I love serendipitous moments, when I stumble upon something new when I’m doing something else entirely. Such was the case of me stumbling upon Tone Freak pedals. I was seeing if the domain name “tonefreak.com” was taken, and at the top of the search results was Tone Freak Effects. You know me and overdrive and distortion pedals. I LOVE ‘EM! And Tone Freak Effects specializes in two kinds of overdrive, two kinds of distortion pedals, plus a buffer/booster and a really nice trem pedal.
The OD and distortion pedal clips I listened to demonstrate a very diverse set of pedals that have a classic character, but also sound fairly unique as well. For instance the Abunai 2 clips sounded a lot like a classic Tube Screamer – nice and open – but with a bit more low-end while maintaining that openness. In fact, all the pedal clips I listened to portrayed familiar OD and distortion sounds, but were also wonderfully different in very good ways. This could likely be because almost all the pedals are the result of collaborations with various guitarists.
No matter, these pedals sound awesome!
I’m particularly interested in the Buff Puff, a signal buffer, plus a clean boost. The buffer is on all the time, and helps restore the signal loss that can occur in a long effects chain. When you switch the pedal on, you get some clean boost. Not sure how many dB, but that is something that I find totally cool. In addition to my love for OD pedals, I’ve really started getting into clean boost – not just to up my volume, but to also slam the front-end of an amp. It’s wonderful!
Introduced at Winter NAMM, the Lava Cable CPS (Configurable Pedal Board System) is what Lava Cable claims is the first fully configurable pedalboard system ever. They may be right, and are certainly on to something. The CPS consists of individual, notched pedal “blocks” that fit flush together. You then screw the pieces together in whatever fashion you wish. Imagine growing or shrinking your board at will! For pedal junkies like me, this system could be a bit dangerous. The limited size of my current board makes getting more pedals prohibitive, and that’s a good thing. A system like this would allow me to expand it ad infinitum!
In all seriousness though, being able to flexibly lay out your board is a totally cool concept to me. You’re not reliant on the shape of the board nor, if you’re into doing it yourself, must you cut out your own templates. For more info, go to: http://www.lavacable.com/lavacps.html
You ever pick up a guitar and just can’t seem to put it down? For the past few years, that has been “Pearl” my Blizzard Pearl Strat. I just love the way she sings, and she sings oh so sweetly. But ever since I got “Goldie,” a Saint Guitars Goldtop Benchmark to test out, I just can’t seem to put her down. It’s tough because ever since she arrived, I’ve been splitting my time between the two… Wish I had the problem with women when I was single. 🙂 <sigh> Oh well…
“Goldie” is a very special guitar, with a mahogany body, maple top, and solid rosewood neck. I know, I’ve already reviewed her, but she’s absolutely the perfect guitar – at least to me. The tone from the woods are so balanced and warm that when you play her, you have to just close your eyes and let her take you for a ride. And her neck… ah, her neck! What a thing of grace and beauty. The open-pore finish of the rosewood is so wonderful to the touch, you just want to run your hands up and down the fretboard and feel the sensuousness of her gentle curves. I know, I’m sounding kind of weird, but it’s the best I can come up with to draw a metaphor of how it feels to play this guitar!
Tonight, after I returned home from a quiet date for a cup of tea with the love of my life for Valentine’s Day, I retired to my studio to play around with Goldie. I was just noodling when I played a phrase that just begged to be laid down. So I figured out the chord progression that would go with the phrase, and here’s what I came up with:
Goldie has a bright, big voice, and true to all Saint guitars that I’ve had the priviledge to play, she has an even, dynamic range in all strings, up and down the fretboard. Unlike other guitars where you pluck the top two strings, and you get a loss in volume, forcing you to dig in when you play those strings, especially about the 12th fret, not so with any Saint guitar – it’s uncanny, and a mark of the care Adam Hernandez has put into his designs to ensure his guitars are resonant in any frequency!
Having a great amp to bring out the best in a guitar doesn’t hurt either. The amp I used is a soon-to-be-released prototype Aracom Amp, based upon the RoxBox 18 Watt, but with different tubes, and slightly different power handling. Sorry, I can’t be more descriptive at Jeff Aragaki’s request. You can be assured that once Jeff gives me the go-ahead, I’ll be writing a review of it, and it will be good. 🙂 This amp in particular is very pedal friendly, and I used a Tube Screamer to give me some grit on the lead, plus my new Hardwire Reverb.
