Feeds:
Posts
Comments

Posts Tagged ‘gear reviews’

Gear Review: Barber Direct Drive

Posted in buying gear, distortion, effect pedals, Effects, GAS, gear, gear reviews, guitar, guitar effects, guitar gear, guitar pedals, guitarists, Guitars, Music, musicians, pedals, tagged , , , , , , , , , , , , , , on May 10, 2009| 3 Comments »

4.75 Tone Bones - Almost perfect but not quite

Barber Direct Drive

Barber Direct Drive

 Barber Direct Drive

Summary: The Direct Drive is a nice, fairly transparent overdrive that maintains your amp’s tone that can produce mild grit to over-the-top, searing gain that sustains for days. 

 

Pros: As overdrive pedals go, this pedal sounds great, and with internal trim pots you can adjust the bass response and presence. This ain’t a Tube Screamer clone by any stretch of the imagination. Plus, it’s handmade and at a GREAT price!

Cons: A little noisy with single coils and P-90’s.

Price: $119 direct

Specs:

Volume, Tone and Drive knobs
Internal Trim Pots to adjust bass response and presence 

Tone Bone Score: 4.75 – I really like this pedal! It’s fairly transparent and clear, and except for a bit of noise with my Strat and PRS SE II Soapbar, this OD delivers great tones at any volume!

If you read this blog with any regularity, you know I have a thing for overdrive pedals; especially in a small home studio like my own, a good overdrive pedal really helps get that drive tone when you have to play at bedroom levels. Unfortunately, not all drive pedals behave well at low volumes. I would have to say that a lot of my overdrive purchasing decisions have been driven (excuse the pun) by how well they perform in low volume situations like a home studio. I’ve played several drive pedals over the years, and while almost all sound great when an amp is pushing some serious air, there’s only a select few that perform well at much lower volumes. So I’m happy to say that the Barber Direct Drive falls into the latter camp!

Ease of Use

What could be more easy? Three knobs for Volume, Tone and Gain. Just dial in the amount you desire of each, and you’re off to the races. But the Direct Drive also provides a cool push-pull pot with the Tone knob that engages what Barber calls “Fat Harmonics” mode for what they call the “Expensive California” amp tone. It’s another way of getting more high-end sparkle and emphasis on overtones and harmonics; much like the Fulltone OCD that has it on all the time. But wait! There’s more! 🙂 Inside the box are internal trim pots for adjusting bass response and 

How It Sounds

It’s certainly fatter sounding than a Tube Screamer, even though Barber claims in their manual that a certain knob setting is an “808 killer.” I tried the Direct Drive at that setting, and it’s close, but sorry, no cigar. But that’s not a bad thing! The Direct Drive has a very distinct personality and definitely a sound and voice all its own! I did mention in the Summary that it’s fairly transparent. It is, but nowhere near as transparent as the Creation Audio Labs Holy Fire which is just about the most transparent overdrive I’ve ever played! But again, that’s not a bad thing. The overdrive characteristics are a bit tighter than a Fulltone OCD and much more even EQ-wise than a Tube Screamer; like I said, it has its own voice.

Here’s a clip I recorded. The rhythm part features a Strat. The Direct Drive’s volume is at unity, tone is dead-center, and Drive is about 10 am to get just a tiny bit of overdrive. The solo employs my Prestige Heritage Elite. The box’s volume is still at unity, tone is about 1 pm, and the drive is set to dead-center. This produces a nice, smooth grind, and lots of sustain.

By the way, the cool thing about that clip is that it was recorded at bedroom level, with my ribbon mic about 2 inches from the grille cloth! For the pedal to create that drive sound at that level is amazing!

Overall Impressions

This is a real kick-ass pedal, and I do have to say that in low-volume situations, this has got to be one of the best sounding drive pedals I’ve played. I dig it!  This is not a pedal I’d just at high gain, gig volume situations. It’s not that the tone is bad, but even though Barber has removed some of the compression characteristics in the later models (the old ones were pretty thick in comparison, apparently), it’s a bit too tight at high gain, especially when you need to punch through a mix. Besides at that volume level, I tend to stay away from my overdrive pedals altogether and just use my Creation Audio Labs Mk.4.23 booster (the best, most transparent booster on the planet, IMO) to slam my pre-amp tubes. 

But for general overdrive duties, this is a great pedal. I actually love its fatter tone when playing in low-volume venues, and for a street price of $119, and being hand-wired to boot, this is a pedal that I don’t think I can ignore! Neither should you! 🙂

Read Full Post »

Aracom VRX22 and Aracom 1 X 12 Mini Cab

Posted in amplifiers, amps, Amps/Amplification, aracom amps, buying gear, GAS, gear, gear reviews, guitar, guitar gear, guitar reviews, guitarists, Guitars, Music, musicians, new gear, VRX22, tagged , , , , , , , , , , , , , , , , , , , , , , on May 9, 2009| Leave a Comment »

 

Aracom Amps VRX22 - First in the series

Aracom Amps VRX22 and Aracom 1 X 12 Mini-cab

I know, I know… I’ve been singing the praises of this amp and cab for the last couple of months since I got them. But folks, what Jeff Aragaki of Aracom Amps has put together in the VRX22 is simply magic. I just can’t say enough about how much I love this amp. It doesn’t matter what guitar I plug into it, the VRX22 delivers the goods.

