Visit any online forum and you’ll see countless topics in the form of, “How can I get this sound?” or “Tell me what I need to sound just like ______________.” These are quite popular threads as people will chime in with their knowledge; however complete or incomplete, with the gear that a particular guitarist used. The discussions sometimes get quite lively as some personalities collide in an ego-fed frenzy. Okay, I’m exaggerating… 🙂 But they do get quite lively. I read through those threads both for pure amusement, but also to get educated about others’ approaches to achieving a particular kind of tone. It’s amazing the gear that I’ve discovered just because of these kinds of threads.
One of the most amusing topics I’ve run across in the recent past is people asking how they can sound like The Edge from U2. Let’s face it: The Edge’s rig has got to be one of the most complex arrangements of gear around. No one really knows what his complete signal chain is except his techs who set all his gear up, yet so many people chime in (albeit in an effort to assist, and that’s a great thing) with their suggestions. Unfortunately, all they can really produce is a fraction of the picture, and considering The Edge’s rig, probably a minute fraction at best. For instance, I once read he runs something like a 40 foot cable between some devices so there is a built-in lag. Damn!
Mind you, I’m not trying to put anyone down, but to me, discussions about how to faithfully, flawlessly reproduce a particular tone is almost futile; and as much I hate to rain on anyone’s parade, and as much as someone would like to produce a tone exactly as they’ve heard, they may get close – real close – but they’ll never get there 100%. Why? Because there are lots of factors that contribute to tone; not the least of which is the guitarist who originally created the tone in the first place! On top of that, you’d have to have the same guitar, with the same strings, with the same amp, with the same pedals (if applicable), the same pick; not to mention the exact same cables that were used. Then you’d have to try to produce live what was a recorded sound, and you can bet that guitar signal went through quite a bit of audio processing to produce the recorded tone. Get the picture?
Like I said, I’m not trying to rain on anyone’s parade, and perhaps these questions asked on the boards are purely out of curiosity, but I’m of the mind that if you truly aspire to be a great musician, let alone a great guitarist, you need to find the tone that pleases you. You may end up sounding similar to someone, but I think the best guitarists out there – no matter what their technical level is – are the ones that sound like themselves.
Ever since I started this blog back in 2007, I’m always tickled by how I sometimes just stumble upon gear manufacturers. With Tone Freak Effects, I happened to do a search on “tone freaks” to see if there were any interesting site out there. I found Red Bear Trading picks at a local guitar shop, and bought a couple after trying them out as I was curious what a $20 pick would play like (it was wonderful, of course). In other cases like Saint Guitar Company, a visitor to GuitarGear.org happened to mention that he had just got one in a comment. I at first thought the comment was spam, but decided to do some research. I’m glad I did because I’m going to soon take delivery of my first custom Saint Guitar Company Goldtop Messenger!
A couple of days ago, I was viewing a video of Tonic Amps, and noticed a guitar that I had never seen before (click on the video link, and you’ll see it at about 1:50). It was gorgeous! Birdeye maple top, solid maple body and neck from a company I had never heard of before called Sweetwood Guitar Company. Of course, The Dawg rarely passes up the opportunity to sniff out new gear to activate his GAS, so I did a search and found the Sweetwood Guitars site. These are VERY NICE guitars! Very simple and straight-forward in their design, with a real vintage vibe going on.
Not wanting to stop at just looking at pictures, I went to the contact page, and was blown away! Sweetwood Guitars is local to me! In fact, they’re only about 15 minutes away from my house! Shit! I’m in trouble! 🙂 But it’s a good trouble!
Anyway, I gave Glenn, Sweetwood Guitars’ owner and luthier a call, and will soon be doing a test run on a couple of his guitars. When I called him, he was on the road traveling back up to the Silicon Valley from LA, where he has the finishes done, and he was bring back a bunch of guitars! I can’t wait to hook up with him and try out these beauties!