In any case, I just wanted to share my excitement about this guitar. It simpy kicks ass, and paired with a dynamite amp, I’ve got a winning combination on my hands!!!
When my son Bennie was tested and diagnosed with a form of Attention Deficit Disorder – the attention kind, not the hyperactivity kind – I realized that I had grown up with the same problem. Parents and teachers used to just call it “getting easily distracted.” I’d be doing something then someone or something would distract me, and I’d point my attention on the new thing. It was difficult, but I was able to compensate for it, and my attention deficit hasn’t really affected me too much. In fact, it has probably helped because my over-active mind switches gears – a lot – probably a huge reason I keep this blog up to date with new stuff at least five or six times a week. I’ll be doing some coding, then I’ll take a break to sniff around the web for new gear, and voila! A new article appears on the site! 🙂
Such was the case with this new Jam Track. I got the inspiration for a new song this morning, and laid down the main riff to a metronome. While experimenting with different rhythm parts, I ran across a really funky bassline, and it turned out to be perfect. Then I added some funky drums, layered on a walking double-stop run, pulled out the Goldtop and started to JAM!!! So here it is. You have about 6 and a half minutes to play! As with all my Jam Tracks, it’s best to loop the song so you can play ad infinitum.
Gear Used
Aracom 22 Watt Prototype with 6V6’s – freakin’ awesome amp! (Sorry, can’t say any more at this time.)
Recognize the cabinet? It looks an aweful lot like a Reason Amps cabinet, doesn’t it? That’s because the one of the founders of Reason Amp, Anthony Bonadio, also owns a cabinet making company called Stage Craft Gear, a not very widely known cabinet maker – at least among consumers. They’ve actually made their start as an OEM cabinet supplier for a lot of amp companies through their parent company, Rhyme Musical Enclosures LLC. But as an OEM, they don’t get their logo on the cabs, and believe me, there are some heavy hitters who use their stuff.
In any case, they’re launching a brand new site at http://www.stagecraftgear.com – very soon – like today or the next! I’ve seen the look of the new site, and it totally kicks the shit out of the old one! Their designers did a great job!
Get a Free Cabinet!!!
I don’t have all the details around this, but Anthony did tell me about a cabinet giveaway that they’re having. You’ll have to go to the site and sign up. I only saw some sub-pages when I went to the site that have the new look, and the home page hadn’t been updated yet – I imagine the giveaway ad will be there.
Okay, let’s get down to business…
Yeah, it’s great that Stage Craft Gear has a new site, and even better that they’re giving one away (I hope I’m the lucky winner 🙂 ), but that’s just airy-fairy stuff, in my opinion. What’s really important about Stage Craft Gear is the fact that they make the cabs for Reason Amps. It’s amazing how you read a lot about amps, but IMO, there’s just not enough attention paid to the cabinet. It’s the resonance chamber for the speaker, for chrissake! And it can make or break an amps’s sound!
My personal experience with the SM25 112 Combo is that it’s sound is “open.” It’s not a tight-sounding amp at all, which is a really good thing when you’re on stage, and a lot of that has to do with the cabinet. It’s tall, and not very deep, but it projects a gorgeous, bright tone that really complements the big sound that comes out of the standard Eminence Governor that’s installed in the cab. The Governor works AWESOME in that cabinet. On the other hand, I used a Governor in a deeper, heftier cabinet (made by another manufacturer), and it sounded like shit! Way too tight, and high-mid to high-freq tones were really subdued.
The point to this is that my experience with a single Stage Craft cabinet leads me to believe that these guys make very special cabinets. It’s no surprise that several boutique amp manufacturers use them. They kick ass!
Ensuing Cab Review
I’m going to be reviewing a cabinet from Stage Craft really soon. Check back here. If my previous experience is any indicator, this cab promises to be very special. Stay tuned!
I don’t know about you, but as a songwriter, it bugs me when I go for long periods without writing songs; or more precisely to the point, when the inspiration to write doesn’t come to me. I’m not a calculating songwriter, and completely rely on that inner voice that inexplicably sends music to my head. For the past couple of months, I haven’t had the inspiration. Oh, I’ve written short clips of stuff, and I’ve had the beginnings of song ideas; in fact, I just counted last night, and in the last couple of months have recorded 25 song ideas. With some of these, I even recorded several instrument tracks. But none of these developed into full songs.
