Feeds:
Posts
Comments

Posts Tagged ‘amplifiers’

What is it about the tone of a Plexi or Plexi-style amp?

Posted in Guitars, tagged , , , , , , , , , , , , on November 24, 2010| 3 Comments »

I did a “What is it about…” regarding the tone of a 100-Watt amplifier recently, and while I’m now hooked on higher-wattage amps, and will probably sell off a few of my low wattage amps, I’ve got some other lower-wattage amps – namely, my Aracom amps – that I will never part with because of their insanely fantastic tone and dynamics. While not nearly as beefy-sounding or -feeling as a 100 Watt amp, they just ooze great tone, and when cranked to the hilt, just sustain for days!

For instance, this morning I played a church service at my kids’ school and had two of my fellow church band members to play a power trio. Since we didn’t have a lot of room (the 5th grade class shares our normal band space), I just brought my Aracom PLX18 BB Trem combo with me so I wouldn’t have to hook up a cab. This amp is based upon the popular Marshall 18-Watt Plexi circuit, which is absolutely simple, as all vintage Plexi circuits were. It has a single gain stage that feeds into an EQ (and on the PLX, it’s a single tone knob to bleed off highs), then straight into the power amp. I believe it’s this simplicity that gives the amp and its Marshall ancestors such pure tone.

With their single gain stage, obviously amps of this ilk will not do over-the-top overdrive, and have to be cranked (as in dimed) to deliver any overdrive. But when they do deliver it, it’s smooth as silk and incredibly dynamic and articulate. This has always been my experience with Plexi-style amps, be they 100 Watts or 18 Watts. For my own PLX, as I said, it may not have the beefy tone that a 100 Watt version may offer, but that smooth overdrive and dynamicism is all present.

Anyway, I set up my rig this morning and I warmed up the amp. Then I plugged in my Gibson 2009 Limited Run Nighthawk, and started playing some warm-up scales. I hadn’t played my PLX for awhile, and running through my warm-up, I was reminded about how damn good that amp sounds! As Jeff Aragaki (Aracom’s owner) puts it, “It doesn’t matter what wattage the amp is. You just know a great amp when you play and hear it. And Marshall got that circuit right.” At least to me, Jeff couldn’t be more right. The PLX is pretty much an exact copy of the classic 18 Watt Plexi circuit (with some slight mods that Jeff has made), and that amp was made to be hit hard. When you do that, you’re rewarded with a tone that, at least to me, is other-worldly! If you’re looking a great Plexi-style amp, this is an amp you have to check out!

Here’s a little treat. Gene Baker of B3 Guitars recorded a great clip that demonstrates the PLX18’s wonderful crunch tone. Check it out:

Over the years, I’ve tried and tested a lot of different amps, and several that cop Marshall designs. No doubt, there are some great amps out there, but Jeff at Aracom really “gets it” with respect to vintage Marshall-esque amps. The cool thing is that instead of making an exact replica of the circuits as many amp builders do, Jeff sees where he feels the designs may be weak, makes corrections or improvements, or creates new amps altogether from the base. For instance, my VRX22 started out as a Plexi 18, but Jeff wanted to add more gain with the second channel, so he added another gain stage that acts as a tube overdrive that’s always on, went from EL84’s to 6V6’s, and what he came up with is an absolutely superb amp that has vintage-style Marshall dynamics, but a sound all its own.

For more information, please visit the Aracom Amps site!

Read Full Post »

Amazing what an overhaul can do…

Posted in Guitars, tagged , , , , , , , , , , , , on November 10, 2010| Leave a Comment »

I was so excited to finally get one of these several months ago! I played it A LOT until the original caps finally wore out and started to leak both fluid and the amp started leaking electricity (i.e. I could feel current when I touched the amp – not good!

So I had my good friend and amp genius, Jeff Aragaki of Aracom Amps overhaul the amp. I just got it back a few days ago, and it totally kicks ass! Among Jeff’s mods were:

  1. Replace the original two-prong cord with a grounded three-prong cord. For this, he had to make some adjustments to the heater.
  2. Replace the original caps with new Sprague paper caps.
  3. Replaced the original speaker with a new Weber 8″ speaker.
  4. Provide a way for me to use either the internal speaker or an external cabinet. This was done by connecting the output wire to a jack and running that into a custom switch box that he constructed.

But Jeff actually did one better, and that was to put the amp chassis in a larger tweed cabinet that had a 10″ speaker. What a difference in volume and tone!

That amp is VERY special, and it’s not a small wonder why Jeff Beck is now using Champs. He can get great tones at lower volumes! For instance, here’s a new praise song I recorded using just the Champ for the guitar tracks. The rhythm track was recorded using the 10″ speaker with the mic at the rim of the speaker cone pointed along the angle of the paper so I could capture more of the low frequencies. The “lead,” overdriven guitar used a closed-back external 1 X 12 cabinet with a Jensen Jet Falcon. It sounds like it’s coming from a much bigger amp!

