Feeds:
Posts
Comments

Archive for the ‘guitar’ Category

Pedal Board - Lee Rittenauer

Just read a great article on setting up your pedal board on Guitar Jam Daily. It has great information on planning out your board size and layout – something I wish I had done before I got my board, which is now too small for all my pedals, especially since I’ve gotten a wah pedal! Eek! In any case, check it out!

But the article also raised a question that I get from time to time: In what order should I place my pedals? There is a general model that most people follow, and instead of re-inventing the wheel, I’ll point you to another great article on Harmony Central that covers this very topic.

Photo courtesy of andybrauer.com

Read Full Post »

Way Huge Fat Sandwich Harmonic Saturator

Okay, okay already. Another overdrive pedal. Just when you think you’ve seen ’em all, another pops up. But harken back to the early 90’s, and you’ll find Way Huge pedals gracing the boards of many guitar gods. Way Huge closed their doors in 1999, but a recent partnership with Dunlop has revived Way Huge, and the Fat Sandwich is one of the products of the partnership.

This is one special-sounding pedal. Check out the clips here.

Read Full Post »

Creation Audio Labs Mk.4.23 Boost

Creation Audio Labs Mk.4.23 Boost

As many know who read this blog regularly, I’m a bit of an overdrive/distortion pedal nut. Just love the things. Silicon, germanium, doesn’t matter. I’ve always dug the tones boxes like the Fulltone OCD and Ibanez TS-808 produce. But then again, I never had good enough tube amps whose natural distortion didn’t require some bolstering.

Then I discovered Reason Amps, and did a review of the Reason SM25, which the guys at Reason graciously sent me to evaluate and to show to some local dealers. For the first time in my playing career, I’ve been playing an amp that has a knock-your-socks-off natural distortion. It’s so pleasing that I just don’t need overdrive or distortion pedals to get that saturated sound. It’s in the amp!

But the one thing that I found that I missed when playing with the amp at a couple of recent gigs was the volume boost I’d set up in my drive pedals to play a lead. It wasn’t that big a deal; I just set up the base volume of the amp a little louder than normal, then use the volume knob on my guitar. And for most situations that has worked out well. But when the band gets really loud, I need some extra oomph, and that’s when I started thinking that a booster pedal would really help.

And wouldn’t you know it, by pure coincidence, Anthony Bonadio at Reason called me last week and asked me if I had tried out the Creation Audio Labs Mk.4.23 Boost pedal. He claimed that it was best boost pedal he’d every played through, and that it was completely transparent. It takes your guitar’s signal and just makes more of it; totally transparent. Then told me he’d send his own out to try with the SM25. Then I got really interested. Check out the video demonstration below:

Flat EQ response, and a single volume knob? What could be easier?

I know there are lots of booster pedals out there. But from my research, it seems that most add some coloration of their own, or have an extra “drive” knob to add overdrive. From my perspective, a booster should just well, boost; that is, take what you have and just give you more of it. And from what Anthony has said, and from the reviews I’ve read, this seems like it does just that.

If this is enough for you to take a bit, you can only get the pedal at Creation Audio Labs directly. But don’t dispair! This pedal is only $149.00!!! Can you believe it?!!! Creation Audio Labs want to reach as many people as possible, so they eliminated the middle man and sell their pedals direct. So what used to be $250+ pedal is over a hundred bucks cheaper!

I think those pedals are definitely worth a look for price alone! Creation Audio Labs has been known as a great boutique pedal maker, and to have them get into the range of more affordable pedals is absolutely awesome! Check ’em out!

Read Full Post »

Reason Amps SM25 25 Watt Combo Amp

Reason Amps SM25 25 Watt Combo Amp

Reason SM25 25 Watt Combo Amp

Summary: Incredibly expressive and versatile amp that can deliver a wide range of tones from glassy, sparkly cleans, to lewd, rude, and crude distortion, all in a single cabinet!

Pros: Killer tones in all channels. Amp is voiced bright by design, which makes it great to use in the studio. StackModeTM is the best thing since sliced bread, and is THE secret sauce that makes Reason Amps stand out from the rest.

Cons: No effects loop, which would be handy for placing reverb and other modulation effects after the amplified signal. Just a nit.

