Feeds:
Posts
Comments

Posts Tagged ‘gear’

Home Studio There are different schools of thought around this subject, but I thought I’d throw in some of my own thoughts, since I’ve been at it awhile. Note that I won’t be talking about techniques necessarily, though I will include some tips and tricks… So without further ado…

First, let’s establish something here: You don’t need to buy super-expensive gear to sound good, and you don’t need a lot of equipment. I’ve found that in a lot of cases, while more expensive gear will afford you convenience features, and a better sound quality, for the home studio enthusiast, a lot of times this gear is overkill. I’ll go into some details below, but in my opinion, recording technique is far more important. So with that said, let’s start talking about what I think are essential pieces of equipment:

Computer Equipment/Software

You probably already have a computer, but it should be configured to handle digital recording. While drive speed is important, it isn’t necessarily critical. My MacBook Pro’s hard drive spins at 5400 rpm, and I have no problems recording stuff. But what you do need is space. I’d recommend getting two hard drives: one for programs, and the other dedicated to saving data. It’s just a cleanliness thing. Also, get as much RAM as your machine can handle. I’ve got 4GB on my machine. That’s even more important than a hard drive. You don’t need a super-poweful machine either, but dual-core machines really work well.

Okay, Mac or PC? Go with what you’re comfortable with. There are lots of programs out there; among them is a neat little program that works great on both PC and Mac called Audacity – it’s free! Todd Rundgren recorded a lot of his latest album using Audacity, so it’s definitely doable.

What about ProTools?

I’ve got it. It’s great. But the learning curve is super steep. In fact, when I first started recording, I spent more time learning how to use the damn software than getting my ideas down and that just frustrated me to no end; so much so, that I lost my taste for recording for several months – I just didn’t want to mess around with the software! I just wanted to get my freakin’ ideas down! I’m not saying it’s bad, but it’s complicated, and you’ll have to spend a lot of time learning the ins and outs of the program. With the home studio, what you’re after is getting your ideas down with reasonable quality – and fast. That, at least, is my opinion. In light of that, I use GarageBand to get all my ideas down. It has built-in rhythm loops so I don’t have to use a click track, and there are lots of add-ons, both free and affordable, that you can use in GB. The sound quality is excellent, and it even has some mastering presets that work amazingly well!

Digital Interface

There are lots out there. I happen to use the DigiDesign MBox 2, which has two analog inputs, MIDI, and a couple of others I don’t use. Very handy little box. But there are lots of solutions out there in the $300-$400 range. Most use USB, though FireWire is probably the optimum – it also costs more.

Microphones

Now this is just my opinion, but you’ll need at least two mics: One ribbon mic, and one dynamic mic. I have a Nady RSM-200 ribbon that cost me less than $200, and it works superbly! I also swear by my trusty Sennheiser 835 stage mic, which is a workhorse similar to the Shure SM-58, but I think it’s warmer and has a much flatter EQ response than the SM-58 which can get kind of boomy.

MIDI Controller

Being also a piano player – not nearly as good on this as I am on guitar – having a keyboard to trigger MIDI and add MIDI-based instruments is another essential. You can go the small route (2 octave) or go the full-size keyboard route. I use an M-Audio full-size stage keyboard myself only because it doubles as my MIDI controller as well as my gigging keyboard. It was also cheap at $300 new. Nice.

From my standpoint, this is all you need as far as essential equipment for recording. Now let’s get into some techniques and some nice-to-haves:

