one thing that I noticed immediately with the Medusa is the clarity of the notes through the entire EQ spectrum, whereas the Red Fang seemed to lose a bit of clarity at high-gain settings – especially when I play those transition chords. Note that the amp and mix settings stayed completely the same between the two recordings, and both guitars were played through the Trem channel which was completely dimed. I also removed the wah from the second clip because I didn’t feel the need to mix it up. For that part, I did stack my KASHA Overdrive and Geek Driver overdrive pedals, but set to unity gain, and to add just a touch of compression and sustain. Not much, but just a touch.

So what’s the moral of the story? Simple: Amp and speaker combinations are critical to good tone. Some speakers, like my P12N work with a bunch of different amps. But some speakers, like the Medusa, work much better at balancing out certain amp characteristics. I’ve learned a good lesson here: You have to try out gear in different configurations and situations. Had I not tried to experiment with the Medusa, I probably would’ve just passed it off as a good speaker that belongs in a 2 X 12 cabinet with a bright speaker.

For more information on Fane speakers, talk to Darin at Tonic Amps! Tonic is the North American distributor for Fane speakers.

For more information about the incredible Aracom PLX18 BB Trem, please go to Aracom Amplifiers.

By the way, both clips were recorded at conversation levels using the fantastic Aracom PRX150-Pro attenuator, by far the best attenuator on the planet, from my perspective. I just couldn’t live without this device!

Now, both amp and speaker get:

Read Full Post »

Where have all the overdrives gone?

Posted in Guitars, tagged , , , , , , , , , , , , on December 2, 2009| 2 Comments »


For the last couple of years, there has seemingly been a glut of new overdrives that enter the market on a weekly basis. I’ve been like a kid in a candy store as overdrive pedals are my favorite pedals. Though I’ve played through tons of ’em, I haven’t written about many mainly because there’s just so much gear out there, and I’ve got a limited amount of time I can spend reviewing and writing.

But I’ve noticed that in the past few weeks, there have been just a couple of new overdrives to enter the market; one of which I purchased (the KASHA Overdrive), and the Skull Crusher overdrive, both made by the same company. Since then, I haven’t seen anything new come out – at least no one is putting out press releases…

Are we at a saturation point now? Has all the overdrive territory been covered? Perhaps it is, or perhaps people are just waiting to release their pedals. One thing’s for sure, the overdrive tap has dried up.

Read Full Post »

Gear Review: Aracom Amps PLX18 BB Combo

Posted in amplifier reviews, amplifiers, amps, Amps/Amplification, aracom amps, EL84, GAS, gear, guitar gear, guitar gear reviews, Guitars, Music, musicians, PLX18 BB, PRX150-Pro, tagged , , , , , , , , , , , , , , , , on November 23, 2009| 3 Comments »

Click on the picture for a larger view. Aracom Amps PLX BB 18

Summary: Reminiscent of John Mayall and the Bluesbreakers, the PLX18 BB is a tribute to the classic Marshall Plexi’s of yesteryear.

Pros: Looking for classic EL84 classic rock/blues tone? Look no further. This amp has tons of mojo that’s just waiting to be tapped, with two independent channels and a subtle, tube-driven tremolo that’s to die for!

Cons: Tiny nit, but the stock speaker – Eminence Red Coat Red Fang – is voiced way to brightly for this amp. For cleans, it’s great, but creates a bit of fizz when you’ve got it cranked.

Features:

General (from the Aracom site)

– On/Off Switch
– Standby Switch
– Indicator Lamp
– Custom Heavy Duty
Aluminum Chassis
– Impedance Switch:
4, 8, 16 ohm
– (2) Speaker Jacks
– Custom Handcrafted
Turret Board
– Handwired
– Gold Plexi Front and
Back Panels

Tremolo Channel

– Single Knob Tone Control
– Single Volume Control
– Tremolo Intensity Control
– Tremolo Speed Control
– High/Low Input Jacks
– Tremolo/Reverb Remote
– On/Off Footswitch Jack
– Reverb: Available with
optional Tube Driven
Reverb in the Combo 1×12
and 2×12 configurations.

