Feeds:
Posts
Comments

Posts Tagged ‘overdrive’

IK Multimedia Stealth Pedal

For those computer-based DAW jockeys, you know about IK Multimedia’s Amplitube software. I recently wrote a review of Amplitube Fender Edition, and loved it. Now I have an even bigger reason to love it, and that’s IK Multimedia’s StealthPedal which looks like an expression pedal but is actually a fully-functional, USB-powered audio interface WITH a built-in expression pedal. How friggin’ cool is that?

Folks, this thing works, and it works well, as my full review, which will be released in a few days will bear out. As an audio interface, it may not have a lot of bells and whistles, but for the home recording studio buff, this is a great, affordable, high-res audio device that can take a direct in from your guitar or pedal board, or a line out from a pre-amp to use for layering tracks.

But because the pedal has the ability to act as a controller for any “Powered by Amplitube” software or plug-in, you may not even need an amp to record your guitar parts! There are enough fantastic-sounding amp models packed into the various Amplitube packages that you’ll be sure to find a model that works for you. Plus the software effect plug-ins that the StealthPedal can control give you added tone shaping abilities.

In my impending review, I’ll have more clips to share, but here’s a “torch song” that I’ve been working on that features the StealthPedal in action as an audio interface:

Except for the drum loop, all the instruments were recorded using the StealthPedal as the audio interface. I did a line-in directly for the electric piano. For the guitar parts, the amps are both software amps! For the rhythm part I used a Fender Champ 600 with a virtual compressor rack plug-in and my Strat plugged directly into the StealthPedal. For the lead part, I plugged into my pedal board and used my Tone Freak Effects Abunai 2 overdrive, and a Hardwire RV-7 Reverb. For the amp, I used a ’59 Bassman model. Imagine that! Software that sounds this good!

I know, nothing sounds like or feels like a real amp, but the convenience and the general sound quality of these models, plus the high-fidelity of the StealthPedal isn’t lost on me. It’s a nice, compact audio solution that combined with the software, will definitely make a difference in how you approach recording guitars.

Stay tuned for my full review!

Read Full Post »

Tone Freak Effects Abunai 2I’ve been playing my Prestige Heritage Elite so much lately that I forgot how fun it was to get funky with my Strat. So this morning, I plugged my Strat into my board, switched on the Abunai 2, and found a sweet spot that would give me just a bit of grind when I played single notes with nice grit when I dug in or played chords. Then I started playing this little funky riff that I just laid down.

I just can’t get over how good this pedal sounds with any guitar! With my Strat, I’ve always tended to play it much more clean than my other guitars. The ’57 Tex Mex pickups – at least to my ears – have never sounded very good with overdrive. I’ve always felt the drive was harsh. But the Abunai 2 really smoothens out the drive, and now I’m diggin’ playing with some real grit on my Strat.

By the way, if you missed the first clip I recorded using my Heritage Elite, here it is below:

My Aracom VRX22 just loves this pedal as well. Some might argue that with such a great amp that has a fantastic overdriven sound that I should be using the natural overdrive of the amp. In answer to that, sometimes I want a completely different overdrive character than what my amp has to offer, and an overdrive pedal through the clean channel of an amp has a totally different character than the drive channel.

Also, in a home studio environment where I have to keep the volume down, an overdrive pedal allows me to get some snarling-dog overdrive without having to crank my amp. And with a pedal like the Abunai 2 that simulates voltage sag and tube compression so well, I can get that cranked amp tone at bedroom levels!

Anyway, I hope you enjoy the clips!

For more information on the Abunai 2, and for other Tone Freak Effects pedals, please visit the Tone Freak Effects web site!

Read Full Post »

5 Tone Bones - Gear has stellar performance, value, and quality. This is definitely top of the class, best of breed, and it's a no-brainer to add this to your gear lineup!

Tone Freak Effects Abunai 2

Tone Freak Effects Abunai 2 Overdrive Pedal

Summary: In Japanese, “abunai” means dangerous, and this pedal’s overdrive tones are indeed dangerous – at least to your other overdrive pedals. With three switchable clipping configurations, you can dial in a myriad of overdrive characteristics that’ll suit any situation, be it live or in the studio.

Pros: The magic’s in the three-way clipping configuration switch. Super simple to use, and very easy to dial in the kind of overdrive character you want.