  1. Always record acoustic guitar using mics – and use two of ’em. Sounds obvious, doesn’t it? I’ve tried going direct into my computer, and the sound is horrible. But using two mics works great. I usually place my ribbon mic about six inches from the sound hole, then place my dynamic mic pointed at a 45 degree angle at about the 3rd fret to capture sounds coming off the neck. Also, to take advantage of the ribbon mic’s rear pickup, I have a board, or hard, reflective surface placed about two to three feet in front of me to reflect sound back. It gives just a sligh reverb effect that really fills out the recorded tone.
  2. If you can swing it, get a couple of low-wattage amps. In particular, I use a Fender Champ 600, which is a 5 Watt amp with an 8″ speaker. Another one I’ve used, but don’t own is the Epiphone Valve Jr.. What a nice little amp! Since you’re recording at bedroom levels, a small amp that puts out less volume works wonders. Now here’s the trick I’ve found to recording with these small amps. You can make that sucker sound HUGE by close-mic’ing the amp. I use a dynamic mic pointed at an angle along the cone of the speaker, and place it no more than 2″ away from the grille cloth. Then I use a variety of overdrive and distortion pedals to get grind or searing distortion, then in my software boost the low frequencies. The end result is that it sounds like I’ve just recorded a full-size stack! You have to play with your settings, but it’s definitely achievable. The other nice thing about using a small amp for recording is that the naturally bright voicing really works well in a digital recording environment.
  3. For vocals, always use a pop filter. I’m an experienced singer, and even though I have great mic technique, nothing is worse on a recording than picking up those oral transients that your mouth makes when making consonant sounds. Pop filters cost less than $20 and believe me they’re a life saver.
  4. While we’re on the subject of vocals… Avoid using a compressor on vocals as much as possible. When you’re singing a louder phrase, move away from the mic. It’s that simple. Compression is good to a point, but there’s a lot to be said about having volume dynamics in your vocals. You get a lot more emotion coming through when you have it. If volume is pretty much the same throughout a song, it’s well… boring in my opinion, no matter how good a singer you are.
  5. Avoid EQ as much as you can. Dial in the EQ on your instruments before you record, then only do wholesale volume adjustments later to make mix corrections. What you’re trying to do is capture the natural sound the instrument makes as closely as possible. The only exception I make to this is when I’m recording a low-wattage amp and want to boost the lows. Otherwise, I just do volume adjustments for the mix.

These are just a few things I’ve learned over the last few years of doing this. I’m sure I’ve missed some stuff, so if anyone else wants to add to this, please feel free!

Read Full Post »

What? Less gear? I must be speaking blasphemy, especially considering I’m such a gear freak – especially with my proclivity for pedals. But there’s also a practical side to this, as I am also a gigging musician. And especially when I do solo gigs, having less gear means less trips to the car. So as much as I can consolidate, I do. I was thinking about this because Christmas time through the New Year is usually a very busy time for me as far as gigs are concerned. For the past month, I’ve had at least three gigs each weekend, playing parties and other events. So you can see that I’m fairly sensitive to lugging gear.

So here I am in a coffee shop this morning, having put the finishing touches on my latest gear review on Aracom Amps RoxBox. In the article I mentioned that Channel 2 suffered from being flat at lower volumes, and that I ultimately solved the problem by running the amp through an attenuator between he power amp and speaker. I’ve had to do that practically every tube amp I’ve tested, so it got me to thinking: Why don’t more manufacturers just add these to their amps? I suppose production cost has a lot to do with it, but amp makers such as Faustine Amps have a -18db reactive attenuator built into their Harlequin line of amps and the Fender Princeton Studio also has a built-in attenuator as well. It’s a cool feature, and one that will allow you to get power tube saturation at lower output volumes.

Let me explain what I mean by way of a diagram:

Output attenuator

As you can see, the traditional master volume circuit contains an attenuator between the pre-amp and the power amp. This means that you can crank the pre-amp and get pre-amp distortion, while limiting power to the power amp; thus limiting output volume. But it also means that in many cases, you won’t get power amp distortion unless you crank the master, which tends to be too loud, especially in small clubs and restaurants. But in the second illustration, with a second attenuator between the power amp and the speaker, it is now possible to crank the master volume to get power tube saturation while limiting overall output. I currently do this with the use of a Dr. Z Air Brake. But going back to the topic of this article, it’s just another piece of gear that I have to bring with me to a gig. Ugh!

In addition to production cost, there is a danger of possibly burning out the power tubes if you really overdrive them. I’ve done it to my Fender Hot Rod, by turning the attenuator to maximum attenuation, and diming the Drive knob for too long a time. Not good.

As I mentioned above, Faustine does this with their Harlequin line of amps (not sure about the others), and while -18db of attenuation may seem like a lot, it’s actually not that much – it takes the edge off. There must be a happy medium, say -24db or maybe -30db? Who knows? But whatever… this is a case where less gear is much better!

Read Full Post »

Fuzz pedal? Me? GoofyDawg? I know, I know… I’m an overdrive and overdrive/distortion pedal kind of guy. I usually prefer soft clipping pedals that throw just a hint of clipping and lot of input gain at an amp to make the amp’s tubes saturate and overdrive. And up until this point, I haven’t even discussed any fuzz pedals. But after hearing some of the sound clips from the new Algal Bloom from FH(fx), I have to say that I’m now rethinking my predeliction for overdrive pedals only. But don’t let me do the talking. Check out the clips on the Fuzzhugger.com site!

This pedal looks awesome! And from what I could tell from the sound clips, it’s capable of producing some gnarly fuzz and, as the guys at Fuzzhugger.com say, “[the Algal Bloom’s] name is inspired by its tone – thick and destructive – but very alive.” From the sound clips, I’d say that’s a pretty accurate description of the Algal Bloom.