Normal Channel

– Single Knob Tone Control
– Single Volume Control
– High/Low Input Jacks

Price: ~$1750 Direct

Tone Bone Score: 4.75 – If it weren’t for the speaker, this would get 5 Tone Bones, but I remedied that very easily by running it through either a Jensen P12N or a Red Coat “The Governor.” I dig that Governor speaker! It really brings out the best in that amp by taming the highs and adding a nice and smooth bottom end.

When you live less than half an hour from a boutique amp maker, you get to try out lots of GREAT gear. It’s so convenient to drop by Jeff’s shop or have Jeff over. He’s someone I love spending time with because we both share a passion for vintage and vintage style gear (Jeff is a passionate Les Paul collector), and we spend lots of time just talking about different kinds of gear, and especially his approach to amp building. As of late, Jeff Aragaki and Aracom Amps have gained a lot of attention in the guitar world for his incredible PRX150-Pro attenuator. And while I love what that attenuator does (it really has made my home recording late at night so much more convenient), it was his amps I fell in love with, and to date, I have three of them, having added the PLX BB 18 to my growing collection of low-wattage amps.

In Jeff’s words, the PLX BB 18 “ …is our tribute to the Marshall 18 watt Tremolo amp that was originally introduced in 1967. The term “Bluesbreaker” originated from the Marshall JTM 45 Tremolo Combo amp that Eric Clapton made famous when he was with John Mayall and the Bluesbreakers. While the JTM 45 Tremolo is the original “Bluesbreaker”, many people also refer to the early 50 watt and 18 watt Marshall amps with Tremolo as Bluesbreaker amps.”

This amp is the elder statesman in the Aracom lineup, and while lots of attention has been paid to his latest VRX line, it was the PLX that gave Jeff his start. Unfortunately, because there are lots of classic Marshall Plexi 18 remakes on the market, the PLX BB 18 is probably his least known amp. That’s too bad because the tweaks Jeff made to the classic Marshall circuit has produced a very distinctive amp that has a mojo that’s almost visceral in its appeal.

Based upon a pair of EL84 power tubes, and an EZ81 rectifier, the PLX produces a very three-dimensional tone that’s at once in your face, but also fills the space you’re playing; and mind you, this is at fairly low levels – maybe loud conversation levels – due to squelching the output volume with the PRX150-Pro. Strike a chord or bend a note, and you can feel the tone! It’s that way with my VRX amps as well. There’s something that Jeff has discovered in building his amps that make them ooze a certain mojo.

Like all Aracom amps, the PLX18 BB is packed full of character. It’s amazing how it responds to volume knob changes and pick attack. But one thing that really strikes me about this amp is how smooth the distortion is when I crank the amp. When pushed hard, it has tons of gain and oodles of dynamics, but they’re very well-mannered. Notes are well-defined, and especially played with humbuckers, bloom nicely when you attack a string. F-in A!

How It Sounds

I got the amp this past Saturday, and I’ve been playing with it since. I spent Saturday evening and most of Sunday just getting used to it, and experimenting with different speakers. As I said, the stock speaker is a little bright (admittedly, I’m experimenting with it), but it’s also brand new, so that probably accounts for the abundance of highs. With time, that speaker will mellow out. But as I wanted to use the amp right away, I ran it through my custom 1 X 12 cab with a Jensen P12N and also my Fender Hot Rod’s cab that has the Governor in it. Amazingly enough, this amp LOVES the Governor. The P12N sounds awesome (and I’m a huge fan of Alinico speakers), but the Governor seems to bring out the best qualities of this amp. Anyway, here are some clips I recorded:

  • This clip features the stock Red Fang. I’m playing my Prestige Heritage Elite (an LP copy) for the lead with the Treble pickup engaged. This is a clip from a song I’m working on called “Strutter.” I normally don’t EQ my guitar parts, but I did bleed off some of the real high-frequencies to cut down on the natural fizz.
  • This next song is called “Plexi Lullaby” because it reminded me of a lullaby. The base rhythm track was recorded on the tremolo channel with my Heritage, then I created a second rhythm track with my Strat. The Lead is also played with my Strat. You’ll notice that you really have to listen for the trem. The tube-driven trem is killer. It’s very subtle and oh so smooth! Almost forgot! The base rhythm track was played through the stock speaker, while the Strat parts were recorded through a P12N, and no EQ was applied to any of the parts.
  • Finally, here’s a simple track I recorded just with my Strat for both parts, running the PLX18 BB through the Governor. This in the drive or “normal” channel of the amp with it cranked up to about 3pm, which is almost full out. To achieve the cleans, I just used a light touch, and played it finger style. I picked the Lead so I could get some occasional grind sneaking in:

I really love the tone on the last clip. The cleans it produces just make me close my eyes and play; which is pretty much what I did when recording the lead part. Just hearing how the chords just rang was so inspiring! The amp the entire time was just on the edge of breakup – it’s so expressive! I just added a touch of room reverb in the mix, but the guitars were all recorded completely raw. I didn’t do any adjustments.