I love living in the Silicon Valley. While it might not be considered a “destination” for music and culture like San Francisco, New York, Nashville, and Saint Louis, it is a destination for technology, and for decades has led the world in many of the technological advancements we enjoy today. Having lived in the Silicon Valley all my life, and watching it transform from a largely agrarian economy to the mecca of high-tech and venture capital, one thing has remained the same: The Silicon Valley has a certain magic about it that inspires innovation and invention.
So it is no surprise that there are several boutique amp manufacturers in the area. I’ve written about a couple in the past, namely Aracom Amps and King Amplification, but recently, I hooked up with Tonic Amps, located in Mountain View; less than 10 minutes from my home!
Darin Ellingson contacted me last week, and invited me to come to his shop. While I knew he built amps, what I didn’t know until I did a bit of research is that Darin is Fane International’s North American distributor for Fane speakers! That got me really interested in Tonic – especially Darin’s cabs. Over the years, I’ve heard so much about Fane speakers, but have never had the chance to hear how they sound. And what great fortune that the North American distributor is 10 minutes away from my house!
In a nutshell, I played through three types of Fanes in 2 X 12 and 4 X 14 cabs: Studio 12L, AXA12, and Medusa 150. Plus, I got a sneak peak at some prototype Fanes Darin is having specially made. Through Tonic cabs, the Fanes sound drop-dead gorgeous! I hooked up three different amps to various Tonic Amps: A Reason Bambino, Aracom VRX18 (tube rectified), and a Tonic Torpedo. No matter what amp I played through, the Fanes sounded crisp, articulate and incredibly dynamic. Folks, this is the way to evaluate speakers. Frequency response charts are useful, but until you’ve got the speakers loaded into a cab, you will never know how they truly perform. Tonic cabinets are absolutely top-notch, and if you’re in the market for a great cabinet, you can’t go wrong with these. They’re all solid wood (no pressboard here), and the dimensions Darin has specified really bring out the best character of the Fane speakers.
What was my favorite? It’s a toss-up between the Medusa 150 and Darin’s prototype that he will hopefully bring into production soon. I love the scooped tones of the Medusa and the mid-ranginess of the prototype. Hmmm… can you say 2 X 12 cab with these in it? HAHAHAHAHAHA!!! Dammit! Gave myself GAS again! It’s probably a good thing I can’t afford them right now – I will have to save my pennies. The speakers and cabinets don’t come cheap, but for this tonal quality, it’s worth every penny. You wouldn’t put a great speaker in a cheap cabinet… maybe… No, I won’t even get into that debate… 🙂
Torpedoes Away
Based upon the classic Trainwreck circuitry, the Torpedo is a pedal lover’s wet dream! I played the 50 Watt version, which is powered by a pair of EL-34’s! Folks, we’re talking clean headroom with this amp, with minimal breakup at the top end of the volume sweep. The tone is thick and rich and very well-balanced. I didn’t notice an overabundance in any part of the EQ range… well… it did have just the slightest amount of midrange, but that’s good though, because this amp’s tone will play nicely in a mix.
At any volume level, the amp sounds great, but its true character comes out when you dime the volume and play it through a 4 X 12 cabinet. Throw a couple of pedals in front of it (we used the British Ball Breaker and a prototype GeekDriver/GeekRanger pedal in front of the amp), and the amp’s tone combined with the 4 X 12 will knock you across the fuckin’ room! Can you say wicked overdrive that makes the hairs on the back of your neck stand up? It was amazing to witness!!!
The “Torpedo” moniker is totally appropriate for this amp. It is meant to fire out a shot of gorgeous tone, blow you out of the water, and knock you into tone heaven! Even at the volumes we were playing at, this tone isn’t a face-peeling raucous. Granted, a lot of that quality had to do with the Fane speakers we were playing through, but just as with you not putting great speakers in a shitty cabinet well, you don’t play a great amp with shitty speakers either.