Price: $2395

Specs:
• Output: 25 watts RMS @ 5% THD
• 1 X 12 Eminence Red Coat Driver
• (2) 6V6 output tubes, in Class AB Fixed Biased configuration
• (4) 12ax7 preamp tubes
• GZ34 Rectifier tube
• 3 way Stack switch – Normal, Stack, Bright
• Normal channel – Volume, Treble, Middle, Bass
• Bright channel – Volume, Tone
• StackMode™ – Bright & Normal channel controls are active, Stack Volume & Hi-Cut
• Oversized extra capacity power supply
• Power Switch
• Standby Switch
• Independent output jacks for 4,8, 16-Ohm operation
• Footswitch access to all three channels/modes

When I discovered the Reason Amplifier company a few weeks ago, I was so intrigued by what they had to offer that I immediately contacted them. I had the fortune of getting in touch with Anthony Bonadio, one of the founders of Reason to talk to him about his exciting new company and his new line of amps. That conversation led to him sending me an SM25 25 Watt combo to review; and since I’ve had it, I haven’t gotten much sleep from playing with it late into the night. Now you might say that I’m just excited about playing a new amp. Yes, that certainly has a lot to do with it. But what Reason has come up with in their amplifiers is so incredibly brilliant and unique that I’ve been spending all my free time trying to discover the subtle intricacies of this tone machine. There’s a lot to talk about, so let’s get started!

“Dahr-ling, you look mahvelous!”

The Reason founders, Anthony Bonadio and Obeid Kahn, are both vintage gear freak-o-maniacs, and the retro styling of the entire Reason amp line is a testament to that passion. The SM25 sports a black tolex cabinet with light brown trim around the grille cloth, and a thick leather handle with what appears to be brass accoutrements. Between the control surface and grill cloth is a prominent tolex-covered cross board sporting the Reason logo which, by the way, is very cool, very retro as well. The control board looks like burnished brass with black, bold lettering for labels. And to add to that retro vibe, chicken head knobs are used for all the controls. This amp, and all Reason amps for that matter, just ooze vintage mojo. Just looking at the amp, I can’t help but grin that grin you get when you see something so far-out COOL!

It’a hard to discern the actual size of the amp from just a picture. So make no mistake about its size: This is not a diminutive 25 Watt amp. In fact, it’s about as big as a Fender Twin, though not as deep. The shipping weight said 32 pounds, but from feel and comparison to my Fender Hot Rod, it weighs almost as much. But that’s not a bad thing. A beefy cabinet creates a lot of resonance if done correctly, and believe me, it’s done correctly with this amp.

How It Sounds

All Reason amps, including the SM25 are voiced bright. You don’t get beefy lows out of this, and that’s by design. Now before you dismiss that, on stage and in the studio, that bright voicing will ensure your guitar cuts through the mix. I recently played it at one of my regular gigs, and where my amp oftentimes gets lost in the mix, forcing me to pump up my volume, I had no problem cutting through, and mind you, I barely had to push my volume. The bright voicing let my guitar tone sit in the mids and highs. My sound guy even commented on how well he could hear my guitar without me pushing the volume like I usually do during a solo break; though admittedly, like any lead guitarist, I usually don’t mind being louder than everyone else. 🙂

In the studio, using the amp for recording is like being in heaven. The bright voicing combined with the rich tones the amp produces is simply candy for the ears. From a practical perspective, brightly voiced amps also record much better. For home recording I’ve had to stop using my big amp because it’s just too boomy, no matter how I set the EQ. I’ve had to use smaller, brighter amps because they cut through a mix much better. But since I’ve had the SM25, I’ve recorded two songs with it, and like I said, I’m in heaven. I now have a bright voice to cut through the mix, but rich tones as well. It’s the best of both worlds!

The SM25 is also incredibly touch-sensitive and responsive to the subtlest manipulations I made on my guitar. In fact, when I first started playing with it, I was a bit embarrassed by how I sounded. For my all my tests, I played along to some jam tracks I’ve produced for practicing different styles, and recorded what I played through the amp. When I played back what I had recorded, I was appalled at how crappy I sounded! All my mistakes came through! I couldn’t hide whatever bad habits or bad technique I had behind effects, like I normally would. In short, this amp has forced me to play better because it’s so unforgiving when you make a mistake. But hey! It’s never a bad thing to be shown your weaknesses. That’s how you grow and improve!