Cons: None

Price: $199 (through dealers – check out the Tone Freak Effect Contact Page)

Specs:

  • Controls: Drive, Tone, Level
  • 3 clipping configurations
  • True Bypass
  • Neutrik jacks
  • Teflon coated, silver stranded wire
  • Mil-spec PCB
  • Metal film resistors
  • Metal film capacitors
  • Hand assembled

Tone Bone Score: 5.0 – As I shared with Dereck Tabata (maker of Tone Freak pedals), with the amount of gear that I run across, I’m rarely blown away by pedals. But I was completely blown away by the Abunai 2. Step aside Tube Screamer, there’s a new sherriff in town.

One rainy friday night several months ago, I was sitting in an Armadillo Willy’s eating my dinner and surfing the web, while waiting for my son’s hockey practice at the rink across the parking lot to end. I was doing what Internet geeks like myself occasionally do: Search for available domain names, and reserve them, just in case I want to build a site or point them to this blog. In this case, I did a google search on “tone freak.” The first listing was for Tone Freak Effects; an effects manufacturer I had not even heard of at that point.

Being the gear slut that I am, I just had to mosey on over to the Tone Freak site, and check out what they had to offer. And much to my extreme pleasure, they had a bunch of overdrive pedals, my favorite kind of effect! I immediately reached over to my laptop bag and pulled out my ear buds so I could listen to clips. The first set of clips I listened to were recorded with the Abunai 2. From the very first clip, I felt that this pedal was something special. It wasn’t a Tube Screamer tone – it was something altogether different. It had a much “ballsier” sound than a Tube Screamer, but seemed to clip very similarly – at least in the middle position.

Well I got one in for review just yesterday, and from the moment I hooked it up to my board and started noodling, I was in love!!! And by 2am this morning, I was spent, which accounts for why I’m doing a review of the Abunai 2 the very next day. I just couldn’t stop playing (though after the first hour I did stop to take a break and write a First Impressions article)! So today I’m a bit fuzzy and a little worse for wear, but grinning from ear-to-ear because I just spent the previous evening in absolute overdrive bliss! I know some gear is good when it can consume my attention for hours on end. This is the perfect overdrive pedal!

Features and Ease-of-Use

The features are listed in the summary section above, but the most special feature of this pedal is the three-way mini-toggle set between the drive and volume knobs. This controls the variable clipping section which gives you symmetrical, asymmetrical, and no clipping to open up lots of different overdrive tones. As far as ease-of-use is concerned, this pedal’s easy to use. Select the clipping configuration you want, adjust level, gain, and tone, and you’re off to the races!

Interestingly enough, I wanted to get some background information on the pedal before I received it, so I had a nice conversation with Rob at Tone Merchants about the Abunai 2. He indicated that I’d have to spend a lot of time dialing in just the right overdrive tone I wanted, but once I got it, I’d be totally happy. Call me lucky, but I set everything in the middle position to start with, spent maybe 20 seconds twiddling the knobs, and found a sweet spot. I suppose it also all depends on how discerning or nit-picky you are… I’ll just call it luck for my experience. 🙂

How It Sounds

Many words come to mind with respect to how the Abunai 2 sounds: Killer, Inspirational, Ballsy, F-in’ Incredible! All of the above. To date, this is the best-sounding overdrive pedal I’ve ever played, and I’ve played a lot. You know how taken I was with the OCD, but even that lost out to the Holy Fire, which is yet another killer overdrive/distortion that will never leave my board – actually I shouldn’t say “never” because that’s exactly what I said about my Tube Screamer. It’s not transparent – at least not nearly as transparent as the Holy Fire – but the tone it produces is so damn sweet, who the hell cares about transparency? But that said, the tone of your amp doesn’t really change a lot. It just takes on a slightly different character, and that difference is simply wonderful

No matter what toggle position you go with, the Abunai 2 serves up lots of sustain that gives the resultant tone a very 3-dimensional quality. It’s in your face, but at the same time it’s very spacious – even when it’s simulating tube compression!

In case  you missed the previous article where I described how each position sounds, let me rehash it here. Note that I’m not going to try to identify which position refers to symmetrical, asymmetrical or no-clipping; only what it sounds like to my ears.

Middle

The middle position sounds much like a classic overdrive tone. It’s an open type of distortion tone with a nice grind that’s never harsh. This could be the closest you get to a Tube Screamer tone, but it’s significantly different from that tone. This is a great toggle position for playing dirty rhythm parts.

Left

To my ears, this position sounds much like the tone you get as your power tubes start to saturate. You get a bit more voltage sag, resulting in more sustain and compression, but the overdrive tone still remains fairly open. And like an amp whose power tubes are starting to saturate, you get a slight volume drop. So far, this has been my favorite toggle position for leads.

