Feeds:
Posts
Comments

Posts Tagged ‘guitar gear reviews’

Jensen Jet Falcon JC12-50F

Summary: The newest member, lowest-powered, and lowest-cost speaker in Jensen’s newest “Jet” line at 50 Watts, this speaker produces tons of happening tones right out of the box!

Pros: Even before reading Jensen’s description of the Falcon, I found it to be a speaker that was built upon the substantial foundation of a rich bottom end. But make no mistake, the Falcon is not boomy in any sense, and that makes this speaker versatile. I can see using this in a bunch of different styles. I love it!

Cons: None.

Features (as tested):

  • 50 Watts / 16 ohm
  • 12″ Overall Diameter
  • 1.5″ Voice Coil
  • Ferrite Magnet
  • Steel Frame
  • Paper Cone
  • 98.7 dB Sensitivity
  • 7.2 lbs

Frequency Response Graph

Click for larger view

Price: ~$85-$90 street

Tone Bone Score: 5.0 ~ If you’re looking for a versatile speaker that can handle a bunch of different styles of music with ease, look no further. This is a keeper!

There are tons of advantages of being close friends with an amp builder; not the least of which is I often get to test everything in his shop, including components he gets from manufacturers to possibly include with his amps. The builder I’m speaking of in particular is my good friend Jeff Aragaki of Aracom Amps. A couple of weeks ago, during one of our numerous conversations, he mentioned that he got a new speaker from the Jensen distributor to try out, and asked if I would like to test it. Of course, as I have a very low resistance to trying out new gear, I immediately agreed. I think he asked me to test it out because he’s been so busy with building his AWESOME PRX150 attenuators and working on a couple of new amp designs that he didn’t have much time to do an evaluation himself. That’s a great problem to have!

In any case, we met a couple of days later and he handed the speaker over to me. I was excited to do a test on it! But unfortunately, life happens and I didn’t get the chance to test the speaker until just a couple of days ago. I wish I could have tested it earlier, because bottom line – and if you don’t want to read any further – I’m not giving the speaker back to Jeff. 🙂 Read on if you want to know why…

I could say a bunch of stuff about the Jensen Jet Falcon, but I’ll just say this: The Falcon sounds freakin’ fantastic right out of the box. My experience with speakers has been that you have to play them for several hours before they start breaking in to remove their harshness. The only thing Jeff did once he got the speaker was open the box. I installed the speaker in its brand-new, pristine state so I was anticipating having to play if for a few hours; not necessarily a bad thing, mind you. But that’s what I was expecting.

Much to my very pleasant surprise, once I had it installed in my closed-back 1 X 12, I was immediately taken by its tone. There was absolutely ZERO harshness! And I immediately thought that if it sounds this killer right out of the box, it’s going to sound even better once I’ve gigged and recorded with it. The cleans were sparkly with a nice, substantial bottom end, and the overdrive tones with my ’59 Les Paul replica got me quickly into Rock and Roll nirvana.

I could go on with technical details, but I’d rather not bore you with those. You can read about them on the Jensen product page. But as I said, bottom line, this speaker isn’t going back to Jeff. Hopefully he uses my enthusiasm to offer this speaker in his line. I recorded some clips to show what I mean. Both clips were recorded with my Aracom VRX22 and my ’59 Les Paul replica plugged straight into the amp. I only added a touch of small room reverb in my DAW to give the tone a bit of grease:

Clean with a Dirty Lead

Dirty Lead

I also downloaded the clips from Falcon page. Frankly, I didn’t like how these were recorded, but they are just reference clips:

Clean

Overdriven

As a final note, I’ve been playing this in my studio for the past few days, and the more I play it, the more I love it, especially for the songs I’m working on that need a great overdrive tone. I can’t wait to gig with it!

Read Full Post »

Click for larger image

Peterson StroboClipTM Clip-On Tuner

Summary: A high-accuracy (0.1 cent) clip-on tuner! But it’s a Peterson Strobe tuner and that means tuning sweeteners. The StroboClip has several of Peterson’s sweeteners for different instruments, and these sweeteners ensure that your instrument(s) will sound great.

Pros: To me, the Sweeteners are what set apart Peterson tuners from the pack. But as far as the StroboClip is concerned, the clip-on is great for use in both the shop and on stage, and the fact that it is a clip-on makes it versatile enough to use on a variety of instruments. And with a metal enclosure, you can be assured of its durability.

Cons: None.

Features (from the Peterson site):

  • Smallest Multi-Temperament Tuner
  • 1/10 Cent Accurate
  • Smooth, Real-Time Display
  • Alternate Temperament Presets (Including Buzz Feiten Tuning System®)
  • Includes Eastern Temperament Presets
  • Drop/Capo Setting
  • Adjustable Key
  • 28 Exclusive Peterson Sweeteners™/Temperaments
  • Adjustable Concert A Reference: 400Hz to 490Hz
  • Auto Sleep And Power Off For Battery Saving
  • Low Power Consumption
  • Virtual Strobe™ Patented Technology

Price: ~$70 street

Tone Bone Score: 5.0 ~ I received this as a test unit from Peterson the other day, and used it to intonate one of my guitars, which I then used for a recording, and used it on-stage this evening. In all applications, it worked incredibly well. I have absolutely no complaints about this unit! So for studio, shop, or stage, this is a winner!

