Feeds:
Posts
Comments

Archive for the ‘amplifiers’ Category

Saint Guitars Messenger Baritone

Saint Guitars Messenger Bariton

Saint Guitars Messenger Bariton

Just wanted to share some initial sound bites that I created with a couple of new pieces of gear. The first is a Saint Guitars Messenger Baritone. Before now, I had never played a baritone, and really didn’t know what to expect. But after playing around with it for a few days, I have to say that I just love how this thing sounds. Baritones have been getting more and more popular as of late due to their very low, natural tone, and several metal players have started using them because of this. But I truly believe that a good test of a guitar or an amp is how it sounds clean. Played clean, you can’t hide mistakes. So here’s a clip that I created this morning to demonstrate the beautiful, clear tone the Messenger Baritone creates.

The guitar was played through the Normal channel of a Reason SM25 amp. As you can hear, the tone is deep, but surprisingly chimey due to the bright-sounding walnut body and neck, Adam Hernandez’ tone wood of choice. It took awhile to get used to playing the wider frets, but once I got a handle on it, I just started loving how this guitar plays and sounds!

Aracom Amps RoxBox 18 Watt Head

Aracom Amps RoxBox 18 Watt Head

Aracom Amps RoxBox 18 Watt Head


You know me, in addition to just digging on overdrive pedals, I love low-power amps! When Jeff at Aracom initially contacted me, I had never even heard of Aracom amps! And I pride myself on knowing about these things! Yikes! So when I perused his site, I was immediately taken by the RoxBox. And after just a day of using it, I have to say that I LOVE THIS LITTLE AMP!!! First, because it’s a low-wattage amp, which makes it very versatile, and secondly because it comes equipped with EL-84 power tubes! There’s a brightness in the EL-84 tubes that just makes my soul reverberate, and I just dig the sounds that this amp can produce. But just as with the Messenger above, the big test for me is how the amp sounds clean. And baby, it sounds great clean! The sound bite I have here uses the same clip above, but layers on a lead part using just my Strat played through Channel 1 of the RoxBox. Channel 1 has TONS of clean headroom, and even ‘buckers have a hard time making this channel grind. This will definitely score well with the pedal freaks like myself. Anyway give it a listen:

This little amp is nothing short of impressive, and priced at $895 for the head, it’s also an incredible value!!! Kudos to Jeff at Aracom for creating an attainable hand-wired amp! Looks like I’m going to be shelling out bucks for both the Reason SM25 AND the Aracom RoxBox.

Read Full Post »

Aracom Amps RoxBox 18 Watt Amp

Aracom Amps RoxBox 18 Watt Amp

I love writing this blog. Not only do I get to share my passion for guitar and guitar gear, in the couple of years since I started this blog, I’ve met and encountered some really great folks who also share the same passion. After all, it’s why you visit, and I thank you for all the support you’ve given me! When I started GuitarGear.org, I didn’t have any idea of where I’d go with it. I just started writing; not very often at first, but then it just kind of took on a life of its own as I found other great gear blog sites, and started interacting with the general blogging community, and the people I’d meet on other sites would visit my site. That’s what has kept me going, and it’s just an amazing thing!

Of course, it’s really cool to review gear, whether I own it or test it, then share my findings with folks. And speaking of reviewing gear, in this article, I’m introducing what looks to be a real promising, new amp company, called Aracom Amps! They have a whole line of reasonably affordable, hand-wired amps modeled mostly after classic Marshal amps. From what I could tell from the sound samples, these are very nice sounding amps, and the few reviews I’ve been able to find have all been exceedingly favorable. So like I said, there’s a lot of promise in this relative newcomer to the custom, hand-wired amp space.

Jeff from Aracom contacted me the other day to see if he could buy some ad space on my site. I replied that I had never even considered doing that because I didn’t want to commercialize the site. The most commercial thing I’ve done to this point is to put “click-throughs” to Musicians Friend on some of my review pages so people could buy gear directly, but I never actually expected to make any serious money from the site. However, I did tell him that at the very least, I’d review some gear for him, and if I really loved it, like I do with Reason Amps and Saint Guitars (by the way, I just got a new baritone yesterday to test, and IT ROCKS!!!), I’d make a banner for him and put it on my site.