It’s weird isn’t it? I’m normally not into that kind of sound, but it’s so ugly, it’s lovable! I had a little dog like that when I was growing up. It was a mix of Chihuahua, Toy Poodle, and Wire-haired Fox Terrier. Ugliest freakin’ dog you ever saw – like a little rat. But I loved that dog! He was smart and playful and so loving! Sorry, reminiscing… not that I could say that about the Algal Bloom, but there’s something about how it sounds that I just dig! Check it out!

Read Full Post »

Saint Guitars Messenger Baritone

Saint Guitars Messenger Bariton

Saint Guitars Messenger Bariton

Just wanted to share some initial sound bites that I created with a couple of new pieces of gear. The first is a Saint Guitars Messenger Baritone. Before now, I had never played a baritone, and really didn’t know what to expect. But after playing around with it for a few days, I have to say that I just love how this thing sounds. Baritones have been getting more and more popular as of late due to their very low, natural tone, and several metal players have started using them because of this. But I truly believe that a good test of a guitar or an amp is how it sounds clean. Played clean, you can’t hide mistakes. So here’s a clip that I created this morning to demonstrate the beautiful, clear tone the Messenger Baritone creates.

The guitar was played through the Normal channel of a Reason SM25 amp. As you can hear, the tone is deep, but surprisingly chimey due to the bright-sounding walnut body and neck, Adam Hernandez’ tone wood of choice. It took awhile to get used to playing the wider frets, but once I got a handle on it, I just started loving how this guitar plays and sounds!

Aracom Amps RoxBox 18 Watt Head

Aracom Amps RoxBox 18 Watt Head

Aracom Amps RoxBox 18 Watt Head


You know me, in addition to just digging on overdrive pedals, I love low-power amps! When Jeff at Aracom initially contacted me, I had never even heard of Aracom amps! And I pride myself on knowing about these things! Yikes! So when I perused his site, I was immediately taken by the RoxBox. And after just a day of using it, I have to say that I LOVE THIS LITTLE AMP!!! First, because it’s a low-wattage amp, which makes it very versatile, and secondly because it comes equipped with EL-84 power tubes! There’s a brightness in the EL-84 tubes that just makes my soul reverberate, and I just dig the sounds that this amp can produce. But just as with the Messenger above, the big test for me is how the amp sounds clean. And baby, it sounds great clean! The sound bite I have here uses the same clip above, but layers on a lead part using just my Strat played through Channel 1 of the RoxBox. Channel 1 has TONS of clean headroom, and even ‘buckers have a hard time making this channel grind. This will definitely score well with the pedal freaks like myself. Anyway give it a listen:

This little amp is nothing short of impressive, and priced at $895 for the head, it’s also an incredible value!!! Kudos to Jeff at Aracom for creating an attainable hand-wired amp! Looks like I’m going to be shelling out bucks for both the Reason SM25 AND the Aracom RoxBox.

Read Full Post »

Creation Audio Labs Mk.4.23 Boost

Creation Audio Labs Mk.4.23 Boost

Creation Audio Labs Mk 4.23 Clean Boost

Summary: Truly flat EQ response, zero coloration, clean boost pedal that takes your tone and gives you more, much more of it. Can be used as a simple clean booster, or can slam the front of your amp with up to 24dB of gain.

Pros: Does only one thing: It boosts your signal, giving you more cleans, or slamming your preamp tubes into sweet, singing, sustaining distortion. No bells and whistles, just a single volume knob. Super cool stainless steel finish, with backlit lettering.

Cons: None.

Price: $149 direct

Specs:

  • From zero to +24 dB of transparent boost
  • No tone coloration
  • No signal distortion
  • No phase reversal
  • True bypass with quiet switching
  • Ultra quiet 9v power supply included

Want a pure boost pedal? One that just does what it’s supposed to do? Simple to use? Doesn’t add its own “character” and just gives you more of your own tone? Look no further. I don’t say these words lightly either. All those things are true!

When Anthony Bonadio of Reason Amps first told me about the Creation Audio Labs Mk 4.23, I was really taken by the emotion in his voice when he described the pedal, and his claim that it was the best boost pedal he’d ever used. That’s saying a lot coming from a man who rarely uses pedals. And when he offered to send his to me to try with the Reason SM25 amp I recently reviewed, I just couldn’t wait until it arrived. It arrived today, and now I understand why he feels the way he does about the Mk 4.23.