I dig Peterson tuners, and the fact that this comes in a clip-on makes it super-versatile; add 0.1 cent accuracy, and this is an absolutely fantastic tuner. I’m not really one to use a clip-on on-stage for guitar, even though I used it tonight to test it out, but for the studio, and especially for intonating guitars, I can see how the StroboClip will be an indispensable tool for me! That said, I am getting a ukulele pretty soon, so I’ll probably be using the StroboClip for that.

As I mentioned above, the thing that has always stood out for me about Peterson tuners in general are the sweeteners. I don’t know any of the mathematics behind the technology, but the best explanation I can give is that the Peterson tuners don’t just tune the string to the exact correct pitch. When set to a particular type of sweetener (for guitar and other instruments), certain calculations are made in the tuning algorithm to compensate for the type of instrument. The net result is that once you tune, your chords and note runs sound great!

Many tuners that just tune a string to the exact correct pitch, require some adjustment to get them completely dialed in. But with a Peterson strobe tuner, those minute adjustments are already done for you, so when you tune, you tune to the compensated pitch. That’s about the best explanation I can give without the technical knowledge. Just let it be said that once I’ve tuned with a Peterson tuner, my guitars sound so much better because they’ve been tuned with the guitar in mind. But the StroboClip also includes several other sweeteners for other instruments such as mandolin and ukulele, so it can be used to great effect with different instruments.

With respect to the physical act of tuning, it takes awhile to get used to tuning with a strobe tuner. Unlike other tuners where you either center a needle or LED, all Peterson strobe tuners use a moving checkerboard that speeds up or slows down depending upon how far off your tuning is. Right to left movement means you’re flat, and the converse for sharp. As a strobe tuner is super-sensitive, you have to get used to picking very lightly (I just use my thumb) to tune. But once you’ve gotten the feel for it, it’s very easy.

Tonight, I used it in my weekly solo acoustic gig. Amazingly enough, my Yamaha APX-900 stays in tune so well – never had an acoustic that did that – so the adjustments I made were minute to each string. But I do have to say that after tuning with the StroboClip, unlike other tuners like my venerable TU-2, I didn’t have to do any post-tuning tweaking.

As for the price of $70, it’s not cheap. But believe me, if you want a great tuner for studio or shop use, you could do a lot worse. I found it extremely useful for intonating my guitar last night. I have an old Seiko analog-style tuner that I’ve used for years for that purpose, but it has always required running a cable from my guitar. With the StroboClip, I just clipped it to the headstock. This also meant that I could keep my guitar plugged into my amp so I could hear what I was doing as well as see what the StroboClip was doing. So very cool!

All in all, this is a great little unit that I will most assuredly be keeping around for a long time!

Read Full Post »

Several months ago, while looking for a Les Paul, I once again got sidetracked by another guitar which I bought in its stead; the Gibson 2009 Limited Run Nighthawk. Back in 2009 Gibson release several guitars with limited production runs. The Nighthawk, which had a run of 350, was a revival of sorts of the VERY quirky original Nighthawk that saw a very short life of six years back in the 90’s. The 2009 is not a duplicate of the original; rather, it is more of a hybridization of three guitars. It has the body shape of the original Nighthawk; has a mahogany body and neck, and a maple top like a Les Paul; and it sports the P-90/Humbucker configuration of the Les Paul BFG. It has a very thin, yet highly resonant body, which gives the guitar a very light weight (~6 lbs), but has tons of sustain; it’s a just a little less than the sustain of a Les Paul, but a lot more sustain than a 335 to give you an idea the range of its sustain.

Tone-wise, the Nighthawk 2009 has a much fatter sound than a Les Paul. The P-90 is super-hot and produces a thick, rich clean tone, and ballsy overdrive, and the bridge pickup has lots of gain on tap, and is just a bit darker than the bridge pickup of a Les Paul.

  • Grade A two-piece mahogany body
  • Grade AAA “bookmatched” solid figured maple top
  • solid piece of Grade-A mahogany neck
  • Gibson’s traditional ’50s neck profile
  • Grade-A rosewood fingerboard
  • 12-inch radius
  • 22 frets
  • Figured, swirl acrylic dot inlays
  • P-90 Neck Pickup
  • Gibson’s 498T “Hot Alnico” Bridge Pickup
  • Two Gibson Gold Top Hat volume controls
  • 50’s-style pickup wiring (tone doesn’t bleed off highs as much & volume knobs both act as master volume)
  • Gibson Gold Top Hat master tone knob
  • Three-way toggle switch
  • 1/4” output jack made by Switchcraft
  • Pearloid tuning keys
  • Tune-o-matic bridge
  • Nitrocellulose Translucent Amber finish
  • Approximately 6 lbs

Pictures

Took these with my Nikon D40 and a f1.8/35mm lens, using available light to warm up the photos (though a couple were taken with a flash).

