This is a continuation and expansion of the original new gear article I wrote previously…
Riddle me this…
So what do you get when you cross a veteran cabinet maker with an electrical engineering guru? Right. A new amp manufacturer. But the two guys I’m talking about, Anthony Bonadio and Obeid Kahn, didn’t just want to create another boutique amp outfit; they had to have a “reason” to create yet another amp manufacturing company; and after putting their heads together they did come up with a “reason.” It’s called Reason amps!
I recently had the privilege to speak with Anthony Bonadio at length about his new company, and I’m incredibly impressed with the vision behind Reason amps. As Anthony put it, their new amp had to be different: Not just a re-expression of existing designs, but something truly different; otherwise there wouldn’t be a reason to build one (get it?). And at first blush, it certainly appears that they’ve realized their desire to be different. But in order to be different, you have to know what you can do against the existing paradigms, and both Anthony’s and Obeid’s pedigrees as amp cab manufacturer and electrical engineer respectively have given them a certain industry perspective that have allowed them to produce an amp that does indeed push beyond the current paradigms.
So what’s so different about Reason amps? You might look at the amp and say, “This is just another flavor of a vintage-voiced two channel amp.” And if all you used were the Normal and Bright channels independently, you’d be mostly correct. In fact, both Obeid and Anthony are vintage gear freaks, and wanted to produce a vintage-voiced amp – but take it elsewhere… And it’s the third mode of operation that makes this amp really stand out. It’s something Obeid coined “StackMode.” Make no mistake, StackMode isn’t just adding a gain stage to an amp. It’s actually running the two amp channels in series.
“So what,” you might say, “That sounds like a bunch of marketing mumbo-jumbo. There are lots of multi-channel amps on the market.” Not like this. In almost all multi-channel amps, the signal handling for each channel is performed independently. Channel switching is pretty much an internal A/B box. Some amps will have independent EQ on each channel, though most have a “Master” EQ that controls the EQ for all the channels.
StackMode is different – and more importantly, it hasn’t been done before (at least not that I know of).
With StackMode engaged, the fully amplified signal from the first channel flows into the next channel in a series, so what you do to the input gain, EQ and output from the first channel directly affects the signal of the second stage; hence the term, “StackMode.” So in reality, this is not just a different take on an existing pattern. It’s taking an existing pattern and creating a completely new application out of it.
In light of this, I asked myself, why hasn’t this been done before? It seems so simple in concept. But in reality, it’s not easy at all because of the power management issues that arise from essentially re-amping a previously amplified signal that has already gone through a gain stage. With the Reason amps, it’s all about the engineering behind managing the voltage and current, and that’s where Obeid Kahn’s engineering genius has come into play.
So to re-answer the original question that I started the article with: What do you get when you cross a veteran cabinet maker with an electrical engineering guru? You get a new amp that completely breaks the mold of existing amp designs. To say I’m excited about this doesn’t even begin to scratch the surface of what I’m feeling.
The Amps
Reason amps come in two tonal flavors depending upon the power tubes you choose, either EL34- or EL84-based. From the EL34 side Reason offers the SM50 head, SM25 head, SM25 combo for 50 and 25 Watt ouput respectively. On the EL84 side, there are the SM40 head and SM20 combo, with 40 and 20 Watts of output respectively. And of course, they 4X12, 2X12, and 1X12 speaker cabs for the heads as well. No matter what amp you choose, all come with StackMode, so all you have to decide upon is your tonal and power requirements!
Amazingly enough, prices are “Reason-able” considering the engineering that has gone into the amps and compared to other boutique amp manufacturers. Here’s a quick list:
EL34
SM50 Head – $2295
SM25 Head – $2195
SM25 Combo – $2395
EL84
SM40 Head – $2195
SM20 Combo – $2295
Cabs
412 Cab – $995
212 Cab – $595
112 Cab – $395
So why are the prices for the different amps so close together? Simply because the circuitry is the same for each amp. The only significant difference between the amps is in the power handling for each amp, and according to Anthony, that doesn’t impact the production cost in any significant way.
Hybrid Construction
A lot of purists scoff at the idea that any PCB board is used in the construction of a vintage-style amp. But Reason actually uses a combination of turret boards and PCB boards to handle specific tasks for optimal performance. For instance, all signal handling (read: the tone producing stuff) is done with point-to-point wiring on turret boards, while all the switching is done on PCB boards to ensure fast response and reliability. All boards employed are high-grade, 1/8” thick, so even the PCB boards have ample traces to ensure great current flow. So the idea is to use the best and most appropriate components for a particular job. That’s just plain intelligent engineering.
Made by players for players
A lot of companies claim this, but with Obeid’s and Anthony’s collective experience as performing musicians, they really had the gigging and session guitarist in mind when building their amps. For instance, the amps are voiced bright by design, as brighter amps will be able to cut through a mix a lot easier. They also record a lot better. Case in point, even though I love my Fender Hot Rod Deluxe, I have to admit that it doesn’t record very well because of its naturally expansive output that makes it sound a bit muddy in a mix. It works great on stage, especially in the low volume venues I play. But in the studio, I tend to use smaller amps that have a real mid- to high-freq voicing because the guitars just sound so much better through them. But with a brightly voiced amp like a Reason, I wouldn’t have to rely so much on tiny, less “ballsy” amps.
One thing I do have to mention is that the volume knob on all Reason amps is a push-pull knob. When you pull it out, you get a high-freq EQ boost, to get more high-end freqs that’ll add extra sparkle and shimmer to your output. This is great for recording!
All that said, Anthony did stress that he didn’t want to alienate any players who didn’t happen to be gigging or session musicians; it’s just that those kinds of guitarists would definitely find an immediate advantage of using a Reason amp because of how it’s voiced.
My Take Overall
Yeah, yeah, I’m excited about yet another thing – if you read this blog with any regularity, when am I not? But really, it’s not too often that new gear totally blows me away. To me, the concept behind StackMode is a staggering achievement. As an engineer myself (though in software), I have a genuine appreciation for new and innovative solutions to different problems, and StackMode is something that really tickles the geek in me. Granted, I’ve only heard sound bites, but I’m soon going to be demoing the SM25 in the near future, and I just know I won’t be disappointed!
Check out the whole story at the Reason Amps web site. It’s awesome.
Read Full Post »
Guitar Gear 