A New Option for the VRX22

I have the standard production model, the first in the series. In its stock mode, I wouldn’t change a thing. But I know there are some vintage gear and tube amp buffs out there that would frown upon the fact that the VRX series in stock configuration has a solid state rectifier. For me, it makes not a bit of difference; I just love the tone.

But for those that require a tube rectifier, Jeff also offers an option of a GZ34 or 5AR4 tube rectifier in place of the solid state rectifier. An A/B test didn’t reveal a tonal difference, but for the purists out there (and by no means do I mean this derisively), this is certainly an option, and a reason why you should consider this amp in your amp evaluations. And here’s another consideration: All Aracom Amps are hand-wired, and cost FAR LESS than equivalent amps. For instance, the VRX line in stock configuration costs $895! That’s unheard of in the boutique market!

Have a Cab, Will Travel

But on top of all that, the 1 X 12 mini-cab that Jeff custom built for me is simply magical as well. Jeff went against the common wisdom of not using a cube shape and porting and such, and built a simple cube shape with a width that exactly matches the width of the amp (about 19″ wide). Amazingly, this cabinet is incredibly resonant. The reason for this is that instead of using 3/4″ board, Jeff opted with 1/2″ board. This resonates a lot more with the speaker, and provides a bass response that adds depth to the output. Granted, I also have an absolutely kick-ass Jensen P12N Alnico speaker, but that cabinet even sounds good with just about any speaker you put in it. Like I said, amazing.

To further demonstrate the versatility of the VRX22 and the Aracom 1 X 12 mini-cab, I recorded a short blues clip using three different guitars, all running straight into the VRX22 with no effects. There are to overlapping rhythm parts panned left and right, and a solo in the middle. For the left pan, I used my gorgeous Prestige Heritage Elite (“Sugar”) plugged into the VRX22. For the right pan, I used my Strat (“Pearl”) plugged into my Fender Champ 600 and ran the speaker out into the 1 X 12 (I didn’t think the Champ could sound this good wow!). For the lead, I used “Sharkie,” my PRS SE II Soapbar with P-90’s in the bridge position straight into the VRX22.

Sorry for the slight mistake in the solo; or as my buddy Phil calls it, a “clam.” But overall, I was just amazed how good Sharkie sounded on that clip. I added a touch of reverb to that track, but made no modifications to the guitar signal at all. It was the guitar plugged straight into the amp.

As I’ve said in the past, I’m not affiliated at all with Aracom. I’m just a faithful customer, and just can’t sing the praises enough for the job Jeff has done!

For more information, visit the Aracom Amps web site!

Read Full Post »

Are you a Collector or a Trader?

Posted in buying gear, GAS, gear, guitar, guitar gear, guitar lifestyle, guitarists, Guitars, Music, musicians, tagged , , , , , , , , , on April 30, 2009| Leave a Comment »

collection

This is a bit of a continuation of my previous article about not getting fooled by pedigree. While I was singing the praises of a Saint Guitar Goldtop Benchmark that I was testing, my buddy commented to me, “You sure about wanting to get one of these? It’s gorgeous, and it plays and sounds amazing, but the problem I have with most boutique guitars is I’m not sure how well they retain their value. What if I wanted to sell it later on? Would I get what I paid for it? Will it appreciate in value?”

All valid concerns, but I simply replied that it’s all about your perspective: Are you a collector or a trader?

If you’re a collector, chances are you obtain gear to keep it and use it for a lifetime, or even just hang it on a wall (I know of someone who has 300+ guitars, most of which he never plays). I consider myself a collector. And from that standpoint, I’m what’s called “brand blind.” All I care about is if the gear looks good, plays good, and sounds good, no matter what the brand.

On the other hand, there are those whom I call “traders.” They get gear, but are always open to trading for another type of gear that might be better from their point of view. From that standpoint, brand awareness is important as people will tend gravitate toward known entities, and the brand-names definitely attract more traffic.

Mind you, I’m not saying one is better than the other. It’s just a matter of perspective in making a purchasing decision. I used to be pretty brand-centric, but ever since I started writing this blog, I’ve come across some awesome gear that I don’t think I would’ve even considered evaluating had I focused on the brand-name stuff.

And let me say that it’s not that you’re either one or the other. It also depends on the gear. For instance, I swear by V-Picks and Red Bear Picks. I won’t use any others. But I’ll buy off-brand pedals and guitars and amps.

So are you a “collector” or a “trader?”

Read Full Post »

Gear Review: Aracom Amps VRX18 Head

Posted in amplifiers, amps, aracom amps, buying gear, EL84, GAS, gear, guitar, guitar gear, guitar reviews, guitarists, Guitars, Music, musicians, overdrive, VRX18, tagged , , , , , , , , , , , , , , , , , , on April 18, 2009| Leave a Comment »

5 Tone Bones - Gear has stellar performance, value, and quality. This is definitely top of the class, best of breed, and it's a no-brainer to add this to your gear lineup!