This slideshow requires JavaScript.

Sounds

I provided these in my original review of the Nighthawk, but rather than have you go back to the review, here they are:

Neck Pickup

Clean

Dirty Lead

Rock Rhythm

Both Pickups

Clean

Dirty Lead

Rock Rhythm

Treble Pickup

Clean

Dirty Lead

Rock Rhythm

Read Full Post »

While I did a “mini review” of the Mad Professor Deep Blue Delay a couple of months ago, that was in a shop in a controlled environment, and though I played it for almost an hour, there’s no better test of gear than using it at a gig where nothing is predictable.

After I originally auditioned the pedal, I anguished for the last couple of months about getting it. Why? Simply because of its price: It is NOT a cheap pedal by any means (I got it for $335), and it was always easy for me to reason why not to get the pedal. However, I’ve been a bit disappointed with my VOX Time Machine when using it with my acoustic rig. I thought that since it performed so well with my electric rig, that it would translate well to my acoustic rig. That couldn’t be further from the truth. Truth be told, while the Time Machine simply kicks ass with my electric rig, my tone feels and sounds “processed” with my acoustic rig. The net result is that I stopped using it for my acoustic gigs.

I knew I had to get a good delay that would work well with my acoustic rig, and I also knew that after auditioning quite a few digital and analog delays at the shop, it was the Deep Blue Delay that spoke to me. But the price of the pedal made me shudder, so I put off the purchase for the last couple of months.

Then yesterday, in a moment of weakness, I purchased the pedal on my lunch break at work. Jordan, the sales guy I’ve been buying gear from at Gelb Music for years, swears by this pedal, and he just said, “Dude, I know the price is steep, but there’s none better than the the Deep Blue Delay. It’s always on my board, and it’s almost always on. The VOX Time Machine is a killer pedal (he sold me that one as well), but you know how the Deep Blue sounded with the APX900 (Yamaha – I bought that one from him too – though he didn’t make a recommendation that time 🙂 ) when you tested it a couple of months ago. Believe me, you won’t be disappointed.” Mind you, I trust Jordan’s advice implicitly. I’ve been buying gear from him for years, and have learned that when he raves about some gear, it’s not bullshit because he owns it or has gigged with it. And with the Deep Blue Delay, I’ve never witnessed him rave so much about a pedal!

So I am now the proud owner of the Mad Professor Deep Blue Delay, and like Jordan, I can’t rave enough about it! What about my Time Machine? It goes back on my electric rig board. I love that pedal because it has such a great sound with whatever electric guitar I use on it. But for acoustic, it’ll be the Deep Blue from now on.

Fit and Finish

With a gorgeous, shiny, blue powder coat finish, this is simply the most gorgeous pedal I have. I’m partial to blue, but the gloss is like a mirror, as the photos below show. If I have one nit, the blue LED is a bit difficult to see in bright lighting conditions, but that’s just small nit. Other than that, the pedal is solidly built. The knobs have good resistance without being tight, and the toggle switch is heavy duty. I’m not sure what kind of jacks were used but connectors snap into place nicely, so I’m assuming they’re fairly high-quality jacks.

Taking the back off the pedal, there are LOTS of wires connected to a foam-wrapped circuit board (that I didn’t want remove), so it’s clear that the Deep Blue Delay is completely hand-wired, save for the circuit board. The wires are all fairly heavy-gauge with thick shielding, which speaks to the quality of components used in the pedal. I didn’t want to lift the foam pad because the wires were so heavy and I didn’t want to have to deal with putting them back into place. 🙂 Mad Professor could’ve easily used thin-gauge wires for this pedal, but I like the fact that they opted for the heavier gauge.

This slideshow requires JavaScript.

How It Sounds

I know that I use the words “awesome” and “incredible” on this blog. After all, this is a “best of breed” type of site. So let’s just assume that the pedal can be described with those words, and I’ll take a different tack and describe what that sound does to me.

I know a piece of gear is incredible when it just makes me close my eyes and soak up the sound it produces. That’s the effect the Deep Blue Delay has on me. The delay effect, even at high levels is always smooth, and amazingly enough sounds so natural. There is nothing processed about this sound. And unlike other analog pedals I’ve played, the Deep Blue Delay doesn’t get dark, which is what has kept me from getting analog delays in the past.

At last night’s gig, I turned a disaster into a way to fully evaluate the Deep Blue Delay. With my acoustic rig, since I don’t have too many pedals, I use my BOSS TU-2 to power up the rest of my pedals. But last night, I had forgotten that I removed the TU-2 to use at a gig last week, so when I opened up my pedal bag, I was shocked to see my TU-2 missing. Luckily, I had left my 9V plug in the bag, so I figured that it was a great way to use the Deep Blue. So I plugged my guitar into the pedal, and it went straight into my Fishman SoloAmp.