For guitars, I used my trusty Squier CV Tele for the clean rhythm, and used my Gibson R8 Les Paul for the “lead.”

The thing that struck me about playing the amp was how it really responded and felt like an amp 10X its size. The touch-sensitivity and dynamics, especially when cranked, are spectacular with lots of overtones and harmonics. Being naturally brightly voiced, this amp never gets muddy. It’s actually rather unsettling to play this amp at times because it sounds much bigger than it actually is. That’s VERY cool!

Read Full Post »

The VHT Special 6 ROCKS!!!

Posted in Guitars, tagged , , , , , , , , , , , , , on October 21, 2010| 7 Comments »

Since I’ve gotten it, I’ve been absolutely digging the VHT Special 6. It’s such a versatile little amp, with bright cleans and capable of creating some gorgeous, sustaining overdrive. And while I do certainly appreciate its clean tone, this amp totally shines when it’s cranked to hilt.

To demonstrate, here’s a clip I recorded this evening with the VHT Special 6:

Now here’s the thing about recording with a low-wattage amp. I’ve found that almost invariably, it’s difficult to get a big sound out of the stock speaker, no matter where I place the microphone. People recommend recording from an angle lined up along the outside of the speaker cone. I’ve never had much success with that, considering I’m not using any high-end mics. So my solution is to use larger speakers to get that bigger sound.

For this clip, I used two different 1 X 12 speaker cabinets: The rhythm track was recorded using a Fane Medusa 150 speaker to get a bigger bottom end. The lead was recorded with a Jensen Jet Falcon – that’s my favorite speaker at the moment. And of course, because even 6 Watts cranked is very loud, I ran the amp through my Aracom PRX150-Pro and recorded each track at about loud conversation level. It’s just loud enough to move the speaker cone a bit, but not so loud that I’d wake up the neighbors. 🙂

For both parts, I used my Les Paul R8. For the rhythm, I recorded in the middle selector switch biased towards the bridge, and for the lead, I recorded with the bridge pickup only. To make the guitar tone sound even bigger, I added just a tiny bit of compression to each track and added a touch of small room reverb to add some dimension. I didn’t EQ the guitar parts at all. That’s the natural sound of the amp through the speakers I used. The compression keeps the sound focused. At least to my ears, the guitar parts sound like they’re coming from a much bigger amp.

As far as the amp setting were concerned, I was plugged into the hi input with the amp set to high-power mode. Tone and volume were at 3pm, and I engaged the Boost. Even at these cranked settings, the amp will clean up very nicely! That’s how responsive this amp is!

Admittedly, if I were to rewind and go back to when I bought the amp, I’d probably go with the head. The stock speaker is great for practicing, but for gigging and recording, it just sounds much better with at least a 1 X 12. But hey! A handwired amp for $199? Geez! I can live with its shortcomings as what it brings to the table tonally is fabulous!

Read Full Post »

What’s Your “Go-To” Tone?

Posted in Guitars, tagged , , , , , , , , , , , , , on October 11, 2010| Leave a Comment »

Like any gear freak, I’ve got tons of gear. Just check out the “My Rig” page, and  you’ll see what I mean. I use it all. Now while I rotate my usage of guitars, I use all my amps in the studio. But when playing out, I almost invariably go with a specific type of setup: A humbucker guitar through a vintage-Marshall-style amp; and lately and more specifically, a Les Paul through a Marshall-style amp. That tone simply speaks to me. Clean or dirty, it’s what I almost always go to in a live situation.

At my church gig yesterday, I brought along one of my favorite amps: My Aracom PLX18-BB Trem, which is a “Bluesbreaker” style 18 Watt Plexi clone with two channels and no master volume. With that amp, I usually play in the Bright channel, which is a clone of the Plexi circuitry. This is a simple channel with just one volume and one tone knob. I love this channel! I usually have the volume dimed, with the tone at about 3pm, then control the amount of breakup with my guitar’s volume knob and/or pick attack. That amp just oozes Plexi goodness, and is so incredibly dynamic. The EZ81 rectifier provides just the right amount of sag, where even with the amp dimed to the hilt, it never turns soupy or mushy due to sag. I also loaded it with NOS ’59 GE 12AX7’s in V1 and V2, then have a 60’s JAN Philips 12AT7 in V3. To compensate for the overall brightness of the amp, I loaded a kick-ass Fane Medusa 150 to bring out the bottom end. The net result is that this amp sounds A LOT bigger than its 18 Watts may imply.

Then take all that Plexi goodness and combine it with a Les Paul, and to me, that’s a recipe for rock-and-roll! 🙂

It took me several years to get my “Go-To” tone, which accounts for the gear that I’ve got from my explorations; not that I’d get rid of much of it because in the studio, having lots of gear to get different sounds is important, but for me, when I’m playing out, it’s the Les Paul/Plexi combo all the way. To my ears, there’s simply nothing like the tone that that combination produces!