Aracom Amps VRX18 18 Watt Head

Aracom Amps VRX18 18 Watt Head

 Aracom Amps VRX18 Watt Head

Summary: Based on the original “RoxBox” (no longer available), the VRX18 sports an improved master volume inherited from the VRX22, and a reworked, smoother overdrive profile.

Pros: As dynamic and expressive as its 22 Watt sibling, the VRX22, but oozing that bright, chimey EL84 goodness. When driven, produces a nice, tight overdrive.

Cons: None.

Price: $895 direct

Specs:

– (2) EL84 Power Tubes
– (2) 12AX7 & (1) 12AT7 Preamp Tubes
– S.S. Rectifier with “sag” circuit
– Hi/Low B+ voltage switch (18/9 watts)
– On/Off Switch
– Indicator Lamp
– Custom Heavy Duty Aluminum Chassis
– Custom Wound Transformers
– 4, 8, 16 ohm Speaker Jacks
– Custom Handcrafted
Turret Board
– Handwired
– Weight: ~35 lbs

Head Cabinet
Standard Tolex: Black Levant. See options below for other colors.
– Dimensions: 19″w x 8″h x 8.25″d
– Weight: 23 lbs

Also available in 1 X12 and 1 X 10 combos (or Jeff can custom build one to your liking)

Tone Bone Score: 5.0. When I can swing it, I’ll be getting this amp to complete the VRX Series!

Jeff Aragaki, founder and builder of Aracom Amps, always chuckles when I tell him that he’s onto something with his VRX (short for Vintage Rox) series amps. With the VRX22, he seemed to have stumbled onto a sweet spot that produced an amp that has an incredible and beautfully balanced tone that bring out the best tonal aspects of the 6V6 tube. He’s done it yet again with the updated RoxBox 18, now renamed the VRX18, but incorporating many of the same features he built into the VRX22.

I just purchased the VRX22, having fallen in love with the tone that it produces, and I’ve fallen love yet again, but now with the VRX18. I’m like a hopeless romantic that loves two women for their individual virtues, but in this case, the women don’t mind – they can co-exist with each other. Okay, bad analogy… 🙂

I originally reviewed the RoxBox 18 back in December. At the time, I totally dug its tone, but took marks off because of the mildly harsh breakup at lower volumes. There’s nothing harsh about the tone of this amp now – at any volume! It’s a great amp to play, and as expected, it’s pedal friendly, and responds really well to overdrive pedals. Also, I played four guitars through it, and it sounded incredible with all of them!

I won’t go into a lot of detail, since I already covered pretty much all the descriptive information I needed to in the original review, so I’m going to cover some important things I’ve learned about the VRX 18 and the VRX series in general. But first, as opposed to doing this last, here’s a short clip featuring the VRX18 to show you how kick-ass it sounds:

For this clip, I used a Strat with just the middle pickup, plugged directly into the VRX18. I just dig that EL84 grind! I had the Channel 2 volume dimed, and the master volume at halfway in full-power mode. It was very loud, much to the chagrin of my wife. 🙂 But I needed to capture at least some of that EL84 compression.

What’s cool about the EL84 is that it compresses nicely when pushed, but still seems to retain a certain openness in its overdrive. This is unlike something like a KT-66 that compresses so much when pushed you lose volume.

The Best Master Volume in the Business

I don’t say this lightly when I say Jeff has the best master volume in the business. I’ve played many amps. But when Jeff created the VRX22, he did something with the master volume that is pure magic. It has a nice, even volume sweep that seems to act independently of the channel volume. This means you can crank the channel volume to get some serious grind, but control the output via the master, and it won’t suck your tone! I’ve found this to be a real problem with other amps. That master volume is incorporated into the VRX18.

The Best Half-Power Switch in the Business

A lot of manufacturers use a pentode/triode switch to achieve half-power settings in their amps. I’ve played several amps with this feature. But in half power mode with the pentode/triode configuration, I’ve noticed a distinct tonal difference between the two modes in amps configured this way. It’s not that the tone is bad. In fact, many I’ve played around with sound great in half-power mode. But it’s like two different amps.

Jeff Aragaki takes a different approach and instead adjusts the B+ voltage to maintain the usage of all pins in the power tubes. I’m not an electrician, and can’t even begin to explain this technically, so I’ll just say it this way: When you switch to half-power mode in any Aracom Amp, the amp doesn’t change its tonal characteristics. It sounds and plays the same!

The Difference Between Old and New

In addition to the great master volume Jeff incorporated into the VRX18, the first thing I noticed was that it was nowhere near as easy to get this amp to overdrive in channel 2 as it was with the original RoxBox 18. This is not a negative thing at all because as I mentioned in my original review, the overdrive was pretty harsh at lower volume levels. I spoke to Jeff about this, and he said that based upon my original tests and review, he decided to mellow out the extra gain stage in the VRX18 so you could get a nice overdrive tone at any volume level.

