Ahh… yet another distortion box! Hehe. You know I just dig ’em. This one is from the same guys that bring us the J. Backlund Designs guitars; specifically, Bruce Bennet, of Bennett Music Labs, the actual maker of the J. Backlund Designs guitars.
That turned out to be a bit of dead-end because I couldn’t find where to buy them. I finally found a place that sells the pedals, call OohLaLa Manufacturing. Apparently, they’re a distributor and production house for a bunch of boutique pedals. They either take designs from pedal designers, then manufacture them or, as I found out from Bruce Bennett today, they just distribute the finished pedals. Defintely check out their site! Too bad they don’t have sound samples.
The Brown Sound
The original “Brown Sound” was popularized by the likes of Jimi Hendrix and Clapton with the “Woman Tone.” In its simplest sense, the Brown Sound was produced by using a bit of fuzz combined with TONS of power tube distortion. The end result was a way huge sound! Fast-forward a bit, and the Brown Sound then became associated with Eddie Van Halen. But to produce his tone requires a bit more work.
What about the Brown Sound pedal? Well, it’s not an EVH tone simulator. Apparently, it’s more of a Hendrix tone simulator as the guys at Analogman describe here. Interesting to note that this pedal is not meant to add gain. The volume knob is more of a volume cut, and the drive adjusts the amount of “Brown” you get. That’s actually kind of cool because I’m assume you don’t have to mess around with the volume much to find unity gain. Just leave the volume knob wide open, and let the pedal do its thing.
I’m gonna have to contact the guys over at OohLaLa to get more information about this pedal. I love that tone, and to get it in a box would be awesome!
I forgot to mention: The pedal is all hand-wired, and it’s only $159! Pretty cool! Anyway, check out the video of how it’s made.
I know I’m dating myself, but I used to love watching “The Jetsons” when I was a kid. It gave me my first impressions of what the future might hold, like flying cars and floating burger drive-ins where you docked your car. Ah, those nostalgic memories of the 60’s…
Well, if there were to be a guitar on the Jetsons, I imagine that it would have to come from J. Backlund Designs. Talk about retro-modern mojo! The JDB-100 shown to the left just oozes that! What a gorgeous guitar, and from what I heard of the sound from the video below, it has a pretty aggressive tone that seems to fit with that retro-modern styling.
At first, I thought I’d hear something like Dick Dale doing some surf stuff, but the dude doing the review played pretty heavy stuff. I’d actually like to hear what it sounds like clean.
Anyhow, here are some specs:
Mahogany Neck and Body
Set-Neck Construction
Custom Inlays
Custom Double Action Two Way Truss Rod
Scale Length: 24.75
Hipshot Locking Keys
Hipshot Baby Grand Bridge
7 Degree Tilt Back Headstock Angle
Custom Color Matched Lace Sensor Alumi-tone Pickups
N-Tune Built In Chromatic Tuner
All USA Components
Custom Triple Chrome Plated Pick Guard
Custom Snakeskin Case
A real cool feature of this guitar is the built-in tuner. When engaged, the signal to the amp is cut off, so you can tune quietly. Hmm… Imagine that! You could remove the tuner from your board, and replace it with another boutique pedal! <sinister chuckle>
For more information, check out the J. Backlund Designs site! They’ve got 4 models, and the funny thing is that the JBD-100 is probably their most conservative-looking guitar! But they’re all cool!
I learned a really important lesson yesterday while I was recording some ideas in my studio: Where you place your amp; specifically, the speaker cabinet is very important. I never placed too much thought into this until I got my new amp. I had always had combos, and they just sat on the floor, so I never noticed the difference between having the amp on the floor and elevating it. But with my new amp, an Aracom VRX22, I got it as a separate head and 1 X 12 combo. Last night, I put the cabinet on top of a couple of PA speakers to prop it up, and I couldn’t believe how bright it sounded. Then I remembered Jeff saying that the bass response would be way better with the cab on the floor. He wasn’t kidding! Later this evening I’ll have some sound samples to prove the point.
Vinni Smith is such a great guitarist. He just released a new video entitled, “Why should you play V-Picks?” Yeah, it’s to hawk his picks, but everything he says is true. Having played V-Picks for a few months on my electrics, I just gotta say that these picks are the absolute bomb! I use only V-Picks on electric guitar. And that electric guitar he’s playing? That’s right, it’s a Saint Guitar Benchmark. 🙂
Yeah, yeah, I know… My last few posts have pretty much centered around this amp, but hey! I just can’t contain my excitement about how good it sounds! This afternoon, I brought it to my weekly church gig to try it out in a live situation. I already loved it in my little home studio, but you just don’t get to really know what am amp can do until you play it live.
