Feeds:
Posts
Comments

Posts Tagged ‘wicked woody’

Click on the picture to see an enlarged view.

Wicked Woody “Original” Pedal Board

Summary: Handmade with carpentry-grade wood, this is one gorgeous pedal board. Nothing like making something so utilitarian a virtual work of art!

Pros: Completely handmade with high-grade wood that doesn’t only look great, it’s lightweight as well! Platform is reversible so you can configure the board to have your volume or wah pedal on either right or left sides. Lots of space under the platform to fit a power brick and stow your plug, and the routing on the top makes it easy to run your cables.

Cons: Could use some rubber or silicon feet to protect the bottom from scratching and elevate it above possible spills (think bar gig).

Features:

  • Elevated pedal platform. With an elevated platform, it is both easier to see, and easier to reach all of your pedals.
  • Handmade, of the highest quality certified hardwood plywood. Durable finish that will protect your woody for life.
  • Easy cable management, with the cable chanels routed into the platform it is a cinch to place your pedals in any configuration you desire, and wire them however you would like.
  • Alternative storage, under the platform for your power supply or other storage needs.
  • Measurement: 24″ X 15″

Price: $80 direct

Tone Bone Score: 4.75 ~ I’ve never seen a pedal board that looked so nice. Despite its looks though, I really would’ve liked to see some “feet” on the bottom for some extra protection. Something that looks this good should be really protected. That said, it’s easy to get some hardware that’ll do the job with minimal effort. But if it had that right off the bat, I’d give this puppy a 5.0!

For Goodness’ Sake! It’s Just a Pedal Board!

I would venture to guess that most players don’t really put to much thought into the “look” of their pedal board other than if the cables are nicely arranged and out of the way. But lots of players obsess over the look of everything in their rig; even down to their pedals’ paint jobs. So why not put them on a platform that really shows them off, as well as being useful? Aesthetics are a good thing. Myself, I tend to be far more practical to even consider something like this, but hey! Cool is cool in my book, and although I may not normally consider having a board like this, that doesn’t take away from the fact that this is one gorgeous piece of functional hardware!

From my point of view the Wicked Woody pedal board is like a nicely shined pair of shoes. Most people wouldn’t normally notice them, but they do notice that there’s something “nicer” when you wear them. Such is the case with the Wicked Woody. It’s not a showy and sparkly, but it just looks well, nice. Besides, there’s nothing sweeter-looking to me than nicely grained wood, and all Wicked Woody pedal boards are made of high-grade woods, with a nice, smooth finish. In other words, the provide a sweet presentation platform for your pedals!

Setting Up the Board

When I received my evaluation board today, I was amazed by how lightweight it was, but it was absolutely solid. The plywood used would not bend or give at all! But in addition, it looked fantastic! I know, it’s kind of hard to be excited by something so utilitarian, but this board looks so good – it kicks ass!

Luckily, my evaluation board also included some velcro strips, so it was a simple matter of attaching them to the board. I got a fairly long length, so I just cut it in two and laid the strips straight across the board. If I were to actually keep the board, I’d be a lot more meticulous and place strips so the they don’t show at all. But for my evaluation, I just wanted to be able to easily arrange my pedals.

I have to say that I’ve never seen my pedals look so good. 🙂 Here’s a picture:

A very cool thing that I liked immediately was that the platform fits my back line of pedal risers perfectly! Four pedal risers fit exactly flush to the edges of the platform. The folks at Wicked Woody say you might not need pedal risers, and based upon the space between the front and back lines and the nice angle of the platform, I’d tend to agree with that. But with my clumsy, double-E feet, I need every advantage I can get, so it’s very convenient that the platform fits the pedal risers so perfectly.

You can clearly see the route in the center. There are actually two routes, but the upper one is obscured by my pedal risers. But both are very conveniently placed. The platform has a round hole on each side to run cables through as well. That is very convenient as I was able to run the power and connector cables underneath the wah. Then to connect the wah to my next pedal, I ran the connector through one side hole, then out the other side hole to connect to my CE-2. When all was said and done, I was impressed by the arrangement. Plus, the big base board really creates a nice spacious effect.

Now I know there’s a lot of debate with the placement of a wah pedal. Should it be before or after the drive pedals? I happen to prefer mine to be placed after my drive pedals, so the default arrangement, with the wah pedal on the left was perfect for me. However, for those who prefer it to be on the other side, the platform is reversible. You just have to unscrew the platform from the bottom of the board, turn it around, and you can place your wah (or volume or expression pedal) on the right side.

I didn’t take a picture of the back of the platform, but there’s plenty of room underneath. I placed a fuzzy strip underneath the platform, and put my Dunlop DC Brick there then ran the power connectors to the pedals through the routes. Having those routes is a real nice feature because it keeps your power cable runs nice and neat – and hidden from view. There’s also plenty of room underneath to place a spare pedal or two (as long as they have a low profile), and of course, you can stow your plug underneath during transport.

The eval board didn’t come with a case, so I’m not sure if there is one available. Hopefully there is one available because I’d definitely want one to transport the board to and from gigs if I owned one of these beauties.

So… overall impression? I dig this board. It looks fantastic, but it has some very nice features that make setting up your pedals a breeze. It literally took me less than 10 minutes to get everything hooked up. Granted, if I owned one of these, I’d take a bit more time to make everything perfect, but one could do a lot worse.

Update: April 1, 2010

Just got a message from the folks at Wicked Woody. They don’t have a case for their boards yet, but should have one as an option within the next couple of weeks. This is great news!

For more information, go to the Wicked Woody site!

Read Full Post »