Feeds:
Posts
Comments

Posts Tagged ‘gear reviews’

Review: Wegenpicks Trimus 350

Posted in Guitars, tagged , , , , , , , , , , , , , , on July 17, 2010| Leave a Comment »

Well you know me, I LOVE thick picks (2mm and above), and you probably also know that it’s dangerous for me to go to a guitar store because more likely than not, I’m going to walk out with something. 🙂 Today was no different…

My good buddy, Jeff Aragaki, of Aracom Amplifiers came over to the house to drop off some gear for me to evaluate: a ’59 Les Paul replica (I’ll have a review of that guitar in a few days after I’ve played it a bit) and a new Jensen 1 X 12 speaker. In turn, I was going to give him a pair of Groove Tubes Gold Series 6L6’s (GREAT f-in’ tubes). After that, we’d go get some lunch and catch up as we haven’t hung out in awhile.

We ended up going to a great Japanese curry place in downtown Los Altos. After lunch, we got in my car and Jeff said, “It’s too bad there’s not a guitar shop around here.” I of course know where all the shops are and replied, “You know, there’s one that’s about 10 minutes away. Let’s go there.” So I took him to Gryphon Stringed Instruments in Palo Alto. It’s a high-end acoustic guitar shop that has been around for years, and in addition to having a great stock of Martin, Collings and other high-end acoustics, plus a limited selection of electric guitars and some VERY nice vintage stuff including a 1960 Telecaster for $17,500,  they have high-end picks. It’s the place where I discovered Red Bear Trading pics.

I did have a motive for going there as I needed a good stage stand for my guitar, and Gryphon carries the very awesome Hamilton guitar stands. After my guitar almost got knocked over by a gust of wind at my gig yesterday, I knew I needed to get a good stand, and it was a good excuse to go there with Jeff so we could jam for a bit as well.

So the sales guy rang up my stand, and then I made the mistake of looking into the case to see what picks they had. Mistake. I didn’t know they carried Wegen picks, and there they were: Three cases full of ’em. I couldn’t resist. I had to try them out. Now I had learned of Wegen picks from various forums, but never had the occasion to play one until today. So the verdict?

Well, I liked the material enough as I ended up getting the Trimus 350, which is 3.5mm thick. That’s just a bit thinner than my V-Picks Snake. So what’s so special about this pick that I was willing to drop $20 on it?

First of all, it has a different feel than V-Picks or the Red Bear picks. The material feels softer than either the Red Bear Tortis and the V-Picks acrylic, which makes for a nice, smooth tone. The points are beveled, so you do get a snap that brings out the highs.

Now Wegen claims that the material feels a lot like real tortoise shell. I’ve felt real tortoise shell, and this feels nothing like it. But that’s not a bad thing. What really turned me on about this pick is really the feel. It’s not as smooth in feel as either the V-Picks or the Red Bear, which have glass-like finishes. In contrast, the Wegen pick has a bit of a texture. But amazingly enough, that doesn’t translate to stickiness on the strings. Whatever Wegen I tested, it just glided over the strings.

Another nice feature of the Wegen picks I tested were the grooves cut into the body of the pick. Add to that a depression in the body, and what you’ve got is a pick that you can really hold onto!

I chose the Trimus 350 because I like the shape – it is very similar to my V-Picks Snake and my Red Bear B-Style Gypsy Jazz. It’s also thinner than both – not by much – but still just a bit thinner. But Wegen has a lot of different picks. If you get a chance, check one out!

Read Full Post »

DBZ Guitars Receives “Best In Show” Award at 2010 Summer NAMM

Posted in GAS, gear, gear announcements, gear reviews, guitar, guitar gear, guitar gear reviews, guitar reviews, guitarists, Guitars, Music, musicians, new gear, tagged , , , , , , , , , , on July 6, 2010| 4 Comments »

Even though I got this news via a press release, it doesn’t surprise me at all that DBZ won the Best In Show award this year. I’ve been quietly following DBZ since they hit the scene, and I’ve appreciated what Dean Zelinsky  (founder of DBZ and famous for Dean Guitars) has been trying to accomplish with his guitars from the start; that is, build great looking, great sounding, and great playing guitars at a GREAT price. Yeah, that’s a common formula, and lots of people try to do that, but Dean has accomplished that.