Today was one of the first days that I didn’t use my pedal board all that much. In fact, I only used my chorus on one soft song, and then only used my booster at the very end of last song to throw the gain over the top to finish off the service. Other than that, I just played the amp straight. Most of the songs I played were through Channel 1, and with my Strat, the VRX22 delivered gorgeous, bell-like tones that seemed to hang in the air, with so much presence that you could almost touch them – it doesn’t even have presence knob to up the mids and highs! Switching over to Channel 2 for a couple of numbers, I was rewarded with layers of open and complex overdrive that were so very smooth; none of that phasing in and out that you often get with lesser amps at high gain. It stayed nice and even. And the sustain and touch sensitivity at high gain was just to die for – all on a Strat, no less!
When I slammed the front-end with my booster pedal, I was in compression heaven! But luckily the 6V6’s don’t compress so much that they make the amp lose volume. The compression is noticeable, but the gain tone stays fairly open. It tightens up, but not too tight.
I’ve tested several Aracom amps, and they’re all very sweet sounding. But the higher wattage amps need tons of volume before they really start sounding good. The VRX22 is so versatile. With a 1 X 12 cabinet, it can be used with ease in small to medium-sized venues, like clubs and small halls. For larger venues, a bigger cab will get you the volume you need. On top of that, both the amp and cabinet are pretty light in weight, making lugging to and from a gig real easy!
Just got my brand-spankin’-new Aracom VRX 22 amp, and I’m just lovin’ it! The blue tolex is absolutely gorgeous, and the amp sounds freakin’ fantastic through my 1 X 12 cabinet with a Jensen P12N speaker!
Yesterday, I wrote about how I was anticipating the delivery of my amp, and I have to tell you that there’s nothing like having the real thing sitting in front of you! I was so inspired after Jeff Aragaki dropped of the amp that I re-recorded the sound bite I originally created, to demonstrate just how good the amp sounds!
In the new clip, I recorded my Strat and Saint Guitars Benchmark through Channel 1 and panned the Strat to the left and the Benchmark to the right to isolate their individual clean sounds. Then I recorded the Benchmark wailing out of Channel 2, with the Volume at about 8, and the Master right in the middle. I closed up the back of the cabinet completely to get more bass response as well. Anyway, here’s the clip:
I’ve never had a #1 of anything in my life – or at least nothing of consequence – but this weekend, I’m taking delivery of the very first production amp in the Aracom VRX 22 line! That’s it to the left! OMG!!! I’m excited! This is a real special time for me. I’ve played all sorts of fantastic gear, but I’ve never played something so impactful on my music where I got the first unit! It’ll probably never happen again, but who cares? It’s happened once, and that’s all that matters.
I decided to go with the separate head and cab for more versatility (plus I could use the cab with other amps – like my Fender Champ, and as an extra speaker for my Hot Rod). This amp is just perfect, driven by a couple of 6V6 power tubes. Read the review I gave it previously! In a nutshell, when I had the pre-production unit, I just couldn’t stop playing it! I’d totally lose track of time! That’s the mark of a special piece of gear!
The cool thing about the cab is that it has removable slats so I can go from fully closed to get extra bass response to wide open. Jeff made this suggestion when we were talking about what I was looking for in an extension cabinet. A musician himself, he’s constantly thinking of how he’d use his amps in a live situation, and he made this suggestion to add tonal versatility to the cabinet because we were talking about closed back versus open back designs. So why not the best of both worlds?
Also, the speaker is a Jensen P12N Alnico. I tried this speaker out in a different amp that I was testing for Jeff, and just fell in love with it! It is a very dynamic speaker capable of handling a wide range of tones.
So how did I end up with the very first amp in the line? Easy. I tested the original prototype, and the final pre-production unit. When Jeff picked it up, he was going to bring over other amps for me to try out, but I told him that the VRX 22 was the one I wanted, and verbally placed my order.
This is a real special amp, and it is so versatile. It is capable of going from super chimey cleans to all-out snarling overdrive. Here are some sound samples from the Aracom site (sorry, no cleans in this set – I’ll record some and post them later):
Slight Grind (this one says it’s the combo, but it’s the head into a prototype cabinet – I know because I recorded the clip 🙂 )
The following clips were recorded with the head plugged into a 4 X 12 cabinet.