So I am now awaiting delivery of what I think is a very, very cool EL-84 based 18 Watt amp called the RoxBox. It’s completely hand-wired on turret board, and it comes in a head version (which is what I’ll be initially reviewing), and in two different combos: A 1 X10 and a 1 X 12. Nice. It has two individually voiced channels with independent volume and tone control, and is also switchable down to 9 Watts. So this promises to be a very versatile little amp. To say I’m extremely excited about receiving this amp is putting it mildly. The reason why I’m so excited is because the most you’ll pay for one of these is $995.00!!! Imagine that! A hand-wired amp for less than a grand! It’s unheard of! And all Jeff’s amps are very reasonably priced.

Let’s look at some features:

General Specifications:
– (2) EL84 Power Tubes
– (2) 12AX7 & (1) 12AT7 Preamp Tubes
– S.S. Rectifier with “sag” circuit
– Hi/Low B+ voltage switch (18/9 watts)
– On/Off Switch
– Indicator Lamp
– Custom Heavy Duty Aluminum Chassis
– Custom Wound Transformers
– 4, 8, 16 ohm Speaker Jacks
– Custom Handcrafted Turret Board
– Handwired

Head Cabinet
Standard Tolex: Black Levant. See options below for other colors.
– Dimensions: 19″w x 8h x 8.25″d
– Weight: 23 lbs

Combo Cabinets
Standard Tolex: Black Levant. See options below for other colors.
– Dimensions
1×10 Combo: 18″w x 19h x 10″d
1×12 Combo: 18″w x 19h x 10″d
– Weight
1×10 Combo: 36 lbs
1×12 Combo: 39 lbs

Introductory pricing:
Rox Box Head $895
Rox Box Combo with 10″ Jensen ALNICO Speaker $995
Rox Box Combo with 12″ Jensen Ceramic Speaker $995

Pretty impressive!

I had a great conversation with Jeff this morning about his amps’ price points, and he said that considering today’s economy, he wanted people to be able to buy his amps, and since he does all the work himself, and has done a tremendous job with planning his manufacturing (for example, all his amps use the exact same chassis template), he can keep the price down. With the RoxBox, he was able to keep the price point down further by using a solid-state rectifier that simulates a rectifier tube’s voltage sag rather than using a tube rectifier. Now before you dismiss this, remember that the venerable Fender company has been using solid state rectifiers in their amps for decades, and no one complains about their gorgeous sound! But besides that single piece of solid state componentry, everything else is hand-wired and tube-based.

Check out the RoxBox and other Aracom Amps at the company web site!

Read Full Post »

Reason Amps SM25 25 Watt Combo Amp

Reason Amps SM25 25 Watt Combo Amp

Reason SM25 25 Watt Combo Amp

Summary: Incredibly expressive and versatile amp that can deliver a wide range of tones from glassy, sparkly cleans, to lewd, rude, and crude distortion, all in a single cabinet!

Pros: Killer tones in all channels. Amp is voiced bright by design, which makes it great to use in the studio. StackModeTM is the best thing since sliced bread, and is THE secret sauce that makes Reason Amps stand out from the rest.

Cons: No effects loop, which would be handy for placing reverb and other modulation effects after the amplified signal. Just a nit.

Price: $2395

Specs:
• Output: 25 watts RMS @ 5% THD
• 1 X 12 Eminence Red Coat Driver
• (2) 6V6 output tubes, in Class AB Fixed Biased configuration
• (4) 12ax7 preamp tubes
• GZ34 Rectifier tube
• 3 way Stack switch – Normal, Stack, Bright
• Normal channel – Volume, Treble, Middle, Bass
• Bright channel – Volume, Tone
• StackMode™ – Bright & Normal channel controls are active, Stack Volume & Hi-Cut
• Oversized extra capacity power supply
• Power Switch
• Standby Switch
• Independent output jacks for 4,8, 16-Ohm operation
• Footswitch access to all three channels/modes

When I discovered the Reason Amplifier company a few weeks ago, I was so intrigued by what they had to offer that I immediately contacted them. I had the fortune of getting in touch with Anthony Bonadio, one of the founders of Reason to talk to him about his exciting new company and his new line of amps. That conversation led to him sending me an SM25 25 Watt combo to review; and since I’ve had it, I haven’t gotten much sleep from playing with it late into the night. Now you might say that I’m just excited about playing a new amp. Yes, that certainly has a lot to do with it. But what Reason has come up with in their amplifiers is so incredibly brilliant and unique that I’ve been spending all my free time trying to discover the subtle intricacies of this tone machine. There’s a lot to talk about, so let’s get started!