Take, for instance, the Imperial Premier model to the left. I had the chance to hold and play around with one of these exact models in Transparent Wine a couple of weeks ago (didn’t get to plug it in, though hopefully the DBZ rep will let me borrow one for a review). The Imperial has some classic styling – it’s shaped very similarly to a Gibson SG, but that’s where the similarities end. If you look at the picture to the right, you’ll see how incredibly thin the body is. That makes for a super, super, super light weight. All I could say when I first picked it up was, “Wow!”

Now you might think that that would never fly, but I have to tell you, that guitar felt absolutely wonderful, and I could feel the string vibrations resonating through the body as I played. The soft v-shape of the neck stands for Very comfortable. The fretboard is nice and smooth. DBZ calls it “ebonized” rosewood – not sure what that means, but it’s as smooth as ebony, and I just love the feel of ebony fretboards.

Unfortunately, I didn’t get a chance to plug it in because I was busy picking up my Fishman Solo Amp. But just based upon my initial inspection, and just holding it it in my hands, if I wasn’t getting the Fishman, I wouldn’t have let the rep leave the shop with the guitar. Yup, I was THAT impressed! Even the store manager was completely blown away by the guitar. He’s a jazz player, and while he said he prefers archtops, he loved that guitar.

Here are some specs:

  • Construction/Scale: Set Neck 24.75″
  • Body: Mahogany/Maple Top
  • Flamed Maple Top
  • Natural Scrape Binding
  • Fingerboard: Ebonized Rosewood
  • Neck: Mahogany Soft V Neck
  • Frets: 22
  • Inlays: Premier Series
  • Pickups: DBZB/DBZ5
  • Electronics: Vol/Tone/3-way
  • Tuners: Grover
  • Hardware: Gold
  • Bridge: DBZ Custom Stop Tail

Pretty nice features. You can see more pictures and other information on the DBZ site.

Here’s the real kicker: You can get this guitar for $649 online!!! Fat Tone Guitars outside of Chicago has these in stock. So how is the price so low? Simply put, it’s due to technology. Dean Zelinsky isn’t shy nor embarrassed by this blatant use of tech to build guitars. And why not? With computerized routers, you can ensure build consistency. Plus, I believe all the heavy work is done overseas, so that keeps the prices down. Even though I try to stick to US-made gear where I can, in the end, geographic location is far less important to me than how the gear plays and sounds.

DBZ is still trying to build its dealer base, but I encourage you to check one out if there’s a shop near you.

Read Full Post »

Report: ’58 Fender “Tweed” Champ

Posted in Guitars, tagged , , , , , , , , , , , , , , , on July 5, 2010| 1 Comment »

I know, not a very good picture, oh well…

In any case, I recently won this amp in an eBay auction. As soon as I got it, I turned it over to Jeff Aragaki of Aracom Amps for him to inspect it, clean it up, and make it “safe.” The amp was in excellent working condition, considering it’s 52 years old, but to be safe, I wanted to make sure there was nothing amiss.

One of the first things Jeff looked at were the capacitors. Visual inspection didn’t reveal any leaks, but they needed to be measured to ensure that they were still able to keep a charge. Amazingly enough, they were still measuring well within operational tolerances, and none had to be replaced, which Jeff said indicated that the amp was being used. With those old paper capacitors, if they sit for a long time without use, they’ll eventually leak acid. But these were in great shape!

The next thing Jeff checked was the speaker. Interestingly enough, the speaker was a replacement, and not only that, it was a 16 ohm speaker, which actually attenuated the amp a bit, so I had Jeff replace the 8″ speaker with a new ceramic speaker.

Since the amp used a two-prong electrical plug, I asked Jeff to upgrade it to a three-prong medical-grade plug. Unfortunately, the way the amp was designed, doing that would require playing with the heater voltages, and while that wouldn’t necessarily harm the amp, it may have had an effect on the tone – not a good idea. So I just had Jeff replace the cord, which was in decent physical condition, but according to him, wasn’t carrying a full load of current to the amp.

In addition to cleaning it up and making sure it was in good working order, Jeff wired up an A/B switch box to the amp, so I could flip between using the internal speaker and an external cabinet (which is how I’ll normally play this amp). Jeff did this to avoid having to install a 1/4″ jack which would alter the amp from its original condition. Being a vintage gear collector, Jeff thinks about that stuff… This amp is going to be a player, so that wasn’t much a concern to me, but he kind of insisted, just in case I decide to sell it later.

