Feeds:
Posts
Comments

Archive for the ‘Music’ Category

Gear Review: The Marshall Class 5 Amplifier

Posted in amplifier reviews, amplifiers, amps, guitar, guitar gear, guitar gear reviews, guitarists, Guitars, Music, musicians, tagged , , , , , , , , , , , , , on September 14, 2010| 8 Comments »

Marshall Class 5 AmplifierSummary: Class A, Plexi goodness in a low wattage amp that packs a punch despite its smaller size.Pros: Great, ballsy tone that’ll just make you smile

Cons: None.

Features (as tested):

  • Power: 5 watts
  • Preamp tubes: 2 x ECC83
  • Power tubes: 1 x EL84
  • Controls: Volume, Treble, Middle, Bass
  • Speaker: 1 x 10″ 16ohm Celestion G10F-15
  • Headphone output
  • Extension speaker output
  • Dimensions: 19.48″ x 16.34″ x 9.05″
  • Weight: 26.46 lbs

Price: < $400 Street

Tone Bone Score: 5.0 ~ Even though I didn’t get to spend as much time as I’d like to play around with the amp, I was simply impressed by the tone that it delivers, and at a price point that makes it very difficult to ignore. While many low wattage amps can sound thin and tinny, the Class 5 with its generously-sized cabinet has a fantastic, rich tone.

On Low Wattage Amps

I love low wattage amps – those that are 10 Watts or less. I have a few. For years, people eschewed these super low wattage amps, and passed them off as mere practice tools. But I suspect they really didn’t understand what a super low wattage amp brings to the party. Low wattage amps such as the 5 Watt Fender Champ helped define the sound of rock and roll. Listen to classic rock tunes, and more likely than not, the venerable Fender Champ would be the amp providing the sound.

Today, more and more people are turning to low wattage amps – especially home recording enthusiasts, and even pros like Jeff Beck – to save their ears and to get crunch and grind at low volume levels. As a result of the increased demand, many manufacturers, boutique and mainstream alike, have responded and come up with a slew of low wattage amps. It’s a good thing and a bad thing. On the one hand, you have tons of selections, on the other hand; well, you have tons of selections. There are a lot of them out there and it’s tough to decide which way to go.

The shear amount of low wattage amps on the market is perhaps a big reason why Marshall waited so long to come out with its super own low wattage amp. Perhaps they were studying what the market responded to and what they could do to address what people might have fed back as improvements that could be made.

Enter the Marshall Class 5 amp. This amp was released in the UK near the middle of last year, and arrived here on our fair shores around November of last year. Amazingly enough, news about this amp has been relatively quiet. There hasn’t been all that much advertising that I’ve seen about this amp. The Marshall Haze amps have gotten lots of “rag” time, and the response to those amps has been generally positive. But I haven’t heard much about this amp other than user reviews. That’s too bad because after playing it, I have to say that I really dig it!

Classic, Killer Tone!

Is Marshall embarrassed about advertising such a low wattage amp? I certainly hope not, because I got a chance to play this amp today, and I just have two words to describe it: KICK ASS! Built upon the “Bluesbreaker”/Plexi pedigree, the Class 5 has all of that Plexi goodness in a low wattage combo. Make no mistake: The Class 5 packs a serious punch; maybe not maximum volume-wise (for a gig, this amp would need to be miked, but will provide plenty of stage volume), but if you’re looking for those classic Plexi tones in a low wattage solution, look no further!

Because I was in a shop, I only tested it with a single guitar: An Epiphone Les Paul Ultra. But the Class 5 delivered that cranked Les Paul through a cranked Marshall Plexi true to form. It was everything I expected to hear from a cranked Plexi, just at a lower volume. That really blew me away!

There’s really something special about that tone. My Aracom PLX18BB is a super-close replica of the Plexi 18, plus my good buddy has several Marshalls including an original JTM45 and Plexi 50, so I’m very familiar with that classic tone. While the Class 5 is just a tad grittier in its overdrive than its more powerful siblings (perhaps due to the new speaker), the rich harmonics and smooth overdrive delivered with “balls” with a gorgeous sustain is all there.

While it might seem from my description that this amp isn’t very loud, it’s plenty loud. You can even gig with it easily, even with the stock 10″ speaker which, by the way, has tons of volume and provides rich tone. I was actually expecting the amp to sound a bit thin due to the smaller speaker, but there was nothing thin-sounding about the amp.

Another reviewer mentioned turning the bass all the way down, because he thought it was flabby. I really didn’t detect a flabbiness to the bass, but I like a bright amp anyway so I had the bass EQ dialed down to about 8pm which is almost off.