Slight grind with a slide:
Grinding Blues:
More grinding Blues:
Fully cranked in Channel 2! Volume and Master on 10!
While the clips all sound great, this amp live is absolutely gorgeous-sounding!
Oh, and by the way, the amp head only costs $895. But don’t be fooled by the price: The VRX (as well as all Aracom Amps) is completely handwired and uses a solid-state rectifier and voltage sag simulator, which accounts for the lower price. But who cares? It sounds freakin’ awesome. I gigged with both the prototype and the pre-production units, and I can attest to how great it sounds. And great sound at a price like this is simply amazing!
Summary: At 3mm, this is the thickest gauge that Red Bear offers (though you can get thicker ones by special order).
Pros: All the tactile goodness of a Tortis pick, but with real beef. At this gauge the speed bevel is very pronounced, and that is a good thing!
Cons: Cons? What cons? None.
Price: $30
Tone Bone Rating: 5.0 – This is my favorite Red Bear pick yet!
I love both Red Bear and V-Picks picks so much, that I give them away – and I gave my last Red Bear pick away last Tuesday to my friend and fellow musician Christy Martin of “Four Shillings Short,” a very long-lived Celtic band. It was great to see her reaction to how good my B Heavy felt to her! But that left me with no Red Bear!
As work has a tendency to make forget things, I was on my way to my weekly gig today when I realized that I didn’t have a pick! Luckily, my gig was a few minutes away from Gryphon Stringed Instruments in Palo Alto, so I resolved to go to the shop and pick up a new Red Bear. Once I entered the store, I went right to the pick case, and asked the sales guy to pull out the Red Bear tray. I was all set to get my normal B Heavy, when I noticed a Red Bear pick that I hadn’t seen before, a B-GJ! The sales guy said that the GJ stood for “Gypsy Jazz.” Well, of course I had to take it out of its pouch, and feel it. Mistake! The damn thing was beefy – nice and beefy, just how I like my picks.
I asked to try it out, and picked up a Martin dreadnought. From the very first strum, I knew this was the pick for me. But I also compared it to my beloved B Heavy, and there was just no comparison! I really loved the B Heavy, but since I’ve been playing with the V-Picks Snake on electric, I’ve developed a real penchant for super-thick picks, and at 3mm, this B-GJ felt just too good to pass up. So I returned to the case, pulled out my bank card, bought the pick, and went to my gig.
All I can say is that tonally, this had to be the best gig I’ve had in years! At this particular gig, I play solo with just me singing and accompanying myself with acoustic guitar and piano. I think I only touched the piano four times tonight! I was loving playing with this pick!
First off, as I’ve mentioned in previous articles about thick picks, you actually hold them lighter, which relaxes your hand muscles; thus you play faster. But from tone standpoint, I was in total heaven!
As expected, light strumming with the B-GJ produces wonderful, chimey and ringy tones. But the big difference I found between my old B-Heavy and B-GJ was when I dug into the bottom strings with the pick while simultaneously partially palm muting on the saddle of my guitar. What that usually produces is a subdued low-freq boomy kind of sound. With the GJ, it produced that tone, but it was much more pronounced. It was freakin’ awesome.
Moreover, I could ellicit all sorts of different tones by changing the angle of the pick. I could do that pretty well with the B-Heavy, but the tone was so much more full and rich with the B-GJ! I was really at my creative best tonight. A customer, who said he was also a guitarist, walked up to me at the end of his meal, and remarked how good my guitar sounded, and that it sounded nothing like an Ovation. I told him it was the pick, and let him hold it. “You could do all that with this pick? Damn! I gotta me one of these.”
Folks, this is just a dynamite pick, and it’s worth every penny of the $30 you pay for it retail (though it’s $5 cheaper if you buy direct from Red Bear Trading). For what this pick does for my acoustic tone, I just can’t think of using any other kind of pick for playing my Ovation!
I’ve personally had a mostly tepid response to BOSS’s multi-effects units. A buddy of mine has an ME-50, and he rarely uses it – though he has other interests besides guitar. But from what I’ve heard from it, it just never inspired me. But the ME-70 seems a bit more promising; the operative word here being “promising.” This new version packs 40 effects of what BOSS claims to be it’s “hottest” pedals. It doesn’t make me all hot and bothered, but it does pique my interest enough to go down to my local Guitar Center and try it out. It’s not a bad price of at $299, and for the solo gigs I play, having a nice, compact effects rig with some built-in amp models is definitely something to consider. But that said, the only REALLY promising multi-effects unit I’ve come across is the TC Electronic Nova System. But it’s also twice the price. Only a test will prove it out. In the meantime, check out the video from BOSS:
Summary: Modeling 12 of the most famous Fender Amps, Amplitube Fender is pretty amazing. It’s scary how close to the real thing this software gets!