Finally, since the amp didn’t have a back plate (which accounts for the great price I got it for), Jeff cut a nice 1/2″ ply board to protect the chassis. We’ll do a proper back plate with a tweed cover later, but I wanted to start using the amp right away, so we’ll do that as a future project.

Gig Report

With the amp complete, I played it all week to get used to how it responded. Now that I have one of these, it’s no small wonder why these have been long-time residents in studios all around the world. Hooked up to my 2 X 12, loaded with a Celestion Blue and Gold, the amp’s voicing is super rich, if a little on the bright side. But no matter. The cleans are absolutely incredible! They ring with a vintage chime that at least to me, invokes a visceral response in me that’s hard to explain. It’s a classic Fender clean, and through my 2 X 12, the cleans resonate and float through the air! As far as dirty is concerned, the Champ is no high-gain amp. Overdriven, it’s a dirty grind, perfect for blues- or classic-rock tones.

The Champ is also incredibly pedal friendly. I hooked up my super-versatile Doodad Guitars Check-A-Board RED overdrive/booster up to it, and the amp just responded! The overdrive is wonderful on this pedal, adding great sustain without overly compressing the signal, but where the pedal really worked with the Champ was with the booster. Slamming the front-end of the amp, I was rewarded with a gorgeous, smooth overdrive tone. Again, I thought to myself, this is why this little monster has been on so many songs over the years!

Yesterday, I took the amp to my church gig. Being the 4th of July, we had a skeleton crew: Just one other guitar besides myself, but no matter, I wanted to play it live. For this gig, I just used my custom Aracom 1 X 12 with a Jensen P12N, and I played my “hybrid” Fender Stratacoustic Deluxe through it. Despite the fact that I was ostensibly playing an acoustic guitar through the amp, the tone was absolutely natural. I was like, “This really shouldn’t sound that good, but I’m amazed at how it sounds!” Granted, the Stratacoustic is more like a hollow-body electric than an acoustic, but the Champ just took its natural voice and amplified it beautifully.

Once I have my studio set up again (just finished construction on the house, so I lost my recording space temporarily), I’ll make some recordings!

If you live in the Silicon Valley area and need some amp work, though Jeff sells his own line of amps, three of which I own, with a fourth on the way, Jeff is one of the best amp techs I’ve ever worked with and he’ll hook you up! He thinks of things I would’ve never thought of! Check out his site at http://www.aracom-amps.com. Needless to say, he is also the creator of the best attenuator on the market, the Aracom PRX150-Pro.

Read Full Post »

New Gear: Aracom-DAG PRX150-DAG Power Attenuator

Posted in Guitars, tagged , , , , , , , , , , , , , , , on June 29, 2010| 2 Comments »

The venerable “Destroy All Guitars” shop has teamed up with Aracom Amplifiers to come up with a new version of the fantastic Aracom PRX150-Pro. Sporting a smaller cabinet (sorry, not reduced weight), and a couple of very cool new features, the $785 PRX150-DAG is the answer to anyone who wants to go to the extreme in transparent power attenuation.

Here are the features:

* Proprietary SRT Power Attenuation Technology
* Six levels of step attenuation, plus a continuously variable attenuation control (bedroom mode)
* 40dB of attenuation–attenuates 150 watts down to .015 watt
* 150 watt power rating
* Independent input and output impedance selector switches:
– from the amplifier and into the attenuator, select from: 2, 4, 8, 16 ohm
– from the attenuator and to the speaker cabinet(s), select from: 2, 4, 8, 16 ohm
– uniquely allows 16 possible Input and Output impedance combinations
* Hi Frequency Cut Filter with a True Bypass Switch
* Features a Load setting and is equipped with a Line Out Jack and Line Out Level Control
* Rack Mount Option
* Handwired in the USA

The two notable features are the Hi-Cut Filter, and the increased attenuation down to -40dB attenuation. With respect to the high-cut filter, some people had mentioned that they heard a high-frequency artifact coming through when they hooked up the original PRX150-Pro. I myself have never heard it, though I suppose anything’s possible. In Jeff Aragaki’s (of Aracom Amps) words:

The PRX150-DAG is equipped with a High Frequency Cut switch, that rolls off the highs above 6KHz, that some users might find useful with amplifiers that have a pronounced high end frequency response. Some guitarists go to great lengths to control the high end response of their amplifier, by carefully selecting speakers, tubes, and other components to roll off the highs. Now with the PRX150-DAG, a guitarist might not need to rely on changing these components; the high cut filter switch allows the flexibility of rolling off the high end or not. The true bypass switch allows the filter to be completely bypassed, providing the full frequency response of the attenuated amplifier to pass through to the speakers.