All this tonal goodness is delivered by a 10″ speaker specially developed for the Class 5 by Celestion, the G10F-15. As expected, the 10″ really has an emphasis on the mid- to high-frequencies, but Marshall compensated for the lows by providing a spacious cabinet to act as a nice resonance chamber for the speaker. The result is a very balanced and smooth tone, if a little on the bright side. But bright is what Plexi’s are all about, and the Class 5 delivers on that swimmingly!

As far as my customary test clips go, sorry, this was a shop eval, so I didn’t record any. But if and when I get the amp, I’ll post some for sure!

Yikes! It’s Too Loud!

Hello… 5 Watts is loud. In fact the speaker’s SPL is rated at 97dB at 1 meter with a power rating of 15 Watts. People have complained that they can’t crank it up in the bedroom past 3 or 4. Yeah… welcome to the Non-Master-Volume club. But that’s the beauty of the Plexi in the first place! You need to saturate the power tubes as well as the preamp tubes to get that Plexi vibe. If you need to run this amp at bedroom levels, the best solution is to get an attenuator such as the Aracom PRX150-Pro.

I sincerely hope that Marshall doesn’t cave in to those complaining it’s too loud and add a master volume to the amp. To me, it doesn’t need and would take away from its vibe.

Made in the UK

This amp is constructed in the UK, amazingly enough. And what’s even more amazing is that it sells for less than $400! The shop I tested it at had it a retail price of $389! One would expect those kinds of prices to come from gear manufactured in Asia. But not this beauty. So to have a UK-made amp at this price point is truly remarkable! Then to get tone this good? OMG! Truly amazing!!!

Fit and Finish

This amp is extremely well made. The cabinet feels real solid, and nothing was loose. Apparently, earlier versions suffered from a buzz, but the unit I tested didn’t have that at all. In any case, I inspected the amp thoroughly – front and back-  and didn’t detect any finish flaws. The tolex was nicely molded down to the surface of the underlying wood, and there were no loose pieces of material. From what I could tell, 1/2″ ply was used for the cabinet, and that is good because I’ve found, at least from a purely qualitative perspective, that cabs built with 1/2″ thickness tend to resonate quite well. This obviously helps bolster the bottom end, and it does it nicely.

The rear of the cab is interesting in that it is partially closed with about a 4″ opening, covered by a metal grill. I suppose that this is so you don’t throw in the cable and accidentally puncture the speaker cone, but it may be purely aesthetic in nature. The rear grill is rather cool.

Overall Impression

I totally DIG this amp! It was fun cranking it up in the store this afternoon! Admittedly, the amp doesn’t really hit its sweet spot until the volume knob is about midway. But completely cranked up, it produces the tone I expect out of a Plexi! And even cranked up, it responds well to volume knob levels, so you can clean up the amp quite easily.

Compared to other super low wattage amps I’ve played, even my venerable ’58 Champ, this amp has tons of balls in stock configuration. With my Champ, I had to have an amp tech add a 1/4″ jack so I could run it into an external cab because the 8″ speaker really can be quite thin-sounding. But the Class 5 has enough balls and volume stock to not need any of that (though it’ll be fun to run this into an external cab anyway, which I plan to do).

Note that unlike other reviews, I really didn’t make mention of the amp being “Class A.” That’s a big deal with lots of folks, but to me, even though I understand the classification, it really doesn’t matter. What does matter to me is how the amp sounds, and it simply sounds killer. In my book, I couldn’t care less about an amp’s classification so long as I can get great tones out of it; and the Class 5 will certainly deliver on that!

As you might surmise, I’ll probably end up getting this amp. As if I need another! But it’s a great amp at a great price. That’s just plain tough to ignore! And note that this amp sounds so good stock to me that I really don’t see a need to swap out tubes unless they burn out (which they probably will considering I’ll be running the amp all out all the time 🙂 ).

Here are some cool video clips of the Class 5 in action:

Read Full Post »

Gear Review: Sennheiser ew 172 (100 Series) G3 Instrument Wireless System

Posted in GAS, gear, gear reviews, guitar, guitar accessories, guitar gear, guitar gear reviews, guitarists, Guitars, Music, musicians, new gear, wireless guitar, tagged , , , , , , , , , , , , on August 10, 2010| 1 Comment »

Click for larger image

 Sennheiser ew 172 G3 Wireless System

Summary: If you’re looking for a great instrument wireless system that is both easy-to-use and a snap to set up, look no further!

Pros: 1680 available frequencies make this ideal for busy RF venues. Super easy to set up sensitivity levels. Transmitter sports a metal housing, so durability shouldn’t be an issue. Integrated guitar tuner in transmitter – works great! 25Hz low-end response – great for bass!

