Feeds:
Posts
Comments

Archive for the ‘aracom amps’ Category

David vs. Goliath: The Aracom PRX150-Pro Fells the Ultimate Attenuator

Posted in amplifiers, amps, Amps/Amplification, aracom amps, attenuator, buying gear, GAS, gear, gear reviews, guitarists, Guitars, invention, Music, musicians, new gear, PRX150-Pro, tagged , , , , , , , , , , , , , , , , , , , , on August 24, 2009| 3 Comments »

Ladies and Gentlemen! Welcome to the bout of the century! A truly momentous occasion in the vein of David versus Goliath! In the red corner we have a Goliath, the reigning King of Attenuators, the Ultimate Attenuator; self-proclaimed King of Transparency – Guaranteed! In the blue corner is the Aracom Power Rox PRX150-Pro, a virtual David, armed with only a transparency sling ! And here’s the opening bell!

The Ultimate Attenuator strikes first, tongue lolling, with bombastic claims of pure transparency. The agile Power Rox ducks, and moves away, its sling of true transparency whirring rapidly. Wait! It launches! It strikes the Ultimate Attenuator square in the head. It’s going down! Oh the humanity! Oh the humanity! The match was over before it was even begun!

I had the great opportunity this evening of testing the Aracom Power Rox and the Ultimate Attenuator in a head-to-head shootout to determine which was the most transparent attenuator. As you can tell from the somewhat facetious and fictitious pseudo-boxing match, you know who won: The Aracom Power Rox PRX150-Pro. Folks, it wasn’t even a contest. Even at the lowest attenuation levels, the Power Rox swept the floor with the Ultimate Attenuator!

My Test Procedures

Equipment: My test was conducted using a Replica JTM45 equipped with original Mustard Caps and a pair of  KT-66’s, into a 4 X 12 cabinet equipped with (2) Original 55Hz Greenbacks and (2) Custom Weber (75Hz) Greenbacks, with a ‘Gibson 57 Les Paul Historic Goldtop as my test guitar.

Clean Test

First, I started with the amp totally clean. I strummed a simple chord progression to get my base tone. Setting the Ultimate Attenuator at about half “volume,” I activated it. I immediately noticed a distinct loss in both highs and lows, as even at minimal attenuation, the bandwidth of my tone was severely narrowed. The full bottom-end and sparkly top-end of my clean tone were significantly reduced. The tone wasn’t that bad, mind you, but it certainly lacked the richness of my base tone – it sounded flat.

One thing that really bugged me was activating the UA, which required a strumming the guitar, then switching on the UA, as if the UA needed a signal to pass through it to even start working. What a pain! It’s amazing that users would even tolerate this.

I repeated the same test with the Power Rox, setting it at half attenuation on the 6-way switch. The result was a reduced volume, but no loss of bottom- or top-end at all.

Clean Test – Bedroom Mode

Same test as above with both attenuators. With the Ultimate Attenuator, can you say “tone sucker?” The tone was not at all pleasing! Even more narrow bandwidth, and non-existent dynamics. There was nothing even remotely good to like at this level with the UA. How the UA website can claim to be “the most transparent and safest tube amplifier attenuator on the market in the world. Guaranteed” is beyond me. Even my old Dr. Z Airbrake sounded better than the UA. So again, at this level, the Power Rox just kicked ass. Lower volume, but full retention of bandwidth and dynamics.

Dirty Tests

In my dirty tests, I ran the amp in its drive channel cranked up fully. 40 Watts through a 4 X 12 is LOUD!!! Especially when you’re standing right in front of the cab! Actually there’s nothing like feeling the SPL’s with an amp full-out! I ran the same tests as I did with the clean channel with both attenuators, and as expected got the same results: The Ultimate Attenuator really sucked my tone, while the PRX150-Pro retained tone and dynamics at all levels. The Plexi switch just made the tone even worse, acting like a treble booster, which made an already horrid tone even worse by just upping the highs. The tone was akin to an old transistor radio played at the volume of a loud TV. Not pleasing at all, and actually, it was a bit annoying, like cats screeching! YUCK!