If you live in the Silicon Valley, I encourage you to contact Darin and check out his workshop. It’s set up for jamming, so bring an axe or two! Darin’s even got beer! Though next time I go to his shop, I’ll bring a 12 pack. BTW, he like Tecate. 🙂 For more information, check out the Tonic Amps web site! To get a reference for how great Tonic Amps sound, check out Darin’s YouTube site at: http://www.youtube.com/user/MrTonicAmps.
I had such a great evening tonight! Darin from Tonic Amps invited me over to his shop to try some amps through his excellent speaker cabinets (be on the lookout for a review in the next day or so). He has a very cool workshop that he also shares with “GeekMacDaddy,” who makes some absolutely KICK-ASS pedals! I got to try out a few of them tonight, and absolutely fell in love with the British Ball Breaker, which GeekMacDaddy touts as a classic Marshall Plexi in a box. He’s not kidding, either. This is a helluva pedal, with rich, thick, overdriven Marshall tone. Just set your amp on clean, crank the master volume, engage the British Ball Breaker, and you’ll be rewarded with gorgeous Marshall-esque overdrive!!! YOWEE!!!
You gotta check out these pedals! They just rock! In addition, GeekMacDaddy is just about to release another freakin’ fantastic pedal called the GeekDriver that is a totally awesome take on a drive pedal. It sounds awesome by itself, but this pedal was built to be stacked, providing the foundation tone, then driving another fuzz or overdrive pedal. Rockin’!!!
Damn! Two freakin’ awesome pedals that I will have to get – as if I need more! But hey! You know me and overdrive pedals! I just can’t get enough of them!
Here’s a great demo video of both the British Ball Breaker and the GeekDriver from PremierGuitar:
Notice that GeekMacDaddy’s playing through a Tonic Amp! Those amps just rock as well! However, I’m getting ahead of myself!
Effectrode has long been known for its tube-driven effects such as the Tube Vibe. But they’ve just released a new overdrive pedal with three tubes that give you up to six gain stages of drive! OMG! Talk about saturation city! Note that this pedal ain’t cheap at $399, but if it delivers on what appears to be very promising features, I might be hard-pressed not to take a serious look at this pedal. It’ll be interesting what people say about this pedal.
Here’s the description of from the Effectrode site:
The Tube Drive, pure class-A tube overdrive pedal featuring three triode vacuum tubes for a total of six gain stages. The drive knob simultaneously controls the gain of all cascaded stages so that they progressively clip allowing the Tube Drive to respond empathically to your pick attack with a graceful breakup characteristic. At lower gain settings this pedal excels at producing authentic blues and mild break-up to add some “dirt” to playing whilst always sounding smooth and musical. Pushing the drive a little higher produces the classic 70’s overdriven tube amp tone and at even higher gains the sound becomes rich in harmonic content without masking the the natural sound of your guitar and amplifier. The Tube Drive allows you to effortlessly climb the gain curve to create sustaining, super-saturated lead tones, inspire you and power your solos beyond escape velocity, through the stratocastersphere soaring into high energy orbit!
Features
All Tube gain circuitry: 100% analog, class-A, clipping circuitry based on three cascaded tubes. No silicon in the signal path – guaranteed. This topology gives the Tube Drive fine control over a wide range of gain characteristics from mild breakup to creamy saturation.
Bax-Stack “active” tube tone control: The Tube Drive is the only overdrive with an active tube tone control. The Bax-Stack is a real treble boost (and cut) circuit with zero insertion loss, unlike passive tone stacks which can only remove frequency content (“tone-sucking”). The tone range is optimized to work over important frequencies essential for mellow jazz tones to some serious crunch.
Low-end coutour switch: Active low boost for a warmer, richer sound. Especially useful with single coil pickups to thicken the sound or when playing at low volumes to compensate for loudness.
Orange L.E.D.: Indicates when pedal is engaged.
Very cool! But even cooler are the sound samples. Check ’em out!!!
335 solo
Strat Solo
YYZ solo
Crunch
Saturation
Mild Breakup
Strat Drive
Crunch Too!