Cons: None.

Features:

  • Sturdy metal housing (transmitter and receiver)
  • 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
  • Enhanced frequency bank system with up to 12 compatible frequencies
  • High-quality true diversity reception
  • Pilot tone squelch for eliminating RF interference when transmitter is turned off
  • Automatic frequency scan feature searches for available frequencies
  • Enhanced AF frequency range
  • Increased range for audio sensitivity
  • Wireless synchronization of transmitters via infrared interface
  • User-friendly menu operation with more control options
  • Illuminated graphic display (transmitter and receiver)
  • Auto-Lock function avoids accidental changing of settings
  • HDX compander for crystal-clear sound
  • Transmitter feature battery indicatation in 4 steps, also shown on receiver display
  • Programmable Mute function
  • Integrated Equalizer, Soundcheck mode and guitar tuner
  • Contacts for recharging BA 2015 accupack directly in the transmitter
  • Wide range of accessories adapts the system to any requirement

Price: $499 street

Tone Bone Score: 5.0 ~ I waited a LONG TIME to pull the trigger on a wireless system, and while I could’ve gotten a cheaper one that would work well, but it was hard to argue with the frequency coverage of this unit. The added features of a guitar tuner and EQ are great, but the ease of use factor really hit home with me as well.

As I mentioned above, I’ve been holding out a long time to get an instrument wireless system. When I finally pulled the trigger, I decided upon the Sennheiser G3 Wireless system; first and foremost because of the number of frequencies it has on tap, but honestly, also because it’s a name I trust as my performance mics are Sennheiser. I’m not being a cork-sniffer here. I swear by the brand because of the years of great performance I’ve gotten out of other Sennheiser equipment, so it stands to reason to trust it for something completely new.

As it turns out, true to my past experience with Sennheiser gear, there was absolutely nothing to be disappointed about with the wireless system. I took it to my church gig yesterday and it well, just worked, with no tweaking on my part; save for adjusting the sensitivity levels which I didn’t even think to do when I first opened up the box. In fact, I didn’t even read the manual when I took it out to try in my studio. I just attached the antennas to the receiver and plugged in the instrument wire into the transmitter, popped in the batteries, and let ‘er rip. It literally took less than a couple of minutes to get up and running. Insofar as my church gig is concerned, it was a great venue to put the unit through its paces, as there are potentially several wireless units in operation at one time, including my own wireless headset mic. I’ll talk more about the system’s operation below.

In any case, since this isn’t something that actually makes music, my review areas are going to be a bit different from my normal reviews.

Ease-of-use

As I indicated above, the unit’s pretty plug and play. But of course, you should check the sensitivity of the transmitter and receiver to make sure you’re not overdriving the unit. The LCD’s on both the transmitter and receiver makes setting sensitivity of either unit a snap. Both have an active meter and navigating to the sensitivity menu is just a couple of button presses. Sennheiser did a great job with the menus to make them only two levels deep, so you won’t have a problem getting to the parameter you need to set.

Durability

Both transmitter and receiver have very sturdy metal housings, so you needn’t worry about the units cracking. The transmitter has a real solid feel, and that instills confidence that you don’t have baby the unit, though of course, it’s always good to take care of gear.

Performance

Despite having 1680 UHF frequencies to scan, the receiver locks on to a usable frequency almost instantaneously once you turn it on. That is such a boon to using the unit. You switch it on, and you can use the unit.

One of the tests that my sound guy and I did was for me to walk a distance away from the receiver to see if it lost connection. I honestly don’t know what the maximum range is, but no matter how far I got away – I got about 100 feet away – the transmitter and receiver didn’t lose their connection to each other.

To save battery life, when I’m not playing I always switch off the transmitter on my headset mic. I did the same with the G3 in between songs. Every time I switched it back on, making a connection to the receiver only took a couple of seconds.

Final Verdict

I haven’t even begun to explore all the different features that this system has; one of which is a cable emulation mode that simulates a cable’s capacitance to ensure consistent operation of your effects and amp settings whether you’re plugged in or wireless. This a great feature. Admittedly, I didn’t use this, but my rig sounded pretty much the same with the same dynamics once I dialed in the sensitivity of both transmitter and receiver. Or it could be that the only thing I obsess about with my tone is if it sounds good and I’ve got dynamics. Minute changes due to changes in my chain don’t really bother me too much. So if I got a slight change in tone, since my sound with the G3 system was good with no loss in dynamics, it didn’t trigger anything displeasing with me.