Pros: Super-easy to install, and super-convenient to use in your DAW software. The package comes with TONS of presets that require very little tweaking.
Cons: This is just a little nit because it sounds so good, and I don’t want to take that away from this excellent piece of software. But it doesn’t quite respond like a real amp.
Incredible tonal flexibility: mix and match amps, cabinets, mics and more
Sound-certified and approved by the tone gurus at Fender®
5 separate modules: Tuner, configurable Stomp pedal board, Amp head, Cabinet+Mic and Rack Effects
2 fully configurable rigs with up to 32 simultaneous effects
Digital Tuner
Standalone and VST/AU/RTAS plug-in
Includes SpeedTrainer™ and RiffWorks™ T4 Recording Software
Can be expanded with any “Powered by AmpliTube” models using AmpliTube X-GEAR
Can be controlled live with StompIO™, StealthPedal™, StealthPlug (included in AmpliTube Fender® Studio edition), or any traditional MIDI controller
400 presets included with more that can be downloaded online
Powered by AmpliTube® with exclusive DSM™ (Dynamic Saturation Modeling) and VRM™ (Volumetric Response Modeling)
Tone Bone Rating: 4.75 overall, but for a recording plug-in, it gets a 5.0
Being a snobbish purist about “real” gear, 🙂 I’m not easily impressed by emulation software. But when I heard clips of the Fender Edition of Amplitube, I knew I had to check this software out. A million thanks go to the folks at IK Multimedia to letting me evaluate this software because I am definitely impressed by Amplitube Fender! It’s not everyday that you have access to 12 awesome Fender amps, and to have them literally a mouse-click away is just insane! I don’t think amp software will ever replace a real amp, but this software comes so close to sounding like the real thing that especially for recording, I’d be hard-pressed to NOT use it for recording lots of guitar parts!
I used an earlier version of AmpliTube a few years ago, and was not at all impressed by how it sounded. But being in the software development world, with time, software gets better, and I have to say that this software is absolutely incredible!
Now and then, I go off for a weekend alone, and I lug a couple of guitars, a couple of mics, an amp or two, and my MacBook, along with my MBox 2 interface to just do some writing and recording. With Amplitube Fender, I don’t need to lug my amps! I can just load my laptop and MBox an a couple of cords and a mic, and I’m home free! Hey! Not having to lug any extra gear is HUGE! I’m sold on using this software! Not only do I have my four real amps, I now have 12 other amps to choose from when I record! It’s really exciting!
How It Sounds
Imagine that! No need to write a section on fit and finish! 🙂
In a word, it sounds AWESOME! Right after I installed the software, I plugged my Strat into the DI jack of my MBox 2, opened up GarageBand, started a new project, added a new track, and selected “Amplitube Fender” from a plug-in drop down. It was literally that easy! I randomly picked a ’57 Deluxe Dual Mic, then started to strum this little ditty in Am. Before I knew it, I was adding drum and bass tracks, to record the riff.
I’ve played through a ’57 Deluxe in the past, and I was amazed at how the software emulated that warm, bright and crisp sound that that amp is known for! I kept on thinking to myself, “This couldn’t be software – it sounds to friggin’ good!” After I recorded that rhythm track, I took out the Goldtop to play a lead. I ended up playing for over an hour this evening just tooling around with different amps. In the end, I wanted to get a sample out, so I chose a ’59 Bassman with a Fender Fuzz-Wah plug-in to get some fuzz, then recorded the following sound bite:
I don’t know about you, but I really can’t tell the difference between the real thing and software. Maybe because I’m starting to lose my hearing and my ability to discern audio fidelity is kind of going south. No matter, I think this software ROCKS!
Overall Impressions
Amplitube Fender does a fantastic job of amp emulation – there’s no arguing that at all. But there’s a certain “mojo” about a real amp that just can’t be captured with software, no matter how close to the real thing that software sounds. That said, however, even one as snobbish as myself, and other gear freaks I know would be hard-pressed not to seriously consider adding this to their arsenal of recording plug-ins!
Guitar Gear 