So what produces your “Go-To” tone?

Read Full Post »

Must-read Article on the Sound of Tubes!

Posted in Guitars, tagged , , , , , , on October 5, 2010| 3 Comments »

Like many, I participate in various forums on the ‘Net, and I came across a plug for a fascinating article written in 1998 talking about devices that employ tubes – specifically amps and hi-end audio – and does a very good job of explaining why people gravitate towards tubed devices. Here’s the link to the article. It’s long, but worth it!

http://spectrum.ieee.org/consumer-electronics/audiovideo/the-cool-sound-of-tubes/0

Read Full Post »

The Incredible, the Versatile, Heck the KICK-ASS Aracom VRX22!

Posted in Guitars, tagged , , , , , , , , , , , , , , , , , , , on October 4, 2010| Leave a Comment »

Aracom Amps VRX22 - First in the series

The Aracom VRX22 has been my primary amp for quite some time now – almost 2 years – and I’m still discovering the beauty of this wonder 22 Watt amp. It’s no small wonder that it has been my “Go-To” amp since I’ve gotten it. It sounds so killer both clean and dirty, and tonight, I realized just how great it is with pedals!

Since I’ve had the VRX22, I haven’t been using my overdrive pedals as much. I know, I used to be a real nut about overdrive pedals, and I have several. But this afternoon, I reconfigured my board, and placed my favorite drive pedals on it with the intention of using them. This included my Doodad Guitars Overdrive/Booster, Tone Freak Abunai 2, and my KASHA overdrive.

For my gig, I set the amp up in the clean channel, with the volume at a level where I’d have to dig in a bit with my Les Paul to get some grind. This would leave me with lots of headroom to work with, and not break into overdrive so early that all I get is more overdrive, and not volume.

Then I tweaked the overdrive pedals so I’d get different characters of overdrive, depending upon what I was after. I set the Doodad up for Tube Screamer like overdrive, at just over unity gain, but with the drive knocked up a bit so I’d get lots of sustain. I set the Kasha on “Classic” at just above unity gain for a more biting, trebly tone. Then I set up the Abunai 2 for a more thick, compressed overdrive.

The one thing I love about overdrive pedals is that as opposed to providing all the distortion as with a distortion pedal, they are meant to interact with the amp so what you get is a combination of distortion characteristics from both the pedal and the amp. This combination doesn’t always work so well. I’ve played many amps and some just want to overdrive by themselves. Using an overdrive pedal with those amps just muddies the tone. It’s not pretty.

Not so with the VRX22. I’ve thrown all sorts of pedals at it, and it handles them all without a hitch. It’s especially good with overdrive pedals, and in my gig, I just kept smiling because it sounded so damn great with them! And with second channel on the VRX22 that has another gain stage that acts as a built-in overdrive, I had yet another overdrive voicing to use, and I used all four either individually, or in many cases, I’d stack two or more together. And that’s a key thing with the VRX22. It can deal very well with stacked overdrives, retaining its touch sensitivity and note separation. Other amps I’ve used when stacking just can’t deal with the stacked overdrives very well.

In any case, this kick-ass amp is something you should consider. At $895, it’s simply tough to beat for a true hand-wired, boutique amp. And for those of you who already have Jeff’s PRX150-Pro or -DAG attenuator, you already know the build quality that goes into Aracom gear. It’s simply killer!

For more information on this wonderful amp, check out the VRX22 product page at Aracom’s web site!

Read Full Post »

Gear Review: VHT Special 6 Combo

Posted in 6V6, amplifier reviews, amplifiers, booster, GAS, gear, gear reviews, guitar, guitar gear, guitar gear reviews, guitar tone, guitarists, Guitars, Music, musicians, tagged , , , , , , , , , , , , , , on September 27, 2010| 7 Comments »

VHT Special 6 Combo
Summary: This is a hand-wired, solidly built tone machine that packs great features for an unbelievable price. The value proposition alone is enough to turn heads, but add superb tone to the equation and you have a winner!

Cons: None.

Features (as tested):

  • 6 Watts
  • One 6V6 Output Tube
  • One 12AX7 Preamp Tube
  • Volume and Tone Controls
  • Footswitchable Boost Mode
  • High/Low Power Switch (Pentode/Triode)
  • 10” VHT High-Sensitivity Speaker
  • 4, 8, and 16 Ohm Speaker Jacks
  • Mod-Friendly Eyelet-Type Board
  • Hand-wired In China

Price: $199 Street / $179 Street for Head

Tone Bone Score: 5.0 ~ Clean or dirty, this amp delivers the goods! The tone sweep is absolutely excellent giving you gorgeous, warm jazz cleans, to classic rock bite! Add the Hi/Lo power switch, and Push-Pull volume knob boost (also includes a footswitch), and you’ve got an amp that can live in a variety of musical genres.