But other than performance and sound and all the other stuff I discussed, going wireless is simply fantastic. I like to move around a lot when I perform, and not being tied to a spot by a cable is so freeing! It really boosted my ability to lead musical worship, and that is so COOL!

Read Full Post »

Aracom PRX150-DAG Video is out!!!

Posted in aracom amps, attenuator, GAS, gear, gear reviews, guitar, guitar gear, guitar gear reviews, guitarists, Guitars, Music, musicians, new gear, PRX150-DAG, tagged , , , , , , , , , , , , on August 9, 2010| Leave a Comment »

When you’ve got a guy like Lance Keltner singing the praises of your equipment and calling you a genius to boot, you must be doing something right. Jeff Aragaki of Aracom Amps is someone I’ve been praising for quite awhile, and I’m glad he’s finally getting the recognition he deserves.

As far as the DAG unit is concerned, that’s available exclusively through Destroy All Guitars. I’ve played through one of those units myself, and the high-cut filter works great, and definitely takes the edge off, without throwing a blanket over your tone and dynamics like many attenuators do that include one. If you have an amp that outputs lots of highs when cranked – or somehow hear high-frequency transients –  then the DAG unit is the way to go.

Coming up…

While Jeff has gained lots of popularity with his attenuators, often overlooked are his wonderful amplifiers of which I have three. In the next couple of days, I will be getting a 50 Watt Evolver to test out in my studio. I’m so excited! I’ve played through an Evolver at Jeff’s workshop and that amp has tons of balls! It’s definitely Marshall-esque, but with Jeff’s particular twists. I’m excited to be getting this unit for a full test!

Read Full Post »

Nothing Like Vacation…

Posted in guitar, guitarists, Guitars, Music, new song, tagged , , , , , , on August 1, 2010| 2 Comments »

…to get me inspired.

I’m on vacation right now up at Clear Lake, CA. It’s one of those family vacations where we do pretty much nothing but chill out. Our resort is on the lake, and it’s absolutely gorgeous! We don’t have any plans, no itinerary; there are places to go, but we have 10 days of just clearing out our minds.

This afternoon after attending morning Mass, we headed back to our resort. The rest of the family went to the pool, while my oldest son and I hung out in our room. He was “PhotoShop-ing” some pictures, and I was just tooling around on my acoustic. I was just messing around when I came upon a chord progression that kind of stuck. So I pulled out my IK Multimedia StealthPlug (it goes everywhere with me), opened up GarageBand, laid down the chord progression, then laid down a melody with a counter-melody.

This was total stream-of-consciousness. I LOVE THAT! I told myself when I started my vacation that my aim was to chill. Not think about work, not think about stuff to do around the house, and not think about music to write. Clearing out my mind made room for some creative juices to flow. So here’s a rough cut of the song I came up with; it’s called “Down Highway 29:”

Read Full Post »

I Don’t Care…

Posted in guitar, guitarists, Guitars, Music, musicians, tagged , , , , on July 31, 2010| Leave a Comment »

…if I’m playing acoustic or electric guitar. I love to gig! Mind you, it’s not an ego thing. I just love performing; always have. I’ve been doing the same weekly gig at a local restaurant going on seven years, and I never get tired of it! I love it because it’s such an intimate venue; especially when I can play outdoors. As the patio is in one of the busiest areas of a fairly popular outdoor shopping mall, I get to entertain more than just the restaurant-goers. And the cool thing is if people weren’t planning to stop and have a drink or a meal, many sit and don’t leave for a couple of hours. A lot of that probably has to do with song choice, but I think a lot of that also has to do with passion.

My thought about performing is that I just do what I do, and as I love music, I put everything into it. I don’t want to give this false persona just to make people listen to me. It’s a risky proposition because there’s always this “what if people don’t like it” thought that looms in the back of my mind. But I truly believe that putting your entire soul into your performance makes a huge difference. It’s easy to tell when people are just going through the motions – their performance and how they interact with the audience seems contrived. And putting your entire self out there also helps you connect with your audience.

I suppose that what it’s all about for me: Connection. I thrive on that connection. I thrive on taking people on an emotional journey with me when I perform. When I do my solo gig, I flip through my song book, not looking for charts, but to see what’s appeals to me emotionally. Last night, I was in kind of a romantic mood, so I did a bunch of love songs. Here’s a cover of one of them:

That song, no matter how many times I’ve played it over the years, always moves me, and when I perform it, I do my best to convey how I’m moved by it and the images I get of my lovely wife when I sing it.