Playing it through the Normal (clean) channel of the SM25, it does what it’s supposed to do: It boosts your clean channel. It was what I expected, so it was a bit boring, though I was impressed by the fact that there was no snap, crackle, pop when I kicked it in, and it just simply gave me more of my clean tone. But where this pedal really shined was when I kicked in the Bright and StackMode channels of the amp.

Talk about a visceral response! I can’t even describe the feelings I experienced as the pedal slammed the preamp tubes, and made the amp produce sweet, singing sustain that lasted for days! I always knew that the amp could produce incredible distorted tones, but with the boost engaged, I could hear additional harmonics and overtones issuing from the amp that up until that point I had never heard! On top of that, I never lost a bit of tonal clarity, even when I had the volume knob dimed and was creating that scooped, snarling dog buzz. That’s certainly a testament to the quality of the amplifier and complex and sophisticated sounds it can produce, but it’s also a huge testament to Mk 4.23 that can push the amp into that organic, high-gain overdrive. OH MY FREAKIN’ GOD!!!

I tested the pedal with humbuckers and single coils, and it was interesting to hear the difference in how the pedal performs with both. With humbuckers, the volume boost is less dramatic, as humbuckers send a lot of gain by default. But the effect was by no means displeasing. Where I didn’t get a significant volume boost, I got a lot more gain, driving the preamp tubes even harder. The sound was absolutely delicious! In fact, it drove the amp into feeding back, even a lower volumes! How cool is that?!! The guitar I used has tons and tons of sustain, but with the amp slammed, the sustain went on and on and on. And with that much gain, the compression from the power tubes just gave the signal balls of steel. But wait! There’s more!

With my Strat, the volume boost effect was dramatic; perfect for pushing your volume into great lead levels to get over the top of a mix. I didn’t get as much drive into the preamp tubes, but I wasn’t expecting that in any case. And yet again, the booster just took my tone, and simply gave me more of it.

So as you can tell, I REALLY like this pedal. I love what it does in a big way. But here’s another thing to love about this pedal: Its price. Creation Audio Labs got tired of using middle men and retailers that would price the pedals out of many players’ budgets, so they decided to only go direct. So what used to be a $260 pedal is now only $149. Buy it direct from Creation Audio labs!

In closing, after I return this pedal to Anthony, I’m going to buy this pedal. After just using it for just a short time, I’m confident in saying that this is a pedal that will always be on my board.

Read Full Post »

Hardwire RV-7 Stereo Reverb

Hardwire RV-7 Stereo Reverb

Back in September of this year, DigiTech released a line of high-end pedals under the “Hardwire” brand. These are high-quality, true-bypass pedals, and I have to say that I’m very impressed. Traditionally, DigiTech hasn’t been known for really high-end pedals. They’re typically priced at the mid- to low-end, and have always had reasonable quality. Nothing to complain about, but definitely nothing to write home about either.

But with the new Hardwire line, they’ve completely stepped beyond the norm, and have created pedals that have the potential to compete with other high-end pedals. In addition to being true-bypass, the pedals operate with a higher operating voltage which gives them a lot of headroom, making them a lot less susceptible to clipping. The power conditioning within each unit also ensures a constant voltage; a boon when a battery is being used, so you don’t get performance loss as battery power runs down (though I wonder how that affects battery life…).

I’ve been so focused on off-name brands of pedals for awhile that I’ve essentially ignored what the big production houses have been creating. So I apologize for being a bit behind the curve with the timing of this review. But be that as it may, I’m glad I stumbled upon this particular pedal while I was testing the EH #1 Echo at my local Guitar Center.

After I was done testing the #1 Echo, which I really liked, by the way, I asked the helpful, and amazingly knowledgeable sales guy if he had any good reverbs in stock. GC doesn’t really carry much in the way of boutique pedals, so I wasn’t expecting much. But very much to my surprise, he pointed me to the new line of Hardwire pedals, with special emphasis on the RV-7 Stereo Reverb, explaining that Hardwire was a new brand from DigiTech. I raised my eyebrows at that…

Sensing that I wasn’t some schmuck, he didn’t try to do a selling job on me, and just simply said, “Dude, I think you’ll really like this pedal. I wasn’t expecting it to be THIS good. You gotta try it out.” So I did, and the first words that came out of my mouth were “Damn! That’s sweet!” The sales guys just grinned and said, “I told you. Surprising to come from DigiTech, huh?” That was putting it mildly, to say the least.