About a week ago, I extolled virtues of the Marshall Class 5, and raved about how great it sounds. It’s a fantastic little amp, and I haven’t changed my opinion of it. But along came the VHT Special 6 and the game has completely changed. VHT raised the bar with Chinese-manufactured, low-cost, low-wattage amps by offering a hand-wired, super-well-built amp with fantastic features that can easily change the amp’s character for under $200 for a 1 X 10 combo.

I think the arrangements many gear manufacturers have made with overseas assemblers is great. Egnater is another example of a manufacturer doing it with great success. Design the gear here in the US, then partner with an overseas manufacturer to take advantage of their cheaper parts and labor, ensure that they meet a high standard of quality, then give the savings back to the customer. The top-of-the-line stuff can be saved for domestic production, but the stuff you want to get out to the masses can certainly be made elsewhere, and in much higher volumes and production rates. It’s a good model that many manufacturers have been following for years. I realize that I’m going to piss off some of the ultra-patriotic that will only buy stuff made in the USA; I myself prefer to buy US-made stuff, but it’s tough to argue with getting great tone for a great price, and that is EXACTLY what the VHT Special 6 and lots of other gear assembled overseas provide.

But enough toeing the political line. Let’s get into discussing the Special 6, shall we?

Fit and Finish and Features

The first thing I noticed when I first looked at the amp is how solid it looked. Picking it up revealed an amp that is no lightweight. I don’t know the exact weight, but the Special 6 is not lacking in heft. The cabinet is made of birch ply, and from what I could tell, fairly large transformers were used with the amp and those are heavy. Note that I’ve actually heard some conflicting information about the cabinet wood. Some say MDF, others say Baltic birch ply. Actually, it just doesn’t matter. The cabinet’s solid, and it works well as a resonance chamber for the speaker.

As far as cosmetics are concerned, the amp is covered in tolex with white piping around the front grille. The rear panel sports a partially open back that, like the Marshall Class 5, has a thin metal screen covering the opening. That’s a nice touch.

The control panel is super simple. You’ve got two chickenhead knobs for tone and volume, on/off switch, a three-way Hi/Lo Power / Standby switch (I dig that), and two input jacks for Lo and Hi input. The volume knob is a push-pull knob that when out, adds boost (sorry, not sure about the amount of boost). You can surmise just by these features that you can do a lot of tone shaping with this little beast. 🙂 The back panel has jacks for 4, 8, and 16 ohm speaker outs, plus a jack for switching between normal and boost.

Sound and Dynamics

Even with a 10″ speaker, the amp is capable of producing a variety of tones, from lush, Fender cleans, to ringing, AC15-like overdrive to gorgeous, smooth Plexi overdrive. I’m not kidding about this! Depending upon the pickup you’re using and where you set the tone knob, and other amp settings such as hi/lo input, pentode/triode mode, you can cover a wide range of tones! This is what is so SICK about this amp! It’s so damn versatile!

I played around with it in my studio this afternoon, getting ready to record some clips (which I’ll have in an upcoming article), and just for kicks, I unplugged the stock speaker and ran the amp out to my 2 X 12. Granted, there is a HUGE difference between a 2 X 12 and a little 10″ speaker, but in my experience, many low wattage amps still sound a little on the thin side even when going into a bigger cab; not so with the Special 6. It sounded big and ballsy; much more “big-amp-ish” than it’s diminutive power. That really came as a surprise, much like my surprise when I plugged the Reason Bambino into a big cab. It’s clear that just like the Reason guys, VHT didn’t want to just build a low-wattage amp. They wanted to build a great amp, period.

I also gigged with the amp in my weekly church gig yesterday afternoon, and it worked absolutely stellar! I kept the amp in high power mode, plugged into the high power input, set the tone and volume at 3pm each, then pulled the boost knob to activate the normal/boost footswitch. I didn’t use any effects at all as I just wanted the raw amp tones. I even tuned with my Peterson StroboClip so my signal from my guitar to the amp was completely direct. Note that even with a 10″ speaker, I still had to use an attenuator, and my trusty Aracom PRX150-Pro worked stellar with the amp.

During the gig, I mostly used the volume knob on my guitar to vary gain, whether in normal or boost mode. The amp responded so well to volume knob and pick attack. Even if I didn’t reduce the volume, and picked very lightly, I could clean up the sound. So sweet!

The only time I made any adjustments to the amp was when we did a song that I needed absolutely clean tones. I simply reduced the volume to around 11 am, then bypassed the attenuator. And the cleans were simply fantastic!

Made to Mod

Despite the fact that VHT says this amp is highly modifiable, I doubt that most people will do no more than swap tubes. I’ve seen some forum posts where people have made a couple of changes, but I’d say the majority of folks just won’t see a need to do that. But curious, for shits and giggles, I swapped out the stock 6V6 with a couple of different 50’s-era 6V6’s (GE and RCA). They each sounded beautiful as I expected, but quite frankly, they were just too smooth. The Chinese tube seems to be “hotter” and produces lots of harmonics; something my NOS tubes didn’t do. In my opinion, the Special 6 is meant to be a mini-rock machine. It won’t do really heavy stuff, but for 70’s and 80’s classic rock, it sits right in the sweet spot.