The Power Rox, on the other hand, again just reduced the volume. The tone remained rich and full, and all the overtones and harmonics came through. It’s amazing what those subtleties do for your tone. You really miss them when they’re not there, as they provide depth.

It’s evident that the Power Rox’s Speaker Reactance Thru technology is far superior at any application. For me, the Ultimate Attenuator company can make all the claims it wants about transparency, but that’s all they are: claims. And while it doesn’t sound all that bad at low attenuation levels, the marked difference in tone between the UA and Power Rox at any attenuation level relegates the UA – at least to me – to the junk heap. You couldn’t get me to put this in my rig if you paid me.

I realize that the UA was the best game in town for quite awhile, and I am sure that at the time it came out, it outperformed the THD HotPlate, which I have also tested, and didn’t like. I also realize that I’m being fairly harsh – much more harsh than I’ve ever been with a product – but all the claims of the UA being truly transparent are mere exaggerations, and not backed up by any discussion of its technology. In fact, all the hyperbole surrounding the UA is quite irritating!

If you knew what went into a UA, you’d have serious concerns, not the least of which is the 32 ohm fixed resistor, which essentially flattens out your impedance, and creates a mismatch so high that you could fry your amp! Adding insult to injury, the solid-state amplifier is what is really running your speaker. Transparent? Hell no! Not electronically, and definitely not audibly.

And mind you, I’m not the only person who feels this way. One new PRX150-Pro user, who is also a former UA user was so impressed with the Power Rox and disgusted by the UA’s tone compared to the Power Rox, that he bought two Power Rox’s! That says quite a bit.

For more information about the Aracom Power Rox PRX150-Pro, visit the Aracom Amps PRX150-Pro product page!

Read Full Post »

Gear Review: Aracom Amps Power Rox PRX150-Pro Attenuator

Posted in amplifiers, amps, Amps/Amplification, announcements, aracom amps, attenuator, buying gear, GAS, gear, gear announcements, gear reviews, guitar, guitar gear, Guitars, Music, musicians, new gear, PRX150-Pro, tagged , , , , , , , , , , , , , , , , , , , , , , , , on August 18, 2009| 10 Comments »

5 Tone Bones - Gear has stellar performance, value, and quality. This is definitely top of the class, best of breed, and it's a no-brainer to add this to your gear lineup!
Aracom Amps PRX150-Pro Attenuator		 Aracom Power Rox PRX150-Pro Attenuator

Summary: This is hands-down the best attenuator on the market! I’ve played a lot of attenuators, and no other has been able to retain tone and dynamics at high attenuation levels as the Power Rox!

Pros: The Power Rox isn’t just an attenuator. It packs extra features that’ll just blow you away, making a it versatile part of your stage or studio rig!

Cons: None.

Features:

  • Rotary Switch provides (6) Step Attenuation Levels, plus
    the Variable Mode allows continuous variable control of “bedroom” level adjustment
  • 33dB attenuation range
    * Attenuates 100 watts down to well under 1 watt (0.05 watt).
  • 150 watt (continuous average) power rating
  • Independent Input Impedance Switch: 2, 4, 8, 16 ohm
  • Independent Output Impedance Switch: 2, 4, 8, 16 ohm
    * Uniquely allows mismatched amplifier and speaker impedances to be used.
  • Attenuator Bypass Switch
  • Load Mode
  • Line Out with Level Control
  • 2 Speaker Jacks (wired in parallel)
  • Passive design, does not require AC power
  • Rugged, black anodized aluminum housing
  • Heavy duty, steel reinforced handle
  • Handwired and Handcrafted in the USA.

Price: $649 direct

Tone Bone Score: 5.0. Jeff Aragaki of Aracom Amps never ceases to amaze me with the stuff he comes up with! This time, it’s an attenuator invention that blows away the competition in safety and tone and dynamics with its patent-pending Speaker Reactance Thru (SRT) technology, plus extra features that make it unmatched in versatility and usability.

I’ll admit it: As much of gear nut that I am, I’m also a huge techno-geek. I dig new technologies and the engineering behind them; and when someone comes up with some new approach to something, with completely awesome engineering, it’s hard to control my GAS. I just have to have it.