So what makes this pedal special? DigiTech licensed 7 reverb effects from Lexicon. I’ve worked with Lexicon reverbs for years, and they are top-notch. At my Church gig, we use a Lexicon rack for vocals, and I just DIG that unit. To have them in a pedal for my guitar is even better! Granted, it’s digital modeling, but this pedal really KICKS ASS! In all the voicings, the sound is consistent, and you can dial in as much attack and decay as you need. Attack is controlled via the Liveliness knob which is similar to a pre-delay. For those of you who aren’t familiar with pre-delay, it’s essentially a certain amount of time (usu. in milliseconds) that a reverb unit waits before it kicks in the reverb. It’s very useful to have this kind of control, because those units without it often suffer from being really wet and soupy. Pre-delay allows a certain amount of dry signal to go out first, then tail out with reverb. The net result is that you get much better note articulation.

My favorite setting was the Spring Reverb, though they all sounded dynamite! And with the fine-tuning you can dial in with the Liveliness and Decay knobs, you can get just the right reverb effect for your purposes. I had so much fun playing with this little box! I spent more time with it than the #1 Echo.

Let’s look at the RV-7 features (from the DigiTech web site):

  • Reverb Types
    • Room – Fast decaying reverb; great for a touch of ambience
    • Plate – Renowned studio reverb heard on classic recordings
    • Reverse – Reverb in reverse; gradually crescendos to full volume
    • Modulated – Lush, modulating, reverb ideal for chords
    • Gated – Unique reverb with abrupt decay; good for percussive playing
    • Hall – Large, encompassing reverb with warm decay
    • Spring – Classic “surf” reverb; great for Rockabilly too!
  • Tails On/Off Switch – When on, reverb tails are not cut off in bypass
  • True Bypass circuitry preserves your tone in bypass
  • Constant high-voltage operation for tonal quality and noise reduction
  • HardWire Pedals include the following stage accessories
    • Stomplock™ knob guards lock your tone in place and prevent tampering or accidental knob adjustments onstage
    • Green gaffer tape helps you locate the pedal in adverse stage lighting
    • Custom-cut Velcro® pads attach and lock your pedals to your pedalboard
The features in this pedal, plus the standard features included in all the Hardwire pedals are definitely worth a look. And you’ll actually be blown away by the price: $149.00. While higher than their $100 pedals, that’s not a lot more to ask for that much more quality and features!  And just for shits and giggles, here’s a video review by ProGuitarShops.com:
Finally, I realize that this review isn’t in the format of my regular reviews, and for that, I’m sorry. I just wanted to get this out. In any case, the DigiTech Hardwire RV-7 Stereo Reverb gets:
5 Tone Bones - Gear has stellar performance, value, and quality. This is definitely top of the class, best of breed, and it's a no-brainer to add this to your gear lineup!

Read Full Post »

Pedal Board - Lee Rittenauer

Just read a great article on setting up your pedal board on Guitar Jam Daily. It has great information on planning out your board size and layout – something I wish I had done before I got my board, which is now too small for all my pedals, especially since I’ve gotten a wah pedal! Eek! In any case, check it out!

But the article also raised a question that I get from time to time: In what order should I place my pedals? There is a general model that most people follow, and instead of re-inventing the wheel, I’ll point you to another great article on Harmony Central that covers this very topic.

Photo courtesy of andybrauer.com

Read Full Post »

Way Huge Fat Sandwich Harmonic Saturator

Okay, okay already. Another overdrive pedal. Just when you think you’ve seen ’em all, another pops up. But harken back to the early 90’s, and you’ll find Way Huge pedals gracing the boards of many guitar gods. Way Huge closed their doors in 1999, but a recent partnership with Dunlop has revived Way Huge, and the Fat Sandwich is one of the products of the partnership.

This is one special-sounding pedal. Check out the clips here.

Read Full Post »

Creation Audio Labs Mk.4.23 Boost

Creation Audio Labs Mk.4.23 Boost

As many know who read this blog regularly, I’m a bit of an overdrive/distortion pedal nut. Just love the things. Silicon, germanium, doesn’t matter. I’ve always dug the tones boxes like the Fulltone OCD and Ibanez TS-808 produce. But then again, I never had good enough tube amps whose natural distortion didn’t require some bolstering.

Then I discovered Reason Amps, and did a review of the Reason SM25, which the guys at Reason graciously sent me to evaluate and to show to some local dealers. For the first time in my playing career, I’ve been playing an amp that has a knock-your-socks-off natural distortion. It’s so pleasing that I just don’t need overdrive or distortion pedals to get that saturated sound. It’s in the amp!

But the one thing that I found that I missed when playing with the amp at a couple of recent gigs was the volume boost I’d set up in my drive pedals to play a lead. It wasn’t that big a deal; I just set up the base volume of the amp a little louder than normal, then use the volume knob on my guitar. And for most situations that has worked out well. But when the band gets really loud, I need some extra oomph, and that’s when I started thinking that a booster pedal would really help.