But over the weekend, I got a new guitar from Adam Hernandez of Saint Guitars (read the review here). This functional piece of artwork stirred something in my soul and I got the inspiration to write a song – it’s about time! The song is based upon Psalm 146; yeah, it’s religious, but hey, a song is a song in my book. Besides, I haven’t written a religious song in awhile, and it’s actually where I started, so nothing like going back to my roots. But more importantly, just getting that one song out has made my creative juices start flowing again, and that’s a good thing. Give it a listen:
Being naturally introspective, I took a look at how I got the inspiration. Sure, the trigger was probably that gorgeous guitar, but more importantly, it had the effect of changing my current perspective. And I think that’s the key to inspiration. When you’re feeling in a rut, do something else or try out some other gear. The idea is to derail the status quo.
Summary: I never ceased to be amazed at the guitars Adam Hernandez builds. Here is yet another incredible tone machine but with classic looks and even better sounds.
Pros: This guitar oozes both visual and tonal bliss. The rosewood neck, mahogany body, and maple top combine to create thick but bright resonance that just stirs the inspiration juices.
Tone Bone Rating: 5.0 – There is literally nothing not to like on this guitar. It truly rocks the house!
Like a lot of folks, I love vintage and vintage-style gear. There’s a certain, je ne sais quoi, perhaps mojo (I know, it’s an overused term) about vintage gear that seems to harken back to the “good ol’ days” when things were handmade and sturdy. But when that style is expressed in a modern way, at least for me, something stirs in my soul, and I’m totally inspired. It has been this way with every Saint guitar I’ve had the priviledge to play, and that continues with the Goldtop Benchmark.
The Goldtop's Bridge
When I did my first Saint Guitars review of the Faded Blue Jeans model, I couldn’t believe how perfect the guitar was. The walnut body and neck, combined with the quilted maple top produced a bright and resonant tone that just begged to be explored to eek out all the possible tonal variations. With the Goldtop, the experience is still the same, but with that absolutely gorgeous finish, I’m experiencing a bliss that’s coming from both visual and aural sources.
Fit and Finish
The Goldtop's Body and Neck
I’ve come to realize that there are some things in life that you can’t avoid describing with the heavy use of grandiose phrases, and the Goldtop definitely falls within this category with respect to how it looks. It’s perfect in every way. The creamy gold finish that almost looks white under light is a wonder to behold, but that’s just part of the equation. The gloss-finished mahogany body and open-pore rosewood neck add a certain sensuousness to the look of the guitar. I love that Adam had the foresight to keep the rosewood in as natural and organic state as possible. It feels absolutely wonderful when you grip the neck.
If I were to come up with a metaphor for how this guitar looks, it’s like admiring a beautiful woman that’s nicely dressed, but doesn’t need any makeup or other adornments to enhance her beauty. She’s self-aware and confident in how she looks, but doesn’t come across as aloof or unapproachable. In other words, this is a woman that has a purely natural and organic magnetism, and someone to whom I’d want to be close. That’s the response I have to this guitar.
Playability
I love the feel of natural grain, which is probably why I love my Strat so much with its maple neck. Again, for me there’s a certain sensousness in feeling the wood’s grain in my hand, and the Goldtop doesn’t disappoint in this department. When I first held the guitar, I was surprised and a little worried about the neck profile, which is wide by design, but add to that the C-shape, and I didn’t know if my relatively short fingers could reach all the frets, especially in the upper registers to hit the 6th string. But to my very pleasant surprise, I could get to those notes with ease.
As with all Saint’s that I’ve played, the Goldtop has a fast neck. The frets are just how I like them: Not too deep, but really lending themselves to a nice vibrato when you dig in a bit. And moving up and down the fretboard is a pure joy. The fret spacing is just right. As a guitar player himself, Adam really took great pains to get this part of the guitar right. For me, as I’ve said in the past, I’m not a really great improv guy, but I do play chords up and down the fretboard, and being able to move and nail the chords is very important. It’s as if precision was built into this guitar!
Adding to the playability is the arrangement of the neck and body. It’s very Les Paul-like, and that’s a good thing, which means that the higher frets are very easy to reach when the guitar hangs naturally from the straps. With my Strat, to get to the high frets, I have to physically shift the guitar to the left a couple of inches. Of course, part of that has to do with my gut 🙂 and it’s not really a problem, but I don’t have to shift the Goldtop at all.
