Wanna slam the front-end of your amp with up to 50dB of gain, then be able to add some distortion? Then look no further than the Way Huge Angry Troll. I don’t have much information on it yet, but it’s a simple two knob affair. The left-hand knob controls the variable boost, while the right-hand knob provides 6 positions of “Anger” from no anger (clean boost) to a full fist. Here’s ProGuitarShop.com’s video demo.
Posts Tagged ‘pedals’
New Gear: Way Huge Angry Troll
Posted in booster, clean boost, distortion, effect pedals, Effects, GAS, gear, guitar, guitar effects, guitar gear, guitar pedals, guitarists, Guitars, Music, musicians, new gear, pedals, tagged distortion, effect pedals, Effects, GAS, gear, gear announcements, guitar, guitar effects, guitar gear, guitar pedals, guitarists, Guitars, Music, musicians, pedals on October 7, 2009| Leave a Comment »
New Gear: Routed Pedal Risers from StageTrix Products!
Posted in effect pedals, Effects, GAS, gear, gear announcements, gear find, guitar, guitar effects, guitar pedals, guitarists, Guitars, Music, musicians, new gear, pedalboard, pedals, tagged effect pedals, Effects, GAS, gear, gear announcements, gear find, guitar, guitar effects, guitar gear, guitarists, Guitars, Music, musicians, new gear, pedalboard, pedals, StageTrix, StageTrix Products on September 18, 2009| 5 Comments »
One of the things that completely pisses me off when I’m gigging is when I reach my foot out to activate a pedal in the back row of my board, and I end up also activating a pedal in the front row. Aiiiyeeee!!! This happened to me recently at a church gig. I was playing a nice, sweet, clean solo, and want to texture my sound a bit by adding some reverb.
To give some background, my reverb pedal (Hardwire RV-7) is the last pedal in my chain and it sits right above my Holy Fire overdrive. Instead of a toggle switch, the RV-7 has a switch plate, and the travel before it actually activates is enough so that I have to really point my toe so I don’t brush my Holy Fire’s knobs or accidentally activate it. Well, in this instance, I did both: I somehow completely dimed the overdrive knob AND activated the pedal. The next note I struck not only startled me, but also startled the prayerful assembly – enough so that some people actually squeaked! Yikes! No doubt, it was a bit embarrassing…
Then today, I got a Twitter alert that a new user called StageTrix was following me, so I went to Twitter to do an exchange follow, and on StageTrix’s site, I saw a Twitter reply from Premiere Guitar. Intrigued, I checked out their site, and was greeted with a solution to my problem: An 18-gauge steel pedal riser that you can use to prop up the second row of your board to make your back row of pedals more easily accessible! What a great freakin’ idea! It’s one of those ideas where you slap your forehead and say, “Now why didn’t I think of that?” 🙂
I had the opportunity to chat with one of the StageTrix guys a few minutes ago to discuss StageTrix’s invention. They’ve apparently been developing it for about a year and a half, and doing prototypes with various musicians. And their reason for building it? Exactly for what I was lamenting just above!
Here are some details from their site:
- Raises the second row of pedals to the perfect height.
- Front, back and side openings enable effective cable routing.
- Premium 18-gauge steel.
- Attaches to board via heavy duty hook-and-loop fastener on base, which holds firm up to 200°F.
- Designed to withstand temperatures of up to 200F without melting, so leaving your pedal board in your vehicle on a summer day won’t result in a gooey mess with all the Velcro peeling off.
- Works with most pedalboards. To be sure, check that you have an extra 1″ of clearance when case is closed. The vast majority do.
If you go to their site, they’re doing a promotion by putting several of these units up for bid on EBay, with a starting bid at a $1.00. These pedals list for $23.99 on their site, so it’s possible that if you get the winning bid, you could get one for significantly less…
Right now, they’re only available through StageTrix, but they should soon be available in stores. I will be getting a review unit within the next week or so, and will do a review.
KASHA Is At It Again!!!
Posted in announcements, effect pedals, Effects, GAS, gear, gear announcements, gear find, guitar, guitar effects, guitar gear, guitar pedals, guitarists, Guitars, Music, musicians, overdrive, pedals, tagged effect pedals, Effects, GAS, gear, gear announcements, gear find, guitar, guitar effects, guitar gear, guitarists, Guitars, Music, musicians, new gear, overdrive, pedals on September 17, 2009| 2 Comments »


How ’bout a completely different take on an overdrive pedal? Well KASHA is at it yet again, teaming up with Tone Box, Inc., with the brand-new Skull Crusher Drive! Utilizing KASHA’s RockMod technology, the Skull Crusher sports four voicings and a tone and gain knob. Plus with a 10db boost, you have 8 different analog overdrive possibilities in a single pedal!