“Dahr-ling, you look mahvelous!”

The Reason founders, Anthony Bonadio and Obeid Kahn, are both vintage gear freak-o-maniacs, and the retro styling of the entire Reason amp line is a testament to that passion. The SM25 sports a black tolex cabinet with light brown trim around the grille cloth, and a thick leather handle with what appears to be brass accoutrements. Between the control surface and grill cloth is a prominent tolex-covered cross board sporting the Reason logo which, by the way, is very cool, very retro as well. The control board looks like burnished brass with black, bold lettering for labels. And to add to that retro vibe, chicken head knobs are used for all the controls. This amp, and all Reason amps for that matter, just ooze vintage mojo. Just looking at the amp, I can’t help but grin that grin you get when you see something so far-out COOL!

It’a hard to discern the actual size of the amp from just a picture. So make no mistake about its size: This is not a diminutive 25 Watt amp. In fact, it’s about as big as a Fender Twin, though not as deep. The shipping weight said 32 pounds, but from feel and comparison to my Fender Hot Rod, it weighs almost as much. But that’s not a bad thing. A beefy cabinet creates a lot of resonance if done correctly, and believe me, it’s done correctly with this amp.

How It Sounds

All Reason amps, including the SM25 are voiced bright. You don’t get beefy lows out of this, and that’s by design. Now before you dismiss that, on stage and in the studio, that bright voicing will ensure your guitar cuts through the mix. I recently played it at one of my regular gigs, and where my amp oftentimes gets lost in the mix, forcing me to pump up my volume, I had no problem cutting through, and mind you, I barely had to push my volume. The bright voicing let my guitar tone sit in the mids and highs. My sound guy even commented on how well he could hear my guitar without me pushing the volume like I usually do during a solo break; though admittedly, like any lead guitarist, I usually don’t mind being louder than everyone else. 🙂

In the studio, using the amp for recording is like being in heaven. The bright voicing combined with the rich tones the amp produces is simply candy for the ears. From a practical perspective, brightly voiced amps also record much better. For home recording I’ve had to stop using my big amp because it’s just too boomy, no matter how I set the EQ. I’ve had to use smaller, brighter amps because they cut through a mix much better. But since I’ve had the SM25, I’ve recorded two songs with it, and like I said, I’m in heaven. I now have a bright voice to cut through the mix, but rich tones as well. It’s the best of both worlds!

The SM25 is also incredibly touch-sensitive and responsive to the subtlest manipulations I made on my guitar. In fact, when I first started playing with it, I was a bit embarrassed by how I sounded. For my all my tests, I played along to some jam tracks I’ve produced for practicing different styles, and recorded what I played through the amp. When I played back what I had recorded, I was appalled at how crappy I sounded! All my mistakes came through! I couldn’t hide whatever bad habits or bad technique I had behind effects, like I normally would. In short, this amp has forced me to play better because it’s so unforgiving when you make a mistake. But hey! It’s never a bad thing to be shown your weaknesses. That’s how you grow and improve!

Multiple channels, lots of tone shaping possibilities…

The SM25 comes with two channels: Normal and Bright. But it also sports a third “channel” called StackModeTM that’s essentially the Normal and Bright channels run in a series with an extra gain stage, while retaining volume and tonal control over the Normal and Bright channels. To me, StackMode is Reason’s secret sauce, but I’ll get into that in a bit. I’ll first describe the independent channels.