How It Sounds
This is one of the best pickup combinations I’ve ever heard. The Pearly Gates in the neck has a nice, sweet, and smooth vintage tone. I liken it to a sip of a 25 year old Scotch. It’s warm and sweet and totally comforting. The Custom 5 is bright, but with a nice, taut low-end. When you turn up the gain on this pickup, you get the expected bright bridge tone, but because of the solid bottom-end, there is absolutely no “tinniness.” It’s just brighter sounding. This is a trait I’ve become accostomed to with all Saint Guitars. They’re the only guitars I’ve ever played that at least to me, have a usable bridge pickup. Combine the two in the middle switch position, and it’s pure heavenly tone. I could keep the guitar in this setting for practically everything I play, unless I wanted to get a super-smooth tone (neck), or need a bright tone to cut through the mix for a lead (bridge).
To me, the mark of a truly great guitar is balance in the dynamic response; more pointedly, that when you play high notes, the guitars volume doesn’t suddenly dive down. I don’t know how many guitars I’ve played that when I get above the 12th fret, the first three strings’ volumes literally sink, forcing you to really dig in with your pick to make them sound louder. That makes for a much more difficult playing approach, and is one thing that bugs me about my PRS SE II Soapbar. With that guitar, the first three strings are quite a bit lower in volume than string four through six. I’ve learned to compensate with my volume knob which thankfully is in a good position for on-the-fly tweaking. But with the Goldtop, and all the Saint’s I’ve played, this is not a problem. The dynamic response is balanced through all strings. It’s a testament to the resonance of the guitar. It picks up all the frequencies!
One thing I’ve learned about testing guitars is that the really important tonal properties are exposed when you play the guitar clean. I’ve played a lot of guitars that sound great when they distort, but just sound weak and hollow when you play them clean. Remember the beautiful woman I described above? This is her speaking voice: It’s rich and sensuous, and something you can listen to and never tire of it. Here’s a clip to prove the point:
I used an Aracom Amps Custom 45R that was re-tubed with 6L6’s from the stock KT-66 tubes, and Jeff kindly installed a Jensen Alnico speaker, replacing the Governor that I was testing with it. Both served to really open up the tone quite a bit with much more midrange – it started out very low-end focused.
What was amazing about this clip was that I wrote it earlier in the day, then recorded it 15 minutes before I had to leave to take my son to his lacrosse game, and just saved the audio file. When I finally sat down to listen to it, I couldn’t believe what I was hearing. Mind you, the clip is not EQ’d or mastered in any way. That’s the natural sound of the guitar out of the Custom 45R. I added just a touch of reverb on the amp, but other than that, it’s just the guitar, and the tone is – at least to me – amazing! It almost gives off a chorus effect. I thought it was due to the reverb at first, but when I came home, I played the song without any effects, and that chorusy tone was still there! I was blown away!
Overall Impressions
I didn’t think you could improve upon perfection, but the Goldtop is now my standard of perfection. As I wrote in a previous article, I’ve been in a bit of rut with writing music as of late, but with the Goldtop, I’m getting inspired again. It’s a marvelous guitar!
Ran across these demos on YouTube, and thought I’d share them here. This first one is from VOX at the NAMM show, and sound quality stinks, but the dude’s explanation of the differences between the two different voices (British or American):
This next clip comes from someone apparently in Japan, where the pedal was recently released. The sound quality is much better, and he inserted little conversation bubbles to show his settings. Picture quality isn’t that great but the quality of the sound makes up for it. Plus, it’s kind of amazing that this dude has such clever and articulate feet that he can make all the adjustments with his toes! HA! He’s not bad at guitar either! Check it out!
Especially after viewing the second clip (despite Mr. Clever Toes), this is definitely my next pedal – at least until after I try it out for myself. 🙂
Summary: With seven (7) licensed Lexicon reverb models, this is one bad-ass reverb pedal, and a great value proposition given the relatively inexpensive price of $149.99 for a true bypass pedal. With the Hardwire series, Digitech has really hit a home run!
Pros: Just about the best-sounding spring and plate reverbs I’ve ever heard in a digital reverb. Capable of subtle reverb, to thick, rich and wet surf.