If you’re a performer of any kind, here’s a suggestion next time you gig: Put your entire soul into your performance. It’s easy to say, but not easy to do. And for some, it’s terrifying. But it takes shedding your conscious vision of yourself and how you should comport yourself, and letting your true self shine through in your performance. You might be surprised at the depths of passion you can tap into…

If you ever get a chance to see Steve Miller live or a recording of a concert of his, watch both him and especially his sideman. Miller’s sideman is the epitome of passion when he plays. He doesn’t move around much at all – he leaves that up to Steve – but when he gets a lead break, that dude puts everything into it. I was actually more blown away by him that I was Steve Miller when I saw a recorded concert last year!

By the way, I may be on a short hiatus with GuitarGear.org for a week or so. I’m going on a much-needed family vacation!

Read Full Post »

Gear Review: 1959 Les Paul Replica

Posted in GAS, gear, gear reviews, guitar, guitar gear, guitar gear reviews, guitarists, Guitars, les paul, Music, musicians, tagged , , , , , , , , , , , , , on July 19, 2010| 4 Comments »


Click to enlarge

 1959 Les Paul Replica

Summary: About as close as you can get to the real deal without paying hundreds of thousands of dollars.

Pros: Bright and super smooth tone, and sustain that’s absolutely to die for! This guitar is everything I imagined a ’59 Les Paul to sound and play like. Sounds and plays better than any Gibson re-issue I’ve ever played.

Cons: None

Features:

  • One piece Honduran (Old Growth) Mahogany body and neck (long tenon), 1959 neck profile
  • Brazilian rosewood fretboard with trap inlays
  • Lightly figured (realistic) maple top
  • Holly headstock veneer
  • RS Guitarworks (Winchester, KY) Nitro Lacquer finish with light aging in a Perryburst (Joe Perry burst colors), includes RS Guitarworks Certificate of Authenticity
  • PLEK and nut work
  • RS aluminum tailpiece
  • Tonepros AVRII bridge (Locking) ABR-1 Bridge with Maple Flame Mod (extra long stainless steel bridge studs)
  • Pots and Tone Capacitors from RS Guitarworks
  • Bone Nut
  • Wolfetone Dr. Vintage pickups with aged Nickel covers
  • Single line Kluson tuners
  • Weighs 9.68 lbs and is a rock machine
  • Year Built:  2008

Price: Vary from $4000 to  $20,000 depending upon who builds it (more on that below)

Tone Bone Score: 5.0 ~ This guitar is a dream come true! I recently wrote on my Facebook status: “There are guitars and then there are Les Pauls. There is no substitute.”

The first thing you’ll notice in the review is that I didn’t name the luthier of this guitar. That’s because I didn’t want to “out” the luthier, lest Gibson finds out and sues them for copyright infringement; that’s how close these replicas get to the original. But despite the risk of litigation, there’s an incredibly active underground market for these replicas, and having played around with this one for a few days, I don’t think that market will ever die. BTW, if you want to know who the luthier is, just send me an e-mail (goofydawg “|” guitargear.org), or if you’re on TGP, send me a PM.

Besides, replicas like this put Gibson back on the relevance map. Can you say Slash and GnR’s “Appetite for Destruction?” Whether or not Gibson likes it, the replica that Slash played made the Les Paul popular among guitarists again.

Forget how close it may come to the sound, feel, and dynamics of the original. Playing this guitar is like a religious experience! With this particular model, the original owner had the neck slightly tapered near the heal to relieve some of that “baseball bat” girth. It worked marvelously! Combined with the PLEK treatment, this guitar is absolutely easy to play. I usually have to take a few days to get to know the feel of a new neck. I even had to do this with my beloved Gibson Nighthawk. But with this guitar, I felt right at home!

Weight-wise, it has some heft at 9.6 lbs., but it’s so comfortable, and once I started playing, I completely forgot about the weight.

Here are some pictures:

Pictures courtesy of Bennie Delumpa (my son).

Fit and Finish

As you can see from the pictures, the guitar has been lightly relicked. I’m not normally a fan of aging a perfectly good guitar, but the purpose behind the aging was to produce a guitar that looked like a well-taken-care-of guitar from 1959. It has a couple of nicks on the binding of the body, and the lacquer has been very, very lightly checked. But other than that, it’s gorgeous.

How It Sounds

Unfortunately, my studio is still in a bit of disarray after the construction I had done on my house, so I don’t have my usual sound clips. But all I can say about the tone of this guitar is that it is nothing short of spectacular. The tone is on the brighter side of midrange, but the guitar produces all sorts of overtones and harmonics. The pickups used in the guitar are not hot at all, but that just makes it real smooth. Another thing is that the cap values used for the tone knobs make them quite usable. You can really knock the tone down, and the tone will not muddy up. I love that, as it gives me that much more tone shaping capabilities that I can do right at the guitar, as opposed to doing it at the amp.