And wouldn’t you know it, by pure coincidence, Anthony Bonadio at Reason called me last week and asked me if I had tried out the Creation Audio Labs Mk.4.23 Boost pedal. He claimed that it was best boost pedal he’d every played through, and that it was completely transparent. It takes your guitar’s signal and just makes more of it; totally transparent. Then told me he’d send his own out to try with the SM25. Then I got really interested. Check out the video demonstration below:

Flat EQ response, and a single volume knob? What could be easier?

I know there are lots of booster pedals out there. But from my research, it seems that most add some coloration of their own, or have an extra “drive” knob to add overdrive. From my perspective, a booster should just well, boost; that is, take what you have and just give you more of it. And from what Anthony has said, and from the reviews I’ve read, this seems like it does just that.

If this is enough for you to take a bit, you can only get the pedal at Creation Audio Labs directly. But don’t dispair! This pedal is only $149.00!!! Can you believe it?!!! Creation Audio Labs want to reach as many people as possible, so they eliminated the middle man and sell their pedals direct. So what used to be $250+ pedal is over a hundred bucks cheaper!

I think those pedals are definitely worth a look for price alone! Creation Audio Labs has been known as a great boutique pedal maker, and to have them get into the range of more affordable pedals is absolutely awesome! Check ’em out!

Read Full Post »

Reason Amps SM25 25 Watt Combo Amp

Reason Amps SM25 25 Watt Combo Amp

Reason SM25 25 Watt Combo Amp

Summary: Incredibly expressive and versatile amp that can deliver a wide range of tones from glassy, sparkly cleans, to lewd, rude, and crude distortion, all in a single cabinet!

Pros: Killer tones in all channels. Amp is voiced bright by design, which makes it great to use in the studio. StackModeTM is the best thing since sliced bread, and is THE secret sauce that makes Reason Amps stand out from the rest.

Cons: No effects loop, which would be handy for placing reverb and other modulation effects after the amplified signal. Just a nit.

Price: $2395

Specs:
• Output: 25 watts RMS @ 5% THD
• 1 X 12 Eminence Red Coat Driver
• (2) 6V6 output tubes, in Class AB Fixed Biased configuration
• (4) 12ax7 preamp tubes
• GZ34 Rectifier tube
• 3 way Stack switch – Normal, Stack, Bright
• Normal channel – Volume, Treble, Middle, Bass
• Bright channel – Volume, Tone
• StackMode™ – Bright & Normal channel controls are active, Stack Volume & Hi-Cut
• Oversized extra capacity power supply
• Power Switch
• Standby Switch
• Independent output jacks for 4,8, 16-Ohm operation
• Footswitch access to all three channels/modes

When I discovered the Reason Amplifier company a few weeks ago, I was so intrigued by what they had to offer that I immediately contacted them. I had the fortune of getting in touch with Anthony Bonadio, one of the founders of Reason to talk to him about his exciting new company and his new line of amps. That conversation led to him sending me an SM25 25 Watt combo to review; and since I’ve had it, I haven’t gotten much sleep from playing with it late into the night. Now you might say that I’m just excited about playing a new amp. Yes, that certainly has a lot to do with it. But what Reason has come up with in their amplifiers is so incredibly brilliant and unique that I’ve been spending all my free time trying to discover the subtle intricacies of this tone machine. There’s a lot to talk about, so let’s get started!

“Dahr-ling, you look mahvelous!”

The Reason founders, Anthony Bonadio and Obeid Kahn, are both vintage gear freak-o-maniacs, and the retro styling of the entire Reason amp line is a testament to that passion. The SM25 sports a black tolex cabinet with light brown trim around the grille cloth, and a thick leather handle with what appears to be brass accoutrements. Between the control surface and grill cloth is a prominent tolex-covered cross board sporting the Reason logo which, by the way, is very cool, very retro as well. The control board looks like burnished brass with black, bold lettering for labels. And to add to that retro vibe, chicken head knobs are used for all the controls. This amp, and all Reason amps for that matter, just ooze vintage mojo. Just looking at the amp, I can’t help but grin that grin you get when you see something so far-out COOL!

It’a hard to discern the actual size of the amp from just a picture. So make no mistake about its size: This is not a diminutive 25 Watt amp. In fact, it’s about as big as a Fender Twin, though not as deep. The shipping weight said 32 pounds, but from feel and comparison to my Fender Hot Rod, it weighs almost as much. But that’s not a bad thing. A beefy cabinet creates a lot of resonance if done correctly, and believe me, it’s done correctly with this amp.