I set up the pedal with the Delay and Repeat knobs at about 2pm, and the Level at 9am so I could get a nice, ambient sound that didn’t dominate. That created a hall-like effect that was simply delicious. I kept it at that setting for several songs. Then just as an experiment, I upped the level to 11, and then the skies parted and a voice rang from the heavens, “You have found s a sacred tone!” 🙂 Seriously though, I was completely blown away by what the pedal produced. The repeats were on the speedy side and the decay was a nice tail without being overbearing, and at that level, the wet/dry mix was just perfect!

The wonderful thing about the Deep Blue is that it seems like there’s a pre-delay built into the pedal. The one thing that sets this apart from other delays I’ve used is that at anything greater than low level settings, you get delay going right away. But even at 11am, whatever I was playing, whether finger picked or strummed, didn’t start repeating until there was space – or at least that was what it seemed like. Of course, at higher levels, the delay kicks in right away, but despite that, what you’re playing is invariably clear and doesn’t get washed out by the repeats.

Overall Impression

In other words, this truly is an incredible pedal. I’m still smarting just a little from the price, but as I haven’t played a delay for my acoustic as good as this – ever – it is well worth the price! I originally gave the Deep Blue pedal a 4.75 Tone Bones rating because of its cost. But my thinking now is that if that’s what it costs to get this kind of delay, then that’s what it costs, and I’m so much happier playing with this pedal in my signal chain. I’ve re-rated it as a 5 Tone Bones pedal. If you can afford it, this pedal will not disappoint; in fact, I’ll wager that it’ll make you practically squeal with joy!

About the Photos

Another hobby of mine – and no, I don’t sleep all that much – is photography. With this hobby, I don’t aspire to be a professional photographer, but I do like to take good photos. These photos were taken with a Nikon D40 with a f1.8 35mm fixed-length lens. All shots were taken in manual mode. I don’t remember the settings, but I shot about 60 photos and picked what I felt were the best shots. Then I used Adobe PhotoShop Elements to crop the photos and did a minimal amount of color correction on a couple of them. I believe that unless you’re going to make artistic enhancements to photos, you should set up your shots so you can “print” them immediately without color manipulation; that is, set up your camera so you don’t have to compensate later.

I know, this is a guitar gear blog, but going forward, I will be doing my own photos of gear. What I love about this particular set is that my camera caught the wonderful reflections off the shiny powder coating of the Deep Blue Delay. I find that marketing photos tend to be a bit too sterile. This is the best-looking pedal in my collection, and I wanted to do its look justice.

Read Full Post »

Click for larger image

Sennheiser ew 172 G3 Wireless System

Summary: If you’re looking for a great instrument wireless system that is both easy-to-use and a snap to set up, look no further!

Pros: 1680 available frequencies make this ideal for busy RF venues. Super easy to set up sensitivity levels. Transmitter sports a metal housing, so durability shouldn’t be an issue. Integrated guitar tuner in transmitter – works great! 25Hz low-end response – great for bass!

Cons: None.

Features:

  • Sturdy metal housing (transmitter and receiver)
  • 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
  • Enhanced frequency bank system with up to 12 compatible frequencies
  • High-quality true diversity reception
  • Pilot tone squelch for eliminating RF interference when transmitter is turned off
  • Automatic frequency scan feature searches for available frequencies
  • Enhanced AF frequency range
  • Increased range for audio sensitivity
  • Wireless synchronization of transmitters via infrared interface
  • User-friendly menu operation with more control options
  • Illuminated graphic display (transmitter and receiver)
  • Auto-Lock function avoids accidental changing of settings
  • HDX compander for crystal-clear sound
  • Transmitter feature battery indicatation in 4 steps, also shown on receiver display
  • Programmable Mute function
  • Integrated Equalizer, Soundcheck mode and guitar tuner
  • Contacts for recharging BA 2015 accupack directly in the transmitter
  • Wide range of accessories adapts the system to any requirement

Price: $499 street

Tone Bone Score: 5.0 ~ I waited a LONG TIME to pull the trigger on a wireless system, and while I could’ve gotten a cheaper one that would work well, but it was hard to argue with the frequency coverage of this unit. The added features of a guitar tuner and EQ are great, but the ease of use factor really hit home with me as well.

As I mentioned above, I’ve been holding out a long time to get an instrument wireless system. When I finally pulled the trigger, I decided upon the Sennheiser G3 Wireless system; first and foremost because of the number of frequencies it has on tap, but honestly, also because it’s a name I trust as my performance mics are Sennheiser. I’m not being a cork-sniffer here. I swear by the brand because of the years of great performance I’ve gotten out of other Sennheiser equipment, so it stands to reason to trust it for something completely new.

