Feeds:
Posts
Comments

Posts Tagged ‘musicians’

No, this ain’t an April Fools joke. Fender has just announced a new line of guitars called the “Pawn Shop” line of guitars under the tag of: “Guitars that never were but should have been…” What a cool concept, and the coolest concept I’ve heard from the Fullerton company in a long long time. Essentially, these are “official” parts casters, borrowing from a base model but putting new twists on them. I won’t bore you with details because they’ve just released a new site dedicated to the three new Pawn Shop guitars. Here it is:

http://www.fender.com/products/pawnshop/index.php

The one I like is the “Pawn Shop Fender ’72.” This has a semi-hollow Strat body, a Tele neck with rosewood fretboard, and two humbuckers. YOWZA!!! I totally love the concept! In any case, check it out.

Read Full Post »

Yesterday, I wrote an entry in my golf blog about staying loose, and how important it is to stay loose, both mentally and physically, to have an effective golf swing. All this came out of a drill I learned in a recent lesson that forced me to loosen up both mentally and physically to allow my swing to simply flow. The result has been much longer distance, much more consistency, and really important for this middle-age, overweight body, a lot lest strain on my back. πŸ™‚

This morning, I thought about that article and realized that staying loos applies to playing guitar. I gig a lot – at least three times a week – and one thing I’ve learned is that when I’m tight and tense, I just don’t play very well. I don’t have much feeling, and I end up getting more stressed as the set goes on. If I’m stiff, I’m sure it shows up in my performance, and that’s not enjoyable for ANYONE.

When I detect that I’m stressed out – I usually catch it – I simply take an early break. Get a cup of coffee or a glass of wine, then mingle with my audience a bit. As I usually have friends in the audience, I’ll go to their table and chill a bit. The idea is to take my mind off the gig, collect myself, then go back at it. The net result is that I can pick up my guitar, and start being expressive once again.

At my church gig, as the band leader, it is easy to get stressed out, but I’ve learned to just quietly take band mates aside and just tell them directly something like, “Dude, that wasn’t very pretty…” and chuckle a bit. Then I’ll just suggest they try something else. That corrects the behavior, but then to get over my tightness because of the stress, I simply remember why I’m doing what I’m doing, and doing music for church isn’t about me or the group. It’s about the congregation, and helping them have a better worship experience. If I’m tight and stressed, it shows. Period. And especially in a worship setting, people pick up on that fast because they can tell when you’re forcing it.

But the net result of staying loose is that you free your mind, and it allows you to turn on the creativity and expression. You just can’t do that when you’re pissed or stressed out. I’ve seen some great performers in the past whom I could tell were stressed. They seemed to be in their own world. It’s not very enjoyable.

So stay loose, leave your stress for outside the venue, and ROCK ON!!!

Read Full Post »

I mentioned in a previous article that I play a lot of golf (to be honest, golf and fine wines are my other obsessions besides guitar). While golf and guitar may not really seem very similar, having garnered a bit of skill in both, I can tell you that there are lots of similarities; especially when it comes to gear.

It was an absolutely beautiful spring-like day here in Silicon Valley, CA, so I took a couple of hours to go to the range to practice and what I witnessed at the range today compelled me to write this article. I was about a quarter of the way through my bucket when up walked a guy who kind of made me chuckle. He was decked out in obviously expensive golf clothing: Clean, white and pressed bermuda shorts; white polo shirt with collar upturned; a Fila sweater vest; topping it all off with a Titllest visor advertising his Titlest players clubs (“players” as in low handicap to pro). But even worse was that it was clear that he was looking for a stall to “show off.” What made me laugh was how he was watching people swing. He passed plenty of stalls before he finally picked one two stalls down from me where there were a couple of decent players hitting on either side of him. Talk about Alpha-male syndrome.

Having played for many many years, I’ve noticed that these kinds of players come in two flavors. They’re either REALLY great players (most probably pro), and their clothing is just decorum – though showing off is never a good thing, but at least they have something to show – or they’re total wankers who buy equipment that is far beyond their ability to play effectively because it’s “the best” or most expensive, never thinking that perhaps they should go with gear that will help enjoy the game. Let me tell you, having played with players clubs, you better be able to make great, consistent swings because the sweet spot on those clubs is much smaller than beginner or game improvement clubs.