The guitar also sports the classic Les Paul “bloom” as the body resonates, and boy does it resonate! Pluck a string, and you get your note, and then the body starts resonating, and you can hear AND feel the swell of the string vibrations as they course through the tone woods. I just close my eyes and go off to Never-never land.

There’s a lot to be said about old growth wood that has been drying for 50 years. Jeff Aragaki, who is quite knowledgeable about Les Pauls (he has many) is convinced that the combination of materials (old growth woods, hide glue, nitro-cellulose lacquer, correct hardware, etc.) that were used on this guitar make its sound that special. I really have never played a guitar that sounds and responds to like this!

I was just thinking that once I do manage to get a recording of this guitar, it just won’t do justice to the feel and dynamics of this spectacular specimen. I’ll hopefully be able to capture at least some of what I’m talking about.

Overall Impression

As I said above, forget about how close it may come to the original. I’ve never played a guitar that felt and sounded as good as this. I’ve never played a real ’59, but this guitar just oozes Les Paul goodness, and it’s everything I believe a Les Paul should be!

Read Full Post »

Facebook Hell

Posted in guitar, guitarists, Guitars, Music, musicians, new song, tagged , , , , , on July 8, 2010| 1 Comment »

This is a song that I just wrote this evening. I’ve been wanting to write a song about my family’s obsession with Facebook for awhile, but couldn’t come up with lyrics nor the genre. So I decided to try country western, but with a bit of a twist. Then the words just kind of came. My studio isn’t up right now, which is why I recorded this on video to start out with. I’ll do a regular recording once I have my studio set up again. BTW, I used my wonderful Yamaha APX900 acoustic.

Read Full Post »

DBZ Guitars Receives “Best In Show” Award at 2010 Summer NAMM

Posted in GAS, gear, gear announcements, gear reviews, guitar, guitar gear, guitar gear reviews, guitar reviews, guitarists, Guitars, Music, musicians, new gear, tagged , , , , , , , , , , on July 6, 2010| 4 Comments »

Even though I got this news via a press release, it doesn’t surprise me at all that DBZ won the Best In Show award this year. I’ve been quietly following DBZ since they hit the scene, and I’ve appreciated what Dean Zelinsky  (founder of DBZ and famous for Dean Guitars) has been trying to accomplish with his guitars from the start; that is, build great looking, great sounding, and great playing guitars at a GREAT price. Yeah, that’s a common formula, and lots of people try to do that, but Dean has accomplished that.

Take, for instance, the Imperial Premier model to the left. I had the chance to hold and play around with one of these exact models in Transparent Wine a couple of weeks ago (didn’t get to plug it in, though hopefully the DBZ rep will let me borrow one for a review). The Imperial has some classic styling – it’s shaped very similarly to a Gibson SG, but that’s where the similarities end. If you look at the picture to the right, you’ll see how incredibly thin the body is. That makes for a super, super, super light weight. All I could say when I first picked it up was, “Wow!”

Now you might think that that would never fly, but I have to tell you, that guitar felt absolutely wonderful, and I could feel the string vibrations resonating through the body as I played. The soft v-shape of the neck stands for Very comfortable. The fretboard is nice and smooth. DBZ calls it “ebonized” rosewood – not sure what that means, but it’s as smooth as ebony, and I just love the feel of ebony fretboards.

Unfortunately, I didn’t get a chance to plug it in because I was busy picking up my Fishman Solo Amp. But just based upon my initial inspection, and just holding it it in my hands, if I wasn’t getting the Fishman, I wouldn’t have let the rep leave the shop with the guitar. Yup, I was THAT impressed! Even the store manager was completely blown away by the guitar. He’s a jazz player, and while he said he prefers archtops, he loved that guitar.

Here are some specs:

  • Construction/Scale: Set Neck 24.75″
  • Body: Mahogany/Maple Top
  • Flamed Maple Top
  • Natural Scrape Binding
  • Fingerboard: Ebonized Rosewood
  • Neck: Mahogany Soft V Neck
  • Frets: 22
  • Inlays: Premier Series
  • Pickups: DBZB/DBZ5
  • Electronics: Vol/Tone/3-way
  • Tuners: Grover
  • Hardware: Gold
  • Bridge: DBZ Custom Stop Tail

Pretty nice features. You can see more pictures and other information on the DBZ site.