The Normal channel sports a volume knob and a three-band EQ. The volume knob is also a push-pull knob, and pulling it out adds some extra high-freq boost to bring out the super high frequencies. The effect is that once you set up your EQ, pulling out the knob adds some extra high-freq shimmer and sparkle. It’s subtle, but absolutely delicious. Comparatively speaking, the Normal channel sounds like your classic, jangly American clean tone, but with the high-freq boost, you get a bit of the sharpness of the British clean – nice.

The Bright channel is well, bright. It too has a push-pull volume knob for extra high-freq boost, and it has a single tone knob to back off some of the brightness. The Bright channel is also the more “ballsy” of the two, and really kicks in some pretty high gain. It’s quite lovely, in my opinion, and it’s perfect for doing the traditional solo break that will cut right through a mix with ease.

Channels? We don’t need no stickin’ channels!

But for me, the real attraction of this amp, and actually any amp from Reason for that matter, is StackModeTM. In all my years of playing, I’ve never come across anything quite like it. On the surface, you might think this is just another channel on a multichannel amp. It is in a way, because of its independent gain stage. But that’s about as close a comparison that you can make to other multichannel amps. Unlike other multichannel amps where all the channels are independent, StackModeTM input doesn’t come directly from the guitar. The guitar’s signal is routed through the Normal and Bright channels first, then fed into the StackMode channel. And the volume and EQ settings on the Normal and Bright channels are still active!

Because volume and EQ are retained in the Normal and Bright channels in StackModeTM, the tone shaping possiblities are incredible. What you adjust in Normal or Bright affects the final output. You can crank up the volumes on the first two channels and achieve uber gain, with thick, rich distortion. Or you can dial it back a bit and take a more balanced approach. The point is that you can do a lot of tone shaping to your needs while in StackModeTM. And here’s the kicker: The amp still retains its touch and guitar volume sensitivity in StackModeTM.

What does this mean? Well, I soon discovered that StackModeTM was the only channel I’d probably ever use, unless I had to go super clean, whereas I’d just switch to the Normal channel. The amp in StackModeTM is so responsive to picking attack and volume knob levels that I found I just didn’t need to do any channel switching at all once I dialed in my settings for the Normal and Bright channels. It’s that good!

One other thing, the volume knob on the StackModeTM channel is a very good Master volume. When I’m playing late at night, I can turn the volume down on the StackModeTM channel, and still retain the characteristics of the settings I made in the first two channels. It’s just softer. How cool is that? So that’s why entitled this section, “Channels? We don’t need no stinkin’ channels.” Once you have your settings dialed into StackModeTM, you’ll never want to get out of it! So for me, the SM25 is effectively a single channel amp with adjustable stages.

My Tests

In any case, for my tests, I used four different guitars: A Strat, a PRS SE Soapbar II with P-90’s, an Epiphone Korina Explorer and a Saint Guitars Benchmark, both with humbuckers. I’ll talk about how each guitar sounds separately below.

Fender Strat

Obeid Kahn is known in the industry as a “Strat man,” and this amp really sounds great with a Strat. I’ve got the vintage re-issue Tex Mex pickups in mine, and slathering on reverb, you can get some awesome Dick Dale-like tones. But it doesn’t necessarily sound like a Fender amp. In fact, the clean tone is like a cross between a Fender and a Marshall. It’s creamy smooth, but bright and sparkly at the same time. The big cabinet adds to the resonance, and the ever so slight voltage sag that you get from the rectifier adds to the sustain and resonance. This is boon when you’re playing with a Strat because they do not sustain well at all. I could get country twang to hard-driving distortion with uber sustain with my Strat.

PRS SE Soapbar II

P-90’s are hot pickups by nature, and it doesn’t take much to push any amp into overdrive, and when it does this, it’s a preamp overdrive lover’s wet dream! With the SM25, the 12AX7’s just sing with sweet, smooth overdrive goodness. There’s nothing harsh about the sound this produces in the SM25, but one thing I did notice with the tone was that unlike other amps I’ve played with my SE Soapbar II, even though the amp is bright, the sound the amp produces with it is big and bold, without being boomy. It’s crystal clear, and doesn’t wash out the higher notes in a barre chord, which often happens with more boomy amps. All in all, I just dug that halfway between single coils and humbucker sound my P-90’s produced with the SM25.