I watched the guy warm up, and it looked like he had skills. His practice swings had a nice, fluid motion, and his body position at ball address was decent, so I figured he’d be a low handicap player. Then he swung at the ball for real. I had to step away from my own hitting because I started laughing. The guy swung like his torso and limbs were connected to tight rubber bands. It was the jerkiest motion I had ever seen, completely overpowering his club. The net result was that he hit EVERYTHING right and with a huge slice.

I laughed because he reminded me of the “rocker” dudes that go to Guitar Center. They certainly look the part, but then you hear them play. Some are actually pretty good, but most tend to be fairly one-dimensional in their playing, preferring speed over musicality. I suppose that’s okay to just play a single style, but they add insult to injury by cranking up whatever they’re playing, with no regard for the other customers in the store. A lot of times, it’s just not a pretty sight.

I guess I’m just taking exception to the attitude: Hey! Look at me! Forget about how I sound – I sound great, and am a legend in my own mind – but don’t I look great?!!! Well, confidence is one thing, but as Frank Herbert wrote in “The Lazarus Effect,” “No one likes an a@#hole.”

Read Full Post »

Meh. Nothing really new, just a new attenuator to enter the market. It’s a bit funny the claim he made about the Rock Crusher being the only switchable impedance attenuator on the market today. He obviously didn’t research the Aracom or Faustine attenuators. Another thing he mentioned about an impedance mismatch with an 8 ohm output hitting a 20 ohm load blowing a transformer I found amusing. Possibly the other way around could do it, or a blown tube, but that kind of mismatch wouldn’t do any harm to your amp. From what I understand, all an impedance mismatch like that would do is reduce the output power of your amp. Can you say Ultimate Attenuator, which a lot of people use? πŸ™‚ It attenuates by using a 30 ohm resistor.

I do like some of the features on his attenuator like the balanced line out. That’s pretty cool. But overall, since I already have a couple of fantastic Aracom attenuators, I’m just not too excited.

But I have no doubt that Rivera will have success with this as they already have a dealer chain, plus the price is $499, which is half as much as the Faustine, and not much more than the Alex which is a single impedance device. Even if it only has two impedance settings, you’d have to get two Alex’s to get that capability. It is less than the Aracom, which is $649 for the Pro, but with the Aracom’s input and output impedance matching, plus its technology, I’ll stick to my Aracom.

Read Full Post »

You gotta dig the folks over at EHX. They take classic designs then put their own unique twist on them. I’ve been considering getting one of their envelope filter pedals forΒ  awhile, but then they recently released a harmonizer pedal called the Voice Box that is very intriguing. I myself have been using DigiTech’s Vocalist Live 4 for a few years, and it has served and continues to serve me well. But after a few years of gigging, things are starting to wear down, and some buttons are just plain broken.

As such, I’ve been looking at either getting a new VL4 or going with a completely different unit altogether. The TC Helicon VoiceLive Touch seems pretty cool, but this new entry by EHX warrants a deep investigation; especially as it is priced at under $220 street, where the VL4 and VoiceLive Touch run about $500.

Granted, the Voice Box doesn’t have many tweaking features, and it doesn’t have nearly the amount of presets as the VL4 or VoiceLive. However, from what I could gather from watching a couple of videos, the sound quality of the harmonies is great, and it includes a vocoder! Now THAT is cool!

For me as a solo gigging musician, a harmonizer has been an important part of my rig. And after years of use of my VL4, I have to admit that I only use four of the 100 presets of my VL4 – just four! So with the EHX’s nine presets, if I can get the harmonies that I use most often, then I may just have to get it. Besides, at around $220, it’s not going to run me broke. It also means that as a pedal, I can mount it on my pedal board, and not have a big unit that I have to run separately into my board. As I only use three effects on my board, there’ll be plenty of real estate to take this pedal!

Here’s a video:

Read Full Post »

I have a LOTS of pedals, but sometimes I forgo the use of them in order to just keep things simple. For instance, while I was in my studio this evening working on a new song, I got a little sidetracked and started jamming to a little chord progression that I quickly came up with to warm my fingers up. So much for the songwriting tonight as I ended up looping the chord progression and playing over it – for about two hours. I finally decided to record a clip.