Sounds hauntingly similar to the KASHA overdrive pedal I just tested last week. It is a bit different, as it has a Tone knob, which is different from the KASHA overdrive. But I can personally attest to the quality of the tone of the KASHA overdrive, so you can bet the Skull Crusher will have that same sweet tone itself!
BTW, my KASHA OD is in production and on its way. I got lucky, and will be getting one of the signed models with a handwritten serial number… Oh goody! Might be able to sell one of these for a grand in 30 years! HA!
In any case, I’ve never seen a pedal like the Skull Crusher before! This is a totally new approach to pedals, adding a visual as well as tonal touch to an effect. The pedal will be distributed by Tone Box, Inc. and will retail for $399.
As for the physical appearance of the box, each pedal is hand-sculpted stainless steel, and comes in four finishes: gun metal, stainless steel, aged and ancient. According to KASHA, there will also be 24K gold and Sterling Silver models as well. Damn! Imagine having a stomp box that’s worth more than your guitar! HAHAHAHAHA!!! I LOVE IT!
New Gear: Kasha KA-ODP-A 4-Channel Overdrive Pedal
Posted in announcements, effect pedals, Effects, GAS, gear, gear announcements, gear find, guitar, guitar effects, guitar gear, guitar pedals, guitarists, Guitars, Music, musicians, new gear, overdrive, pedals, tagged distortion, effect pedals, Effects, GAS, gear, gear announcements, gear find, guitar, guitar effects, guitarists, Guitars, kasha, Kasha KA-ODP, kasha overdrive, Music, musicians, new gear, overdrive, pedals on August 22, 2009| 4 Comments »

Awhile ago, I was perusing a forum where one of the members mentioned in a reply that it’s a good time to be a guitarist. There’s so much varied gear out there that guitarists have all sorts of options to choose from. One area of guitar gear that certainly seems to get regular entries is the overdrive pedal.
The OD pedal is something of which I never tire. There are so many great ones out there – I just can’t get enough of ’em. One such pedal that has just recently caught my eye is the KA-ODP-A 4-Channel Overdrive Pedal from Kasha amps. This pedal promises to be something special. Check out its features:
– 4 channels with separate voicing and gain structure
– Analog design
– 10 dB clear boost
– True bypass switching
– Very low power consumption (3mA and runs on a single 9V battery)
– No tone change, only enhances sound
– Compact standard aluminum chassis (4 3/8″x2 1/4″ x 1 1/4″)
– AC power jack (uses standard Boss DC power supplies)
– High gloss mirror black powder coat
– Hand made in the USA
– Low noise
– Crystal Blue LED (high intensity)
– Weight: 1.5lb
Built By an Amp Builder
There’s something about gear that’s built by an amp builder, especially when it comes to pedals or other peripheral devices. Amp builders have an innate understanding of the electronics behind tone, and how peripheral devices interact with their amps. A great example of this is Jeff Aragaki from Aracom Amps and his brand-new attenuatore, the Power Rox PRX150-Pro. Jeff totally gets it with how an amp interacts with a speaker, and the Power Rox is a testament to that. The same may be said of the Kasha overdrive in front of an amp. I had a chance to speak with John (Kasha’s owner and builder) this afternoon about the pedal, and it was clear from our conversation that this guy really understands the interplay between effects and an amp – especially with respect to overdrive.
Kasha has been around awhile, having been building the famous ROCKMOD line of amps since the 80’s, so they know something about amps, and their tone is well-known. Guitarists such as George Lynch and Davey Johnstone (Elton John), and tons of session guitarists have been playing ROCKMODS for years. So when John decided to build an overdrive pedal, he didn’t want to model it off of traditional circuits, so he created his own. The result is the 4-Channel Kasha Overdrive.
What’s very intriguing about this pedal is that it doesn’t have an EQ. John designed the pedal in such a way that it preserves the tone going in and outputs it with some OD “flavor” as John puts it. The thinking is that you don’t need an EQ if you’re not doing anything to the EQ of the signal. Smart.
The Kasha overdrive is a lesson in simplicity, having only two knobs: An overdrive selection knob to choose from one of the four different overdrives, and a gain knob. Very simple. But it also sports a “Turbo” switch at the top which will add a 10db clean boost to slam your pre-amp tubes with even more gain. But despite all that, this thing operates on 3 milliamps and only requires a standard 9V power source! That is incredible! My beloved Holy Fire requires a special 48V power supply! So what John has created is definitely special.
I’m going to be trying this pedal out in the next coming weeks, and I’m excited! I’ll keep you posted!
For more information, go to the Kasha product page (scroll down to the end to see the overdrive)