Overall Impression

I am thoroughly impressed with the VHT Special 6. Hand-wired, immensely versatile, plus fantastic tone for under $200? That’s tough to beat! And unlike other small, low-wattage amps that have only a volume and tone knob, the combination of inputs, low/hi power modes and boost make this an amp that can be used in a variety of ways. Big thumbs up, and 5 Tone Bones!

I’ll have clips in an upcoming article. Stay tuned!

Update: January 2, 2013

It has been awhile since I wrote the original article, and amazingly enough, I’m still using the Special 6. I did finally swap out tubes to 50’s era NOS for both pre-amp and power tubes, and I also swapped out the stock speaker and put in a Jensen Jet Electric Lightning. I use this amp frequently at my church gig where I don’t need a lot of volume since mic the amp and use the PA, and it is perfectly suited for that venue.

Even after all this time, I do have to say that I’m still thoroughly impressed with the tone of this little amp. When it’s cranked, and especially with the Electric Lightning speaker, the amp sounds SO much bigger than what its diminutive 6 watts would suggest. A lot of that has to do with how the speaker projects, but when cranked, that amp absolutely sings with tones of sustain and really sweet overtones. I love playing this amp with a Les Paul. The clean tones are gorgeous as well, and when I don’t hook it up to an attenuator, I just use pedals to get my distortion. From that perspective, the amp takes to pedals real well.

Finally, even with a simple, single EQ knob, the EQ works fantastically well with the amp. It’s kind of bright out of the box, so I normally just set the tone control to about 10 am. On some amps I’ve played, that muddies the tone a bit; but not with the Special 6. It simply makes the lower range stand out a bit more.

I’ve even been using the amp in the studio, over my DV Mark Little 4o and Aracom VRX’s (except where I need a heavier sound). It’s perfect for the studio.

Read Full Post »

Gear Review: The Marshall Class 5 Amplifier

Posted in amplifier reviews, amplifiers, amps, guitar, guitar gear, guitar gear reviews, guitarists, Guitars, Music, musicians, tagged , , , , , , , , , , , , , on September 14, 2010| 8 Comments »

Marshall Class 5 AmplifierSummary: Class A, Plexi goodness in a low wattage amp that packs a punch despite its smaller size.Pros: Great, ballsy tone that’ll just make you smile

Cons: None.

Features (as tested):

  • Power: 5 watts
  • Preamp tubes: 2 x ECC83
  • Power tubes: 1 x EL84
  • Controls: Volume, Treble, Middle, Bass
  • Speaker: 1 x 10″ 16ohm Celestion G10F-15
  • Headphone output
  • Extension speaker output
  • Dimensions: 19.48″ x 16.34″ x 9.05″
  • Weight: 26.46 lbs

Price: < $400 Street

Tone Bone Score: 5.0 ~ Even though I didn’t get to spend as much time as I’d like to play around with the amp, I was simply impressed by the tone that it delivers, and at a price point that makes it very difficult to ignore. While many low wattage amps can sound thin and tinny, the Class 5 with its generously-sized cabinet has a fantastic, rich tone.

On Low Wattage Amps

I love low wattage amps – those that are 10 Watts or less. I have a few. For years, people eschewed these super low wattage amps, and passed them off as mere practice tools. But I suspect they really didn’t understand what a super low wattage amp brings to the party. Low wattage amps such as the 5 Watt Fender Champ helped define the sound of rock and roll. Listen to classic rock tunes, and more likely than not, the venerable Fender Champ would be the amp providing the sound.

Today, more and more people are turning to low wattage amps – especially home recording enthusiasts, and even pros like Jeff Beck – to save their ears and to get crunch and grind at low volume levels. As a result of the increased demand, many manufacturers, boutique and mainstream alike, have responded and come up with a slew of low wattage amps. It’s a good thing and a bad thing. On the one hand, you have tons of selections, on the other hand; well, you have tons of selections. There are a lot of them out there and it’s tough to decide which way to go.

The shear amount of low wattage amps on the market is perhaps a big reason why Marshall waited so long to come out with its super own low wattage amp. Perhaps they were studying what the market responded to and what they could do to address what people might have fed back as improvements that could be made.

Enter the Marshall Class 5 amp. This amp was released in the UK near the middle of last year, and arrived here on our fair shores around November of last year. Amazingly enough, news about this amp has been relatively quiet. There hasn’t been all that much advertising that I’ve seen about this amp. The Marshall Haze amps have gotten lots of “rag” time, and the response to those amps has been generally positive. But I haven’t heard much about this amp other than user reviews. That’s too bad because after playing it, I have to say that I really dig it!