You won’t get over-the-top gain with the VRX18. But for that, I have a simple fix-all: Get a great booster pedal like a Creation Audio Labs Mk.4.23 (again, the best booster on the planet), and SLAM the front-end of the amp. 🙂

But all that said, if you’re in a venue where you can dime both master and channel volumes, you will be rewarded with gorgeous harmonics and overtones and luscious feedback!

Overall Impressions

Like I said, this is my next amp… It just rocks the house! And at $895 for the head, you could get both the VRX22 and VRX18 for under the price of a single boutique amp! This isn’t a sales pitch. The value proposition of the VRX series is something that should be seriously considered. You’re not getting a production line amp that’s built overseas. With the VRX series of amps, you’re getting a US-made, handwired amp for under a grand!!!

Admittedly, I was a little skeptical when I first ran across Aracom Amps. But I’m now a believer, and a faithful customer!

Read Full Post »

Falling in Love Again…

Posted in amplifiers, amps, Amps/Amplification, aracom amps, eminence governor, gear, gear reviews, guitar, guitar gear, guitarists, Guitars, Music, musicians, prestige guitars, Strat, tagged , , , , , , , , , , , , , , , , , , , on April 13, 2009| 3 Comments »

Over the weekend, and after a few years of owning it, I finally replaced the original speaker on my Hot Rod Deluxe with an Eminence Red Coat “The Governor.” I had already replaced the original tubes and had some other mods done to the amp to smooth out the drive channel, but there was always something missing, and that turned out to be the speaker. What a difference that has made! I feel like my Hot Rod is now no longer a Padawan but a true Jedi. 🙂

The Hot Rod was my very first tube amp, and when I bought it, I just loved the sound, but as time wore on and as I played some really great amps, my love for the amp faded, and while I’d use it for some applications, it just didn’t have a sound that I considered to be first class. With the new speaker, it is now – in my opinion – a first class sounding amp. The cleans are gorgeous and the overdrive tone is nice and open, but well-defined, with no flabby bottom end. I’m in love again! Now with my Aracom VRX22, I’ve got two great amps!

Here’s a clip I put together while playing around this evening that demonstrates how gorgeous the clean tones are:

I used my Strat for the rhythm part – amazingly in the middle pickup, which I’m really starting to love – and did the simple solo with my Prestige Guitars Heritage Elite with both pickups with about 60/40 mix of bridge and neck, respectively. The reverb you hear in the solo is the spring reverb in the Hot Rod. I have to say that Fender does reverb right. 🙂

Read Full Post »

Simple Fender Hot Rod Mod II: Swap Out Your Speaker

Posted in amplifiers, amps, Amps/Amplification, eminence governor, GAS, gear, gear reviews, guitar, guitarists, Guitars, speakers, Tone, tagged , , , , , , , , , , , , , , , , on April 11, 2009| 15 Comments »

Fender Hot Rod DeluxeAfter having my Fender Hot Rod Deluxe for a few years now, I finally decided to swap the stock speaker for an Eminence Red Coat “The Governor,” which is a moderately-priced ceramic speaker. What’s difference now? The Hot Rod Deluxe is a very mid-rangy amp in the first place, but at higher gain, the tone became a little flabby. In fact, when I knew I was going to play at gig volumes I had to dial down the bass to about 9 or 10 o’clock, and set the mid and high around 3pm to get a more crisp sound. I was able to alleviate a bit of that flabbiness with better tubes than the stock Groove Tubes, but I always suspected that the speaker had a lot to do with the flabby bottom end. I don’t know why I waited to do this simple, simple modification. It literally took 10 minutes to swap it out.

So why the Eminence Governor? Mainly because I wanted a nice mid-range focused speaker that had a smooth bottom end, and slightly sparkly highs. I had also played the Governor in a couple of different amps, and was really impressed with its brighter voicing. Here’s a frequency response chart for the Governor:

The Governor Frequency Response Chart

As you can see from the chart, the bottom end portion of the curve is a nice, smooth line. In the mid-range, the frequency response is fairly complex, then in the highs, you get some nice peaks in the 2-3 kHz range, finished off with some subtle motes above 10 kHz. The tone in the amp reflects this well. The bottom end is there, and very tame, and the mid- and high-freq response creates a gorgeous, and spacious tone. I’ll probably have some clips in the next few days, but here are clips directly off the Eminence site:

Clean

Heavy Distortion

Overdriven

All in all, this has got to be the most significant improvement to my Hot Rod’s tone!

Read Full Post »

Gear That Kills

Posted in 6V6, amplifiers, amps, Amps/Amplification, aracom amps, buying gear, GAS, gear, gear reviews, guitar, guitar gear, guitarists, Guitars, inspiration, Tone, VRX22, tagged , , , , , , , , , , , , , , , , on April 11, 2009| Leave a Comment »

Aracom Amps VRX22 - First in the series

Aracom Amps VRX22 - First in the series

You ever play some gear that from the moment you start playing, you feel like you’ve died and gone to tone heaven? In the last few years, and especially in the last couple since I started writing this blog, I’ve literally played hundreds of different types of gear, covering the spectrum of all things guitar, from guitars to effects to amps. I don’t have enough time to write about all the things I’ve played, but to keep my content fresh, and to satisfy my overwhelming curiosity about different types of gear, I’m constantly trying stuff out.