I recently took delivery of a brand new attenuator invented by Jeff Aragaki of Aracom Amps, called the Power Rox PRX150-Pro. This, by far, is the best attenuator I have ever used, and will be a fixture in my rig for years to come. That’s right. This will always be in my chain. But not just because of its ability to transparently attenuate an amp signal. This attenuator has features that no other attenuator has such as two speaker outs, and a Line Out that you can use to go direct into a DAW, or even another amp! Talk about versatility. Not only that, because you can match impedance in both the input AND the output, combined with Jeff’s patent-pending Speaker Reactance Thru (SRT) technology, you can squelch down the power of your amp and not worry about ever blowing our your tubes and ruining your amp. The SRT technology just kicks ass!

Talking the Talk AND Walking the Walk: Speaker Reactance Thru Technology

Jeff is a very humble man, so he’d never say anything like this, but I’m not nearly as humble, so I will say it: There’s not a better attenuator than the PRX150-Pro. Even if Jeff didn’t include all the extra features you get with the Power Rox, this attenuator simply kicks the shit out of all the attenuators I’ve ever tried – and I’ve tested several, including the Ultimate Attenuator that seems to be the most popular attenuator; and with respect to safety, tone and dynamics, all others simply pale by comparison.

Where other manufacturers make bold claims (read: brag) about their attenuators’ transparency, not only can Jeff Aragaki make the claim (in his quiet and humble way), he backs it up with detailed discussions of his SRT technology and the engineering behind it and what makes it so transparent. Jeff’s SRT technology is absolutely incredible. At any level of attenuation, the Power Rox retains your tone and dynamics. This is because instead of just dealing with amp power reduction through a series of resistors or a dummy load, which also have the added effect of flattening out the impedance curve and changing tone, the SRT technology ensures that reactance between the amp is maintained throughout the entire spectrum of attenuation; hence, the name “Speaker Reactance Thru.” This means that the impedance curve is kept intact so that the continuity of reactance between the speaker and the amp are maintained. Jeff discusses this in a detailed article about the advantages of the PRX150-Pro.

Let’s talk a bit about safety…

As I mentioned, the PRX150-Pro will not burn out your amp. You can crank your amp up all the way, getting that wonderful power tube drive, and not worry about your amp blowing a tube, or worse yet, frying some circuits from flyback voltage. We’ve all heard the horror stories about people using attenuators, cranking their amps, and blowing power tubes. A lot of this has to do with impedance mismatching. Some manufacturers have added options to match impedance from one direction, but the Power Rox has impedance matching in both the input and output jacks! But the point of this is that with impedance matching on both sides, you don’t have to deal with any type of mismatch. That is very comforting to know.

I’ve actually been playing with the Power Rox for the last couple of months regularly before it hit the shelves, and to date, I haven’t had any power tube problems. And we’re talking running my amps down to less than a watt for a few hours straight. I could never do that even with my Dr. Z, which is one of the more safe products out there. I’ve burned out power tubes using my Dr. Z by cranking power too much. It’s not pretty, and I’ve been lucky so far that only my tubes got burned out. It could’ve been a lot worse.

This ain’t yer Daddy’s Buick…

When Jeff first spoke to me about the Power Rox, I thought, “Okay, it’s another attenuator. I’m sure it’ll be great considering what a whiz Jeff is…” But when he delivered the unit, I couldn’t believe what he had added! I was already impressed that it had both input and output impedance matching. That was simply awesome. But he added some awesome features that I was not at all prepared for:

  • Bypass Switch – This is a mechanical bypass that completely bypasses the attenuation circuit.
  • Line Out – This one thing is just so cool! I used it to go both direct into my DAW, and also used it to re-amp into my Hot Rod Deluxe! Talk about versatility! For a test, I ran a cable to my 1 X 12 cab, then ran another cable to my Hot Rod. I could’ve easily just run direct into my Hot Rod without going out to another speaker as well, but you can see how useful this is. I could get my amp’s tone and combine it with the Hot Rod’s tone. So cool!
  • Two Speaker Outs – This is yet another cool thing. You have multiple cabs that you want to drive with a single amp? This makes it easy.
  • Input AND Output Impedance Matching – No other attenuator matches impedance in both input and output, but the Power Rox has it. It’s all part of the package to ensure continuous reactance between the amp and the speaker.