Epiphone Korina Explorer

This is a real rock guitar, with a warm ballsy tone. Plugged into the SM25, I was amazed at how the amp responded to this guitar, and I was able to spew out some thick distortion and singing sustain with the volume knobs on the amp dimed to the hilt. I’m not a metal player, and technically, with the bright voicing of the Reason amps one wouldn’t think they’d be suitable for metal, but the lewd, rude, and crude drive I could produce with the Explorer plugged into the SM25 was scary! But in a good way. And when I scooped the EQ, yikes!

Saint Guitars Benchmark

Of all the guitars I used for testing the SM25, the amp seemed to love the Benchmark the most. This guitar was spec’d with Blues and Classic Rock in mind, and through the SM25, I’ve never heard it sing like this. I could go from deep, dreamy clean to rabid dog distortion, and the whole time, the SM25 maintained a tonal clarity and character; never muddying or washing out. It was other-worldly, to say the least.

Made for the Road and the Studio

Anthony Bonadio cautioned me during a previous conversation that he didn’t want to alienate people from buying the amps when he said, “Our amps are really intended for the gigging and session musician.” In other words, Reason amps aren’t really meant for the bedroom musician. These amps want to move air, and that’s no exception with the SM25. In fact, when cranked, it’s a hell of a lot louder than my 40 Watt Fender Hot Rod Deluxe, and that’s a loud amp! It just wants to project its voice. Premier Guitar even gave its bigger brother, the SM50, its “Loud as Hell” award. But in my opinion, the real test of an amp is how good it sounds throughout its entire range of volume. That’s a mark of versatility, and in spite of what Anthony claims is the focus of Reason’s line of amps, you actually can play these amps at bedroom levels and still produce kick-ass tone!

A lot of amps don’t sound good unless they’re cranked, but at lower volumes they just peter out and lose their character. But at least with my experience with the SM25, it sounds great at ANY volume. Considering that all Reason amps are built around the exact same circuitry, I can safely say that this probably applies to the entire line. So don’t be fooled by the “loud as hell” moniker. These amps are incredibly versatile amps that are comfortable be played in lots of different venues under a variety of conditions.

My Overall Take

I think you can guess that I just love the SM25. For a musician like me who plays small to medium venues, and whose studio is located in a carpeted garage, this amp is a dream come true. It’s expressive with all my guitars, and it’s so versatile that I can use it wherever I play.

As I shared with Anthony recently, StackModeTM is it for me. It’s the secret sauce that sets Reason amplifiers apart from the competition! For more information, go to the Reason Amps web site. And if your local dealer has some in stock, I encourage you to go there and play around with one. You will not be disappointed; in fact, you’ll be blown away!

Read Full Post »

I love getting those intense spurts of creativity when I’m using awesome equipment. I just happened to have a couple of review pieces on hand: A Saint Guitars Benchmark and a Reason SM25 combo amp. This song started out as a simple riff this morning, and grew from there. It’s called Lookin’ for the Good Life. Let me know that you think.

The song showcases the incredible tones the Benchmark and SM25 make together. Just love it!

Read Full Post »

Reason Amplifiers

This is a continuation and expansion of the original new gear article I wrote previously

Riddle me this…

So what do you get when you cross a veteran cabinet maker with an electrical engineering guru? Right. A new amp manufacturer. But the two guys I’m talking about, Anthony Bonadio and Obeid Kahn, didn’t just want to create another boutique amp outfit; they had to have a “reason” to create yet another amp manufacturing company; and after putting their heads together they did come up with a “reason.” It’s called Reason amps!

I recently had the privilege to speak with Anthony Bonadio at length about his new company, and I’m incredibly impressed with the vision behind Reason amps. As Anthony put it, their new amp had to be different: Not just a re-expression of existing designs, but something truly different; otherwise there wouldn’t be a reason to build one (get it?). And at first blush, it certainly appears that they’ve realized their desire to be different. But in order to be different, you have to know what you can do against the existing paradigms, and both Anthony’s and Obeid’s pedigrees as amp cab manufacturer and electrical engineer respectively have given them a certain industry perspective that have allowed them to produce an amp that does indeed push beyond the current paradigms.