In the clip you’re about to hear, I’m using Amber, my trusty Les Paul R8, plugged into my Aracom Amps PLX-18 BB Trem, which is a 18 Watt Marshall Plexi clone. I’ve been gigging with this amp a lot as of late, as its tone is just to die for! In any case, I recorded the rhythm part with the guitar plugged straight into the amp. Then for the lead, I cheated a little and added a boost pedal to slam the front-end of the amp with gain so I could make sure the power tubes compressed a bit. The amp was in the drive channel cranked all the way up. Also, the rhythm part was done with the guitar in the middle position, while the lead was on the bridge pickup.

I did master the clip a little bit, and added some EQ texturing on the master track, but I left the guitars alone EQ-wise, and only added a touch of reverb to each track. At least to me, the end result is just pure, cranked Les Paul/Vintage Marshall tone. No distortion or overdrive pedals, just getting my distortion from gain. The is just letting my fingers do the talking. πŸ™‚

I remember when I was weaning myself off of drive pedals, it was really hard because all the drive pedals I have add a bit of sustain. But with no pedals, you just have the natural sustain of your guitar and the sustain that comes from overdriving the amp. But once I got used to it, and learned to wiggle my strings effectively, I found I preferred playing like this most of the time. But that said, I will always have drive pedals on my board as they produce distortion sounds that my amps can’t produce by themselves, and they do come in handy for lead breaks when I’m performing live.

Read Full Post »

Yeah, I suppose I’m a gear critic, considering the nature of GuitarGear.org. But one thing that I NEVER wanted to do was establish myself as someone who came off as “my word is is law.” To be honest, I would consider myself an expert on guitar gear – at least in general with respect to guitars and peripherals and how they all work together – but I also realize that my own proclivities and tastes are my own. And despite the fact that I employ rigorous testing in both studio and on stage, inspect every piece of gear closely, looking for build or finish flaws, or admiring the workmanship of some gear; in the end, my analysis is simply… an opinion. Because of this awareness, I’m always careful about making gear recommendations. I rarely, if ever, tell readers that they have to buy something; rather, I suggest they check it out and try it for themselves.

The reason I’m covering this particular subject is because as I was reading through some wine reviews this morning (yes, that’s yet another passion of mine besides guitar and golf), I realized that the critics I gravitate to are the ones whom I consider to have considerably more expertise than me, but rather than dictate, they suggest, and also provide contrast by illustrating similar wines.

Then I looked at my participation in various online forums, and the various so-called experts that practically live there. There are some for whom I have great respect and admiration who give and have given me some great insight and advice on various gear topics. But there are others who love to bandy about their knowledge, pulling out their credentials as proof that you need to listen. The worst thing is that they’re all very eloquent so many people are taken in by the things they say and advise, then they go out and buy a particular gear that the “expert” says they need, and they’re convinced beforehand that it’s everything they need; only to find out some time later that it just doesn’t work with their sound.

Look, I’ve been down that road; hanging on every word that a so-called “expert” says. And yes, I’ve been burned. Just remember this, as said in the movie “Platoon:” “Opinions are like assholes. Everyone’s got one.” πŸ™‚ Seriously though, and I know, I repeat this all the time. Don’t just take the word of someone who raves about gear. Try before you buy. And if you can’t try it, make sure you do your homework and research!

“guitarboy” who is a reader of this column teased me recently about getting my Timmy pedal. To be completely honest and transparent, I’ve never played one. But I did do my research, listening to tons of clips, and fortunately for me, seeing/hearing one in action at a friend’s concert (Dylan Brock of “Luce”) where I could see how he set it. I was also able to talk to him after the concert to get his insights on the pedal. That particular conversation sold me on the pedal.