Overall Impressions

I know, I say this quite a bit about Aracom amps, but I LOVE THIS AMP! As you can hear from the clips, it has an abundance of character. Jeff has recommended a few times that I try some NOS tubes with it, as all the pre-amp and power tubes are all JJ’s. But I’ve resisted because it just sounds great with the stock tubes. As I told him, “I know, I’ve got some NOS tubes on hand, but there’s no reason to put them in there. It sounds great with the JJ’s.” I may eventually do that, but for now, I won’t replace the tubes until they start getting dull.

The PLX18 BB yet another one hit out of the ballpark by the humble genius, Jeff Aragaki!

Read Full Post »

Color Me… Transparent

Posted in Guitars, tagged , , , , , , , , , , , , , , , , , , , , , , on November 18, 2009| 3 Comments »

A friend of mine asked me to recommend a pedal that would push his amp into overdrive so it would just be his amp distorting. Naturally, I recommended a transparent clean boost that would slam the front-end of his amp and make his pre-amp tubes clip. So I lent him my Creation Audio Labs Mk.4.23 clean boost (best I’ve ever used, btw). He hooked it up, turned on his amp, slung his axe, strummed a chord, immediately muted and turned to me saying, “Dude, this doesn’t sound right.”

“What do you mean?” I replied,  “It sounds fine to me.”

“It’s too bright!” he exclaimed.

“Dude,” I replied, “That’s how your amp sounds when you overdrive the tubes. Actually, that sounds killer. Lemme try…”

So I took his guitar, and did a couple of riffs, and bent and held a note to get some feedback. The tone was rockin’!

“That was cool, dude, but it’s still really bright,” he said.

“Oh brother, bleed off some highs from your tone knob, for chrissake,” I said, obviously getting a little exasperated.

He did, I played a bit more, then gave the guitar back to him.

“That was better,” he said, “but it doesn’t sound quite right.”

“Ha! That’s because you’ve been using a Tube Screamer for so f$&kin’ long for your overdrive sound, that you’ve never really known what your amp really sounds like when it’s overdriving without any help,” I quipped.

“You know, you’re probably right,” he said, “but it’s what I like, so I think I’ll stick with it. Sorry dude…”

“Hey! Not a problem, you just gave me the material for my next article! Thanks!” I exclaimed.

The point of that story is that for some, transparency isn’t pleasing to them at all. With my friend above, he was used to the Tube Screamer’s mid-range hump, and when he heard his amp overdriving with the full spectrum of the EQ, he didn’t like it all. I also met a dude who uses a compressor that’s always on to fatten his tone and punch through the crowd noise when he’s playing (he plays a lot of open, public spaces). In either of these cases, it’s all good because as the old saying goes, beauty is in the eyes of the beholder.

The reason why I brought this is up is because there’s a lot of talk among gear freaks about transparency; that is, the natural sound of our guitar(s) and amp(s) without any coloration. By convention, transparent tone sets the baseline for our sound, which we then color with effect pedals. That seems to be the convention. For some however, that baseline includes some coloration; like my friend who always has his Tube Screamer on. Again, beauty is in the eyes of the beholder.

Admittedly, for myself, before I started using attenuators to get the natural cranked tone of my amps, I was someone who used a Tube Screamer or OCD to get my grind. Once I started using attenuators, it actually took me awhile to get used to not only the transparent, natural, cranked sound of my amp but also the dynamics as the pedals I used added sustain and compression. But now, and for the last few years, transparency is where it’s at for me, and it has really opened up a whole world of tone for me. More importantly, it has helped me understand how different types of amps, especially tube amps, sound in their natural states.