So as you can see, the added features make this oh so much more than just an attenuator, and it’s a testament to Jeff’s creativity!

The proof is in the pudding…

Unfortunately, doing sound clips of an attenuator’s effect is fruitless, because it is difficult to hear the changes, and moreover, it is difficult to describe the change in dynamics on a recording. However, the Power Rox was tested side-by-side to a number of popular attenuators, and even at low levels of attenuation, compared to Power Rox, all the other attenuators had an effect on tone and dynamics. To date, several people have performed head-to-head comparisons between different attenuators and the Power Rox, and they all come to the same conclusion: The Power Rox is truly transparent; not just the most transparent of the lot, but truly transparent. To me, this box sets the standard by which all others must be measured now.

I used my own transparency test procedure to compare attenuators, but Jeff has also provided a very detailed, and in-depth transparency test that you can view on his site.

I know, I must sound like a twitterpated schoolgirl with how I’m raving about this product, but for the very first time, I’ve been able to record my amps fully cranked without pissing off my family and neighbors, and more importantly, without having to worry that I’m going to blow a tube. Even with my Dr. Z, I’ve had to settle with less drive on my recordings for fear of burning out my amps. But with the Power Rox, I can crank my amps and get that wonderful power tube drive! And even better yet: I can trust that my tone and dynamics will not change, no matter the volume!

For more information on the Power Rox PRX150-Pro attenuator, go the Power Rox Product Page!

Read Full Post »

There’s a New Sheriff In Town: The Power Rox PRX150-Pro Attenuator

Posted in amplifiers, amps, Amps/Amplification, announcements, aracom amps, attenuator, buying gear, GAS, gear, gear announcements, gear reviews, guitar, guitar gear, guitarists, Guitars, Music, musicians, new gear, PRX150-Pro, tagged , , , , , , , , , , , , , , , , , , , , on August 15, 2009| 1 Comment »

PRX-front-543You ever have an itch you can’t scratch? Well, it has been like that keeping my mouth shut about the Power Rox PRX150-Pro. Ever since I played with the early prototypes, I’ve been completely blown away by this attenuator! This is a totally new take on attenuator technology, folks, and I’m hoping it takes the industry by storm. Why? Simply because what we’re talking about with the Power Rox is true transparency in tone when this is in your signal chain; not “almost” transparent, but truly transparent.

Check out the Power Rox PRX150-Pro page at Aracom Amps!

Most comparisons between attenuators revolve around what’s the “most transparent” attenuator, indicating that really none of them are transparent, so people pick the best of the lot. And frankly, I’ve tested out several attenuators and ended up with the Dr. Z Airbrake, as I felt it was the most transparent out of the ones I tested. But nothing could have prepared me for the transparency of the Power Rox.

I could go on and on, but I won’t. In fact, I had already written a significant amount of text, but decided to just point you in the right direction. Go to the product page. Read through the product description, but more importantly, read the supplementary documentation behind the links at the bottom of the page. Jeff Aragaki has graciously provided some very in-depth articles on how attenuators work, and also provides a high-level explanation of the technology behind the PRX150-Pro.

Other manufacturers may brag about the safety and transparency of their attenuators, but none is willing to back up their claims with the engineering behind their attenuators (and if you knew what some were doing, believe me, if you care about your tone and the safety of your amp, you’d get worried). If you’re interested in or even use an attenuator, you owe it to yourself – and your tone – to check this unit out!

Read Full Post »

Adventures in Groovin’ on my Strat

Posted in amplifiers, aracom amps, booster, Creation Audio Labs, GarageBand, GAS, gear, guitar, guitarists, Guitars, Hardwire, inspiration, Mk.4.23, Music, musicians, new song, tagged , , , , , , , , , , , , , on July 17, 2009| 3 Comments »

Fender 60th Diamond Anniversary Stratocaster

I’m normally very methodical in my approach to writing music. But sometimes, I just get carried away with playing that I’ll just create a riff, and jam over it again and again until my fingertips are numb. Writing my latest instrumental was exactly that experience. I came up with a riff, added some bass and a basic drum kit loop to it, and spent the next several hours trying to cop my best SRV. 🙂 Believe me, no one can play like that dude! He was special.