Multiple channels, lots of tone shaping possibilities…

The SM25 comes with two channels: Normal and Bright. But it also sports a third “channel” called StackModeTM that’s essentially the Normal and Bright channels run in a series with an extra gain stage, while retaining volume and tonal control over the Normal and Bright channels. To me, StackMode is Reason’s secret sauce, but I’ll get into that in a bit. I’ll first describe the independent channels.

The Normal channel sports a volume knob and a three-band EQ. The volume knob is also a push-pull knob, and pulling it out adds some extra high-freq boost to bring out the super high frequencies. The effect is that once you set up your EQ, pulling out the knob adds some extra high-freq shimmer and sparkle. It’s subtle, but absolutely delicious. Comparatively speaking, the Normal channel sounds like your classic, jangly American clean tone, but with the high-freq boost, you get a bit of the sharpness of the British clean – nice.

The Bright channel is well, bright. It too has a push-pull volume knob for extra high-freq boost, and it has a single tone knob to back off some of the brightness. The Bright channel is also the more “ballsy” of the two, and really kicks in some pretty high gain. It’s quite lovely, in my opinion, and it’s perfect for doing the traditional solo break that will cut right through a mix with ease.

Channels? We don’t need no stickin’ channels!

But for me, the real attraction of this amp, and actually any amp from Reason for that matter, is StackModeTM. In all my years of playing, I’ve never come across anything quite like it. On the surface, you might think this is just another channel on a multichannel amp. It is in a way, because of its independent gain stage. But that’s about as close a comparison that you can make to other multichannel amps. Unlike other multichannel amps where all the channels are independent, StackModeTM input doesn’t come directly from the guitar. The guitar’s signal is routed through the Normal and Bright channels first, then fed into the StackMode channel. And the volume and EQ settings on the Normal and Bright channels are still active!

Because volume and EQ are retained in the Normal and Bright channels in StackModeTM, the tone shaping possiblities are incredible. What you adjust in Normal or Bright affects the final output. You can crank up the volumes on the first two channels and achieve uber gain, with thick, rich distortion. Or you can dial it back a bit and take a more balanced approach. The point is that you can do a lot of tone shaping to your needs while in StackModeTM. And here’s the kicker: The amp still retains its touch and guitar volume sensitivity in StackModeTM.

What does this mean? Well, I soon discovered that StackModeTM was the only channel I’d probably ever use, unless I had to go super clean, whereas I’d just switch to the Normal channel. The amp in StackModeTM is so responsive to picking attack and volume knob levels that I found I just didn’t need to do any channel switching at all once I dialed in my settings for the Normal and Bright channels. It’s that good!

One other thing, the volume knob on the StackModeTM channel is a very good Master volume. When I’m playing late at night, I can turn the volume down on the StackModeTM channel, and still retain the characteristics of the settings I made in the first two channels. It’s just softer. How cool is that? So that’s why entitled this section, “Channels? We don’t need no stinkin’ channels.” Once you have your settings dialed into StackModeTM, you’ll never want to get out of it! So for me, the SM25 is effectively a single channel amp with adjustable stages.

My Tests

In any case, for my tests, I used four different guitars: A Strat, a PRS SE Soapbar II with P-90’s, an Epiphone Korina Explorer and a Saint Guitars Benchmark, both with humbuckers. I’ll talk about how each guitar sounds separately below.

Fender Strat

Obeid Kahn is known in the industry as a “Strat man,” and this amp really sounds great with a Strat. I’ve got the vintage re-issue Tex Mex pickups in mine, and slathering on reverb, you can get some awesome Dick Dale-like tones. But it doesn’t necessarily sound like a Fender amp. In fact, the clean tone is like a cross between a Fender and a Marshall. It’s creamy smooth, but bright and sparkly at the same time. The big cabinet adds to the resonance, and the ever so slight voltage sag that you get from the rectifier adds to the sustain and resonance. This is boon when you’re playing with a Strat because they do not sustain well at all. I could get country twang to hard-driving distortion with uber sustain with my Strat.

PRS SE Soapbar II

P-90’s are hot pickups by nature, and it doesn’t take much to push any amp into overdrive, and when it does this, it’s a preamp overdrive lover’s wet dream! With the SM25, the 12AX7’s just sing with sweet, smooth overdrive goodness. There’s nothing harsh about the sound this produces in the SM25, but one thing I did notice with the tone was that unlike other amps I’ve played with my SE Soapbar II, even though the amp is bright, the sound the amp produces with it is big and bold, without being boomy. It’s crystal clear, and doesn’t wash out the higher notes in a barre chord, which often happens with more boomy amps. All in all, I just dug that halfway between single coils and humbucker sound my P-90’s produced with the SM25.