And in all that time, and through all that gear, I’ve only had some gear totally slay me once: That was when I played the very first prototype of the Aracom VRX22. The back story is pretty cool, so I’ll share it with you…

Several months back, Jeff Aragaki contacted me on my blog asking if he could buy ad space. I replied that I didn’t want to commercialize my site, but if he’d be willing to send me an amp to review I’d put his logo on my “The Dawg Digs” area if I really loved his product. Fortunately for both him and me, he only lives about 40 minutes away, so he delivered what was once called the “RoxBox,” an 18 Watt, EL84-based amp. I had this thing about EL84-based amps for awhile, and was really excited to try a non-brand-name amp; not to mention that I was entirely intrigued by the fact that that hand-wired head cost only $895! That evaluation turned into testing and reviewing several of Jeff’s amps over the next few months from heads to combos with different configurations. Talk about feeling lucky to have so much gear to play with!

Jeff and I have become fast friends. We’re contemporaries not only from our obsession with vintage gear (or any kind of gear for that matter), but we’re almost the same age, and are both local boys from the Silicon Valley. Jeff’s a great guy, and someone I really enjoy spending time with; plus he’s super smart, and I like to be around smart people. 🙂

Anyway, a couple of months ago, Jeff called me up and said, “Hey Brendan, I’ve been working on an experiment with the RoxBox, and popped a couple of 6V6’s in the amp to see what it would sound like.”

“Oh?” I replied, “That sounds quite interesting. I dig 6V6’s a lot. They have a sweet, open distortion when they’re saturated.”

“Yeah, they do,” said Jeff, “Anyway, I was wondering if you’d like to test it out.”

I immediately replied, “Need you ask? Bring it on over!”

A couple of days later, Jeff brought the amp over to the messy garage I call my home studio. We plugged it in, I hooked up my Strat, and Jeff switched on the amp. I took one test strum in the clean channel, stopped and asked, “What did you do? This f-in thing sounds incredible! Let me play a few licks…”

Jeff didn’t say anything. He just smiled, and let me play for awhile. After a few minutes he said, “Okay, try out channel 2, so you can hear the overdrive,” at which point he plugged me into the second channel, then cranked the volume.

The amp literally sang with this beautifully smooth overdrive tone, chock full of overtones and harmonics. The tone was on the bright side, similar to the Reason SM25 that I was testing, but was rich and thick, and ballsy. I just closed my eyes and smiled, luxuriating in pure tonal heaven!

When I came out of my trance, I looked at Jeff and said, “Dude, I think you’re onto something really special here. You know I’ve played tons of different amps, but this one’s special. It’s the best-sounding amp I’ve played of yours to date; and ranks very high on my overall list. Are you thinking of putting it into production?”

“Maybe. I wanted to get your feedback. I still have some stuff to do on it, but I’m really liking the tone of this amp,” Jeff replied.

“Yeah… You’ve just piqued my curiosity.”

Fast-forward a week and I get another call from Jeff. “Hey Brendan! I worked out the power handling of the amp. The one you tested wasn’t outputting at the full 22 Watts, so I made some adjustments and now it’s running at full power. To me, it sounds even better. Anyway, I’m going away on a business trip for a couple of weeks, and I’ll leave it with you to test.”

So Jeff dropped it off a couple of days later, and test it I did. I took it to gigs, recorded some clips with it, and fell in love with it even more. Jeff was right, the power handling adjustments he made turned that amp into a pure tone machine.

When Jeff got back from his trip, we met for lunch, so I could give the amp back, and give him feedback. He asked, “So how did you like the amp?”

I replied, “Uh… the word is love. I’ll keep on testing your other amps, but this is the amp I want to buy. Everything about it is perfect. The clean channel has oodles of clean headroom, and the sag you’ve built into the simulator makes it sound like the amp has a reverb. The drive channel is like nothing I’ve played before. Quite simply, Jeff, this is the perfect amp!”

Jeff just chuckled, and said a very understated, “Glad you like it.”

Since then, I’ve purchased the amp – I got the very first in the series! And while I realize that my excitement about this amp is purely subjective, other people who’ve played this amp – WAY, WAY better guitar players than me – have been just as blown away by its tone. The other day, Jeff asked me to meet him over at Gelb Music in Redwood City to show Jordan, the guitar department manager, my VRX22 (Gelb carries Aracom Amps on consignment – for now 🙂 ). I just chuckled when he plugged a guitar into the drive channel, cranked it up, and let it rip. He didn’t play more than 30 seconds before he said, “This amp rocks! It’s real ballsy and has tons of harmonics. Wow!”