The other great feature is the Min/Max variable attenuation modes Jeff has introduced. Minimum attenuation mode is the traditional -16dB down to about -30dB variable attenuation, whereas the Maximum variable attenuation mode goes from -27dB to -40dB. With a 100 Watt amp, that’s taking down the output power to .015 Watt!!! Wanna have full dynamic response at bedroom levels with your 100 Watt amp? Look no further!

The Aracom-DAG PRX150-DAG is available exclusively through Destroy All Guitars. Check it out!

Read Full Post »

Quick Review: Groove Tubes GT-6L6GE US Re-issues

Posted in 6L6, GAS, gear, gear reviews, guitar, guitar gear, guitar gear reviews, guitar tone, guitarists, Guitars, Music, musicians, NOS, tubes, tagged , , , , , , , , , , , , , on June 18, 2010| 1 Comment »

If you read this blog with regularity, you know that I love NOS tubes. Who knows? Maybe I’m being a cork-sniffer, but the significant impact NOS tubes have had on my amps has led me to preferring them over new production tubes. Unfortunately, NOS tubes are getting scarcer and scarcer, so I suppose that eventually I’ll  have to get new production tubes.

Now a company that I’ve tended to steer away from is Groove Tubes, mainly because they’re just re-labeler of various OEM tubes. They just measure voltage, match ’em up, relabel them and sell them as their brand. Nothing wrong with that, but I haven’t met a Groove Tubes tube that I’ve liked, until I discovered the Groove Tubes GT-6L6GE Re-issues.

Before I go on, I should clarify that I’m not talking about the current production 6L6GE’s, which are assembled overseas. The tubes I’m talking about were made in the USA up until about 2003, as far as I can tell.

What makes these tubes special is that they’re constructed of NOS materials (except the glass), and to the same specs as the original GE 6L6’s of old. Plus they were constructed in Southern California, so the quality is incredible. These tubes rock! To be honest, I’m not sure of all the details of their production, but I got the information from Brent Jesse @ audiotubes.com who recommended them to me.

I bought two sets so I could have a spare set, and have been in tonal heaven with my Hot Rod Deluxe! The cleans are lush and deep, and the overdrive is creamy smooth. I have other GE power tubes, and I’ve gotten used to their smooth distortion. These GT-6L6GE’s are no exception! In addition to their smooth breakup, they also don’t compress much, which is another thing I just dig. I prefer a more open distortion.

I compared these to both JJ’s and regular Groove Tube 6L6GT’s, and these just blow them away. The JJ’s and GT’s have nice, clear cleans, but forget about their tone when cranked up. The tone is harsh and gritty, even if I bias them a little hotter than spec; whereas the 6L6GE’s remind me of the breakup I get from my Plexi clone – without hot biasing! Amazing!

As these are no longer in production (don’t confuse these with the new 6L6GE’s), they’re a bit more expensive than the new production 6L6GE’s; $80 per pair as opposed to $55-$58 a pair. And because they have the same labeling as the new ones, it’s hard to tell them apart. So I recommend that if you want to get a pair, get them from a source you trust. As I mentioned, I get them from Brent Jesse Recording and Audio, and having purchased several tubes from him, I trust him implicitly.

All that said, I will be getting a set of the new production tubes to make a comparison, as they are also made with NOS materials, though assembled overseas. Who knows? They may just sound killer as well!

Read Full Post »

Gear Review: Fishman SA220 Solo Amp

Posted in amplifier reviews, amplifiers, amps, Amps/Amplification, GAS, gear, gear reviews, guitar, guitarists, Guitars, Music, musicians, performing, tagged , , , , , , , , , , , , , , , , on June 17, 2010| 37 Comments »


Click to enlarge

Click to enlarge

 Fishman SA220 Solo Amp

Summary: Compact and weighing in at just 25 lbs., the SA220 Solo Amp is an ideal PA solution for the solo acoustic guitarist/vocalist, but it’s versatile and loud enough to be used as a PA for a band (if you have a couple of them).