So what’s so different about Reason amps? You might look at the amp and say, “This is just another flavor of a vintage-voiced two channel amp.” And if all you used were the Normal and Bright channels independently, you’d be mostly correct. In fact, both Obeid and Anthony are vintage gear freaks, and wanted to produce a vintage-voiced amp – but take it elsewhere… And it’s the third mode of operation that makes this amp really stand out. It’s something Obeid coined “StackMode.” Make no mistake, StackMode isn’t just adding a gain stage to an amp. It’s actually running the two amp channels in series.

“So what,” you might say, “That sounds like a bunch of marketing mumbo-jumbo. There are lots of multi-channel amps on the market.” Not like this. In almost all multi-channel amps, the signal handling for each channel is performed independently. Channel switching is pretty much an internal A/B box. Some amps will have independent EQ on each channel, though most have a “Master” EQ that controls the EQ for all the channels.

StackMode is different – and more importantly, it hasn’t been done before (at least not that I know of).

With StackMode engaged, the fully amplified signal from the first channel flows into the next channel in a series, so what you do to the input gain, EQ and output from the first channel directly affects the signal of the second stage; hence the term, “StackMode.” So in reality, this is not just a different take on an existing pattern. It’s taking an existing pattern and creating a completely new application out of it.

In light of this, I asked myself, why hasn’t this been done before? It seems so simple in concept. But in reality, it’s not easy at all because of the power management issues that arise from essentially re-amping a previously amplified signal that has already gone through a gain stage. With the Reason amps, it’s all about the engineering behind managing the voltage and current, and that’s where Obeid Kahn’s engineering genius has come into play.

So to re-answer the original question that I started the article with: What do you get when you cross a veteran cabinet maker with an electrical engineering guru? You get a new amp that completely breaks the mold of existing amp designs. To say I’m excited about this doesn’t even begin to scratch the surface of what I’m feeling.

The Amps

Reason amps come in two tonal flavors depending upon the power tubes you choose, either EL34- or EL84-based. From the EL34 side Reason offers the SM50 head, SM25 head, SM25 combo for 50 and 25 Watt ouput respectively. On the EL84 side, there are the SM40 head and SM20 combo, with 40 and 20 Watts of output respectively. And of course, they 4X12, 2X12, and 1X12 speaker cabs for the heads as well. No matter what amp you choose, all come with StackMode, so all you have to decide upon is your tonal and power requirements!

Amazingly enough, prices are “Reason-able” considering the engineering that has gone into the amps and compared to other boutique amp manufacturers. Here’s a quick list:

EL34

SM50 Head – $2295
SM25 Head – $2195
SM25 Combo – $2395

EL84

SM40 Head – $2195
SM20 Combo – $2295

Cabs

412 Cab – $995
212 Cab – $595
112 Cab – $395

So why are the prices for the different amps so close together? Simply because the circuitry is the same for each amp. The only significant difference between the amps is in the power handling for each amp, and according to Anthony, that doesn’t impact the production cost in any significant way.

Hybrid Construction

A lot of purists scoff at the idea that any PCB board is used in the construction of a vintage-style amp. But Reason actually uses a combination of turret boards and PCB boards to handle specific tasks for optimal performance. For instance, all signal handling (read: the tone producing stuff) is done with point-to-point wiring on turret boards, while all the switching is done on PCB boards to ensure fast response and reliability. All boards employed are high-grade, 1/8” thick, so even the PCB boards have ample traces to ensure great current flow. So the idea is to use the best and most appropriate components for a particular job. That’s just plain intelligent engineering.

Made by players for players

A lot of companies claim this, but with Obeid’s and Anthony’s collective experience as performing musicians, they really had the gigging and session guitarist in mind when building their amps. For instance, the amps are voiced bright by design, as brighter amps will be able to cut through a mix a lot easier. They also record a lot better. Case in point, even though I love my Fender Hot Rod Deluxe, I have to admit that it doesn’t record very well because of its naturally expansive output that makes it sound a bit muddy in a mix. It works great on stage, especially in the low volume venues I play. But in the studio, I tend to use smaller amps that have a real mid- to high-freq voicing because the guitars just sound so much better through them. But with a brightly voiced amp like a Reason, I wouldn’t have to rely so much on tiny, less “ballsy” amps.