Right

This position simulates fully saturated power tubes adding tons of compression, tons of sustain, and the expected drop in volume as a result -it’s spongy. I compensated for this by adding some clean boost to get the volume back to unity gain. But despite that, notes are clear, and the dynamics are still incredible.

Here’s a sound clip I recorded at around 1am this morning. I played both parts using my Prestige Heritage Elite. For the rhythm part, I set the toggle in the middle position, rolled off the drive to about 10 am, set the gain to unity, and placed the tone dead-center. I had both my ‘buckers engaged for this part. For the lead, I used the left toggle position, upped volume to about 2pm, set the Tone wide open, and set the Drive to about 1pm. The lead was played through my bridge pickup.

I tracked the rhythm part in a single take, and then loop recorded the lead so I could just jam. I’m not sure what iteration the loop was in when I finally stopped. All I know was that it was about 2am, and I took the last “take” and exported the clip to an MP3.

Overall Impressions

As I mentioned above, my head’s fuzzy, I’m a little worse for wear, plus my fingertips hurt from playing so long last night. But what the hell! I was in complete tonal bliss! The Abunai 2 is an absolute dream come true in overdrive tone! This is a pedal that you just have to check out if you’re in the market!

Read Full Post »

Tone Freak Effects Abunai 2 In my ever-constant search for new gear, I accidentally stumbled upon Tone Freak Effects, a little boutique effects shop in Southern California. And you know me, I DIG OVERDRIVE pedals!!! I know, I say that a lot, but I really do. When I listened to sound clips of the Abunai 2, I knew it was a pedal that I had to check out, so I contacted Tone Freak, and asked to do a review on one of their pedals. Dereck Tabata, maker of the effects, emailed me back and offered to have me review the Abunai 2. That was exactly the pedal I wanted to try out because based upon the sound clips of the Abunai 2 Dereck had on his site, it sounded absolutely killer.

Well after a moderate wait for Dereck to set up his new company and for him to create enough stock to send one out, I finally got my review pedal. I just got done playing with it for the last hour, and was so excited by its tone, that I had to release a first impressions article.

So I’ll just say this: After many years, my Tube Screamer is going to get retired for awhile. Mind you, I didn’t say I’d get rid of it. There is something about that Tube Screamer tone that I will always love. But even after just an hour of playing with the Abunai 2 and discovering just a fraction of the plethora of tones it can produce, I think I’ve found an overdrive pedal that I love as much or perhaps even more than the Tube Screamer. I know… I never thought I’d say that.

Let me give you a quick rundown of the Abunai 2…

When you first look at this pedal, you’re totally taken in by the absolutely cool purple, sparkly paint job. The picture here doesn’t do the pedal justice at all. Then you notice that it has a three knob setup, just like most overdrive pedals. Then you plug the pedal in, and that’s where the magic starts. That magic comes from the three-position mini toggle that gives you overdrive tone-shaping possibilities you never thought possible. These three positions give you very different overdrive characteristics. No matter what position you’re in, the tones this diminutive pedal produce are about the most incredible tones I’ve ever heard in an overdrive! Freakin’ awesome! Let me quickly go over each different position.

Middle

I’m starting with the middle position because that position provides that classic overdrive tone. It’s not a mid-range hump like a tube screamer. Like the Creation Audio Labs Holy Fire, the full spectrum of the EQ is represented. The distortion characteristics are pretty open in this position, and the pedal reacts very much like an overdriven tube amp.

Left

This position seems to simulate distortion when the power tubes start saturating and you get just a tiny bit of compression. This lowers the volume just a tad, but it increases the sustain. But the distortion is still open – so far this is my favorite toggle position.

Right

Metal rockers will love this toggle position. This position simulates fully saturated power tubes adding tons of compression, tons of sustain, and the expected drop in volume as a result. I compensated for this by adding some clean boost to get the volume back to unity gain. This is a VERY fun position to play in (that sounds kinda kinky…). Notes just sing and sing and sing in this toggle. But the cool thing is that despite the incredible amount of compression, the pedal maintains a lot of clarity in individually picked notes.

What a great first impression! This pedal totally kicks ass, as I’m sure Dereck’s other pedals do! It’s no small wonder why Greg Howe uses a Tone Freak Buff Puff! When I do my full review, I’ll have sound clips to demonstrate the differences in the tones between the different toggle positions! Rock on!

For more information on this and other Tone Freak Effects pedals, go to their web site!

Read Full Post »

4.75 Tone Bones - Almost perfect but not quite

Barber Direct Drive

Barber Direct Drive

Barber Direct Drive

Summary: The Direct Drive is a nice, fairly transparent overdrive that maintains your amp’s tone that can produce mild grit to over-the-top, searing gain that sustains for days. 