How It Sounds

All Reason amps, including the SM25 are voiced bright. You don’t get beefy lows out of this, and that’s by design. Now before you dismiss that, on stage and in the studio, that bright voicing will ensure your guitar cuts through the mix. I recently played it at one of my regular gigs, and where my amp oftentimes gets lost in the mix, forcing me to pump up my volume, I had no problem cutting through, and mind you, I barely had to push my volume. The bright voicing let my guitar tone sit in the mids and highs. My sound guy even commented on how well he could hear my guitar without me pushing the volume like I usually do during a solo break; though admittedly, like any lead guitarist, I usually don’t mind being louder than everyone else. 🙂

In the studio, using the amp for recording is like being in heaven. The bright voicing combined with the rich tones the amp produces is simply candy for the ears. From a practical perspective, brightly voiced amps also record much better. For home recording I’ve had to stop using my big amp because it’s just too boomy, no matter how I set the EQ. I’ve had to use smaller, brighter amps because they cut through a mix much better. But since I’ve had the SM25, I’ve recorded two songs with it, and like I said, I’m in heaven. I now have a bright voice to cut through the mix, but rich tones as well. It’s the best of both worlds!

The SM25 is also incredibly touch-sensitive and responsive to the subtlest manipulations I made on my guitar. In fact, when I first started playing with it, I was a bit embarrassed by how I sounded. For my all my tests, I played along to some jam tracks I’ve produced for practicing different styles, and recorded what I played through the amp. When I played back what I had recorded, I was appalled at how crappy I sounded! All my mistakes came through! I couldn’t hide whatever bad habits or bad technique I had behind effects, like I normally would. In short, this amp has forced me to play better because it’s so unforgiving when you make a mistake. But hey! It’s never a bad thing to be shown your weaknesses. That’s how you grow and improve!

Multiple channels, lots of tone shaping possibilities…

The SM25 comes with two channels: Normal and Bright. But it also sports a third “channel” called StackModeTM that’s essentially the Normal and Bright channels run in a series with an extra gain stage, while retaining volume and tonal control over the Normal and Bright channels. To me, StackMode is Reason’s secret sauce, but I’ll get into that in a bit. I’ll first describe the independent channels.

The Normal channel sports a volume knob and a three-band EQ. The volume knob is also a push-pull knob, and pulling it out adds some extra high-freq boost to bring out the super high frequencies. The effect is that once you set up your EQ, pulling out the knob adds some extra high-freq shimmer and sparkle. It’s subtle, but absolutely delicious. Comparatively speaking, the Normal channel sounds like your classic, jangly American clean tone, but with the high-freq boost, you get a bit of the sharpness of the British clean – nice.

The Bright channel is well, bright. It too has a push-pull volume knob for extra high-freq boost, and it has a single tone knob to back off some of the brightness. The Bright channel is also the more “ballsy” of the two, and really kicks in some pretty high gain. It’s quite lovely, in my opinion, and it’s perfect for doing the traditional solo break that will cut right through a mix with ease.

Channels? We don’t need no stickin’ channels!

But for me, the real attraction of this amp, and actually any amp from Reason for that matter, is StackModeTM. In all my years of playing, I’ve never come across anything quite like it. On the surface, you might think this is just another channel on a multichannel amp. It is in a way, because of its independent gain stage. But that’s about as close a comparison that you can make to other multichannel amps. Unlike other multichannel amps where all the channels are independent, StackModeTM input doesn’t come directly from the guitar. The guitar’s signal is routed through the Normal and Bright channels first, then fed into the StackMode channel. And the volume and EQ settings on the Normal and Bright channels are still active!

Because volume and EQ are retained in the Normal and Bright channels in StackModeTM, the tone shaping possiblities are incredible. What you adjust in Normal or Bright affects the final output. You can crank up the volumes on the first two channels and achieve uber gain, with thick, rich distortion. Or you can dial it back a bit and take a more balanced approach. The point is that you can do a lot of tone shaping to your needs while in StackModeTM. And here’s the kicker: The amp still retains its touch and guitar volume sensitivity in StackModeTM.

What does this mean? Well, I soon discovered that StackModeTM was the only channel I’d probably ever use, unless I had to go super clean, whereas I’d just switch to the Normal channel. The amp in StackModeTM is so responsive to picking attack and volume knob levels that I found I just didn’t need to do any channel switching at all once I dialed in my settings for the Normal and Bright channels. It’s that good!