Classic, Killer Tone!

Is Marshall embarrassed about advertising such a low wattage amp? I certainly hope not, because I got a chance to play this amp today, and I just have two words to describe it: KICK ASS! Built upon the “Bluesbreaker”/Plexi pedigree, the Class 5 has all of that Plexi goodness in a low wattage combo. Make no mistake: The Class 5 packs a serious punch; maybe not maximum volume-wise (for a gig, this amp would need to be miked, but will provide plenty of stage volume), but if you’re looking for those classic Plexi tones in a low wattage solution, look no further!

Because I was in a shop, I only tested it with a single guitar: An Epiphone Les Paul Ultra. But the Class 5 delivered that cranked Les Paul through a cranked Marshall Plexi true to form. It was everything I expected to hear from a cranked Plexi, just at a lower volume. That really blew me away!

There’s really something special about that tone. My Aracom PLX18BB is a super-close replica of the Plexi 18, plus my good buddy has several Marshalls including an original JTM45 and Plexi 50, so I’m very familiar with that classic tone. While the Class 5 is just a tad grittier in its overdrive than its more powerful siblings (perhaps due to the new speaker), the rich harmonics and smooth overdrive delivered with “balls” with a gorgeous sustain is all there.

While it might seem from my description that this amp isn’t very loud, it’s plenty loud. You can even gig with it easily, even with the stock 10″ speaker which, by the way, has tons of volume and provides rich tone. I was actually expecting the amp to sound a bit thin due to the smaller speaker, but there was nothing thin-sounding about the amp.

Another reviewer mentioned turning the bass all the way down, because he thought it was flabby. I really didn’t detect a flabbiness to the bass, but I like a bright amp anyway so I had the bass EQ dialed down to about 8pm which is almost off.

All this tonal goodness is delivered by a 10″ speaker specially developed for the Class 5 by Celestion, the G10F-15. As expected, the 10″ really has an emphasis on the mid- to high-frequencies, but Marshall compensated for the lows by providing a spacious cabinet to act as a nice resonance chamber for the speaker. The result is a very balanced and smooth tone, if a little on the bright side. But bright is what Plexi’s are all about, and the Class 5 delivers on that swimmingly!

As far as my customary test clips go, sorry, this was a shop eval, so I didn’t record any. But if and when I get the amp, I’ll post some for sure!

Yikes! It’s Too Loud!

Hello… 5 Watts is loud. In fact the speaker’s SPL is rated at 97dB at 1 meter with a power rating of 15 Watts. People have complained that they can’t crank it up in the bedroom past 3 or 4. Yeah… welcome to the Non-Master-Volume club. But that’s the beauty of the Plexi in the first place! You need to saturate the power tubes as well as the preamp tubes to get that Plexi vibe. If you need to run this amp at bedroom levels, the best solution is to get an attenuator such as the Aracom PRX150-Pro.

I sincerely hope that Marshall doesn’t cave in to those complaining it’s too loud and add a master volume to the amp. To me, it doesn’t need and would take away from its vibe.

Made in the UK

This amp is constructed in the UK, amazingly enough. And what’s even more amazing is that it sells for less than $400! The shop I tested it at had it a retail price of $389! One would expect those kinds of prices to come from gear manufactured in Asia. But not this beauty. So to have a UK-made amp at this price point is truly remarkable! Then to get tone this good? OMG! Truly amazing!!!

Fit and Finish

This amp is extremely well made. The cabinet feels real solid, and nothing was loose. Apparently, earlier versions suffered from a buzz, but the unit I tested didn’t have that at all. In any case, I inspected the amp thoroughly – front and back-  and didn’t detect any finish flaws. The tolex was nicely molded down to the surface of the underlying wood, and there were no loose pieces of material. From what I could tell, 1/2″ ply was used for the cabinet, and that is good because I’ve found, at least from a purely qualitative perspective, that cabs built with 1/2″ thickness tend to resonate quite well. This obviously helps bolster the bottom end, and it does it nicely.

The rear of the cab is interesting in that it is partially closed with about a 4″ opening, covered by a metal grill. I suppose that this is so you don’t throw in the cable and accidentally puncture the speaker cone, but it may be purely aesthetic in nature. The rear grill is rather cool.

Overall Impression

I totally DIG this amp! It was fun cranking it up in the store this afternoon! Admittedly, the amp doesn’t really hit its sweet spot until the volume knob is about midway. But completely cranked up, it produces the tone I expect out of a Plexi! And even cranked up, it responds well to volume knob levels, so you can clean up the amp quite easily.

Compared to other super low wattage amps I’ve played, even my venerable ’58 Champ, this amp has tons of balls in stock configuration. With my Champ, I had to have an amp tech add a 1/4″ jack so I could run it into an external cab because the 8″ speaker really can be quite thin-sounding. But the Class 5 has enough balls and volume stock to not need any of that (though it’ll be fun to run this into an external cab anyway, which I plan to do).