As it turns out, true to my past experience with Sennheiser gear, there was absolutely nothing to be disappointed about with the wireless system. I took it to my church gig yesterday and it well, just worked, with no tweaking on my part; save for adjusting the sensitivity levels which I didn’t even think to do when I first opened up the box. In fact, I didn’t even read the manual when I took it out to try in my studio. I just attached the antennas to the receiver and plugged in the instrument wire into the transmitter, popped in the batteries, and let ‘er rip. It literally took less than a couple of minutes to get up and running. Insofar as my church gig is concerned, it was a great venue to put the unit through its paces, as there are potentially several wireless units in operation at one time, including my own wireless headset mic. I’ll talk more about the system’s operation below.

In any case, since this isn’t something that actually makes music, my review areas are going to be a bit different from my normal reviews.

Ease-of-use

As I indicated above, the unit’s pretty plug and play. But of course, you should check the sensitivity of the transmitter and receiver to make sure you’re not overdriving the unit. The LCD’s on both the transmitter and receiver makes setting sensitivity of either unit a snap. Both have an active meter and navigating to the sensitivity menu is just a couple of button presses. Sennheiser did a great job with the menus to make them only two levels deep, so you won’t have a problem getting to the parameter you need to set.

Durability

Both transmitter and receiver have very sturdy metal housings, so you needn’t worry about the units cracking. The transmitter has a real solid feel, and that instills confidence that you don’t have baby the unit, though of course, it’s always good to take care of gear.

Performance

Despite having 1680 UHF frequencies to scan, the receiver locks on to a usable frequency almost instantaneously once you turn it on. That is such a boon to using the unit. You switch it on, and you can use the unit.

One of the tests that my sound guy and I did was for me to walk a distance away from the receiver to see if it lost connection. I honestly don’t know what the maximum range is, but no matter how far I got away – I got about 100 feet away – the transmitter and receiver didn’t lose their connection to each other.

To save battery life, when I’m not playing I always switch off the transmitter on my headset mic. I did the same with the G3 in between songs. Every time I switched it back on, making a connection to the receiver only took a couple of seconds.

Final Verdict

I haven’t even begun to explore all the different features that this system has; one of which is a cable emulation mode that simulates a cable’s capacitance to ensure consistent operation of your effects and amp settings whether you’re plugged in or wireless. This a great feature. Admittedly, I didn’t use this, but my rig sounded pretty much the same with the same dynamics once I dialed in the sensitivity of both transmitter and receiver. Or it could be that the only thing I obsess about with my tone is if it sounds good and I’ve got dynamics. Minute changes due to changes in my chain don’t really bother me too much. So if I got a slight change in tone, since my sound with the G3 system was good with no loss in dynamics, it didn’t trigger anything displeasing with me.

But other than performance and sound and all the other stuff I discussed, going wireless is simply fantastic. I like to move around a lot when I perform, and not being tied to a spot by a cable is so freeing! It really boosted my ability to lead musical worship, and that is so COOL!

Read Full Post »

When you’ve got a guy like Lance Keltner singing the praises of your equipment and calling you a genius to boot, you must be doing something right. Jeff Aragaki of Aracom Amps is someone I’ve been praising for quite awhile, and I’m glad he’s finally getting the recognition he deserves.

As far as the DAG unit is concerned, that’s available exclusively through Destroy All Guitars. I’ve played through one of those units myself, and the high-cut filter works great, and definitely takes the edge off, without throwing a blanket over your tone and dynamics like many attenuators do that include one. If you have an amp that outputs lots of highs when cranked – or somehow hear high-frequency transients –  then the DAG unit is the way to go.

Coming up…

While Jeff has gained lots of popularity with his attenuators, often overlooked are his wonderful amplifiers of which I have three. In the next couple of days, I will be getting a 50 Watt Evolver to test out in my studio. I’m so excited! I’ve played through an Evolver at Jeff’s workshop and that amp has tons of balls! It’s definitely Marshall-esque, but with Jeff’s particular twists. I’m excited to be getting this unit for a full test!

Read Full Post »

Click to enlarge. Sorry, phone pic


1987 Gibson ES-335 Custom St (St = Standard? Studio?) Summary: A rare beauty with a natural blonde finish with classic ES-335 tone!Pros: Absolutely tip-top shape for a guitar of this age. No major dings, but has been well-played. Sounds amazing!Cons: None.Features:

  • Mahogany neck
  • Bound carved flame maple top and maple sides and back
  • Bound ebony fretboard
  • Medium jumbo frets
  • Bone nut
  • Original chrome hardware (look like Tone Pros)
  • Original chrome pickup covers
  • 60’s-style lower profile neck
  • 50’s-style pickup wiring (either volume knob acts as a master, but the tone controls have a different cap value that doesn’t throw a blanket over your tone when you turn it down – this is crucial for playing in the bridge pickup).

Tone Bone Score: 5.0 ~ This guitar sounds and plays like a dream! While the action is a just a tad higher than I like it, the guitar still plays ultra-smooth.

I already talked about how I happened to get this guitar, so I won’t bother rehashing the details. Suffice it to say that I got this guitar for an absolute steal. In a way, this guitar is sort of redemption for me having sold my original ES-335 a couple of years ago when times were tough. So getting this guitar is a real milestone for me.