Pros: It may not have the Bose name, but I’d put this up against the L1 Compact system any day. With built-in, independent, 3-way EQ, and a variety of other features, if you’re a solo acoustic artist, you owe it to yourself to check this unit out! I got it set up in less than a minute!

Cons: None

Features:

  • Drivers

    • – Six 4″ mid-woofers, patented dual gap, high excursion design, neodymium magnets (200W)
    – One 1″ neodymium soft dome tweeter with level control (20W)

  • Auxiliary Stereo Input with Level control
  • Four Digital Reverb effects with master level
  • Balanced XLR D.I. outputs for both channels and main mix
  • Independent effect loops for Channel 1 and Channel 2 (OMG!!!)
  • Unique Monitor I/O for improved on-stage ensemble monitoring
  • Mute with remote footswitch input
  • Tuner Output
  • Ships with Stand and padded Carry Bag (w/ wheels)
  • Dimensions: 41.5″ H x 5.6″ W x 6.6″ D
  • *Weight: 25 lbs without Stand, 35lbs with Bag and Stand

Price: $999 Street

Tone Bone Score: 5.0 ~ Talk about ease of use! As I mentioned above, I got the SA220 set up in less than a minute! And my Yamaha APX900 sounds absolutely killer through this, not to mention the great clarity of the vocals. This is a winner, folks!

Year over year, I play between 100 to 150 gigs a year, with about half of them as a solo acoustic act. My solo gigs have consisted mainly of my weekly restaurant gig, but I do lots of weddings and special events throughout the year as well. Of late, the restaurant I gig at moved my act outside in a public patio area as the weather is gorgeous.

To make a long story short, even though the restaurant has a decent PA system, I ended up bringing my own PA last week, which was the first week we did the outdoor show. That worked pretty well, and my PA has a great sound. But it also made me realize that the old mixing board, and big 300 Watt speakers was just too much gear to haul around. Even if I ended up using the restaurant’s PA, which is a nice one, I’d still have to lug the board and speakers and stands down from the office upstairs. Enter the Fishman SA220 Solo Amp.

Plug It In and Go!

I finally received my SA220 today after having to wait for a couple of weeks for it to arrive (had to be ordered). So when I got home, I knew I had to try it out to see how it sets up, and of course, to work out kinks before I gig with it. There’s nothing worse than fighting your rig or sound DURING a gig – especially when you’re solo.

The guys at the shop assured me that Fishman’s claims of easy setup were true. I am now a believer! I had the SA220 set up in exactly 42 seconds!!! That didn’t include hooking up my pedal board, guitar, and microphone, but I had the system on its tripod stand and plugged into power, ready to go, in that short amount of time. That just blew me away! Plus, everything you need to get up and running fits into a single carrying unit that consists of two bags: One for the array/PA, and one for the tripod that buckles to the main bag. Talk about convenience! Fishman really had the solo artist in mind when they built this!

How It Sounds

For my audition, I just plugged my guitar into the SA220 directly, and hooked up my microphone. All I can say is that the sound is spectacular! I was actually concerned about the bass response of the unit, but apparently Fishman distributes the bass response among the six main mid-woofers. It may not get boomy with the bass, but the sound is absolutely rich, and vocals are clear and full. Normally, I use a DI to go into a board – and will probably do the same with this unit, but my guitar sounded clear and natural and full plugged in directly without those annoying high-end transients and flattened tone that is so annoying with plugged in acoustics. Admittedly, the ART system in my Yamaha APX900 has quite a bit to do with that, but Fishman really knows how to condition sound.

At first, I had a bit of a problem with feedback, but setting the phase switch and tweaking the anti-feedback knob (it’s a variable frequency notch filter designed to subdue a resonant peak – just turn it to where the feedback gets reduced or eliminated – very cool), and attaching the rubber sound hole cover on my guitar took care of the feedback problem.