Epiphone Korina Explorer

This is a real rock guitar, with a warm ballsy tone. Plugged into the SM25, I was amazed at how the amp responded to this guitar, and I was able to spew out some thick distortion and singing sustain with the volume knobs on the amp dimed to the hilt. I’m not a metal player, and technically, with the bright voicing of the Reason amps one wouldn’t think they’d be suitable for metal, but the lewd, rude, and crude drive I could produce with the Explorer plugged into the SM25 was scary! But in a good way. And when I scooped the EQ, yikes!

Saint Guitars Benchmark

Of all the guitars I used for testing the SM25, the amp seemed to love the Benchmark the most. This guitar was spec’d with Blues and Classic Rock in mind, and through the SM25, I’ve never heard it sing like this. I could go from deep, dreamy clean to rabid dog distortion, and the whole time, the SM25 maintained a tonal clarity and character; never muddying or washing out. It was other-worldly, to say the least.

Made for the Road and the Studio

Anthony Bonadio cautioned me during a previous conversation that he didn’t want to alienate people from buying the amps when he said, “Our amps are really intended for the gigging and session musician.” In other words, Reason amps aren’t really meant for the bedroom musician. These amps want to move air, and that’s no exception with the SM25. In fact, when cranked, it’s a hell of a lot louder than my 40 Watt Fender Hot Rod Deluxe, and that’s a loud amp! It just wants to project its voice. Premier Guitar even gave its bigger brother, the SM50, its “Loud as Hell” award. But in my opinion, the real test of an amp is how good it sounds throughout its entire range of volume. That’s a mark of versatility, and in spite of what Anthony claims is the focus of Reason’s line of amps, you actually can play these amps at bedroom levels and still produce kick-ass tone!

A lot of amps don’t sound good unless they’re cranked, but at lower volumes they just peter out and lose their character. But at least with my experience with the SM25, it sounds great at ANY volume. Considering that all Reason amps are built around the exact same circuitry, I can safely say that this probably applies to the entire line. So don’t be fooled by the “loud as hell” moniker. These amps are incredibly versatile amps that are comfortable be played in lots of different venues under a variety of conditions.

My Overall Take

I think you can guess that I just love the SM25. For a musician like me who plays small to medium venues, and whose studio is located in a carpeted garage, this amp is a dream come true. It’s expressive with all my guitars, and it’s so versatile that I can use it wherever I play.

As I shared with Anthony recently, StackModeTM is it for me. It’s the secret sauce that sets Reason amplifiers apart from the competition! For more information, go to the Reason Amps web site. And if your local dealer has some in stock, I encourage you to go there and play around with one. You will not be disappointed; in fact, you’ll be blown away!

Read Full Post »

teachwombat-banner

One of GuitarGear.org’s readers recently plugged his guitar instructional site, Teach Wombat, in one of my articles about moving into a new chapter of my guitar life. I normally don’t like random product plugs, but being a teacher, I’m always looking for teaching aids and resources, so I checked out the site, and it definitely showed promise. A little later after Ken left his comment, like a good businessman, he offered to let me review his material, so I did, and all I have to say is, “WOW!” This stuff is GREAT! Ken’s primary product, the Guitar Teacher’s Toolkit includes over 100 professionally produced handouts covering the C-A-G-E-D system and scalar modes, plus a bunch of other awesome diagrams.

As a new guitar teacher, producing my own handouts has been a very laborious and tedious task, but with the Guitar Teacher’s Toolkit, I’ve got pretty much everything I need for teaching. It even comes with blank neck diagrams for ad hoc instruction!

But I wouldn’t limit this just to teachers. Players of all levels and skill will find lots of value from the diagrams and can use them as quick references. Hey! For $12.00, you can’t miss! So do yourself a big favor and go to TeachWombat.com today and buy Ken’s Guitar Teacher’s Toolkit!