Fit and Finish

For a 23 year old guitar, it is in absolutely amazing shape. The body has some very minuscule dings in it that fortunately don’t penetrate the finish. I didn’t notice any checking in the gloss either, though that may occur after a few more years if the finish Gibson used was a nitro lacquer. The hardware is aged as to be expected, though there’s a little oxidation in the brass stop tailpiece that can easily be removed. The pick guard has pick marks on it, but no scratches and all the joints are perfect. There’s some fret wear, but nothing major where the frets would have to be replaced. As for the fretboard itself, it’s gorgeous. I love ebony fretboards as they’re so smooth to the touch, and it makes bending a breeze. The back of the guitar has a few nicks that don’t penetrate the finish – and no buckle rash. All in all, for as much as this guitar has been played, I’m just amazed at its overall condition.

Here are some pictures I took with my cell phone. Sorry if the quality is low. I’ll have better ones later…

How It Sounds

This guitar has all the tone I was expecting out of an ES-335, but as it has been broken in and the wood aged, the tone is A LOT richer than what I remember with my original ‘335. As far as pickup positions go, there are three as usual, though I understand that some models did have coil-tapped humbuckers; not this model, though.

I’ve always loved the gorgeous, deep tones of the neck pickup on an ES-335 and this guitar doesn’t disappoint in that department. This is where the ES-335 gets very close to the deep, rich tones of an archtop, but it’s well, different…

Kicking in the bridge pickup in the middle position gives the ES-335 its distinctive “hollow” tone. It’s really hard to describe, but that I’m a firm believer that that middle pickup selector position is what draws people to this guitar. It certainly is one of the main things tonally that originally drew me to the ES-335 in the first place! With the bridge dimed and adding more or less neck pickup, you can get tons of great tones!

The bridge pickup is bright as to be expected – perhaps a bit too bright – but the wonderful tone knob nicely takes the edge off the brightness. I did notice that the bridge pickup is not significantly louder than the neck pickup, which leads me to believe that the original owner lowered the height of that pickup. When I get home from vacation, I’m going to raise it a bit because I prefer to have that dramatic change in volume.

In any case, here are some clips:

Neck pickup, clean

I love the haunting character of the neck pickup on and ES-335. The wonderful thing about this pickup is that it produces a very deep tone, without sounding like an acoustic. Adding a little reverb “grease” only accentuates the haunting effect.

Middle position, with some grind for rhythm; bridge pickup for lead.

In this, I have the bridge dimed, and the neck about halfway for the rhythm part. The lead is just the wide-open bridge pickup. Notice that it’s bright and almost twangy.

Middle position, clean; both rhythm and lead

I had to do a bit of a tribute to the great Andy Summers with this last clip… 🙂 I added a touch of reverb and chorus to get that “Every Breath You Take” vibe.

For all the clips, since I’m on vacation, I don’t have an amp, but I always carry around an IK Multimedia StealthPlug to facilitate my songwriting or, in this case, create clips. I used AmpliTube Fender. For the clean clips, I used a ’65 Twin Reverb model, and for the crunchy clip, I used a ’59 Bassman.

Cool Funk Lead

There are two parts to this next clip. In the first part, I play in the neck position, then switch over to the bridge in the second part plus attack a lot more. Unlike a Les Paul, the 335 doesn’t sustain as much, but that’s not a bad thing. The net result is that overdrive tones tend to be much more tight and focused. BTW, the amp used here was an Aracom PLX18BB in its drive channel.

Overall Impression

This guitar really moves me. She plays so sweet and sounds so good that I truly am inspired. Of course, the price I happened to pay for it didn’t hurt at all, but irrespective of my price, I’d still give this guitar 5 Tone Bones. It’s really an incredible guitar! I can’t wait to get it home and to a luthier for a professional setup. The shop owner did a pretty good job of setting the guitar up, but he strung it with 11-53’s which, while certainly playable, aren’t really my cup of tea. I’ll have the shop put on a set of pure nickel 10’s.

Read Full Post »

Or… you never know what you’re going to find on vacation…

Click to enlarge. Sorry, phone pic

I’ve been up at Clear Lake, CA since this past Saturday, and wouldn’t you know it, on Sunday morning when the family and I stopped off at a Safeway in Lakeport to get some provisions, the shopping center just happened to have a musical instrument store called Bandbox Music. Of course, gear freak that I am, I couldn’t pass up looking into the window to see what the shop was like. As Lakeport is a small town, I wasn’t expecting to see much, but what the heck! You never know what you may find!

As I walked up to the window, I noticed a gorgeous, natural-finish Gibson ES-335 in the shop’s front case. I could tell that it was used, but it was in practically pristine condition, save for the pickup covers and stop tailpiece which were tarnished; otherwise the guitar looked great. I could tell that it had been played a lot, but the original owner had taken care of the finish for the most part as from the distance of about 6 feet that I was standing from the case, the only wear I could see where pick marks on the pick guard. Unfortunately, the shop wasn’t open on Sundays, so I made it a point to return to the shop the next day to check it out.