 

Pros: As overdrive pedals go, this pedal sounds great, and with internal trim pots you can adjust the bass response and presence. This ain’t a Tube Screamer clone by any stretch of the imagination. Plus, it’s handmade and at a GREAT price!

Cons: A little noisy with single coils and P-90’s.

Price: $119 direct

Specs:

Volume, Tone and Drive knobs
Internal Trim Pots to adjust bass response and presence 

Tone Bone Score: 4.75 – I really like this pedal! It’s fairly transparent and clear, and except for a bit of noise with my Strat and PRS SE II Soapbar, this OD delivers great tones at any volume!

If you read this blog with any regularity, you know I have a thing for overdrive pedals; especially in a small home studio like my own, a good overdrive pedal really helps get that drive tone when you have to play at bedroom levels. Unfortunately, not all drive pedals behave well at low volumes. I would have to say that a lot of my overdrive purchasing decisions have been driven (excuse the pun) by how well they perform in low volume situations like a home studio. I’ve played several drive pedals over the years, and while almost all sound great when an amp is pushing some serious air, there’s only a select few that perform well at much lower volumes. So I’m happy to say that the Barber Direct Drive falls into the latter camp!

Ease of Use

What could be more easy? Three knobs for Volume, Tone and Gain. Just dial in the amount you desire of each, and you’re off to the races. But the Direct Drive also provides a cool push-pull pot with the Tone knob that engages what Barber calls “Fat Harmonics” mode for what they call the “Expensive California” amp tone. It’s another way of getting more high-end sparkle and emphasis on overtones and harmonics; much like the Fulltone OCD that has it on all the time. But wait! There’s more! 🙂 Inside the box are internal trim pots for adjusting bass response and 

How It Sounds

It’s certainly fatter sounding than a Tube Screamer, even though Barber claims in their manual that a certain knob setting is an “808 killer.” I tried the Direct Drive at that setting, and it’s close, but sorry, no cigar. But that’s not a bad thing! The Direct Drive has a very distinct personality and definitely a sound and voice all its own! I did mention in the Summary that it’s fairly transparent. It is, but nowhere near as transparent as the Creation Audio Labs Holy Fire which is just about the most transparent overdrive I’ve ever played! But again, that’s not a bad thing. The overdrive characteristics are a bit tighter than a Fulltone OCD and much more even EQ-wise than a Tube Screamer; like I said, it has its own voice.

Here’s a clip I recorded. The rhythm part features a Strat. The Direct Drive’s volume is at unity, tone is dead-center, and Drive is about 10 am to get just a tiny bit of overdrive. The solo employs my Prestige Heritage Elite. The box’s volume is still at unity, tone is about 1 pm, and the drive is set to dead-center. This produces a nice, smooth grind, and lots of sustain.

By the way, the cool thing about that clip is that it was recorded at bedroom level, with my ribbon mic about 2 inches from the grille cloth! For the pedal to create that drive sound at that level is amazing!

Overall Impressions

This is a real kick-ass pedal, and I do have to say that in low-volume situations, this has got to be one of the best sounding drive pedals I’ve played. I dig it!  This is not a pedal I’d just at high gain, gig volume situations. It’s not that the tone is bad, but even though Barber has removed some of the compression characteristics in the later models (the old ones were pretty thick in comparison, apparently), it’s a bit too tight at high gain, especially when you need to punch through a mix. Besides at that volume level, I tend to stay away from my overdrive pedals altogether and just use my Creation Audio Labs Mk.4.23 booster (the best, most transparent booster on the planet, IMO) to slam my pre-amp tubes. 

But for general overdrive duties, this is a great pedal. I actually love its fatter tone when playing in low-volume venues, and for a street price of $119, and being hand-wired to boot, this is a pedal that I don’t think I can ignore! Neither should you! 🙂

Read Full Post »

5 Tone Bones - Gear has stellar performance, value, and quality. This is definitely top of the class, best of breed, and it's a no-brainer to add this to your gear lineup!

Aracom Amps VRX18 18 Watt Head

Aracom Amps VRX18 18 Watt Head

Aracom Amps VRX18 Watt Head

Summary: Based on the original “RoxBox” (no longer available), the VRX18 sports an improved master volume inherited from the VRX22, and a reworked, smoother overdrive profile.

Pros: As dynamic and expressive as its 22 Watt sibling, the VRX22, but oozing that bright, chimey EL84 goodness. When driven, produces a nice, tight overdrive.

Cons: None.