Here’s the real kicker: You can get this guitar for $649 online!!! Fat Tone Guitars outside of Chicago has these in stock. So how is the price so low? Simply put, it’s due to technology. Dean Zelinsky isn’t shy nor embarrassed by this blatant use of tech to build guitars. And why not? With computerized routers, you can ensure build consistency. Plus, I believe all the heavy work is done overseas, so that keeps the prices down. Even though I try to stick to US-made gear where I can, in the end, geographic location is far less important to me than how the gear plays and sounds.

DBZ is still trying to build its dealer base, but I encourage you to check one out if there’s a shop near you.

Read Full Post »

Quick Review: Groove Tubes GT-6L6GE US Re-issues

Posted in 6L6, GAS, gear, gear reviews, guitar, guitar gear, guitar gear reviews, guitar tone, guitarists, Guitars, Music, musicians, NOS, tubes, tagged , , , , , , , , , , , , , on June 18, 2010| 1 Comment »

If you read this blog with regularity, you know that I love NOS tubes. Who knows? Maybe I’m being a cork-sniffer, but the significant impact NOS tubes have had on my amps has led me to preferring them over new production tubes. Unfortunately, NOS tubes are getting scarcer and scarcer, so I suppose that eventually I’ll  have to get new production tubes.

Now a company that I’ve tended to steer away from is Groove Tubes, mainly because they’re just re-labeler of various OEM tubes. They just measure voltage, match ’em up, relabel them and sell them as their brand. Nothing wrong with that, but I haven’t met a Groove Tubes tube that I’ve liked, until I discovered the Groove Tubes GT-6L6GE Re-issues.

Before I go on, I should clarify that I’m not talking about the current production 6L6GE’s, which are assembled overseas. The tubes I’m talking about were made in the USA up until about 2003, as far as I can tell.

What makes these tubes special is that they’re constructed of NOS materials (except the glass), and to the same specs as the original GE 6L6’s of old. Plus they were constructed in Southern California, so the quality is incredible. These tubes rock! To be honest, I’m not sure of all the details of their production, but I got the information from Brent Jesse @ audiotubes.com who recommended them to me.

I bought two sets so I could have a spare set, and have been in tonal heaven with my Hot Rod Deluxe! The cleans are lush and deep, and the overdrive is creamy smooth. I have other GE power tubes, and I’ve gotten used to their smooth distortion. These GT-6L6GE’s are no exception! In addition to their smooth breakup, they also don’t compress much, which is another thing I just dig. I prefer a more open distortion.

I compared these to both JJ’s and regular Groove Tube 6L6GT’s, and these just blow them away. The JJ’s and GT’s have nice, clear cleans, but forget about their tone when cranked up. The tone is harsh and gritty, even if I bias them a little hotter than spec; whereas the 6L6GE’s remind me of the breakup I get from my Plexi clone – without hot biasing! Amazing!

As these are no longer in production (don’t confuse these with the new 6L6GE’s), they’re a bit more expensive than the new production 6L6GE’s; $80 per pair as opposed to $55-$58 a pair. And because they have the same labeling as the new ones, it’s hard to tell them apart. So I recommend that if you want to get a pair, get them from a source you trust. As I mentioned, I get them from Brent Jesse Recording and Audio, and having purchased several tubes from him, I trust him implicitly.

All that said, I will be getting a set of the new production tubes to make a comparison, as they are also made with NOS materials, though assembled overseas. Who knows? They may just sound killer as well!

Read Full Post »

Gear Review: Fishman SA220 Solo Amp

Posted in amplifier reviews, amplifiers, amps, Amps/Amplification, GAS, gear, gear reviews, guitar, guitarists, Guitars, Music, musicians, performing, tagged , , , , , , , , , , , , , , , , on June 17, 2010| 37 Comments »


Click to enlarge

Click to enlarge

 Fishman SA220 Solo Amp

Summary: Compact and weighing in at just 25 lbs., the SA220 Solo Amp is an ideal PA solution for the solo acoustic guitarist/vocalist, but it’s versatile and loud enough to be used as a PA for a band (if you have a couple of them).

Pros: It may not have the Bose name, but I’d put this up against the L1 Compact system any day. With built-in, independent, 3-way EQ, and a variety of other features, if you’re a solo acoustic artist, you owe it to yourself to check this unit out! I got it set up in less than a minute!