Couldn’t make it Monday, but we were going to Lakeport on Tuesday so the family could check out the town. So on the way to downtown, I had them drop me off at the shop. I walked in and was greeted by a bunch of elderly gentlemen sitting around, shootin’ the breeze. I didn’t want to interrupt their conversation, so I waited patiently until the shop owner asked me if I needed help. I pointed to the ES-335 and said that I’d like to give it a whirl. He graciously responded and removed the guitar from the case, and instructed me to grab a cord.

Ron, the shop owner, proceeded to tell me about the guitar in that it was a 1987 ES-335 Custom Studio. He got it from the son of the original owner (more on that sad story later). He showed me the case, which was the original case it came in, along with the Gibson warranty papers, and the original Guitar Center invoice. While he spoke, I did a visual inspection of the guitar. There were a few miniscule dings on the back, and a couple on the front, but nothing that penetrated the finish. I remarked to Ron that the guitar was in remarkable shape, and he said it was owned by a player, and that guy took care of the guitar.

It probably sat for quite awhile in a closet somewhere, as the metal was tarnished – the original owner probably played it so much that he never bothered to clean it. Ron said he spent a lot of time cleaning the guitar when he got it, but was really surprised at the shape the body was in – so was I! Anyway, I plugged her in, tuned her up, tweaked the amp, to a nice clean with a little reverb “grease” and was immediately greeted with that distinctive rich, full tone that only an ES-335 can make. I was in tonal heaven!

The ES-335 and I have a history. When financial times were rough for my family, I had to sell my original 2003 ES-335 for some cash. When I did that, I swore that I’d never sell one of my guitars again. Hearing that guitar and how it sang reminded me of “Rusty.” Rusty was my first high-end guitar. I was so proud to have him, but putting food on the table was more important at the time, so I had to let him go. This ’87 would be redemption if I got her.

After playing her for well over an hour, I finally asked Ron how much the guitar was. He said $1200, but he knew it was worth far more than that as he had seen the exact same model in similar condition going for almost triple the price on EBay. I was taken aback by the price! I keep tabs on many guitars, and I knew he was in the ballpark with how much it was worth. He said he didn’t get it for much (I didn’t ask his buying price out of politeness), so he was willing to move it for far less than its market value.

I didn’t do the impulse buy right then and there, and told him I needed a couple of days to think about it, and I’d roll the dice and let it go back into the case. Over the next couple of days I did some research on the guitar. The first place I looked was on EBay, and sure enough, the same make, model, and year ES-335 has an asking price of $3500! I looked at several ES-335’s from the surrounding years, and they’re also going for similar prices!

So I made my decision, and called up Ron this morning and asked him to put the guitar aside, as I’d go to the shop later today. Ron repeated the price of $1200 and I said, “That’s the price you quoted Tuesday.” So I got it for $1200 OUT THE DOOR – no tax! OMG!!! I can’t tell you how jazzed I am about this absolute steal, but I think the best thing about it is that I didn’t have to make a lowball offer. Everyone won in this transaction, and that really pleased me as well!

Wow! Sorry, I got a little carried away… But I do want to tell a little history of this particular guitar…

Don’t know the name of the original owner, but he was a apparently a smalltime pro player. He passed away last year, and left his son his two guitars, a Les Paul (which Ron sold), and the ES-335, which is apparently what he played the most. According to Ron, the son came in to sell the Les Paul first, then a couple of weeks later returned to sell the ES-335. Ron doesn’t know exactly what the son was going to do with the money, but as there’s a real crystal meth problem in the area, he could make a fairly educated guess. That’s sad to me, and it’s this lesson that I want to pass onto my kids: Don’t sacrifice your family’s heritage to satisfy a personal craving. You’ll just end up regretting it.

By the way, I’ll have pictures and sound clips in my next post. 🙂

Read Full Post »



Peavey Classic 30 Amp

Summary: Great looks, great sound, and at a GREAT price!

Pros: Beautiful cleans with a sweet, airy reverb, and smooth overdrive tones

Cons: This is a nit, but I was a bit annoyed at the labeling of Pre- and Post- volume controls on the Lead channel. Why not just follow convention? It’s obvious that “Pre” is volume, and “Post” is master. But when I first saw it, I wasn’t quite sure what to make of them until I turned the amp on.

Features (from the Peavey site):

  • 30 watts (rms) into 16 or 8 ohms
  • Four EL84s and three 12AX7s
  • 12 inch Blue Marvel® speaker
  • 2-channel preamp
  • Pre- and post-gain controls on lead channel
  • Normal volume control on clean channel
  • 3-band passive EQ (bass, middle, treble)
  • Boost switch
  • Reverb level control
  • Effects loop
  • Footswitch selectable channel switching and reverb
  • External speaker capability
  • Chrome-plated chassis
  • Classic tweed covering
  • Footswitch optional (not included)
  • Weight Unpacked: 39.50 lb(17.917 kg)
  • Weight Packed: 46.00 lb(20.865 kg)
  • Width Packed: 13″(33.02 cm)
  • Depth Packed: 21.5″(54.61 cm)
  • Height Packed: 19.25″(48.895 cm)

Price: $599 street

Tone Bone Score: 5.0 ~ Even my little nit couldn’t keep this amp from getting my top score. It’s simply a great-sounding amp!