Price: $895 direct

Specs:

– (2) EL84 Power Tubes
– (2) 12AX7 & (1) 12AT7 Preamp Tubes
– S.S. Rectifier with “sag” circuit
– Hi/Low B+ voltage switch (18/9 watts)
– On/Off Switch
– Indicator Lamp
– Custom Heavy Duty Aluminum Chassis
– Custom Wound Transformers
– 4, 8, 16 ohm Speaker Jacks
– Custom Handcrafted
Turret Board
– Handwired
– Weight: ~35 lbs

Head Cabinet
Standard Tolex: Black Levant. See options below for other colors.
– Dimensions: 19″w x 8″h x 8.25″d
– Weight: 23 lbs

Also available in 1 X12 and 1 X 10 combos (or Jeff can custom build one to your liking)

Tone Bone Score: 5.0. When I can swing it, I’ll be getting this amp to complete the VRX Series!

Jeff Aragaki, founder and builder of Aracom Amps, always chuckles when I tell him that he’s onto something with his VRX (short for Vintage Rox) series amps. With the VRX22, he seemed to have stumbled onto a sweet spot that produced an amp that has an incredible and beautfully balanced tone that bring out the best tonal aspects of the 6V6 tube. He’s done it yet again with the updated RoxBox 18, now renamed the VRX18, but incorporating many of the same features he built into the VRX22.

I just purchased the VRX22, having fallen in love with the tone that it produces, and I’ve fallen love yet again, but now with the VRX18. I’m like a hopeless romantic that loves two women for their individual virtues, but in this case, the women don’t mind – they can co-exist with each other. Okay, bad analogy… 🙂

I originally reviewed the RoxBox 18 back in December. At the time, I totally dug its tone, but took marks off because of the mildly harsh breakup at lower volumes. There’s nothing harsh about the tone of this amp now – at any volume! It’s a great amp to play, and as expected, it’s pedal friendly, and responds really well to overdrive pedals. Also, I played four guitars through it, and it sounded incredible with all of them!

I won’t go into a lot of detail, since I already covered pretty much all the descriptive information I needed to in the original review, so I’m going to cover some important things I’ve learned about the VRX 18 and the VRX series in general. But first, as opposed to doing this last, here’s a short clip featuring the VRX18 to show you how kick-ass it sounds:

For this clip, I used a Strat with just the middle pickup, plugged directly into the VRX18. I just dig that EL84 grind! I had the Channel 2 volume dimed, and the master volume at halfway in full-power mode. It was very loud, much to the chagrin of my wife. 🙂 But I needed to capture at least some of that EL84 compression.

What’s cool about the EL84 is that it compresses nicely when pushed, but still seems to retain a certain openness in its overdrive. This is unlike something like a KT-66 that compresses so much when pushed you lose volume.

The Best Master Volume in the Business

I don’t say this lightly when I say Jeff has the best master volume in the business. I’ve played many amps. But when Jeff created the VRX22, he did something with the master volume that is pure magic. It has a nice, even volume sweep that seems to act independently of the channel volume. This means you can crank the channel volume to get some serious grind, but control the output via the master, and it won’t suck your tone! I’ve found this to be a real problem with other amps. That master volume is incorporated into the VRX18.

The Best Half-Power Switch in the Business

A lot of manufacturers use a pentode/triode switch to achieve half-power settings in their amps. I’ve played several amps with this feature. But in half power mode with the pentode/triode configuration, I’ve noticed a distinct tonal difference between the two modes in amps configured this way. It’s not that the tone is bad. In fact, many I’ve played around with sound great in half-power mode. But it’s like two different amps.

Jeff Aragaki takes a different approach and instead adjusts the B+ voltage to maintain the usage of all pins in the power tubes. I’m not an electrician, and can’t even begin to explain this technically, so I’ll just say it this way: When you switch to half-power mode in any Aracom Amp, the amp doesn’t change its tonal characteristics. It sounds and plays the same!

The Difference Between Old and New

In addition to the great master volume Jeff incorporated into the VRX18, the first thing I noticed was that it was nowhere near as easy to get this amp to overdrive in channel 2 as it was with the original RoxBox 18. This is not a negative thing at all because as I mentioned in my original review, the overdrive was pretty harsh at lower volume levels. I spoke to Jeff about this, and he said that based upon my original tests and review, he decided to mellow out the extra gain stage in the VRX18 so you could get a nice overdrive tone at any volume level.

You won’t get over-the-top gain with the VRX18. But for that, I have a simple fix-all: Get a great booster pedal like a Creation Audio Labs Mk.4.23 (again, the best booster on the planet), and SLAM the front-end of the amp. 🙂

But all that said, if you’re in a venue where you can dime both master and channel volumes, you will be rewarded with gorgeous harmonics and overtones and luscious feedback!