Please don’t get me wrong, there is absolutely nothing wrong with using pedals to form your baseline at all! But if you do turn on a dime, as it were, and decide to go for transparency, be prepared for a little surprise. When you suddenly experience the full spectrum of EQ from your gear – especially with the case of a great attenuator like the Aracom PRX150-Pro that enables you to get the cranked tone of your amp at reasonable volume levels, you may not like it as your ears are used to the altered tone from your pedals or other devices you’ve had in your signal chain to achieve your baseline tone.

But I will say this: I do argue for creating your baseline tone as transparent as possible. As celebrity chef Emeril Legacie says about cooking, “It’s very easy to add ingredients, but it’s a lot more difficult to take them away.” With respect to your rig, if you build on a good base of transparent tone, it’ll have some very good effects on how you approach your tone. I’ll share with you a few points of what I discovered:

  • I’ve come to appreciate the natural character of my amps. I use four amps (though I normally gig with only two of them). These are all based on different power tubes: 6L6, 6V6, EL84, and 6AQ5. These all have different characters when cranked. When I’m recording, I can pick an amp that fits the type of response I’m after.
  • A fallout of the the first point is that I’ve found that I’m using effect pedals a lot less; especially overdrives, which I still love, but I use only to provide a different character. For instance, while I totally dig the sound of my main gigging amps, Aracom VRX22 and VRX18, the drive channels are on the  bright side when pushed. But if I want a little low-end oomph for some rhythms, I switch to the rich clean channels of these amps, and get my grind from one of my overdrives, like my Tone Freak Effects Abunai2, that has a clipping circuit, plus adds both compression and sustain (this pedal rocks, by the way).
  • Going more barebones in my approach has also made me a better player – especially with respect to sustain and vibrato. Where I used lean on my pedals as a bit of crutch to get sustain, I’ve had to learn how to eek out as much sustain from my guitar using just my fingers. Once I started getting that down, it was a whole new ballgame for me.

Whew! I didn’t mean to write an entire treatise! 🙂 But to close this out, if you’ve never really experienced the natural tone of your gear, I encourage you to do so. It might just blow you away. Then again, you might not like what you hear, and that may give you pause to research getting another amp – that’s never a bad thing…

Read Full Post »

NOS Tubes: They are totally worth it!

Posted in 12AX7, tagged , , , , , , , , , , , , , , , , , , , , on November 15, 2009| Leave a Comment »

I ordered a couple of NOS 1959 GE long plate 12AX7’s a few days ago – they were a great deal – and looks like I’m going to buy several more. NOS tubes is where it’s at for me. What’s the big deal? Well, for one thing, they were made during a time when almost all electronics were run by vacuum tubes, so they’re incredibly reliable. But more importantly, they just plain sound better than any new tube. Not that new tubes are bad – far from it – I’m a big fan of JJ’s and Tung-Sol’s, but they can at times be a bit harsh, and in the case of the Tung-Sols, don’t last very long. For instance, I had a set of JJ’s in my custom Aracom VRX18, an incredible amp powered by two EL84’s. They sounded great in that amp, but the highs could get really fizzy.

When I got the GE’s today, I immediately installed them into the VRX18, and lo and behold, that top-end fizz was tamed! You get that fizz from EL84’s anyway, which happen to power this amp, but those NOS tubes really mellowed out the fizz, and provided a richness in the tone of that amp that I had not ever heard come from it! I was so amazed, that I used that amp on a new song I’ve been working on called, “Strutter.” I may actually call it “Stratter,” as I recorded it with my Strat, but I’m still undecided… Give it a listen:

I probably should’ve had a before and after clip, but what those tubes did was to take the naturally bright tone of the amp, and add a bit of bottom end to it. The amp is still on the bright side, but with that little bit of extra bottom end, it sounds so much richer. Here’s  the amp totally clean, played with Goldie, then into a Hardwire reverb, then into the amp. The tones are simply lush!