I’ve been a big proponent of: If it sounds good to you, then brand and price don’t matter. This goes back to my very first guitar, a Yamaha FG-335 Acoustic that my dad bought me for my 18th birthday. I still have that guitar. But I remember a jam about 25 years ago I was having with my brother at a party. We were sitting in our living room, and we pulled out our guitars to have a jam and singalong. When I got my guitar out of its case, my brother remarked facetiously upon seeing its worn condition, “Dude, you should turn that into a beach guitar.” I just looked at him blankly and replied, “Nope. It may not look like much, but it has a great sound. Why the f&%k would I want to trash it? I’ll never get rid of this guitar!” Ahh… brotherly competition. 🙂 But I digress…

The point of me mentioning that is that nowadays with boutique gear being all the rage with “tube” this, “mustard cap” that, “hand-wired” this, etc., it’s so easy to dismiss some excellent gear that sounds absolutely KILLER! If you can get said killer-sounding gear at a fantastic price, then that’s even better. Now I admit that I have some expensive gear, but not once have I purchased gear because of a name or because someone told me to buy something because they love it. I suppose with this blog you might accuse me of doing just that, but I always suggest people try things out for themselves before making any buying decisions. Damn! Again I digress! Let’s get on the with the review, shall we?

Fit and Finish

Talk about vintage mojo! The first time I saw this amp in a local shop, I was stunned by its looks. With its vintage-style front panel and dark brown cloth grille, and tweed covering with chrome-plated corner protectors; what’s not to like? Weight-wise, at 40 lbs, it’s not light, but it’s also not a behemoth that you can’t lug easily into a gig. And don’t let the small size of its cabinet fool you: It’s quite resonant, but more importantly, its size doesn’t make it unweildy in the slightest. Simply put, the Classic 30 just plain looks great!

How It Sounds

In my test, I used a Squier Classic Vibe Tele 50’s, a Custom Shop Strat, and a Les Paul Standard. I always start out all my tests with the amp clean, and playing finger-style. No matter what guitar I used, the cleans were absolutely spectacular. I love EL84 cleans. They’re sparkly and chimey, and the Classic 30 simply delivered that EL84 clean goodness! The single coils sounded chimey as expected, but I totally dug the cleans with the LP! Adding a bit of grease with the reverb brought out the  lush, deep tones of the Les Paul nicely. I believe the reverb is a digital reverb, but who the hell cares? It sounds incredible! I guess that’s the point I was trying to make above. If something works well, it doesn’t matter what it’s made of.

As far as overdrive is concerned, as its name implies, the Classic 30 isn’t going to get you modern high-gain overdrive tones, but there’s tons of overdrive on tap. Once I dialed in the Pre and Post volume control balances, I was able to get nice overdrive tones that weren’t at all harsh, no matter how hard I pushed the amp. Since I was in a shop, I didn’t get a chance to record clips, but here are some clips from Peavey:

Clean

Clean, Reverb

Channel 2 Flat

Channel 2 Preamp

Channel 2 Boost

As you heard, great tones out of this little beastie. Even completely dimed, you don’t get over the top overdrive, but for classic rock and blues, this is a GREAT amp. That Blue Marvel 12″ speaker works great in this cab!

Overall Impressions

At $599, this amp looks and sounds as good as many boutique amps I’ve played. I love this amp, and it’s definitely going to be added to my amp collection. 🙂 I didn’t get to try out the effects loop, but I love the fact that it has one. It just adds to its versatility. If you’re looking for a vintage-style amp for a great price, this is definitely an amp to consider!

Read Full Post »

Wow! Who woulda thunk it? The latest issue of Premier Guitar has a great review of the Aracom PRX150-Pro Attenuator. If you receive the magazine, it’s in the latest issue, but here’s the review online. Here’s the reviewer’s final mojo:

Sonically, the Aracom PRX 150-Pro attenuator stayed very true to every amp I paired it with. My tone stayed stable as I lowered the dB level to its minimum amount (the variable control doesn’t turn the sound completely off). Even super-quiet bedroom settings sounded very good and responded to picking and touch extremely well. This attractive, sturdily built unit would be a great addition to any guitarist’s tone arsenal.

PG gave it a 4 out of 5 picks which, for them is a great rating. I’m so happy for Jeff Aragaki that he was able to get a major guitar mag like PG to do a review on the unit. And the reviewer’s positive feedback just affirms what those of us who have one know: No other attenuator maintains the feel and dynamics of our amps at any attenuation level.

Read Full Post »

« Newer Posts - Older Posts »