Read Full Post »

I suppose I’m not the only one who has a bucket list, but I thought I’d share mine. And no, I’m not thinking about my life ending, but the other day I thought about things I’d like to do, see, or have before I die. So here goes (not in any particular order):

  • Build a huge wine cellar devoted to my favorite wine, Pinot Noir; focused specifically on California, Oregon, and Washington, categorized by region and appellation. Oh, I’d also stock it with French Burgundy as well. I suppose I should share that I also have a blog about Pinot Noir called The PinotPhiles.
  • Play a real ’59 Les Paul, if not outright own one. And it wouldn’t sit in a glass case. I’d play it.
  • Own an original Marshall JTM-45 and an original Plexi 50
  • Have all classic Les Paul Reissues: R7, R8, R9, and R0
  • I’d really like a Corvette Z06.
  • Speaking of automobiles, one of my dreams is to see the F1 Monte Carlo Grand Prix, and have a room that is on the Casino Turn, overlooking the race course.
  • Back to music, once the kids are grown up – or maybe earlier – I’d love to build a nice studio/sound stage in my back yard.

Well, that’s all I can think of for now… πŸ™‚

Read Full Post »

The danger about being a gear freak or have a mania for anything is that you can easily waste lots of money chasing an ideal. Think about it a moment: Lots of things influence our decisions to purchase gear; and not all are that reasonable. We gear freaks tend to be a fairly compulsive lot. Something might look cool or feel or sound great in the shop; we read about something in a forum; see something in a magazine; all triggers for GAS.

Though I still get GAS and am intending to buy yet another guitar very soon – a Gretsch Electromatic 5122C – I’m not nearly as compulsive as I used to be. This is because about a year ago after I had amassed a bunch of gear, I looked at my studio with the line of guitars, stacks of amps and cabs, three pedal boards (with more in a special cabinet drawer), and said, “Damn! You just gotta play yer gear.”

I realized in that moment that I had a bunch of stuff that I’ve hardly used at all; for instance, a BOSS practice unit that sits on my recording console desk that I rarely if ever turn on. Or I have some pedals that are simply collecting dust. I resolved then and there to slow down my buying and be much more calculating with my purchasing decisions. After all, I told myself, you bought this stuff to play it, so play it!

The TC Electronic Corona Chorus was the first pedal I’ve purchased in about six months. I’ve looked at several, but haven’t pulled the trigger. I do have to admit that I didn’t necessarily “need” a new chorus, but the Corona sounds so damn good that I just had to have it. πŸ™‚ Truth be told, it’s affixed to my main board and will not be leaving it. And that’s a real driving force for my purchasing decisions: Will I really be playing the gear in question. I gig at least two days out of the week, and I’ve stepped up my studio time as of late, so the gear I get has to be relevant to what I’m playing.

The net result of that shift in mentality is that my rate of picking up gear has significantly slowed; though I admit it gives me more to invest into fine wine and golf. πŸ™‚

Read Full Post »

I’ve gotten to the point in my playing where I’ve pretty much established my base tone, so I’m extremely sensitive about the pedals I add to my rig; especially modulation effects. To me, they should only enhance my tone, and not define it. I should still sound like me whether I have a particular modulation effect on or off. In other words, if the effect is off, I shouldn’t feel as if something is missing from my tone. There are, of course exceptions to this rule of thumb, like my Boss CE-2, where I actually want my tone altered, but in general, I want my modulation effects to simply “fit” with my tone.

Such is the case with TC Electronic Corona Chorus. It simply “fits” with my rig. I’ve been playing with it for the last hour or so, and the more I get to know it, the more I absolutely love it. And all this for $129? This is a winner. In any case, I’ve recorded a couple of clips to demonstrate the pedal. Mind you, all these were done in the standard chorus mode. I haven’t started playing with the TonePrint or TriChorus much yet.

Subtle/Clean

The first clip has me playing clean fingerstyle with a short song. I do the song first without the pedal engaged, then play the song over with the pedal engaged, just adding some subtle chorus. The result is simply amazing:

Liquid/Clean

In the next clip, I do sort of a funky rhythm with a syncopated bass line. Here I’ve turned the FX Level to past 2pm, the Depth to 2pm and Rate to noon. What I get is a real liquid tone:

Swirling/Dirty

In this final clip, I add a little more depth and FX Level, then get into the dirty channel of my Hot Rod Deluxe. The result is a flange-like swirling tone. The interaction with the distortion of the amp is totally cool – at least to me:

Read Full Post »

« Newer Posts - Older Posts »