Who knows? I might be hearing things, but I’m not alone in feeling this way about NOS tubes. Lots of people will attest to the same thing: NOS tubes just sound better. Whether or not it’s due to their construction or the manufacturing technology of the time. Good NOS tubes sound and feel so much fuller than their modern counterparts. As I eluded to above, it could all be imagination coming into play, but if hundreds of people are saying the same thing, there’s got to be something to it…

Read Full Post »

New Gear: StageTrix Pedal Fastener

Posted in buying gear, effect pedals, GAS, gear, gear announcements, gear find, gear reviews, guitar, guitar accessories, guitar effects, guitar gear reviews, guitar pedals, guitar reviews, guitarists, Guitars, Music, musicians, new gear, pedalboard, pedals, tagged , , , , , , , , , , , , , , , , , , , on November 13, 2009| Leave a Comment »

stagetrix-pedalfastener

Click for full size view

I wrote about StageTrix Pedal Risers awhile ago, and how they elevate the back row of your board to make your pedals more accessible. I’ve been using them since, and they really are a godsend! I did mention that they already came with the fastener already installed, so all you have to do is place the riser.

I really like the fastener they’re using. For one, the material is thinner than most kinds you buy at a store, which means it shapes well to contours. Another thing – and more importantly, in fact – is that the glue StageTrix uses on the fastener can withstand up to 200 degrees Fahrenheit. That’s the best thing. We’ve all had the experience of getting velcro glue on our fingers. It’s a gooey mess! Well, that’s solved with the Pedal Fasteners.

For $9.95, you get a pack of three (click on the picture to get a full size view). You can install a fastener with the middle, or you can remove the middle part, and only use the fastener on the edge of  your pedal. Very cool stuff!

For more information, check out the StageTrix Products site!

Read Full Post »

Gear Review: Squier Classic Vibe Telecaster 50’s

Posted in fender, GAS, gear, gear reviews, guitar, guitar gear reviews, guitar reviews, Guitars, Music, musicians, new gear, squire, squire classic vibe telecaster, telecaster, tagged , , , , , , , , , , , , , , on November 10, 2009| 10 Comments »

5 Tone Bones - Gear has stellar performance, value, and quality. This is definitely top of the class, best of breed, and it's a no-brainer to add this to your gear lineup!

cb_tele

 Squier By Fender Classic Vibe Telecaster 50’s

Summary: Finally! An inexpensive guitar that isn’t just a pretty face like many cheapo guitars. This guitar backs up its great looks with great sound and playability!

Pros: Spectacular, lush cleans from the neck pickup. Nothing twangy about this guitar. The bridge pickup is nicely “trebly,” but not piercing at all! The thin, 50’s-style C-shape neck is to die for!

Cons: This is just a minor nit, and nothing to give points off, but the frets are a little small, and with heavy use, they’ll wear down. But hell! At this price, you can buy two and be way ahead of the game!

Features:

  • Body: Pine (very cool)
  • Neck: 9.5″ Radius, Solid Maple
  • 21 Frets
  • Pickups: 2 Custom-Style Vintage Tele Pickups with Alnico 3 magnets
  • Controls: Volume and Tone
  • Tuners: Vintage-style tuners

Price: ~$349 street

Tone Bone Score: 5.0 – Not sure if I’ve ever rated a Fender product my highest rating, but that’s how good this guitar is!

Being the eternal optimist, I’m always looking for ways to turn a negative into a positive. As I’ve gotten older, my back has started to get a bit sensitive, and gigging with heavy guitars can sometimes be – literally – a real pain!  So I’ve been looking for a lighter alternative that would give me a good range of sounds, from great cleans to hot grind when I need it, and something that I could comfortably gig with and not worry about throwing out my back. I’ve found the guitar: It’s the Squier Classic Vibe Tele! If you don’t look at the headstock, you could swear you’re playing a regular Fender Tele! But this one has a great sound all its own. After last year’s price hike, I had lost hope that Fender would be able to produce anything that was inexpensive that had decent quality and sound, but I stand completely corrected, especially after the price drop of the Champ 600 down to $149, and now, this little secret, the Squier Classic Vibe Tele.

Fit and Finish

The guitar I played today was so well-made, I could’ve sworn that it was an American Tele. The blonde, vintage finish was luscious, and the 9.5″ radius vintage C-shape neck, with its gloss finish was perfect. No air bubbles, no uneven finish. The frets were well-dressed, if a little small, and I could detect nary a burr or sharp edge. It was obvious that despite this being a “bargain” brand, great care was put into building this instrument. Of course, only time will tell how well this instrument holds up, but from what I can tell from this brand-new specimen, it appears it’ll be be a long-lived instrument.