Jordan had to help customers on the floor, so he gave the guitar over to another customer named Chris with whom Jeff and I had been chatting while waiting for Jordan. Chris sat down, and started to rip it up! He played with this hybrid picking technique that was just amazing to observe, and he made the VRX22 absolutely sing! I knew it sounded good, but in the hands of a truly gifted player like Chris, it was other-worldly!

Jordan returned a few minutes later to listen to Chris play. Mind you, it was loud. Chris was plugged into a 65 Amps 2 X12 cabinet and had the amp cranked. Jordan turned to me, and with a quizzical look on his face asked, “This is YOUR amp?”

I just laughed because I knew what he was thinking – he was hoping that it was an inventory amp so he could buy it himself. I said, “Yup. You thinking about getting one for yourself?”

Jordan just smiled and nodded his affirmative. We finally had to turn down the amp, and Jeff and I had to go, and as we were leaving, Jordan asked Jeff, “So what’s the turnaround time for when we order?”

Jeff said, “Between two to four weeks.”

“Cool. That’s just about right. Hey! Thanks for bringing the amp over, guys! Man that thing has f$ckin balls…” with a huge grin on his face, “That’s all we ask…” and he laughed.

I laughed with him. Jordan is a real bad-ass player himself, and when he has this type of reaction, I know he thinks it’s special. I told Jeff he better build two: One for the store, and one for Jordan.

Folks, I realize you might think I’m full of it when I say that the VRX22 is the perfect amp. But Jeff is really onto something with this amp. I’d put it head to head against a Dr. Z MAZ or a Buddha any day. I actually played a Dr. MAZ the other day. It’s a great amp. But guess what? The VRX22 is only $895 for the head! That’s almost half of what other hand-wired, boutique amps cost! Yeah, it doesn’t have a tube rectifier – the VRX22 is designed with a solid state rectifier for extra punch and it has a sag circuit to provide the vintage vibe. And in case you’re concerned that a solid-state rectifier means lower quality, I just have one thing to say: So what? Lots of vintage amps such as classic Marshall Plexi’s and many Fender amps use solid-state rectifiers. Besides, it’s the tone that matters, and compared to the MAZ, which is really nice, expressive amp, the VRX22 has a much bigger sound.

Fantastic sound for an unbelievable price? SOLD!

Disclaimer: I want to make it absolutely clear. Jeff doesn’t pay me to do reviews or pay me to give nothing but positive feedback. He calls me up to say he’s got some gear for me to test, and I test it, then write a review. To date, I haven’t received any bad gear from him, so I haven’t given his gear a less than stellar review. You might think this from the rave reviews I’m giving the VRX22, but just to alleviate any concerns about me having an affiliation with Jeff other than being a friend, remember that I clearly stated that I bought the amp. What I’m sharing is my excitement. And showing it to the folks at Gelb? That was purely a favor. I simply had the fortune of being able to play with the prototypes. It is truly a magical amp!

Click here for more information on the VRX22 and other excellent Aracom amps!

Share your slayer experience!

Read Full Post »

Gig Report: Red Bear Trading Tuff-Tone Tri-Tip Pick

Posted in gear, gear reviews, guitar, guitar gear, guitar picks, guitarists, Guitars, picks, playing live, plectrum, Red Bear Trading, Tuff-Tone, Tuff-Tone Picks, tagged , , , , , , , , , , , , , , on April 10, 2009| 1 Comment »

Just got home from my weekly gig at the restaurant where I was really able to put the Tuff-Tone Tri-Tip through its paces. I’ve never played with a Tri-Tip shaped pick, let alone gigged with a Tuff-Tone, so it promised to be interesting – especially if I didn’t like the pick – because like a dummy, I forgot to bring a spare! Fortunately, I didn’t need a spare. The Tuff-Tone worked out great!

Admittedly, I was a little nervous, not because of the Tuff-Tone material itself but because it’s a lot thinner than what I’m used to playing. If you’ve been following my blog, you’d know I’ve been using a V-Picks Snake and also a super-thick prototype Red Bear Tortis as of late. The Snake is 4.1 mm thick and the Red Bear is 4 mm. I believe the Tuff-Tones are only 1.75 mm thick. I really didn’t know if I could make a clean adjustment. All my nervousness was washed away within a few bars of the first song I played. The pick felt so natural in my fingers, I just played without thinking. Whew! That was a relief!

So how did it perform? Practically flawlessly. The Tuff-Tones feel a lot more rigid and dense than their Tortis counterparts, but the material seems to weigh much lighter. That perception could be due to having played with thick, weighty picks. But to be perfectly honest, I really loved playing with this Tuff-Tone. As I mentioned above, it felt very natural in my fingers, and all the accuracy that I’ve come to expect from rigid picks was there from the get go.

Dave mentioned that in blind tests there was no difference between the tones of the Tuff-Tones and Tortis picks produce. But I noticed a definite difference. The Tuff-Tone produces a much brighter, jangly tone than the Tortis picks. Tortis picks, on the other hand, produce a smoother, more evenly balanced tone. Neither is better than the other; they’re just different. For me, when I want a brighter tone, I’ll use a Tuff-Tone. But when I want a fatter tone, I’ll use a Tortis.