Luckily no one was home when I tested the SA220. I set it up outside so I could see how it performed. Damn! Even with just 220 Watts, the SA220 is LOUD!!! I had the Master volume set at around 10 am, and that will be enough to fill the large patio space I’ll be playing in tomorrow! It’s not a stretch to say that the SA220 can cover a lot of venues.

As far as listening angle is concerned, the SA220 disperses the sound incredibly well! Even at extreme angles, where I was almost even with the array, the sound was clear with good volume. Of course, narrower angles are better, but this unit will have no problem playing in the open space I’ll be playing.

Talk About Bang for the Buck!

The sound is great, but I have to tell you, I was ready to get the Bose L1 Compact, which is a great unit, but the mere fact that if I wanted more EQ control and other features, I’d have to spend another $499 really soured my taste for the unit. On the other hand, Fishman has packed all sorts of features into the SA220 that make it hands-down the better value. Independent 3-band EQ for each channel, phase and anti-feedback control, 4 types of digital reverb, a mute switch (that is REALLY handy!), independent balanced XLR outs to go into a board, and my favorite feature: independent effects loop for each channel! You just can’t argue about with what comes built-in on this unit!

Overall Impression

It’s hopefully obvious that I love this unit! For me as a solo artist, it’s a true game changer! It’s light and versatile, and the sound is spectacular. What more could I ask for?

Read Full Post »

On the Avatar Traditional G12H Custom 2 X 12 Cabinet

Posted in Guitars, tagged , , , , , , , , , , , , on June 14, 2010| 2 Comments »

Having played with a 1 X 12 for quite some time, which has served me incredibly well for both studio and stage, I had as of late been wanting a bit more bottom end response, especially live, but without sacrificing my ability to naturally cut through the mix when the band is going all out; that is, cut through by virtue of EQ as opposed to volume. I suppose I had just been after a bigger, richer sound.

So I called my close friend Jeff Aragaki of Aracom Amps – actually several times – to talk about what might work well my Aracom Amps. He’s been testing several different speakers and speaker combinations lately, and who better to strategize with than the manufacturer of my amps? Lately he’s been really big into the Celestion line, and as he knew I love that classic alnico magnet sound, our conversations started turning towards the virtues of the Celestion Gold and Celestion Blue speakers.

I myself had never heard either of those speakers before – well, except for a brief time at a guitar shop through a 65 Amps 2 X 12 – but Jeff has been raving about them, and as he and I like the same kinds of tones, I broke my own rule of auditioning gear before I buy it, and asked Jeff if he could put a cabinet together. He said he could construct a custom one for me but that would take some time, or he had a few Aracom re-labeled Avatar cabs in his workshop and he could load a pair of speakers into one of them. From the title of this article, it’s obvious I went with the latter alternative.

For those unfamiliar, Avatar Speakers has been around for quite some time, and the company is fairly well-established in the guitar and bass community. I used to think they’re a manufacturer, but they’re actually a distributor of cabs as opposed to being a direct manufacturer, so they buy in bulk and have insanely great prices on cabinets, and they’re all great quality.

The G212H Custom is a fantastic cabinet, measuring 21″ H x 28.5″ W x 12 ” D, and made of 18mm 13-ply Baltic Birch. It’s not a small cabinet, but that’s a good thing as its size provides a resonance chamber that really brings out the bottom end – even in a semi-open-back configuration like mine, as shown in the photo of the back of the cabinet to the right.

The build quality of the G212H is excellent. The corners have nickel-plated protectors, and the cab itself is extremely sturdy. The grille cloth is actually screwed in, as opposed to being attached with velcro, and that will eliminate buzzing that can happen with velcro-attached grille cloth.

The only pain that I anticipate with this cab would be swapping out speakers, which I probably won’t do often. But the speakers are front-loaded, which many players prefer, but in order to swap, you have to remove at least two of the corner protectors so you can remove the grille cloth frame from the front of the cab. That’s not really too difficult, but it’s a lot more involved than just unscrewing the speakers like you would from a rear-loading configuration.

As far as speakers are concerned, I’ve had the cabinet configured with a Celestion Gold and a Celestion Blue. The Blue has a nice, smooth, early breakup while the Gold provides a bit more bite on the top-end and a really nice bottom-end response. What a combination! The end result is a slightly scooped tone, and that roomy cab creates an almost reverb-like effect. I’ll have sound clips in the next few days.