One other thing, the volume knob on the StackModeTM channel is a very good Master volume. When I’m playing late at night, I can turn the volume down on the StackModeTM channel, and still retain the characteristics of the settings I made in the first two channels. It’s just softer. How cool is that? So that’s why entitled this section, “Channels? We don’t need no stinkin’ channels.” Once you have your settings dialed into StackModeTM, you’ll never want to get out of it! So for me, the SM25 is effectively a single channel amp with adjustable stages.

My Tests

In any case, for my tests, I used four different guitars: A Strat, a PRS SE Soapbar II with P-90’s, an Epiphone Korina Explorer and a Saint Guitars Benchmark, both with humbuckers. I’ll talk about how each guitar sounds separately below.

Fender Strat

Obeid Kahn is known in the industry as a “Strat man,” and this amp really sounds great with a Strat. I’ve got the vintage re-issue Tex Mex pickups in mine, and slathering on reverb, you can get some awesome Dick Dale-like tones. But it doesn’t necessarily sound like a Fender amp. In fact, the clean tone is like a cross between a Fender and a Marshall. It’s creamy smooth, but bright and sparkly at the same time. The big cabinet adds to the resonance, and the ever so slight voltage sag that you get from the rectifier adds to the sustain and resonance. This is boon when you’re playing with a Strat because they do not sustain well at all. I could get country twang to hard-driving distortion with uber sustain with my Strat.

PRS SE Soapbar II

P-90’s are hot pickups by nature, and it doesn’t take much to push any amp into overdrive, and when it does this, it’s a preamp overdrive lover’s wet dream! With the SM25, the 12AX7’s just sing with sweet, smooth overdrive goodness. There’s nothing harsh about the sound this produces in the SM25, but one thing I did notice with the tone was that unlike other amps I’ve played with my SE Soapbar II, even though the amp is bright, the sound the amp produces with it is big and bold, without being boomy. It’s crystal clear, and doesn’t wash out the higher notes in a barre chord, which often happens with more boomy amps. All in all, I just dug that halfway between single coils and humbucker sound my P-90’s produced with the SM25.

Epiphone Korina Explorer

This is a real rock guitar, with a warm ballsy tone. Plugged into the SM25, I was amazed at how the amp responded to this guitar, and I was able to spew out some thick distortion and singing sustain with the volume knobs on the amp dimed to the hilt. I’m not a metal player, and technically, with the bright voicing of the Reason amps one wouldn’t think they’d be suitable for metal, but the lewd, rude, and crude drive I could produce with the Explorer plugged into the SM25 was scary! But in a good way. And when I scooped the EQ, yikes!

Saint Guitars Benchmark

Of all the guitars I used for testing the SM25, the amp seemed to love the Benchmark the most. This guitar was spec’d with Blues and Classic Rock in mind, and through the SM25, I’ve never heard it sing like this. I could go from deep, dreamy clean to rabid dog distortion, and the whole time, the SM25 maintained a tonal clarity and character; never muddying or washing out. It was other-worldly, to say the least.

Made for the Road and the Studio

Anthony Bonadio cautioned me during a previous conversation that he didn’t want to alienate people from buying the amps when he said, “Our amps are really intended for the gigging and session musician.” In other words, Reason amps aren’t really meant for the bedroom musician. These amps want to move air, and that’s no exception with the SM25. In fact, when cranked, it’s a hell of a lot louder than my 40 Watt Fender Hot Rod Deluxe, and that’s a loud amp! It just wants to project its voice. Premier Guitar even gave its bigger brother, the SM50, its “Loud as Hell” award. But in my opinion, the real test of an amp is how good it sounds throughout its entire range of volume. That’s a mark of versatility, and in spite of what Anthony claims is the focus of Reason’s line of amps, you actually can play these amps at bedroom levels and still produce kick-ass tone!

A lot of amps don’t sound good unless they’re cranked, but at lower volumes they just peter out and lose their character. But at least with my experience with the SM25, it sounds great at ANY volume. Considering that all Reason amps are built around the exact same circuitry, I can safely say that this probably applies to the entire line. So don’t be fooled by the “loud as hell” moniker. These amps are incredibly versatile amps that are comfortable be played in lots of different venues under a variety of conditions.

My Overall Take

I think you can guess that I just love the SM25. For a musician like me who plays small to medium venues, and whose studio is located in a carpeted garage, this amp is a dream come true. It’s expressive with all my guitars, and it’s so versatile that I can use it wherever I play.

As I shared with Anthony recently, StackModeTM is it for me. It’s the secret sauce that sets Reason amplifiers apart from the competition! For more information, go to the Reason Amps web site. And if your local dealer has some in stock, I encourage you to go there and play around with one. You will not be disappointed; in fact, you’ll be blown away!

Read Full Post »

« Newer Posts - Older Posts »