I played all sorts of tunes tonight, ranging from full-on strum songs to songs that combined strummed chords and single note runs. I could be as expressive as I wanted with this pick, and that’s really the test. Lighten up your grip and let the pick glide, and the tone it produces is marvelously bright and ringy. Dig in and be greeted with a nice snappy tone. Want to do some quick alternate picking runs? No sweat!

This is a great pick, people, and a pick I highly recommend trying out and adding to your arsenal! I know that kind of goes against the common thought of using one pick for everything, but I’ve come to realize that using different picks will produce different kinds of tones, and different “moods.” It’s kind of hard to explain, but I’m now a multi-pick player.

Read Full Post »

Quick Review: Red Bear Trading Style C Super Thick Gypsy Jazz Pick

Posted in buying gear, GAS, gear, gear reviews, guitar, guitar picks, guitar reviews, guitarists, Guitars, Music, musicians, picks, plectrum, Red Bear Trading, Tone, tagged , , , , , , , , , , , , , , on April 5, 2009| 3 Comments »

Red Bear Style "C"

Red Bear Style "C"

Imagine a pick shaped like the one to the left, but at 4 mm thick! That’s the Super Thick Gypsy Jazz Pick!

A couple of weeks ago, I was having a conversation with Dave Skowron, maker of Red Bear Trading picks, and said, “You know Dave, I just dig this Gypsy Jazz thick pick that I just bought. But as you know, for electrics, I play with a V-Picks Snake because I love the 4.1 mm thickness.” As background, I had just purchased a standard GJ thickness to replace the Heavy that I gave to a friend so she could try it out. I continued, “Do you have anything that is even close to that thickness? I would love to have that kind of thickness for playing acoustic.”

Dave replied, “Yeah, I have a sheet of the Tortis material that is pretty close to that thickness at about 4 mm. I did something even thicker for a guy once.”

“No, no any thicker, Dave, and I think it would be too much. But if you have a 4 mm thick pick, I’m all over it!”

“Okay, I’ll make up a prototype and send it to you to evaluate.”

All I can say after playing with “the prototype” for a couple of days is I hope that pick goes out of prototype because it is an incredible pick! You know how I love the feel and sound of Tortis, especially on acoustic guitar. In fact, I love the sound of Tortis with acoustic guitar that I won’t play any other type of pick on my acoustic. On electric, I dig my V-Picks Snake for its speed, tone, and thickness. Put all that together in one pick, and what you’ve got is a “Super Pick!”

The thicker you go with picks, the deeper and richer the sound. It’s not that you lose the highs; you don’t. It’s just that the thicker picks also bring out the lows, so what you get in a nice, even tonal presentation. That’s why I dig thick picks! On top of that, there is something magical with the way a Tortis pick interacts with an acoustic guitar’s strings. With me at least, playing a Tortis pick on acoustic evokes a certain visceral feeling that makes me want to close my eyes and just soak up all the tonal goodness. Not only that, Tortis, being made of a natural material, just feels natural. It’s the perfect complement for playing acoustic guitar!

So what about this super-thick Gyspy Jazz gauge? OMG!!! I am in guitar-playing heaven with this pick! It has the thickness of my beloved V-Picks snake, but all the feel and tone that I’ve come to love with my Tortis picks! To just call it “awesome” would be a complete understatement.

I first played the “Super Thick” last Friday at a gig that was primarily acoustic guitar. It started with playing some dinner entertainment music before a re-enactment of Christ’s passion. I was playing my Ovation Celebrity directly into a Genz-Benz 100 Watt upright. When I struck the first chord of the opening song. I actually had to pause and let the chord just ring and hang in the air. It was quiet enough in the room where I was playing that I could hear my guitar, as the amp was there for simple sound reinforcement. I thought my original GJ as awesome at 2.3 mm. What this pick did to the natural tone of my guitar was otherwordly!

I spent most of the day yesterday playing guitar, much to the chagrin of my wife! It feels so incredible!

In any case, if you’re interested in getting one of these, contact Dave Skowron at Red Bear Trading. I’m sure he’ll make one for you. Mind you, this thickness of pick won’t be cheap, but it’ll be well worth the investment!

5 Tone Bones - Gear has stellar performance, value, and quality. This is definitely top of the class, best of breed, and it's a no-brainer to add this to your gear lineup! If I could go higher, I would with this rating. But this pick gets my highest rating!

Read Full Post »

Gear Review: Red Bear Trading Tuff-Tone Picks

Posted in GAS, gear, gear reviews, guitar, guitar gear, guitar picks, guitarists, Guitars, Music, musicians, picks, plectrum, Red Bear Trading, Tuff-Tone Picks, tagged , , , , , , , , , , , , , , on April 4, 2009| 3 Comments »

5 Tone Bones - Gear has stellar performance, value, and quality. This is definitely top of the class, best of breed, and it's a no-brainer to add this to your gear lineup!