Overall, I’m just loving the sound that this cabinet produces. I got my wish for a big, smooth sound for sure!

The Avatar G212H Custom gets a 4.75 only because speaker swapping is a bit of a pain. But from a pure performance standpoint, it gets a 5.0.

Read Full Post »

It’s Always Nice to Be Surprised…

Posted in Guitars, tagged , , , , , , , , , , , , , , , on June 8, 2010| 4 Comments »

I broke the guide post on one of the 6L6 tubes in my trust Fender Hot Rod Deluxe awhile back, and even though the tube still worked just fine, I used it as an excuse to get a new set of power tubes. So after doing a search around the Internet for a new set of 6L6’s, I found myself on Brent Jesse Recording’s (audiotubes.com) site, looking for some NOS replacements for the JJ’s I had in there.

Not knowing what to purchase, I called Brent up, and asked for his recommendation. Surprisingly enough, he recommended a set of Groove Tubes. I said, “Groove Tubes? I can’t stand ’em.” But Brent explained that these particular Groove Tubes were not the imported, relabeled stuff from Russia or China. They’re re-issues of RCA and GE black plates made from NOS materials and constructed here in the US. Intriguing. I’ve purchase a few sets of tubes from Brent in the past, and he has never steered me wrong, so I decided to take a chance and get a pair.

The tubes arrived yesterday so of course, I just had to install them. What’s the verdict? They sound absolutely KILLER! The big test for me – especially with NOS tubes – is to run them full out to see how they break up. The problem I’ve had with late model power tubes in general (but especially with 6L6’s) is that they feel stiff and the breakup can be a bit harsh.

To me, NOS tubes have always felt much more smooth and dynamic. These Groove Tubes tubes are a huge exception to late model tubes. I can’t believe just how nicely these re-issues break up! The distortion is creamy smooth and slightly compressed with nice bloom and sustain without being too squishy – just how I like it! Caveat: They’re not cheap. These tubes are $80 for a matched pair, but they’re worth every penny! I just ordered a second set for spares since these tubes are limited quantity. They may not necessarily be NOS tubes, but as they’re made with NOS materials, there is definitely a limit. So if you’re looking for new production tubes that sound absolutely fantastic, you gotta check these out!

A word on the Fender Hot Rod Deluxe

It’s my contention that the Fender Hot Rod Deluxe is one of the most underrated amps on the market. Okay, I admit it: Stock it doesn’t sound all that good. But with the right tubes and the right speaker, it can sound incredible! Granted, a year or two ago, I wouldn’t have even considered buying this amp because of the huge price hike. I got mine on special for something like $550 in a blowout sale a few years ago. But the prices aren’t all that bad now. They’ve come down significantly from their nearly $900 price tag, and you can find them for around $649. Admittedly, it’ll probably cost $300-$400 more in tubes and replacement speaker, but what you get is an AWESOME amp. I’ll have clips in a few days.

Read Full Post »

Mini-Review: Mad Professor Deep Blue Delay

Posted in Guitars, tagged , , , , , , , , , , , , , , on June 1, 2010| 3 Comments »

This is a “mini-review” only because I wanted to provide feedback on it after using it, and because I only used it in a limited way. The Mad Professor Deep Blue Delay is a digital/analog delay pedal meaning it is a digital delay with an analog direct signal path – or as Mad Professor puts it, the direct signal path is made of analog amplifiers with no filtering. In other words, it’s supposed to be transparent with no tone coloration.

Okay, I’ll just cut to the chase. This is about the sweetest delay pedal I’ve ever played through! It can do really subtle, ambient stuff, but also nicely textured “The Edge-” like delay. But no matter where you set it, the delay never turns to mush. It retains your tones, and is super-sweet.

At first glance, you might think this is a typical analog delay pedal, but it is a digital delay, and thus nowhere near as dark as I’ve heard analog delay pedals, which has kept me from getting an analog delay in the first place. I just don’t get into the really dark, brooding type of delay. But I’d easily consider the Deep Blue Delay. It’s simply killer!

I only used it with a Yamaha APX900 acoustic to add some subtle ambient textures to my finger picking. I was also running the signal into a nice little Genz-Benz Shenandoah JRLT. Level was at about 10 am, Delay about noon, and Repeat at about 11 am. I wanted to get just a subtle hall-like echo. All I can say was that it performed astounding well! Combined with that sweet ToneCandy Spring Fever reverb pedal, and I was awash in ambient heaven!