Read Full Post »

Eric Crapton EngrishEnglish: Play Guitar

Earlier today, a friend of mine sent me one of the funniest Engrish things I’ve ever seen: http://www.rahoi.com/2006/03/may-i-take-your-order/

This inspired me to see if I could find good Engrish stuff about guitars. There aren’t many, but I did find this one:

http://engrishfunny.com/?s=guitar

I remember getting a kick out of some of the manuals I used to read on gear I’d get. Manufacturers are a lot better now about their manuals, but sometimes you get some real doozies like one I found.

Read Full Post »

The problem with evalutating pedals online is that you can’t really audition them very easily – especially in combination with other pedals. But BOSS has gotten us one step closer with the new BOSS VPB-2 or Virtual Pedal Board. It’s very cool in concept. You go to the VPB site, select a style of music and a combination of pedals appears on the page. A loop in the style you’ve chosen begins playing, and you can then activate/and de-activate pedals to see how they change the recorded signal just by clicking on them. You can also swap some of the pedals out for the current style.

Check it out here: BOSS Virtual Pedal Board 2

Read Full Post »

MXR '76 Vintage Dyna Comp Pedal

MXR

Over a year ago when I was looking for a compression pedal, one of the pedals I reviewed was the MXR Dyna Comp, along with the Boss CS-3. I didn’t like either of them. The CS-3 was way too squishy and I thought it significantly altered my tone. The MXR wasn’t quite as bad, but I still thought it did enough tone alteration to pass on it.

As many might know, I ended up going with the Maxon CP9 Pro+, which I felt didn’t alter my tone, no matter how far I squeezed the signal. I love the pedal, and when I play my Strat, it’s almost always on.

But in my search for a compressor back then, I ran across several discussions on the classic Dyna Comp from the 70’s. People raved about its transparency, and how it was a highly sought-after pedal. In fact, a search on eBay revealed that I couldn’t get a vintage one for under $250. Yikes! For a pedal that brand new goes for under $80, the vintage Dyna Comp must’ve been really special.

Well, the folks at the MXR Custom Shop have produced a limited run of the classic Dyna Comp replete with the script lettering, and more importantly, the EXACT same circuitry as the original. According to the article I read, the IC’s used in the original pedal haven’t been produced since the 80’s. But the Custom Shop folks seemed to have found some – at least enough to produce a limited run.

I looked on the Dunlop site for any information about the new pedal, and there was none to be found. No prices either. Count on this baby to hit collectable status real quick. Also count on it being priced a hell of a lot more than its newer sibling, which you can get at Musician’s Friend for $69.99. Now given that I already have a kickass compression pedal, I’m probably won’t be in the market for one, but I sure would love to get my hands on one just to review it.

For those of you who are a bit dubious of using a compression/sustainer, please don’t scoff. I will admit that for high-volume, high-gain situations, a compression sustainer is not really needed. You’ll get a lot of compression from your saturated power tubes. But for those of us who mostly play in low-volume applications, a compression/sustainer is a total life saver.

The restaurants and church that I play at have high ceilings, and of course, there’s the ambient crowd noise to deal with – especially at the restaurants. To help cut through the crowd noise, and to deal with the expansive acoustic environment without turning up too loud, I couldn’t do without a compression pedal. This is especially true when I kick in distortion, which tends to “spread” out your sound a bit. With a compression pedal, you fatten up your tone and produce a more even volume, albeit a tad less dynamic.

You might think that the loss volume dynamics is a bad thing, but before I got my CP-9, I had to fight my volume all the time – it was frustrating.

Apparently, the newer M-102 version with serial numbers starting with ABxxx are true bypass, and sound really nice. Maybe the one I tried at the time was not one of ’em. Oh well… In any case, if you’re interested, you can check it out at Musician’s Friend:

MXR M-102 Dyna Comp Compressor Pedal


You can also check out the Maxon CP-9 Pro+ here:
Maxon Nine Series Compressor Pro+ Pedal

Read Full Post »

Reason Amplifiers

This is a continuation and expansion of the original new gear article I wrote previously

Riddle me this…

So what do you get when you cross a veteran cabinet maker with an electrical engineering guru? Right. A new amp manufacturer. But the two guys I’m talking about, Anthony Bonadio and Obeid Kahn, didn’t just want to create another boutique amp outfit; they had to have a “reason” to create yet another amp manufacturing company; and after putting their heads together they did come up with a “reason.” It’s called Reason amps!