I also love that black pick guard that provides a very cool contrast to the blonde body finish! Nice!

How It Sounds

I’ve played a lot of guitars – especially “budget” guitars, but one thing that seems to be a common theme among the bargain guitars is that lots of them look great, but plug them in, and they’re less than – ahem – inspiring. This is where the Classic Vibe Tele stands head and shoulder above the rest. If I didn’t know better, I’d swear this was an American Tele based upon the quality of tones it produces. But unlike its American cousin, this Classic Vibe Tele has a slightly different tone, and that is not a bad thing at all. A lot of this can probably be attributed to the solid pine body. It’s very resonant, and it is not a bright-sounding wood, which probably accounts for the lack of “Tele” twang. It’s there, but it is definitely not as pronounced as I was expecting. Granted, I was playing through a Fender Hot Rod DeVille 2 X 12, which is known for its ample bottom, so that probably could account for the lack of twang. But hey! That is definitely not a bad thing at all!

The neck pickup, when played clean, has a very Strat-like neck pickup vibe. I love that! It’s smooth, and deep, and when slathered with some gorgeous Fender reverb, has a gorgeous, almost ethereal quality where the notes seem to just hang in the air. The bridge pickup adds top-end sparkle, as expected but surprisingly not so much that it sounds thin and tinny. It’s a slightly brighter version of the neck, which makes sense since the two pickups are the same. But quite frankly, I liked playing in the middle selector position where both pickups are engaged. The tone and gain balance between the two pickups in that position is fantastic.

“Balance” is a great way to describe the tone of the Classic Vibe Tele. It sounds and feels balanced; not bright, not deep. Balanced. And the sustain is absolutely breathtaking! I played a song where I comp chords up and down the fretboard with lots of sliding, bending and vibrato, and the sustain and ring that the guitar produced just made me close my eyes and smile. The guitar guy at the store even chided me with, “Aw Brendan, you play so sweetly!” That got a laugh out of me, but luckily he followed it up with, “That sounds so awesome. That guitar… for guys who are in the know with tone, is the one they’re getting. It’s a great guitar at any price” I’ve known this guy for years, and for him to say something like that is pretty profound.

I didn’t get a chance to really get into high gain, as I was in a store and wanted to be considerate of the other customers, but getting into the Drive channel of the DeVille was a real treat, especially with the bridge pickup engaged. I could tell that this guitar, even though it has that vintage vibe, would produce some singing overdrive. Even with the preponderance of pre-amp overdrive I was using, this guitar was a winner for me!

Overall Impressions

It is absolutely no surprise to me why Guitar Player Magazine gave this guitar an Editor’s Pick in this month’s issue. I first played the guitar at the GP offices a couple of weeks ago, and they told me it had gotten an Editor’s Pick. I didn’t get a chance to really play with it then, but based upon that conversation, I had to try one out. Looks like I’m GAS-ing again, dammit! This is one great guitar! Don’t let the price fool you; instead, let the price guide you. This is truly one of the deals of the century!

Read Full Post »

Reason Bambino: It Was Made for a Strat

Posted in amplifier reviews, amplifiers, amps, gear, gear reviews, guitar gear, guitar gear reviews, guitar reviews, guitarists, Guitars, Music, musicians, reason amps, reason bambino, tagged , , , , , , , , , , , , , , , on November 9, 2009| Leave a Comment »

bambinoSome amps were just meant to be used with a certain kind of guitar. The Reason Bambino is one such amp. Mind you, it sounds great with any guitar, and I play it with a wide variety of guitars. But considering the amp designer, Obeid Kahn, and his love of vintage Strats, it’s no small wonder that the Bambino sound absolutely gorgeous with a Strat.

When I play a Strat, I like to play mostly clean with just a little bit of grit, and the Bambino does this oh-so-well! Here’s a clip of a song I’m working on that demonstrates the Bambino’s gorgeous voice with my MIM Strat with ’57 Tex Mex re-issue pups:

You may have already heard a version of this clip when I demonstrated the KASHA Overdrive pedal, but I thought I’d try the lead plugged straight into the Bambino, and adding just a bit of reverb during production. At least for my Strat in the Bambino, pedals? We don’t need no stinkin’ pedals!

Read Full Post »

« Newer Posts - Older Posts »