I did play with higher levels of each setting, and was amazed at the overall clarity of my tone. No mush or mud. My signal stayed nice and clean, and the note separation was always retained. And with this delay, smooth is the name of the game. There’s nothing harsh in the delay the Deep Blue produces.

Apparently – and I still have to corroborate this – the Deep Blue was designed to be place in front of or in the effects loop of an amp, and can be used either before or after distortion. Pretty amazing, as most time-based effects only work well in a loop and after distortion only. The folks at Mad Professor really put a lot of thought into this pedal. The guy at the shop where I tested it at – and someone whom I trust implicitly – plays the Deep Blue in front of an old Traynor amp, and loves it.

But there is a down side to this pedal, and that’s its price. At a street price between $325 and $350, it’s an expensive proposition, and like the Spring Fever, is probably the only thing that keeps me from getting this pedal. It’s tough to justify spending that much for a pedal, but that’s just me. Once a pedal gets in the $250 range, I start getting a bit antsy. But that said, if I had the scratch to get one, I’d run out right now and grab that pedal! It’s that good! (Damn! Knowing me, I’ll probably end up getting it… 🙂 ).

In any case, it gets 4.75 Tone Bones

Pros – Absolutely fantastic delay! Decay is perfect, and note clarity is like nothing I’ve heard.

Cons – Pricey

Read Full Post »

Gear Review: ToneCandy Spring Fever Reverb

Posted in Guitars, tagged , , , , , , , , , , , , , , , , on May 23, 2010| 4 Comments »


ToneCandy Spring Fever Reverb

Summary: Just about the sweetest spring reverb pedal I’ve ever heard, plus the pedal sports a nice, transparent clean booster that you can even use on its own!

Pros: I’ve heard simulated spring reverbs before, and they’ve been nice, but not THIS nice! Supposedly modeled after the original BOSS spring reverb sound, but takes it way ahead!

Cons: Very very pricey for a just a reverb with boost. Also, doesn’t run on batteries

Features:

  • Volume knob acts as a transparent clean boost
  • Reverb knob acts as a “dwell.”
  • Mix knob controls the amount of wet/dry signal (this is a very nice feature)
  • True bypass
  • All analog except for the simulation chip
  • Can do the full range of spring reverb from adding a tinge of grease to heavy surf.

Price: $275 Street

Tone Bone Score: 4.5 ~ I was completely blown away by the sound of this pedal, but the price completely scared me away. If cost isn’t an in issue for you, you’ll find none better than this!

Being friends with guys at a music shop can be incredibly useful, since they’ll show off their new stock; plus, knowing that I may buy it if they show it to me, they don’t hesitate to show it off. 🙂 Luckily, I usually have enough self-control to not buy most of the stuff they demonstrate.

I have to admit, though, that I was VERY tempted to get this pedal because I haven’t heard one like it – ever! It can slather on the ‘verb quite nicely and note clarity is retained at any setting along the reverb knob sweep. Obviously ToneCandy figured out some great values for pre-delay and trail. I just couldn’t get over how great it sounded with chord progressions and single note picking!

In fact, A/B’ing it with a Fender Deluxe Reverb Reissue just blew me away! It sounded even better than an actual spring reverb! Fender spring reverb, at least to me, is the gold standard in spring reverb, and for a pedal to sound even better than that, well, needless to say, that made a compelling case to get this reverb pedal. Add to that a completely transparent boost, and you’ve got a great pedal that you can put at the end of your signal chain and get all sorts of usage out of it! I could feel the GAS really starting to build up.

Then I asked the price, and my eyes bulged! At $275 for the pedal, that made my GAS go away pretty quickly. If price wasn’t an issue for me, I’d totally go for this pedal, but unfortunately, at that price, I started thinking, “I could get a couple of decent pedals, or even a nice Squier for close to that price.”

Needless to say, I didn’t get the pedal, though I do have to applaud ToneCandy for coming up with a fantastic spring reverb tone. Maybe if I can find one used in the future for a lower price I’ll get it. But for now, I’ll just gaze at it in the glass case when I go to the shop…

Here’s a sound sample:

Read Full Post »

« Newer Posts - Older Posts »