Note that unlike other reviews, I really didn’t make mention of the amp being “Class A.” That’s a big deal with lots of folks, but to me, even though I understand the classification, it really doesn’t matter. What does matter to me is how the amp sounds, and it simply sounds killer. In my book, I couldn’t care less about an amp’s classification so long as I can get great tones out of it; and the Class 5 will certainly deliver on that!

As you might surmise, I’ll probably end up getting this amp. As if I need another! But it’s a great amp at a great price. That’s just plain tough to ignore! And note that this amp sounds so good stock to me that I really don’t see a need to swap out tubes unless they burn out (which they probably will considering I’ll be running the amp all out all the time 🙂 ).

Here are some cool video clips of the Class 5 in action:

Read Full Post »

Gear Review: Peavey Classic 30 Amp

Posted in amplifier reviews, amplifiers, amps, buying gear, EL84, GAS, gear, gear reviews, guitar, guitar gear, guitar gear reviews, guitarists, Guitars, tagged , , , , , , , , , , on August 2, 2010| 2 Comments »



Peavey Classic 30 Amp

Summary: Great looks, great sound, and at a GREAT price!

Pros: Beautiful cleans with a sweet, airy reverb, and smooth overdrive tones

Cons: This is a nit, but I was a bit annoyed at the labeling of Pre- and Post- volume controls on the Lead channel. Why not just follow convention? It’s obvious that “Pre” is volume, and “Post” is master. But when I first saw it, I wasn’t quite sure what to make of them until I turned the amp on.

Features (from the Peavey site):

  • 30 watts (rms) into 16 or 8 ohms
  • Four EL84s and three 12AX7s
  • 12 inch Blue Marvel® speaker
  • 2-channel preamp
  • Pre- and post-gain controls on lead channel
  • Normal volume control on clean channel
  • 3-band passive EQ (bass, middle, treble)
  • Boost switch
  • Reverb level control
  • Effects loop
  • Footswitch selectable channel switching and reverb
  • External speaker capability
  • Chrome-plated chassis
  • Classic tweed covering
  • Footswitch optional (not included)
  • Weight Unpacked: 39.50 lb(17.917 kg)
  • Weight Packed: 46.00 lb(20.865 kg)
  • Width Packed: 13″(33.02 cm)
  • Depth Packed: 21.5″(54.61 cm)
  • Height Packed: 19.25″(48.895 cm)

Price: $599 street

Tone Bone Score: 5.0 ~ Even my little nit couldn’t keep this amp from getting my top score. It’s simply a great-sounding amp!

I’ve been a big proponent of: If it sounds good to you, then brand and price don’t matter. This goes back to my very first guitar, a Yamaha FG-335 Acoustic that my dad bought me for my 18th birthday. I still have that guitar. But I remember a jam about 25 years ago I was having with my brother at a party. We were sitting in our living room, and we pulled out our guitars to have a jam and singalong. When I got my guitar out of its case, my brother remarked facetiously upon seeing its worn condition, “Dude, you should turn that into a beach guitar.” I just looked at him blankly and replied, “Nope. It may not look like much, but it has a great sound. Why the f&%k would I want to trash it? I’ll never get rid of this guitar!” Ahh… brotherly competition. 🙂 But I digress…

The point of me mentioning that is that nowadays with boutique gear being all the rage with “tube” this, “mustard cap” that, “hand-wired” this, etc., it’s so easy to dismiss some excellent gear that sounds absolutely KILLER! If you can get said killer-sounding gear at a fantastic price, then that’s even better. Now I admit that I have some expensive gear, but not once have I purchased gear because of a name or because someone told me to buy something because they love it. I suppose with this blog you might accuse me of doing just that, but I always suggest people try things out for themselves before making any buying decisions. Damn! Again I digress! Let’s get on the with the review, shall we?

Fit and Finish

Talk about vintage mojo! The first time I saw this amp in a local shop, I was stunned by its looks. With its vintage-style front panel and dark brown cloth grille, and tweed covering with chrome-plated corner protectors; what’s not to like? Weight-wise, at 40 lbs, it’s not light, but it’s also not a behemoth that you can’t lug easily into a gig. And don’t let the small size of its cabinet fool you: It’s quite resonant, but more importantly, its size doesn’t make it unweildy in the slightest. Simply put, the Classic 30 just plain looks great!

How It Sounds

In my test, I used a Squier Classic Vibe Tele 50’s, a Custom Shop Strat, and a Les Paul Standard. I always start out all my tests with the amp clean, and playing finger-style. No matter what guitar I used, the cleans were absolutely spectacular. I love EL84 cleans. They’re sparkly and chimey, and the Classic 30 simply delivered that EL84 clean goodness! The single coils sounded chimey as expected, but I totally dug the cleans with the LP! Adding a bit of grease with the reverb brought out the  lush, deep tones of the Les Paul nicely. I believe the reverb is a digital reverb, but who the hell cares? It sounds incredible! I guess that’s the point I was trying to make above. If something works well, it doesn’t matter what it’s made of.