Overall Impressions

Like I said, this is my next amp… It just rocks the house! And at $895 for the head, you could get both the VRX22 and VRX18 for under the price of a single boutique amp! This isn’t a sales pitch. The value proposition of the VRX series is something that should be seriously considered. You’re not getting a production line amp that’s built overseas. With the VRX series of amps, you’re getting a US-made, handwired amp for under a grand!!!

Admittedly, I was a little skeptical when I first ran across Aracom Amps. But I’m now a believer, and a faithful customer!

Read Full Post »

Late last night, I was lurking (and posting) on my favorite gear forum The Gear Page, when I ran across this thread: Stacking ODs? where a player was asking if anyone had stacked any overdrives. I’ve been doing this for years with different pedal combinations, sometimes successfully, sometimes not. Through my experiments, I found that stacking works best on amps that have a much more open distortion character; that is, the power tubes don’t compress too much. For instance, I tried this on an Aracom Custom 45R that KT-66’s in it, and the compression was so intense that it sucked away all the tone. When Jeff swapped out the tubes with 6L6’s, it was a totally different story. However, I’ve gotten the best results with amps based on either 6V6’s or EL84’s. These tubes don’t compress the signal as much when they saturate as their bigger siblings and maintain a much more open distortion character.

To hear what stacked OD’s sound like, here’s a clip I took out of a song I’ve been working on. Here’s the signal path:

Strat -> Tube Screamer -> Holy Fire -> Mk.4.23 Booster -> Reason SM25

The TS overdrive is set at about 2pm, the Holy Fire’s overdrive is set a 12, with distortion just past 2pm, and the Mk.4.23 booster is dimed for an extra 24db of boost. 🙂  The SM25 is StackMode (both channels run in a series with an extra gain stage), with gain at about 12. Here’s what it sounds like:

This is the raw, unmastered track. It’s really aggressive, but as you can see, it’s not super-compressed.

Update

I’m probably going to buy a Catalinbread Dirty Little Secret in the next couple of days. This pedal was made for stacking, much like the Creation Audio Labs Holy Fire. It’ll be interesting to see what it’s like on my board.

Read Full Post »

Catalinbread Dirty Little SecretI always love being able to get great tone at a bargain. It’s not that I’m cheap. I’ll pay top-dollar for great gear, but when potentially great gear comes at an incredibly affordable price, the Dawg’s ears perk up, and his nose starts sniffing around to see where he can play some gear.

Such was the case when I first came across this little pedal company located in Portland, Oregon called Catalinbread. I had run across the name on a couple of gear forums, but didn’t get a chance to check out their site until today when I read their press release in Harmony Central Effects News. After I read the press release, I had to check out Catalinbread’s site, and much to my pleasure, Catalinbread offers several, very cool pedals.

One thing that makes them stand apart is their diminutive size. As noted in ProGuitarShop’s Catalinbread company page, “One of the defining features of Catalinbread effects pedals is the size. Catalinbread pedals are half the size of your standard MXR. That’s right, take a Phase 90 and cut it in half vertically and you’ve got the basic size of Catalinbread’s pint-sized pedals.” But, as they say, size isn’t everything. Apparently Catalinbread’s pedals pack a lot of sonic punch.

The other thing that makes Catalinbread pedals stand apart is their price. Their most expensive pedal that I found was US$179.95. Several of their pedals are under US$120.00! Mind you, these are handmade pedals! That’s so awesome! Catalinbread is definitely taking the stand of selling gear at lower prices to get it into players’ hands. Creation Audio Labs does this with their awesome pedals, and Aracom Amps does it with their VRX line. This ain’t trivial stuff, either. This is great, handmade gear at a great price!

Can you keep a secret?

The Dirty Little Secret could be construed as another “amp in a box” pedal. But from what I’ve heard from sound clips, it’s far from that. Catalinbread claims to have built into the box amp-like touch sensitivity that accurately respond to your playing dynamics and volume input; so much so that you feel like you’re playing in front of an amp, and not through a pedal. But there are several videos on the DLS product page that bears this out. Check out that page here.

Of course, only a live test will reveal if that is true, but I’m intrigued enough to go try one out if I can. The only problem with that is there are none to be found. This pedal’s so scarce that you can’t even order one on the Catalinbread’s web site! I have a feeling they’re being sucked up as fast as the company can produce them. Even retailers who were hawking the pedals awhile ago have either removed their sale pages or replaced their “buy now” link with ‘Email us about ordering.”