I recently had the privilege to speak with Anthony Bonadio at length about his new company, and I’m incredibly impressed with the vision behind Reason amps. As Anthony put it, their new amp had to be different: Not just a re-expression of existing designs, but something truly different; otherwise there wouldn’t be a reason to build one (get it?). And at first blush, it certainly appears that they’ve realized their desire to be different. But in order to be different, you have to know what you can do against the existing paradigms, and both Anthony’s and Obeid’s pedigrees as amp cab manufacturer and electrical engineer respectively have given them a certain industry perspective that have allowed them to produce an amp that does indeed push beyond the current paradigms.

So what’s so different about Reason amps? You might look at the amp and say, “This is just another flavor of a vintage-voiced two channel amp.” And if all you used were the Normal and Bright channels independently, you’d be mostly correct. In fact, both Obeid and Anthony are vintage gear freaks, and wanted to produce a vintage-voiced amp – but take it elsewhere… And it’s the third mode of operation that makes this amp really stand out. It’s something Obeid coined “StackMode.” Make no mistake, StackMode isn’t just adding a gain stage to an amp. It’s actually running the two amp channels in series.

“So what,” you might say, “That sounds like a bunch of marketing mumbo-jumbo. There are lots of multi-channel amps on the market.” Not like this. In almost all multi-channel amps, the signal handling for each channel is performed independently. Channel switching is pretty much an internal A/B box. Some amps will have independent EQ on each channel, though most have a “Master” EQ that controls the EQ for all the channels.

StackMode is different – and more importantly, it hasn’t been done before (at least not that I know of).

With StackMode engaged, the fully amplified signal from the first channel flows into the next channel in a series, so what you do to the input gain, EQ and output from the first channel directly affects the signal of the second stage; hence the term, “StackMode.” So in reality, this is not just a different take on an existing pattern. It’s taking an existing pattern and creating a completely new application out of it.

In light of this, I asked myself, why hasn’t this been done before? It seems so simple in concept. But in reality, it’s not easy at all because of the power management issues that arise from essentially re-amping a previously amplified signal that has already gone through a gain stage. With the Reason amps, it’s all about the engineering behind managing the voltage and current, and that’s where Obeid Kahn’s engineering genius has come into play.

So to re-answer the original question that I started the article with: What do you get when you cross a veteran cabinet maker with an electrical engineering guru? You get a new amp that completely breaks the mold of existing amp designs. To say I’m excited about this doesn’t even begin to scratch the surface of what I’m feeling.

The Amps

Reason amps come in two tonal flavors depending upon the power tubes you choose, either EL34- or EL84-based. From the EL34 side Reason offers the SM50 head, SM25 head, SM25 combo for 50 and 25 Watt ouput respectively. On the EL84 side, there are the SM40 head and SM20 combo, with 40 and 20 Watts of output respectively. And of course, they 4X12, 2X12, and 1X12 speaker cabs for the heads as well. No matter what amp you choose, all come with StackMode, so all you have to decide upon is your tonal and power requirements!

Amazingly enough, prices are “Reason-able” considering the engineering that has gone into the amps and compared to other boutique amp manufacturers. Here’s a quick list:

EL34

SM50 Head – $2295
SM25 Head – $2195
SM25 Combo – $2395

EL84

SM40 Head – $2195
SM20 Combo – $2295

Cabs

412 Cab – $995
212 Cab – $595
112 Cab – $395

So why are the prices for the different amps so close together? Simply because the circuitry is the same for each amp. The only significant difference between the amps is in the power handling for each amp, and according to Anthony, that doesn’t impact the production cost in any significant way.

Hybrid Construction

A lot of purists scoff at the idea that any PCB board is used in the construction of a vintage-style amp. But Reason actually uses a combination of turret boards and PCB boards to handle specific tasks for optimal performance. For instance, all signal handling (read: the tone producing stuff) is done with point-to-point wiring on turret boards, while all the switching is done on PCB boards to ensure fast response and reliability. All boards employed are high-grade, 1/8” thick, so even the PCB boards have ample traces to ensure great current flow. So the idea is to use the best and most appropriate components for a particular job. That’s just plain intelligent engineering.