Cons: None. I dig this pedal!
Price: $149.99 street
Features (from Digitech):
Reverb Types
Room – Fast decaying reverb; great for a touch of ambience
Plate – Renowned studio reverb heard on classic recordings
Reverse – Reverb in reverse; gradually crescendos to full volume
Modulated – Lush, modulating, reverb ideal for chords
Gated – Unique reverb with abrupt decay; good for percussive playing
Hall – Large, encompassing reverb with warm decay
Spring – Classic “surf” reverb; great for Rockabilly too!
Tails On/Off Switch – When on, reverb tails are not cut off in bypass
True Bypass circuitry preserves your tone in bypass
Constant high-voltage operation for tonal quality and noise reduction
HardWire Pedals include the following stage accessories
Stomplock™ knob guards lock your tone in place and prevent tampering or accidental knob adjustments onstage
Green gaffer tape helps you locate the pedal in adverse stage lighting
Custom-cut Velcro® pads attach and lock your pedals to your pedalboard
Tone Bone Rating: 5.0 – I did a review of this awhile back, but I finally bought one, and I am oh so pleased with how it sounds!
Yeah, yeah, say what you will about Digitech being known for “consumer” grade pedals, and I’m as much of a boutique pedal snob as the next guy, but there’s no denying the quality workmanship that has gone into the Digitech Hardwire series of pedals. And yes, I know, I reviewed this pedal before, but that review was based upon a test at my local Guitar Center, while competing against the flailing of a wanker sitting next to me, trying to look cool and and trying to play metal licks and failing horribly. Okay, enough of the ranting… Y’all know how I feel about wankers… (search GG for “wankers”).
And say what you will about a digital effect box, but the fact the RV-7 has seven licensed Lexicon reverb voices inside give this pedal LOTS of credibility in my book. As I mentioned in my previous review, I’ve used a Lexicon rackmount for vocals at my Church, and have absolutely loved the reverb effects it contains. Though digital, Lexicon has figured it out, so it’s no surprise that they’re pretty much the standard for digital reverb.
In any case, despite the conditions I had to play within during my initial test, the RV-7 blew me away. Honestly, at the time, I didn’t think Digitech was capable of making a truly great-sounding pedal. Make no mistake, I’ve had Digitech pedals in the past, and they’re all quite functional, but I would never give them a “best in class” rating. They tend to offer great value for the money you pay – which isn’t much for their standard stuff; at least until I discovered the Hardwire series – especially the RV-7!
Since I reviewed the RV-7, I’ve tried several, and even came close to buying an EH Holy Grail. It too is a great sounding reverb, but there was something about its room reverb model which just didn’t do it for me. It’s a great pedal though, but I still liked the RV-7 better.
Recently, I had the chance to go to the local music shop near my work (B Street Music in San Mateo, CA) to perform an A/B test between the Holy Grail and the RV-7. Head-to-head the pedals were pretty close in performance, but the RV-7 beat the Holy Grail with the types of reverb voices it offered, plus the room reverb model on the RV-7 was superb! While the Holy Grail just edged out the RV-7 with the spring reverb, I found I could dial in a great sounding spring reverb with the RV-7 just the same, so that, combined with the awesome room reverb was what sold me. But let’s get into some specifics…
Fit and Finish
All the Hardwire pedals are solidly built with a cool, flat metallic finish. These pedals are very well-built, and surprisingly heavy – definitely gig-worthy. The RV-7 has a purplish, flat metallic finish on the body with a flat silver switch plate that has a nice rubber pad with the Hardwire logo. The pedal featurs a cool, light-blue LED indicator light. The RV-7 has four control knobs: Level, Liveliness, Delay, and a Voice selector knob. The first three knobs are not smooth sweep knobs. They have – for lack of a better term – micro-notches that really add to the whole industrial vibe that the Hardwire pedals have going on. When you look at the pedal, what’s not to like? 🙂 Of course, how it sounds is where it’s at, isn’t it?
Controls
Level – Controls the Wet/Dry amount. Fully clockwise is 100% wet.