But the point of this is that after hours and hours of playing, I really got inspired to not just let it be a jam track, especially after I came up with a phrase that felt like it could define the theme of a song. So over the next few days I tweaked with the song, and this is the final result. Note that I had a version of this up as of a couple of days ago, but I remixed it, added an echo part for the last section, and removed a bunch of layered on effects from the first cut. I ended up with a much more raw sound, which was really what I was after. Here it is:

All the guitar parts were played with “Pearl” my 60th Diamond Anniversary Strat. After playing ‘buckers for awhile, I forgot how fun it was to play my Strat! My amp, of course, was my ever versatile tone machine, my Aracom Amps VRX22. For effects, I used a Hardwire RV-7 Reverb, a Creation Audio Labs Mk.4.23 booster, and a Voodoo Lab MicroVibe.

Read Full Post »

Gettin’ In the Vibe…

Posted in 6V6, amplifiers, amps, aracom amps, guitar, guitar gear, guitar picks, guitarists, Guitars, Music, musicians, new song, picks, plectrum, Red Bear Trading, V-Picks, VRX22, tagged , , , , , , , , , , , , , , , on July 14, 2009| 5 Comments »

I was noodling around the other day, and came up with a riff. The riff turned into a jam track, then the jam track turned into a full song. I’m still working on the song, but thought I’d post it for folks to give it a listen. Here it is:

Here’s what I used:

  • Rhythm Part: Clean Strat in Neck/Middle position. My Aracom VRX22 in the Clean channel, with the Master cranked and volume at halfway. Used a Red Bear Trading Tuff-Tone pick to get that percussive sound out of the chords.
  • Part 1 Solo: Strat in Neck Position into my MicroVibe and the same amp settings. Also, used the Tuff-Tone pick to get a more percussive attack to the notes.
  • Part 2 Solo: Strat in Bridge Position into MicroVibe. Amp was set on Channel 2 with the Master dimed and volume at 6 for some nice, but not over-the-top breakup. I love that 6V6 breakup! Here I used my V-Picks Psycho to smoothen out the attack and give the bright bridge pickup a bit of extra oomph.
  • Part 3 Solo: Strat in Neck position, nixed the Vibe, into the clean channel with Master and Volume fully dimed. Used the Psycho here as well, but used a percussive attack.

In order to get those kind of high power settings from the amp, I used a soon-to-be-released Aracom attenuator that’s like NOTHING I’ve played through before! This thing is completely transparent because it maintains reactance between the amp and speaker; something that a lot of attenuators have a problem with (please don’t get me started on the UA, which I think is the biggest bunch of hype I’ve ever run across as far as attenuators go).

Another word about the VRX22. When the Master is fully open, and the power tubes are getting lots of juice, this amp just oozes all sorts of tone. And as the rectifier circuit kicks in, this amp feels as if it has built in reverb! As you can tell, I love this amp! Check it out at: http://www.aracom-amps.com.

I know that you might think I’m a bit nutso for using different picks; obviously in a live situation I’d probably only use one. But the in the studio where I can do pretty much anything I want, using different picks to affect my tone is totally cool. Check out Tuff-Tone picks at http://www.redbeartrading.com and the Psycho pick at http://www.v-picks.com. I swear by these two brands, and while I don’t work for either of these companies, like the Aracom Amps, they’ll always be part of my “rig.”