Red Barchetta
Sustain
Description and sound clips courtesy of Effectrode Pedals.
As you know, the Dawg spends a lot of time sniffing around to find gear, but sometimes, manufacturers find me. Recently Tonic Amps contacted me, and I checked out their offerings. Tonic builds some nice reissue amps with their own twists, but they are also the North American distributor for Fane Speakers, the noted UK amp speaker manufacturer.
As you’d expect, if they sell speakers, Tonic probably builds cabs as well, and that is definitely the case. Darin (owner/builder of Tonic), has some very nice custom cabs in a variety of configurations and woods, all solid board cabinets: no pressed sawdust here, my friends. Tonic also offers custom cabs in a variety of hardwoods (though of course, you’re going to pay a premium for these, but hey! they’re available).
In any case, Premier Guitar has run a couple of videos that demonstrate Tonic Amps. You can check them out below:
From the 2009 New York Amp Show:
From the LA Amp Show:
These are some nice-sounding amps with some nice features! One thing that’s totally awesome for me is that Tonic Amps is literally ten minutes away from where I live! I can’t wait to try out Tonic’s amps and cabs!
Another cool thing is that Darin shares a shop with GeekMacDaddy, who makes a line of very cool pedals. Maybe I’ll get a chance to give ’em a whirl, in particular, his British Ball Breaker, which is touted as a Marshal stack-in-a-box. Yummy!
I was perusing The Gear Page this morning, and saw one of Anthony’s postings of the colors the Bambino comes in. CHECK IT OUT!!!
I have the blue tolex model shown at the bottom right. It is SO cool looking.
BTW, if you missed the sound clips, here they are again:
Clean fingerstyle in neck position of my Strat:
Clean, blues progression, with Strat in neck/middle position with just a minute amount of breakup:
All out, wide open with channels 1 and 2 dimed and StackMode volume at 3pm. I’m playing my Prestige Heritage Elite with ‘buckers in the bridge position:
This little amp has created quite a buzz on the forums, and at $699, it’s a deal. It has been so popular, that they haven’t been able to keep up with the demand, and that’s a good thing! To place an order or to get some information, contact the guys directly at info@reasonamps.com.
Did my weekly church gig this evening and took the Reason Bambino along. Didn’t bring a pedalboard; just a 1 X 12 cabinet and a couple of cables. I wanted to test out the amp in its pristine state, with no added accoutrements. I also wanted to test the balanced line out to see how it worked with the building’s PA.
I have to tell you, Obeid Kahn being a noted Strat guy, even though the Bambino sounds killer with a guitar with ‘buckers, this amp seems to just love a Strat. It really makes it come alive. Whether I played fingerstyle or funky, the Bambino really made my Strat sing. Well… nothing helps to inspire me to play better than great tone. Like I mentioned in my review, the tone of the 6AQ5 sits right between an EL-84 and a 6V6, and that tone seemed to bring out the best of my Strat. The cleans were classic Strat, and the drive, oh yeah, the overdrive was open and bright, and just floated in the air. I may have been in worship, but I was also in tone heaven!!!
As for the balanced line out, oh man! The tone coming through my church’s PA was great! We have a pretty nice PA system, and the tone, whether clean or dirty, didn’t sound any different than what was coming through my cab. That was a concern for me because I’ve played through amps with line outs that just didn’t sound like the amp. The Bambino’s line out is very transparent, and that’s especially important with this amp because it’ll give you plenty of volume to monitor your tone on stage, but the line out going into your PA will ensure that it’ll get out faithfully to the audience. Make no mistake. This amp may only have 8 Watts, but it has plenty of volume to be used as a stage amp. I suppose it’s another way to approach performance. Especially in a church setting where lower stage volume is critical, having the ability to keep your stage volume down but knowing that it’ll get out to your audience is just so awesome. The Bambino rocks in this department!