Red Bear Trading Tuff-Tone Classic H

Red Bear Trading Tuff-Tone Classic H

 Red Bear Trading Tuff-Tone Picks

Summary:Made from an entirely new pick material, Tuff-Tone picks provide the same, high-quality sound you expect from Red Bear picks, but are much more durable than standard Tortis picks.

Pros: Get ’em wet, put ’em in your pocket with all your keys and change, put ’em in the washer and dryer. They won’t break or warp.

Cons: None.

Price: $10 direct from Red Bear Trading

Tone Bone Rating: 5.0 – The totally unique sound and feel of a Tuff-Tone pick makes it a winner in my book.

I love it when I get gear in the mail, and I especially love it when it’s a padded envelope from Red Bear Trading. I came home early from work yesterday afternoon to get ready to go to a gig in the early evening, and much to my extreme surprise and pleasure, a padded envelope from Red Bear Trading what waiting for me on the kitchen table. I immediately opened the envelope, poured out the contents into my hand and out dropped three pick packages: Two Tuff-Tone picks (a Tri-Tip and B-Style – both heavy gauge), and a super-super thick C Style Tortis measuring 4mm. I’ll be covering the Tortis in another review, so I’ll just mention it here.

I’ve been anticipating receiving these Tuff-Tone picks ever since I spoke to Dave Skowron – maker of Red Bear Picks – about them a few weeks ago, after I saw the announcement on his site. Rather than have me paraphrase the announcement, here’s an excerpt:

After a few years of research and development we have finally come up with a material which is an alternative to our standard pick material. The requirements we sought for this new line of picks were simple – deliver the same great tone and have the same comfortable feel as or regular picks while possessing unbeatable strength and warp-resistance. We feel that we have found that material. After months of beta-testing by some of the industry’s top players, we are ready to roll out the new line. The tone and feel have been confirmed in our tests. These picks are as good sounding as our standard line. They last and last, and are basically worry-free. In blind tests they were indiscernible from our standard line.

I have to disagree with Dave on the last line of the paragraph. To me at least, they aren’t indiscernible from the standard line. They’re similar in tonal response, in that they produce sound very quickly, but they are resoundingly not the same. I’ll get into more detail about this in just a bit. Where they are indiscernible is in their build quality. One of the things that has always impressed me about Red Bear picks is Dave’s attention to detail with respect to the build quality of his picks. To date, I have never received a single pick from Red Bear with any flaws. The bevels have always been perfect. Dave takes quality seriously, and all the picks I’ve had and evaluated have been flawless…

What about the sound?

In a word, awesome! But as I mentioned above, Tuff-Tones aren’t tonally indiscernible from the standard Tortis picks. Frankly, to me at least, they have a sound all their own. The material is much harder than Tortis, and to me sound just a bit brigher tonally. Or maybe I shouldn’t say brighter. The tone they produce is much more “chimey.” They produce the same rich tone you’d expect from standard Tortis, but I believe they bring out the high frequency tones much more than Tortis picks. If I were to make a comparison, tonally they sit right in the middle between a standard Tortis Heavy and a V-Picks heavy; the V-Picks heavy being the bright side.

But even then, these picks are tonally distinct, and no recording is going to capture the sound properly. I actually tried this morning, and it just didn’t work, probably due to my microphones, which double as stage mics, so the EQ tends to stay in the midrange. I could hear the differences in my amp, but just couldn’t capture the sound – sorry. You’ll have to buy a couple to see what I’m talking about. 🙂 Which you should – these picks rock!

How they feel…

Make no bones about it; not only are they tonally distinct they have a totally unique feel. Unlike Tortis or V-Picks picks, these aren’t glossy at all. They have a flat finish, and a rougher, almost tackier feel. But they feel so good! When I first held one of the Tuff-Tones I got, I was a little doubtful about them because of how they felt. I was wondering if they’d be slower. I’ve been so used to playing gloss-finish picks, that these were like sandpaper by comparison (mind you, that’s just flowery language – they actually have a smooth finish). But all my concerns were laid to rest when I started to play. Like Tortis and V-Picks picks, they just glide across the strings. I really love how they feel!

Even at the heavy gauge, which is 1.7mm, these have got to be the most rigid picks I’ve ever played. I love that about these picks. They really don’t give, so they give you immediate tactile feedback while you’re playing.

Overall Impressions

Talk about being torn! I love these picks. I kind of lean towards brighter tone, and these totally give it to me. But I also love the super-rich tones of my Tortis picks, and the chimey tones that my V-Picks Snake gives me. I’m chuckling right now because I would have never thought I’d look at a pick as a tone-shaping device. Most people just use a single pick – I was the same until I discovered the virtues of using high-end picks. But the thing with high-end picks is that they each bring something different to the table with respect to tone and feel, helping you dial in just the right kind of tone for the song you’re playing. I now look at picks much like a painter looks at brushes. I now have yet another brush to add to my collection of tone “brushes.”

Read Full Post »

« Newer Posts - Older Posts »