Read Full Post »

Fun With Re-Amping

Posted in amplifiers, amps, Amps/Amplification, aracom amps, fender, GAS, gear, guitar, guitar gear, guitarists, Guitars, Music, musicians, new gear, prestige guitars, VRX22, tagged , , , , , , , , , , , , , , , on June 27, 2009| 1 Comment »

My friend Jeff Aragaki, of Aracom Amps is an incredible inventor. Today he brought over a new unit that among other things, allows me to re-amp my amplified signal into another amp. I’ve heard of this being done before – it’s not new. I just never had the means to do it until today. The clip I recorded – and excuse me for the sometimes sloppy areas – is my Prestige Heritage Elite plugged into my Aracom VRX22 into Jeff’s new invention, then out to my little 1 X 12 cabinet and re-amped through my Fender Hot Rod Deluxe. Re-amping through the Hot Rod allowed me to take advantage of its reverb, but with two amps going at the same time, it totally fattened up my sound without making it murky. Freakin’ incredible. Anyway, give it a listen!

Read Full Post »

Abunai 2: Follow-up

Posted in aracom amps, effect pedals, Effects, GAS, gear, gear reviews, guitar, guitar effects, guitar gear, guitar pedals, guitarists, Guitars, Music, musicians, new gear, overdrive, pedals, tagged , , , , , , , , , , , , , , , , , , on May 24, 2009| 1 Comment »

Tone Freak Effects Abunai 2I’ve been playing my Prestige Heritage Elite so much lately that I forgot how fun it was to get funky with my Strat. So this morning, I plugged my Strat into my board, switched on the Abunai 2, and found a sweet spot that would give me just a bit of grind when I played single notes with nice grit when I dug in or played chords. Then I started playing this little funky riff that I just laid down.

I just can’t get over how good this pedal sounds with any guitar! With my Strat, I’ve always tended to play it much more clean than my other guitars. The ’57 Tex Mex pickups – at least to my ears – have never sounded very good with overdrive. I’ve always felt the drive was harsh. But the Abunai 2 really smoothens out the drive, and now I’m diggin’ playing with some real grit on my Strat.

By the way, if you missed the first clip I recorded using my Heritage Elite, here it is below:

My Aracom VRX22 just loves this pedal as well. Some might argue that with such a great amp that has a fantastic overdriven sound that I should be using the natural overdrive of the amp. In answer to that, sometimes I want a completely different overdrive character than what my amp has to offer, and an overdrive pedal through the clean channel of an amp has a totally different character than the drive channel.

Also, in a home studio environment where I have to keep the volume down, an overdrive pedal allows me to get some snarling-dog overdrive without having to crank my amp. And with a pedal like the Abunai 2 that simulates voltage sag and tube compression so well, I can get that cranked amp tone at bedroom levels!

Anyway, I hope you enjoy the clips!

For more information on the Abunai 2, and for other Tone Freak Effects pedals, please visit the Tone Freak Effects web site!

Read Full Post »

Gettin’ In the Zone

Posted in amplifiers, amps, aracom amps, guitar, guitarists, Guitars, improvisation, inspiration, Music, musicians, performing, playing live, tagged , , , , , , , , , , , , , , on May 14, 2009| 1 Comment »

Steve Ray Vaughn
Ahhh… the venerable SRV in a classic guitarists pose. I used to think that was just something rock stars did for publicity shots, and that the poses were contrived. But then as I’ve delved more and more deeply into improvisation, I’ve realized it’s not contrived at all. That kind of pose or expression is all part of what can be called “gettin’ in the zone.” The Zen masters call the “the zone” the state of satori, where thought and action are one; where your consciousness is at a height where whatever enters your mind you do. From the perspective of playing guitar, the awareness of what your body is actually doing is lost. Your focus is entirely on expressing the music you’re playing.

For instance, have you ever been playing one day and just get into the groove of a song, close your eyes, and just let your fingers do the talking? You’re completely aware of the song, but that’s pretty much all you’re aware of; and when you play, it’s pure expression. I had recently had this experience. I was playing on top of a simple chord progression in D, and the song came to a part where I had a rather long lead break. A few years ago, I would’ve been terrified to do play such a long solo, but I’ve really started to get comfortable with my playing to handle something like this. Luckily for me, it was not a fast song. 🙂 But in any case, after the first few bars, I got into this groove where I didn’t worry about technique nor worry about how I was playing a phrase. I just played. It was pure expression.