***Quick Update*** I just spoke with Anthony this morning and he nor Obeid didn’t anticipate the DI to be plugged directly into a PA, so he was pleasantly surprised to hear my application of it. Note that I went direct out and into my cab at the same time! This amp has versatility written all over it!
And if ever the 8 watts isn’t enough, the Bambino can be used as a reference amp to define your tone, and with the line out, you can re-amp into another amp or a power amp to boost your output power. I’ve tried this, and it works great. I can’t wait until I get to try this at a real gig!
So what’s the verdict? The Bambino rocks – plain and simple.
To get a Bambino…
I don’t think Anthony and Obeid anticipated the popularity of the Bambino, and the positive response has been enormous. If you’re interested in getting this $699 tone monster, contact the guys directly either through e-mail at info@reasonamps.com. They also hang out at the Gear Page (http://www.thegearpage.net/board). Search for “bambino” or find the users “Reason” or “OKahn” and send a private message. There will probably be a bit of a wait time to get the amp as it has create quite a buzz and they’re already getting orders. The amp is just out of prototype and review for goodness’ sake! It’s amazing!
Reason Amps “Bambino” Summary: Don’t let its diminutive size fool you. This 14lb amp packs tone for days! Capable of sweet cleans to massive overdrive, the Bambino is sure to keep you rockin’!
Pros: Even at 8 Watts, this amp will give you stage volume for small venue gigs. 2 Watt mode gives you the same tone as the 8 Watts, but will keep your family and neighbors happy.
Cons: None.
Features:
Preamp Tubes: Three 12AX7’s
Power Tubes : Two 6AQ5’s in a push-pull configuration.
Output Power: 8 Watts, switchable to 2 Watts
Channels: Normal (Push-pull Fat Boost), Bright (Push-pull Treble Boost), StackModeTM
Built-in Speaker Load Box Simulated Line Output with Level Control
Separate Headphone Output
Price: $699.99
Tone Bone Score: 5.0. The Reason guys did it again! This amp simply rocks the house! Yeah, I know, I’ve only had the amp for a day, but I’ve been playing with it since this morning, and I just had to write about it! It’s spectacular!
Having the gift of gab is not a very good thing when you want to talk about something and can’t. I mentioned in previous posts that I knew about this amp when it was in the planning stages months ago, but Anthony Bonadio asked me not to mention it until it was ready. So imagine wanting to blab about this new amp, and not being able to! Oh well… At least I know I can keep a secret! 🙂
A little history…
When I first talked to Anthony about the amp (it didn’t even have a name yet), he mentioned that it was going to be a 1-Watt bedroom/practice amp for under $700. But Obeid Kahn (Reason’s genius amp designer) being who he is, thought the better of it and decided to create a voltage-switchable amp that could be used in and out of the bedroom. I’m glad he decided to go that route, because even with my very short experience with the Bambino, it has versatility written all over it. Don’t let the 8 Watts fool you at all. 8 Watts is plenty for stage volume in small venues and churches. Keep in mind 1 Watt at 3 meters through a 1 X 12 is as loud as a jackhammer!
When Anthony mentioned they were ready to launch the Bambino, I got real excited, and was even more excited to be able to get a test unit to evaluate. As I mentioned in my previous post about the Bambino, I just got it yesterday, but haven’t been able to keep myself from playing it today. I’ve probably logged about 8 hours on the amp between late last night and today.
Fit and Finish
What can I say? Reason Amps are freakin’ gorgeous. There are no voids in the tolex and the cabinet is quite sturdy. The control panel is easy to manipulate and very easy to figure out. Hell! There are only seven knobs! The test unit I got sported navy blue levant tolex, just like my Aracom amps! Lined up together, it looked like a color-coordinated set! HA! The beige front panel really creates a nice contrast to the blue tolex. The Bambino just looks great. But, of course, it’s following the pedigree of its bigger siblings.
