What three word phrase begins with an “O” and ends with an exclamation mark (!)? You guessed it, OH MY GOD! That was my reaction when I first turned on the Reason Bambino I got for review today. For the unfamiliar, the Bambino is Reason’s brand-new entry into the sub-10 Watt amp market, and if this little monster doesn’t make a big splash, I’ll be very disappointed!
I won’t go in-depth into the features since I covered those in my recent pre-release announcement, but the Bambino is simply a miniaturized version of the Reason family of amps, sporting three modes: Normal, Bright, and Stack. Stack Mode ROCKS folks, as it runs the Normal and Bright channels in series, adds an extra gain stage, while retaining full EQ control over the individual channels. Can you say, “High Gain?” 🙂 The volume knob on Channel 1 is a push-pull fat booster, while the volume knob on Channel 2 is a treble booster to add top-end sparkle. And of course, the Bambino is powered by two 6AQ5 power tubes. But enough of the features…
I opened up the shipping box and pulled out the amp to find a Navy Blue Levant tolex-covered amp. I just smiled as that is the exact color of my Aracom Amps! Talk about matching a set (though I don’t get to keep this eval model)! I’ve been so excited to get this amp as I’ve known about it for months, and couldn’t say a word about it. So despite the fact that I just finished a 4-hour solo gig tonight, how could I not open it up and try it out!
So I checked the tubes to see if they got unseated during shipping (they were fine), hooked it up, plugged in my Strat, and being that it was 10:30pm, switched the amp to 1 Watt mode (it’s switchable between 7 Watts and 1 Watt). I put the amp in Stack Mode, cranked the two channel volumes, turned the amp on, and got the Stack Mode volume to a reasonable level; that is, loud enough to move a bit of air but soft enough so as not to wake the neighbors (my studio is in my garage).
I struck an A chord on the fifth fret, and almost jumped out of my shoes! I could not believe what I was hearing! As expected, like all Reason amps, the Bambino is brightly voiced. But the 6AQ5 has a sound all its own. The overdrive tone is sizzling, with a nice, open character, incredible touch-sensitivity and dynamics, but it’s amazingly smooth at the same time. I liken that type of overdrive to the way 6V6’s break up, but the Bambino with its 6AQ5’s has a tone that is wholly unique! I LOVE IT!!! I did a few legato runs, and tested out the sustain and feedback. All I can say is that I was totally blown away! And I got this tone running the amp at bedroom levels in ONE FREAKIN’ WATT MODE!!!
Now, before you go thinking that 1 Watt doesn’t seem like a lot. In amp vernacular, it’s not much at all. But from an audio perspective, a 1 Watt amp running through a 1 X 12 speaker is as loud as a jack-hammer! That’s where the Stack Mode Volume comes into play as it is a PPIMV (Post Phase Inverter Master Volume), which effectively controls the amount of signal going into the power amp. At the volume I was running at, I was probably down to 1/2 or maybe even a 1/4 Watt, and that was at about loud conversation level.
But the gain that I was getting in Stack Mode was plenty for my needs, and as a home studio recording amp, being able to get that kind of tone without needing an attenuator, is incredible! I do have to say, that if I really want to take advantage of the third gain stage, I’d have to run the amp through an attenuator. Even at 1 Watt, with Stack volume cranked, it’s very loud, and that’s a testament to Obeid Kahn’s genius with power management.
As far as cleans are concerned, from what I can perceive with my Strat, the tone sits between an EL-84 and a 6V6 clean tone. It’s not as glassy as an EL-84 clean, and not as rich as a 6V6 clean. But what I like is that the clean tone has a real nice three-dimensional quality about it. There’s nothing flat about the cleans this amp produces. Adding just a touch of reverb accentuates this quality. It’s pure ear candy. While I love high-gain, to me, the real test of the amp is how it sounds clean. From that perspective, the Bambino totally delivers!
It’s almost midnight, I’m incredibly exhausted, but I have to play a little more before I turn in. So, in summary, my first impression of this amp is that it KICKS F-IN ASS! I haven’t even begun to explore all its features like its balanced line out (can’t wait to re-amp this with my Aracom VRX22 or do direct recording). All I know is that this is one special amp, and one that I am definitely adding to my collection! It’s a no-brainer at $699 for a hand-wired, US-made amp. Like the Aracoms amps that I love so dearly, I’ll take this amp over any name brand boutique amp out there!
If I’ve said it once, I’ll say it again. The market cannot have too many overdrive pedals. 🙂 As you know if you read this blog with regularity, I just love ’em. I know… there’s nothing like the sound of a cranked amp, yada-yada-yada… But to get to the type of amp drive that I like; that is, with both pre-amp and power tubes contributing to the distorted sound, the volume levels will make your ears bleed. Enter the overdrive pedal, which gives you that breakup tone at any volume level! And the reason I love OD pedals so much is because I personally haven’t come across any two from different makers that sound exactly alike. Sure, many cop the tone of some original design – can you say Tube Screamer – but even the “clones” have voices all their own as their manufacturers add features or make the original circuits more efficient.
Guitar Gear 