Well… my brother lives up in Portland. Maybe I’ll have him look these guys up!

Read Full Post »

I recently started a friendship with Vinni Smith at V-Picks – what a cool dude! Not only does he make great picks, but that man can make an axe sing! Anyway, I was e-mailing him this evening about how his “The Snake” pickup has changed my life, and it got me to thinking about specific pieces of gear that have had a drastic effect on how I approach the guitar. I’ll share them here in kind of a loose chronology:

1. The Kyser Capo

Yeah, lots of people call ’em “cheaters,” but screw ’em. I couldn’t play lots of songs without one. But the Kyser capo in particular really changed my approach, especially after I saw James Taylor playing with one. For years, I used a standard nylon strap type of capo that just basically stayed in place. But then I saw JT playing with a Kyser. I always wondered how he did his mid-song key changes. I used to think he just changed his hand position and played barre chords. But I’ll be damned if he didn’t just slide the capo up, then just played open chords in another key. That was it! I was sold.

2. Ovation Celebrity Deluxe

After my beloved “Betsy” (a Yamaha FG-335 acoustic) broke in a terrible fall, I immediately went in search of a new guitar. I played all sorts in this used gear store and came across this gorgeous sunset burst Ovation. I wasn’t much of an Ovation fan – thought they were really tinny sounding. But when I played this one, it had a much deeper sound than the Ovations I’d played up to that point, and it was a shallow body, no less. When I plugged it into an amp, it sounded even better! That guitar got me into amplified sound. So of course, in addition to buying the guitar, I also got a small Roland 25 Watt practice amp. What a life changer that was.

3. Fender Hot Rod Deluxe

This was my very first tube amp, and an amp that I still use because of how good it sounds… er… I’ve had some modifications done to it, but nevertheless, being my first tube amp, it exposed me to a whole new world of tonal possibilities. Up to that point, I’d played only solid state amps from a Roland JC-12o to a Line 6 Flextone III to a Roland Cube 60 (which I still have – it’s an awesome amp). The Hot Rod showed me the wonders and beauty of tube amp distortion which is nothing like what you get with solid state amps.

4. Ibanez Tube Screamer

There are overdrive boxes, and there are overdrive boxes. But the Tube Screamer is THE classic overdrive box, and the oldest pedal on my board. I’ve of course fallen in love with other OD’s like the Creation Audio Labs Holy Fire, but the Tube Screamer had a real huge effect on how I looked at tone and established what pleases me the most with respect to breakup. It’s a great pedal (though I’m really psyched about testing the Tone Freak Effects Abunai 2).

5. Blizzard Pearl Fender 60th Diamond Anniversary Stratocaster

I love that classic, vintage sound, and this guitar delivered it from the moment I played it. Yeah, it’s made in Mexico, it cost me less than $400 new, but I chose it over Strats five times its price. Why? Because it kicked the shit out of the other guitars. It was THE guitar that convinced me that it’s not the price you pay but the tone you produce that matters. Since I’ve gotten her, I play “Pearl” every day. She’s the first guitar I go to when working on a new song. What a wonderful instrument.

6. Saint Guitar Company “Baby Blue” Benchmark

This isn’t my guitar, and I no longer have it in my studio, but this was the very first guitar that was made to my personal specifications. There is nothing like playing a guitar that’s made to order. The experience is surreal, and started me down this path of playing a custom guitar. Adam’s going to be building me one in the next few months – I’m keeping that one. 🙂

7. Reason Amps SM25 Combo

Even though I love my Hot Rod, the SM25 marks a time when I’ve gotten super-serious about my tone. I’d played a bunch of amps, but this amp showed me that sometimes you do have to pay to get stellar tone – and it’s worth every penny. Lots of manufacturers have created amps that run their channels in series, but I haven’t come across one amp yet that does it as well as Obeid Kahn and Anthony Bonadio. They’ve come up with an amp, cab, and speaker combo that’s like nothing I’ve played before – and I’ve played some awesome amps.

8. Creation Audio Labs Mk.4.23 Clean Boost

I used to think clean boosts were just to help punch a solo through the mix. I didn’t know that they could be used to slam the pre-amps of a tube amp to produce super-overdrive in an amp that no distortion or overdrive pedal can give you. But this one’s very special in that it adds no tonal artifacts of its own – it’s uncanny. What it does is boost the natural sound of your guitar, and when slamming the front-end of amp, gives you the true overdriven tone of your amp. This is a piece of gear that I cannot do without any longer, and it now has a permanent place on my board.