How It Sounds
As I mentioned in my first impressions article, tonally, the Bambino, with its 6AQ5 power tubes, sits right between the EL-84 and the 6V6. Its cleans aren’t as glassy as the EL-84, and not as fat as 6V6. It truly does reside in the middle. Overdrive is more like a 6V6, with an open and airy quality that retains note clarity, even at high-gain settings. I’ve heard mention that the Bambino sounds like a couple of different amps, but from my perspective, the 6AQ5 has a voice all its own.
The Normal channel is the clean channel, and it’s actually tough to get breakup on this channel until you get the volume past 2pm. I love playing a Strat through this channel. You get that classic Strat tone, but expressed completely differently by virtue of the power tubes.
The Bright channel is actually not that much brighter than the Normal channel, though it does have that treble booster to get more top-end sparkle, and instead of a single tone knob, you have treble and bass knobs, so you can tweak the voicing a bit more. In this respect, the Bambino’s channels are set up very similarly to Reason’s SM40, where the two channels are fairly similar in tone.
StackMode, which combines the two channels in series and adds an extra gain stage is just simply to die for! The StackMode volume acts as PPIMV, so you can absolutely crank the first two channels and not blow out your ears. But when you have the ability to really open up the amp in StackMode, very very cool things happen with respect to overtones and high-order harmonics. The amp really comes alive when you’re running a lot of juice through the tubes!
Here are some clips I recorded of the Bambino (all were recorded in 8-Watt mode):
Clean fingerstyle in neck position of my Strat:
Clean, blues progression, with Strat in neck/middle position with just a minute amount of breakup:
All out, wide open with channels 1 and 2 dimed and StackMode volume at 3pm. I’m playing my Prestige Heritage Elite with ‘buckers in the bridge position:
OMFG! I love that last clip. The harmonics are incredible, and as you can tell from the clip, even though the overdrive is absolutely snarling and the gain is way over-the-top, the clarity of the notes is just amazing! Obeid had mentioned that good things start to happen when I could play the amp all out, and based upon my experience, he was right on the money. This amp just sings when you can let it breathe!
Sorry, I don’t have anything in between clean and in your face overdrive – I’ll record some more later.
Re-amp Anyone?
I also tested the balanced line out with the Bambino, running it into my Aracom VRX18, then into a 1 X 12 cabinet. Talk about a great, bright tone. The VRX18 “inherited” the grind from the Bambino, then added its own voice! The result was incredible. In fact the VRX18 helped to smooth out the highs from the Bambino. I’ll see if I can record some clips with that. But in any case, it really demonstrated the possibilities of how you can use this amp!
Overall Impressions
The Tone Bone score of 5 says it all. This is a great amp, period, and I will soon be adding it to my growing collection of low-power amps. Yeah, it’s a low-power amp that may not work for medium to large venues, but for small venues and for recording, this amp is spectacular. And at a street price of $699, it’s definitely a great value proposition to boot!
Okay, I want one… How do I get a Bambino? It’s not even listed on their site yet!
Contact the guys directly either through e-mail at info@reasonamps.com. They also hang out at the Gear Page (http://www.thegearpage.net/board). Search for “bambino” or find the users “Reason” or “OKahn” and send a private message. There will probably be a bit of a wait time to get the amp as it has create quite a buzz and they’re already getting orders. The amp is just out of prototype and review for goodness’ sake! It’s amazing!
Visit any online forum and you’ll see countless topics in the form of, “How can I get this sound?” or “Tell me what I need to sound just like ______________.” These are quite popular threads as people will chime in with their knowledge; however complete or incomplete, with the gear that a particular guitarist used. The discussions sometimes get quite lively as some personalities collide in an ego-fed frenzy. Okay, I’m exaggerating… 🙂 But they do get quite lively. I read through those threads both for pure amusement, but also to get educated about others’ approaches to achieving a particular kind of tone. It’s amazing the gear that I’ve discovered just because of these kinds of threads.
Ever since I started this blog back in 2007, I’m always tickled by how I sometimes just stumble upon gear manufacturers. With 
Guitar Gear 