After the gig, a few people came up to me and said that when I was playing, I had this look of pure rapture on my face. I replied, “Really? I thought I was just playing. Gawd, I hope I didn’t look like a poser weenie…” One of the folks was a guitarist and told me that it was genuine. He said, “Dude, you were in your own world.” I just chuckled because I was totally unaware of my posture or body language. I was completely focused on playing. I was really in the zone.

I think a lot of my latest inspiration is that I now have gear that gives me the tone that I’ve been after for awhile, and while I realize that 90% of your tone comes from your hands, having gear that facilitates your playing just adds to your inspiration. For me, I’m playing what I believe to be the absolutely perfect amp in my Aracom VRX22. The cleans are absolutely spectacular on any guitar I play with it, and that clean channel is the most pedal-friendly channel I’ve ever played. The drive channel on that just sings and sustains beautifully. I know, I know… I rave about this amp a lot, but I’ve searched high and low for an amp like this, and now that I’ve found it, it’s like I’ve died and gone to heaven!

I’d be interested in hearing your “in the zone” experiences. Feel free to share ’em!

Read Full Post »

Aracom VRX22 and Aracom 1 X 12 Mini Cab

Posted in amplifiers, amps, Amps/Amplification, aracom amps, buying gear, GAS, gear, gear reviews, guitar, guitar gear, guitar reviews, guitarists, Guitars, Music, musicians, new gear, VRX22, tagged , , , , , , , , , , , , , , , , , , , , , , on May 9, 2009| Leave a Comment »

 

Aracom Amps VRX22 - First in the series

Aracom Amps VRX22 and Aracom 1 X 12 Mini-cab

I know, I know… I’ve been singing the praises of this amp and cab for the last couple of months since I got them. But folks, what Jeff Aragaki of Aracom Amps has put together in the VRX22 is simply magic. I just can’t say enough about how much I love this amp. It doesn’t matter what guitar I plug into it, the VRX22 delivers the goods.

A New Option for the VRX22

I have the standard production model, the first in the series. In its stock mode, I wouldn’t change a thing. But I know there are some vintage gear and tube amp buffs out there that would frown upon the fact that the VRX series in stock configuration has a solid state rectifier. For me, it makes not a bit of difference; I just love the tone.

But for those that require a tube rectifier, Jeff also offers an option of a GZ34 or 5AR4 tube rectifier in place of the solid state rectifier. An A/B test didn’t reveal a tonal difference, but for the purists out there (and by no means do I mean this derisively), this is certainly an option, and a reason why you should consider this amp in your amp evaluations. And here’s another consideration: All Aracom Amps are hand-wired, and cost FAR LESS than equivalent amps. For instance, the VRX line in stock configuration costs $895! That’s unheard of in the boutique market!

Have a Cab, Will Travel

But on top of all that, the 1 X 12 mini-cab that Jeff custom built for me is simply magical as well. Jeff went against the common wisdom of not using a cube shape and porting and such, and built a simple cube shape with a width that exactly matches the width of the amp (about 19″ wide). Amazingly, this cabinet is incredibly resonant. The reason for this is that instead of using 3/4″ board, Jeff opted with 1/2″ board. This resonates a lot more with the speaker, and provides a bass response that adds depth to the output. Granted, I also have an absolutely kick-ass Jensen P12N Alnico speaker, but that cabinet even sounds good with just about any speaker you put in it. Like I said, amazing.

To further demonstrate the versatility of the VRX22 and the Aracom 1 X 12 mini-cab, I recorded a short blues clip using three different guitars, all running straight into the VRX22 with no effects. There are to overlapping rhythm parts panned left and right, and a solo in the middle. For the left pan, I used my gorgeous Prestige Heritage Elite (“Sugar”) plugged into the VRX22. For the right pan, I used my Strat (“Pearl”) plugged into my Fender Champ 600 and ran the speaker out into the 1 X 12 (I didn’t think the Champ could sound this good wow!). For the lead, I used “Sharkie,” my PRS SE II Soapbar with P-90’s in the bridge position straight into the VRX22.

Sorry for the slight mistake in the solo; or as my buddy Phil calls it, a “clam.” But overall, I was just amazed how good Sharkie sounded on that clip. I added a touch of reverb to that track, but made no modifications to the guitar signal at all. It was the guitar plugged straight into the amp.