Made by players for players

A lot of companies claim this, but with Obeid’s and Anthony’s collective experience as performing musicians, they really had the gigging and session guitarist in mind when building their amps. For instance, the amps are voiced bright by design, as brighter amps will be able to cut through a mix a lot easier. They also record a lot better. Case in point, even though I love my Fender Hot Rod Deluxe, I have to admit that it doesn’t record very well because of its naturally expansive output that makes it sound a bit muddy in a mix. It works great on stage, especially in the low volume venues I play. But in the studio, I tend to use smaller amps that have a real mid- to high-freq voicing because the guitars just sound so much better through them. But with a brightly voiced amp like a Reason, I wouldn’t have to rely so much on tiny, less “ballsy” amps.

One thing I do have to mention is that the volume knob on all Reason amps is a push-pull knob. When you pull it out, you get a high-freq EQ boost, to get more high-end freqs that’ll add extra sparkle and shimmer to your output. This is great for recording!

All that said, Anthony did stress that he didn’t want to alienate any players who didn’t happen to be gigging or session musicians; it’s just that those kinds of guitarists would definitely find an immediate advantage of using a Reason amp because of how it’s voiced.

My Take Overall

Yeah, yeah, I’m excited about yet another thing – if you read this blog with any regularity, when am I not? But really, it’s not too often that new gear totally blows me away. To me, the concept behind StackMode is a staggering achievement. As an engineer myself (though in software), I have a genuine appreciation for new and innovative solutions to different problems, and StackMode is something that really tickles the geek in me. Granted, I’ve only heard sound bites, but I’m soon going to be demoing the SM25 in the near future, and I just know I won’t be disappointed!

Check out the whole story at the Reason Amps web site. It’s awesome.

Read Full Post »

Reason SM25 Combo Amp

Reason SM25 Combo Amp

Need a tube amp? Now you have a Reason. Sorry, couldn’t resist the pun. All right, I know what you’re thinking, “Another amp manufacturer?” That’s what I thought at first until I saw some video clips (I’ll get to those in a sec). But on the flip side of that mild complaint, thank the universe that people have the creativity to come up with different approaches to existing paradigms.

I found out about Reason amps from none other than Mr. Phil Vickman of Fat Tone Guitars just outside of Chicago, Illinois. Being a fellow blog freak, I found Phil’s Fat Tone Blog awhile ago, and signed up for his newsletter. Much to my surprise, his latest newsletter featured an upcoming in-store demo from the guys at Reason Amps on November 12 at 5-7pm. Go to Fat Tone Guitars for address information, or give ’em a call at: 866/512-8663.

So, being curious, I checked out the Reason Amps web site, checked out their sound bites, and much to my surprise, they didn’t have a dealer list, and they didn’t even list MSRP’s for their amps! So, I gave Phil a call, and we had a nice chat. Apparently, Reason Amps is NEW. So new, that not too many people have heard of them. But I have a feeling that their amps are soon going to get some traction.

So what makes Reason amplifiers so special?

Whether you go low wattage or up to their 50W amps, they all come with three modes: Normal, Bright, and Stack. It’s actually two channels, with the third mode being a blend of the two channels that Reason calls “Stackmode.” Stackmode uses a “cascade series connection that sets up the circuit architecture to blend the independent gain stages” of the two channels.

The net result? Yikes! Tones that you wouldn’t expect to find from an amp that is essentially a vintage-style amp. But don’t take my word for it. Check out the YouTube demo:

You can also view all their videos here by clicking here.

Granted, YouTube audio is not the most desirable audio to be heard, but if the amps sound that good over YouTube, you gotta believe they’re going to sound outstanding live. So check out the Reason web site!

A Little Plug for Fat Tone Guitars

Phil Vickman has a nice little business going with Fat Tone Guitars. I go to the Fat Tone site to get on my drool factor for the wonderful gear he sells. Amazingly enough, there’s not a Fender guitar listed on his site, though he does carry Gibson. But make no mistake, Fat Tone sells high-end gear from several boutique guitar makers like Baker, St. Blues, and Ram. From my recent conversation with Phil, he likes unique approaches to guitars. For instance, Ram guitars make Tele-style guitars made from pine! Wow! We spoke at length about Saint Guitars and how Adam Hernandez likes using different kinds of woods like walnut or bloodwood. That’s cool and unique. Adam told me he spoke to Phil, and will be sending him a couple of demo guitars. That’s so awesome! Way to go Adam, and way to go Phil! You won’t be disappointed!

Read Full Post »

« Newer Posts - Older Posts »