As far as overdrive is concerned, as its name implies, the Classic 30 isn’t going to get you modern high-gain overdrive tones, but there’s tons of overdrive on tap. Once I dialed in the Pre and Post volume control balances, I was able to get nice overdrive tones that weren’t at all harsh, no matter how hard I pushed the amp. Since I was in a shop, I didn’t get a chance to record clips, but here are some clips from Peavey:

Clean

Clean, Reverb

Channel 2 Flat

Channel 2 Preamp

Channel 2 Boost

As you heard, great tones out of this little beastie. Even completely dimed, you don’t get over the top overdrive, but for classic rock and blues, this is a GREAT amp. That Blue Marvel 12″ speaker works great in this cab!

Overall Impressions

At $599, this amp looks and sounds as good as many boutique amps I’ve played. I love this amp, and it’s definitely going to be added to my amp collection. 🙂 I didn’t get to try out the effects loop, but I love the fact that it has one. It just adds to its versatility. If you’re looking for a vintage-style amp for a great price, this is definitely an amp to consider!

Read Full Post »

I Wish I Never Met Jeff Aragaki

Posted in Guitars, tagged , , , , , , , , , , , , , on July 18, 2010| 4 Comments »

…of Aracom Amplifiers. Let me tell you why:

  • Jeff is super-smart, and makes incredible devices like the PRX150-Pro.
  • Jeff’s amps are to die for. If you’re looking for anyone who “gets” the Marshall vibe, it’s Jeff. I have three of his amps, and am waiting for his upcoming JTM-45. I’ve played the prototype, which has period-correct components, down to original mustard caps, and that amp just oozes vintage Marshall goodness.
  • Jeff is a gear freak like myself; but not just any gear. He’s nutso for vintage Les Pauls and Les Paul Jr.’s – he has many.

And the last point is the problem: Because of Jeff, I’ve gotten totally hooked on Les Pauls and Les Paul-style guitars! Take, for instance, this guitar below:

Jeff dropped off this guitar at my house yesterday for me to evaluate. It’s a gorgeous, relicked ’59 Les Paul replica that has been meticulously copied by a master luthier, using old wood and proper hardware. Even the glue used is the same as the original, and the lacquer finish is not a plasticized lacquer – it’s the real deal. It doesn’t have original PAF’s, but the pickups have been wound to original output specs. The guitar’s original owner sourced the wood from a distributor specializing in high-end furniture and guitar wood, had a master luthier shape it, then sent the guitar to RS Guitar Works for finishing, and they confirmed their work with a certificate (apparently, they’re one of the best in the business for doing conversions and replica finishing). The net result? According to Jeff, this is about as close as you can get to the real deal without paying hundreds of thousands of dollars (the “cheapest” one I’ve ever seen was a slightly modded one for $275,000).

After playing with it for a couple of hours yesterday, I’m now REALLY hooked! I personally don’t know what a real ’59 sounds like, but I’ve done some research on what to expect with respect to response, dynamics, and tone. Mind you, I’m not a cork-sniffer, but all I know is that this puppy sustains for days, and the wonderful bloom that ensues from holding a note due to the resonance of the tone woods is ever-present. As for the tone, it’s absolutely gorgeous! Heavy on the upper-mids without being biting, with inspiring cleans and smooth drive.

The neck has also been “pleked” so it’s an absolute dream to play! I didn’t have to spend much time at all familiarizing myself with it. No wonder ’59’s are so highly sought-after! These were special guitars, and this replica captures everything I was expecting to feel and hear!

Circling back to why I wish I never met Jeff Aragaki, that guy gets me gassing for gear! ALL THE DAMN TIME!!! As I mentioned above, I’m hooked on vintage and vintage-style Les Paul’s because of him!

As if Jeff’s Les Paul obsession is bad enough, as I said, Jeff’s amps are to die for! He is so talented! I haven’t played an Aracom amp that I haven’t absolutely loved. And being that I get to try out all his new designs, all I can say is that this dude knows his stuff about amplifier technology and electronics! His amps rock!

With respect to his electronics genius, just look at the PRX15-Pro attenuator. Jeff has employed technology that NO ONE has employed. Other manufacturers may brag about their products and how they may have spent years working on their designs. I won’t take that away from them, but they just modified existing designs. Jeff discovered a completely different way to attenuate, and it’s no small wonder that players like Joe Satriani and Doug Doppler love this device!

Actually, I’m very glad I’ve befriended Jeff. He’s also just an all-around great guy. He’s incredibly humble and self-effacing, and his warmth and friendliness just draw you in. I guess I have to chalk up my GAS to lack of self-control. But with a friend like Jeff, it’s hard to control it. 🙂

Read Full Post »

« Newer Posts - Older Posts »