As I’ve said in the past, I’m not affiliated at all with Aracom. I’m just a faithful customer, and just can’t sing the praises enough for the job Jeff has done!

For more information, visit the Aracom Amps web site!

Read Full Post »

Caveat Emptor: Don’t Fall Prey to Pedigree

Posted in amplifiers, amps, Amps/Amplification, aracom amps, buying gear, GAS, gear, guitar, guitarists, Guitars, Music, musicians, performing, playing live, prestige guitars, Strat, tagged , , , , , , , , , , , , , , , , , on April 28, 2009| 2 Comments »

I admit it: I’m an incurable GEAR SLUT! I jones for vintage and vintage style gear, as the music I play leans toward the blues and classic rock. And to satisfy that never-ending craving, I pore over the Internet and various magazines in search of all sorts of gear; hence, the existence of GuitarGear.org where I share with you, dear reader, the things that I come across.

Now in my search for gear, I occasionally buy things. They tend to be vintage-style modern gear because I just don’t have the money to buy real vintage gear; and that usually means I gravitate towards boutique gear; but not just any boutique gear. Remember, I don’t usually have all that much money to afford the real high-end stuff, so I spend a lot of my scouring my information resources to find boutique gear that I can afford. That’s what gravitated me towards Aracom Amps.

When I saw the price of a VRX series amp, my jaw dropped! Here was a hand-wired, vintage-style tube amp for $895!!! When I finally hooked up with Jeff Aragaki (founder of Aracom), and got a chance to play the VRX18, he shared that one of the ways he was able to keep the cost down was by using a solid-state sag simulating rectifier circuit. When I heard the words “solid-state,” the purist in me started reeling a bit. But then that amp sounded so freakin’ good that I didn’t give a flying you-know-what about the rectifier!

And that’s the point of this article. When you’re looking for and buying gear, don’t let yourself be swayed by an instrument’s or equipment’s pedigree or “all-tubeness” or lack thereof. LISTEN to the fuckin’ thing, and see if it turns you on! If it sounds good, and it works for YOU, then that’s all that matters, in my not so humble opinion on the subject. 🙂 If I had let the purist in me take over, I would’ve never ended up with my VRX22! And for the record, I’ve listened to many, many, many amps, with and without tube rectifiers, and the circuit that Jeff Aragaki employs in the VRX series simulates the sag of a rectifier tube so well, I can’t tell the difference. And if there is one, it’s probably so minute that it doesn’t matter anyway. I’ll put that amp up against any other boutique amp in the same wattage range, and it’ll sound just as good, if not better. And I paid less than half the price of a similarly configured amp!

Give the following clip a listen. I’m playing my Strat plugged straight into the clean channel of the VRX22. In some sections you could swear that the amp has a reverb, but that’s the solid-state rectifier simulating the sag of a tube rectifier. Also, this is the raw recording of the amp: No EQ, no filtering. The master volume was flat out, with the gain control around midway. My mic was about about 10″ away pointed directly at the center of the speaker cone.

I originally recorded that clip with my Prestige Heritage Elite. But that guitar has so much inherent sustain, it would’ve been cheating. 🙂 A Strat on the other hand doesn’t have that much sustain, so it brings out the sustaining quality of the amp much better. The result is just amazing.

And as to the tube vs. solid state rectifier issue, at least in the Aracom VRX series, it doesn’t make one whit of difference, especially when you’re playing live at gig levels. When I’m gigging, I almost never use reverb unless it’s a song where I can really isolate my guitar. Sag gives the effect of reverb, but at loud gig levels, you’ll never hear it.

Another great example of buying what sounds good to you is my friend Vinni Smith of V-Picks. That dude is one of the best guitarists I’ve ever known, and he gigs all the time! You know what he plays through? A freakin’ Roland Cube 30 cranked all the way up and miked into the PA. When he told me that, I almost flipped. Here was a true pro guitarist,  playing through a $200 amp!

So don’t be taken in by pedigree. Buy what sounds good to you, and what you can make sound good. After all, 90% of your tone is in your hands.

Read Full Post »

« Newer Posts - Older Posts »