9. Red Bear Picks

I never thought I’d buy a handmade pick, nor pay $20 for one no less. But Red Bear Trading TortisTM picks truly changed my life. I now use Red Bears exclusively for playing acoustic guitar. They sound great with electric as well – I’ll get to that below when I talk about V-Picks – but no pick I’ve ever played has made my Ovation sound so good. These picks look and feel like natural tortoise shell, but they’re made from a polymer of milk protein. No matter, they’re awesome picks!

10. Aracom Amps RoxBox 22 Watt (soon to be released)

This diminutive amp oozes 6V6 goodness. It’s still kind of in the prototype phase so I can’t really write too much about it, but I think my friend Jeff Aragaki has hit a real sweet spot with this amp. Get this: It’s hand-wired, though it uses a solid state rectifier, and it costs less than $1000! The profound thing about this is you can indeed get boutique caliber gear at a great price. But for me personally, this amp is the very first boutique amp I’m buying. Oh, I’ll eventually get the Reason SM25 to run in parallel with this one, 🙂 but this amp is special because it’s the first boutique amp I will ever have owned.

11. V-Picks “The Snake”

As I mentioned above, I’ve befriended Vinni Smith, and I just dig the dude! He knows so much about guitar, and we’ve shared a lot of the same experiences, and love the same kind of music (his favorite guitar solo is the lead break in the middel of Frampton’s Do You Feel Like We Do – my favorite as well). When we first met, Vinni sent me a large sample of his picks, which I compared head-to-head with my Red Bear picks. Of course, I love my Red Bear Classic B-style Heavy, but when I played the comparable V-Picks Standard on my electric guitars, I just couldn’t believe this sound and action I was getting! So I decided to use my Red Bears for acoustic – as I said, nothing sounds better than a Red Bear on acoustic. But for electric, it was going to be V-Picks all the way. Then during a conversation we were having a couple of weeks ago, Vinni told me he’d send me his Snake picks. These are a whopping 4.1 mm thick, with a different bevel than his others. Since I’ve gotten them, I’m never going to use anything on electric guitar than the Snake! I use the rounded for a smoother, fatter tone, and use the pointy for bright attack tones – especially when I’m doing stuff on the bridge pickup! These two picks have totally changed my approach to playing electric. Thick picks in general did that, but these are the thickest I’ve played, and they absolutely ROCK THE HOUSE!

12. May 30, 2010 – I know, a bit late on the uptake here with this one, but life-changing nonetheless, and that is my Aracom Power Rox PRX150-Pro attenuator. This is the first attenuator that I’ve used that truly stays transparent down to bedroom levels. It is the only attenuator that accurately gives me my cranked up tone at low volume levels, and it is absolutely wonderful! I know there are others out there, but knowing that they’re modeled after existing attenuator designs that I know don’t sound very good at low volume levels, it was a no-brainer for me to choose this one. As Doug Doppler said to me in a recent visit to his home, “This thing has saved my ears!” Even Joe Satriani uses one of these units and loves it! That’s how good it is!

Okay, that’s it for me… Anyone care to share what gear has changed their lives?

Read Full Post »

Tone Freak EffectsI love serendipitous moments, when I stumble upon something new when I’m doing something else entirely. Such was the case of me stumbling upon Tone Freak pedals. I was seeing if the domain name “tonefreak.com” was taken, and at the top of the search results was Tone Freak Effects. You know me and overdrive and distortion pedals. I LOVE ‘EM! And Tone Freak Effects specializes in two kinds of overdrive, two kinds of distortion pedals, plus a buffer/booster and a really nice trem pedal.

The OD and distortion pedal clips I listened to demonstrate a very diverse set of pedals that have a classic character, but also sound fairly unique as well. For instance the Abunai 2 clips sounded a lot like a classic Tube Screamer – nice and open – but with a bit more low-end while maintaining that openness. In fact, all the pedal clips I listened to portrayed familiar OD and distortion sounds, but were also wonderfully different in very good ways. This could likely be because almost all the pedals are the result of collaborations with various guitarists.

No matter, these pedals sound awesome!

I’m particularly interested in the Buff Puff, a signal buffer, plus a clean boost. The buffer is on all the time, and helps restore the signal loss that can occur in a long effects chain. When you switch the pedal on, you get some clean boost. Not sure how many dB, but that is something that I find totally cool. In addition to my love for OD pedals, I’ve really started getting into clean boost – not just to up my volume, but to also slam the front-end of an amp. It’s wonderful!

Anyway, check Tone Freak Effects out at: http://www.tonefreak.com!

Read Full Post »

« Newer Posts - Older Posts »