Cons: None

Features:

  • Drivers

    • – Six 4″ mid-woofers, patented dual gap, high excursion design, neodymium magnets (200W)
    – One 1″ neodymium soft dome tweeter with level control (20W)

  • Auxiliary Stereo Input with Level control
  • Four Digital Reverb effects with master level
  • Balanced XLR D.I. outputs for both channels and main mix
  • Independent effect loops for Channel 1 and Channel 2 (OMG!!!)
  • Unique Monitor I/O for improved on-stage ensemble monitoring
  • Mute with remote footswitch input
  • Tuner Output
  • Ships with Stand and padded Carry Bag (w/ wheels)
  • Dimensions: 41.5″ H x 5.6″ W x 6.6″ D
  • *Weight: 25 lbs without Stand, 35lbs with Bag and Stand

Price: $999 Street

Tone Bone Score: 5.0 ~ Talk about ease of use! As I mentioned above, I got the SA220 set up in less than a minute! And my Yamaha APX900 sounds absolutely killer through this, not to mention the great clarity of the vocals. This is a winner, folks!

Year over year, I play between 100 to 150 gigs a year, with about half of them as a solo acoustic act. My solo gigs have consisted mainly of my weekly restaurant gig, but I do lots of weddings and special events throughout the year as well. Of late, the restaurant I gig at moved my act outside in a public patio area as the weather is gorgeous.

To make a long story short, even though the restaurant has a decent PA system, I ended up bringing my own PA last week, which was the first week we did the outdoor show. That worked pretty well, and my PA has a great sound. But it also made me realize that the old mixing board, and big 300 Watt speakers was just too much gear to haul around. Even if I ended up using the restaurant’s PA, which is a nice one, I’d still have to lug the board and speakers and stands down from the office upstairs. Enter the Fishman SA220 Solo Amp.

Plug It In and Go!

I finally received my SA220 today after having to wait for a couple of weeks for it to arrive (had to be ordered). So when I got home, I knew I had to try it out to see how it sets up, and of course, to work out kinks before I gig with it. There’s nothing worse than fighting your rig or sound DURING a gig – especially when you’re solo.

The guys at the shop assured me that Fishman’s claims of easy setup were true. I am now a believer! I had the SA220 set up in exactly 42 seconds!!! That didn’t include hooking up my pedal board, guitar, and microphone, but I had the system on its tripod stand and plugged into power, ready to go, in that short amount of time. That just blew me away! Plus, everything you need to get up and running fits into a single carrying unit that consists of two bags: One for the array/PA, and one for the tripod that buckles to the main bag. Talk about convenience! Fishman really had the solo artist in mind when they built this!

How It Sounds

For my audition, I just plugged my guitar into the SA220 directly, and hooked up my microphone. All I can say is that the sound is spectacular! I was actually concerned about the bass response of the unit, but apparently Fishman distributes the bass response among the six main mid-woofers. It may not get boomy with the bass, but the sound is absolutely rich, and vocals are clear and full. Normally, I use a DI to go into a board – and will probably do the same with this unit, but my guitar sounded clear and natural and full plugged in directly without those annoying high-end transients and flattened tone that is so annoying with plugged in acoustics. Admittedly, the ART system in my Yamaha APX900 has quite a bit to do with that, but Fishman really knows how to condition sound.

At first, I had a bit of a problem with feedback, but setting the phase switch and tweaking the anti-feedback knob (it’s a variable frequency notch filter designed to subdue a resonant peak – just turn it to where the feedback gets reduced or eliminated – very cool), and attaching the rubber sound hole cover on my guitar took care of the feedback problem.

Luckily no one was home when I tested the SA220. I set it up outside so I could see how it performed. Damn! Even with just 220 Watts, the SA220 is LOUD!!! I had the Master volume set at around 10 am, and that will be enough to fill the large patio space I’ll be playing in tomorrow! It’s not a stretch to say that the SA220 can cover a lot of venues.

As far as listening angle is concerned, the SA220 disperses the sound incredibly well! Even at extreme angles, where I was almost even with the array, the sound was clear with good volume. Of course, narrower angles are better, but this unit will have no problem playing in the open space I’ll be playing.

Talk About Bang for the Buck!

The sound is great, but I have to tell you, I was ready to get the Bose L1 Compact, which is a great unit, but the mere fact that if I wanted more EQ control and other features, I’d have to spend another $499 really soured my taste for the unit. On the other hand, Fishman has packed all sorts of features into the SA220 that make it hands-down the better value. Independent 3-band EQ for each channel, phase and anti-feedback control, 4 types of digital reverb, a mute switch (that is REALLY handy!), independent balanced XLR outs to go into a board, and my favorite feature: independent effects loop for each channel! You just can’t argue about with what comes built-in on this unit!

Overall Impression

It’s hopefully obvious that I love this unit! For me as a solo artist, it’s a true game changer! It’s light and versatile, and the sound is spectacular. What more could I ask for?

Read Full Post »

« Newer Posts - Older Posts »