One thing I do have to mention is that the volume knob on all Reason amps is a push-pull knob. When you pull it out, you get a high-freq EQ boost, to get more high-end freqs that’ll add extra sparkle and shimmer to your output. This is great for recording!

All that said, Anthony did stress that he didn’t want to alienate any players who didn’t happen to be gigging or session musicians; it’s just that those kinds of guitarists would definitely find an immediate advantage of using a Reason amp because of how it’s voiced.

My Take Overall

Yeah, yeah, I’m excited about yet another thing – if you read this blog with any regularity, when am I not? But really, it’s not too often that new gear totally blows me away. To me, the concept behind StackMode is a staggering achievement. As an engineer myself (though in software), I have a genuine appreciation for new and innovative solutions to different problems, and StackMode is something that really tickles the geek in me. Granted, I’ve only heard sound bites, but I’m soon going to be demoing the SM25 in the near future, and I just know I won’t be disappointed!

Check out the whole story at the Reason Amps web site. It’s awesome.

Read Full Post »

Reason SM25 Combo Amp

Reason SM25 Combo Amp

Need a tube amp? Now you have a Reason. Sorry, couldn’t resist the pun. All right, I know what you’re thinking, “Another amp manufacturer?” That’s what I thought at first until I saw some video clips (I’ll get to those in a sec). But on the flip side of that mild complaint, thank the universe that people have the creativity to come up with different approaches to existing paradigms.

I found out about Reason amps from none other than Mr. Phil Vickman of Fat Tone Guitars just outside of Chicago, Illinois. Being a fellow blog freak, I found Phil’s Fat Tone Blog awhile ago, and signed up for his newsletter. Much to my surprise, his latest newsletter featured an upcoming in-store demo from the guys at Reason Amps on November 12 at 5-7pm. Go to Fat Tone Guitars for address information, or give ’em a call at: 866/512-8663.

So, being curious, I checked out the Reason Amps web site, checked out their sound bites, and much to my surprise, they didn’t have a dealer list, and they didn’t even list MSRP’s for their amps! So, I gave Phil a call, and we had a nice chat. Apparently, Reason Amps is NEW. So new, that not too many people have heard of them. But I have a feeling that their amps are soon going to get some traction.

So what makes Reason amplifiers so special?

Whether you go low wattage or up to their 50W amps, they all come with three modes: Normal, Bright, and Stack. It’s actually two channels, with the third mode being a blend of the two channels that Reason calls “Stackmode.” Stackmode uses a “cascade series connection that sets up the circuit architecture to blend the independent gain stages” of the two channels.

The net result? Yikes! Tones that you wouldn’t expect to find from an amp that is essentially a vintage-style amp. But don’t take my word for it. Check out the YouTube demo:

You can also view all their videos here by clicking here.

Granted, YouTube audio is not the most desirable audio to be heard, but if the amps sound that good over YouTube, you gotta believe they’re going to sound outstanding live. So check out the Reason web site!

A Little Plug for Fat Tone Guitars

Phil Vickman has a nice little business going with Fat Tone Guitars. I go to the Fat Tone site to get on my drool factor for the wonderful gear he sells. Amazingly enough, there’s not a Fender guitar listed on his site, though he does carry Gibson. But make no mistake, Fat Tone sells high-end gear from several boutique guitar makers like Baker, St. Blues, and Ram. From my recent conversation with Phil, he likes unique approaches to guitars. For instance, Ram guitars make Tele-style guitars made from pine! Wow! We spoke at length about Saint Guitars and how Adam Hernandez likes using different kinds of woods like walnut or bloodwood. That’s cool and unique. Adam told me he spoke to Phil, and will be sending him a couple of demo guitars. That’s so awesome! Way to go Adam, and way to go Phil! You won’t be disappointed!

Read Full Post »

« Newer Posts