Liveliness – This is actually hi-cut filter to add or reduce the amount of high-end freqs that come through
Delay – Controls how long the reverb effect decays after striking a note or chord
Voice Selector – pretty self-explanatory
How It Sounds
In a word, AWESOME! I used it in my weekly acoustic gig this evening, and was thanking the heavens for such a great pedal. My guitar maintained its clarity, no matter how much I upped the level knob. It must have a slight pre-delay built in; whatever, the fact that I could clearly hear the notes and chords I was playing and not having them washed out by the effect was truly an inspiring experience. Add to the fact that it is true bypass, so when it’s off, it’s really off, is yet another reason to love this pedal; no hum, no buzz.
To be fair, I have no idea what to do with the reverse reverb other than to add some interesting effect with single notes in a song. But other than that, I’m really digging this pedal!
Sound Samples
Here are some sound samples I quickly created… Please excuse the recording quality. I just recorded in an open room with no filtering. BTW, I used a Strat with a prototype Aracom RoxBox 18 Watt Amp with a Jensen 1 X10 speaker. In almost every case, all the dials were at 12 o’clock, except for the Hall and Spring, where I set Level and Decay to about 2pm. I prefer a more subtle reverb effect, but as you’ll hear, the RV-7 is crystal clear, and produces a very nice reverb effect.
…but there’s a light at the end of the tunnel… At least I hope so. 🙂
For the past few weeks, I’ve been in kind of a rut with writing music. I’ve got eight songs for my new record, which I recorded pretty regularly over the course of about three months. And it wasn’t just eight songs I wrote. I wrote and recorded about 20 other songs before deciding on the ones that made the final cut. The process was incredible! A song would come to me, I’d grab my guitar or sit at the piano, and in a relatively short amount of time, I’d have a song. Then I’d spark up my DAW, and record a raw piece to make sure I captured it. No sweat.
But as soon as Christmas season hit, it seems that the stress of getting stuff done at work before taking a vacaction, then Christmas itself just sucked the creative juices out of me. Okay, I’ve written some jam tracks and recorded some short snippets of songs, but to date, I really haven’t gotten the inspiration to write a full song. But in spite of that, I’m feeling really positive as there is a bright side to this lack of creative energy.
As you know, I’ve lately been driven to be more academic about what I’m playing; partly because I want to be able to effectively teach what I’m learning, but also because I just want to be a better player. So in lieu of writing music, I’ve been working on my improv skills, and I’ve been really happy with the progress I’ve been making! All this practice is just making me a better player, and that is inspiring in and of itself!
For instance, as many may know, one of my regular gigs is to play at church. Before any naysayers start ripping me about playing at church, understand this: Do a worship service of ANY kind poses particular challenges. For instance, you can’t just rock out all your songs or pick music that is always up-tempo. Worship services need to take people through an emotion journey with respect to the music. Typically, the beginning and the ending songs are pretty upbeat, while the middle songs are much more subdued or, if you do have a more upbeat song, you don’t go all out and rock. The idea is that the music is not the focus, the worship experience is, and the music you play needs to enhance that. Furthermore, because it’s in a church, you can’t play at real loud volumes the entire time. As I mentioned above, you can get away with it at the beginning and the end, but even in those spots, you can’t really play at club or concert levels.
Sounds a bit constraining, doesn’t it? I’ve been gigging for years, and each type of venue poses its own particular limitations. The trick is to work around those limitations so that you can be as expressive as you can be.
All that said, considering the constraints, last night’s service was awesome! To add to our normal volume constraints though, I was missing both a drummer and a bassist, and all we had were two other guitarists besides me, one of which just started playing with us that day. So it was particularly challenging because being the most experienced guitarist put holding down the rhythm to the songs on me. But that was the cool thing. All the work I’ve been doing on my technique has allowed me to so much more than just strumming chords, adding little runs or double adorning some chords with arpeggios or arpeggiated double-stops. This is stuff that I couldn’t do six months ago! And despite not really being able to do any leads, it didn’t matter, I felt totally inspired!
So yes, there is a bright side to this rut. At least I can still play… 🙂
I love serendipitous moments, when I stumble upon something new when I’m doing something else entirely. Such was the case of me stumbling upon Tone Freak pedals. I was seeing if the domain name “tonefreak.com” was taken, and at the top of the search results was Tone Freak Effects. You know me and overdrive and distortion pedals. I LOVE ‘EM! And Tone Freak Effects specializes in two kinds of overdrive, two kinds of distortion pedals, plus a buffer/booster and a really nice trem pedal.
Guitar Gear 