Feeds:
Posts
Comments

Archive for the ‘gear reviews’ Category


Click to enlarge

Click to enlarge

Fishman SA220 Solo Amp

Summary: Compact and weighing in at just 25 lbs., the SA220 Solo Amp is an ideal PA solution for the solo acoustic guitarist/vocalist, but it’s versatile and loud enough to be used as a PA for a band (if you have a couple of them).

Pros: It may not have the Bose name, but I’d put this up against the L1 Compact system any day. With built-in, independent, 3-way EQ, and a variety of other features, if you’re a solo acoustic artist, you owe it to yourself to check this unit out! I got it set up in less than a minute!

Cons: None

Features:

  • Drivers
  • – Six 4″ mid-woofers, patented dual gap, high excursion design, neodymium magnets (200W)
    – One 1″ neodymium soft dome tweeter with level control (20W)

  • Auxiliary Stereo Input with Level control
  • Four Digital Reverb effects with master level
  • Balanced XLR D.I. outputs for both channels and main mix
  • Independent effect loops for Channel 1 and Channel 2 (OMG!!!)
  • Unique Monitor I/O for improved on-stage ensemble monitoring
  • Mute with remote footswitch input
  • Tuner Output
  • Ships with Stand and padded Carry Bag (w/ wheels)
  • Dimensions: 41.5″ H x 5.6″ W x 6.6″ D
  • *Weight: 25 lbs without Stand, 35lbs with Bag and Stand

Price: $999 Street

Tone Bone Score: 5.0 ~ Talk about ease of use! As I mentioned above, I got the SA220 set up in less than a minute! And my Yamaha APX900 sounds absolutely killer through this, not to mention the great clarity of the vocals. This is a winner, folks!

Year over year, I play between 100 to 150 gigs a year, with about half of them as a solo acoustic act. My solo gigs have consisted mainly of my weekly restaurant gig, but I do lots of weddings and special events throughout the year as well. Of late, the restaurant I gig at moved my act outside in a public patio area as the weather is gorgeous.

To make a long story short, even though the restaurant has a decent PA system, I ended up bringing my own PA last week, which was the first week we did the outdoor show. That worked pretty well, and my PA has a great sound. But it also made me realize that the old mixing board, and big 300 Watt speakers was just too much gear to haul around. Even if I ended up using the restaurant’s PA, which is a nice one, I’d still have to lug the board and speakers and stands down from the office upstairs. Enter the Fishman SA220 Solo Amp.

Plug It In and Go!

I finally received my SA220 today after having to wait for a couple of weeks for it to arrive (had to be ordered). So when I got home, I knew I had to try it out to see how it sets up, and of course, to work out kinks before I gig with it. There’s nothing worse than fighting your rig or sound DURING a gig – especially when you’re solo.

The guys at the shop assured me that Fishman’s claims of easy setup were true. I am now a believer! I had the SA220 set up in exactly 42 seconds!!! That didn’t include hooking up my pedal board, guitar, and microphone, but I had the system on its tripod stand and plugged into power, ready to go, in that short amount of time. That just blew me away! Plus, everything you need to get up and running fits into a single carrying unit that consists of two bags: One for the array/PA, and one for the tripod that buckles to the main bag. Talk about convenience! Fishman really had the solo artist in mind when they built this!

How It Sounds

For my audition, I just plugged my guitar into the SA220 directly, and hooked up my microphone. All I can say is that the sound is spectacular! I was actually concerned about the bass response of the unit, but apparently Fishman distributes the bass response among the six main mid-woofers. It may not get boomy with the bass, but the sound is absolutely rich, and vocals are clear and full. Normally, I use a DI to go into a board – and will probably do the same with this unit, but my guitar sounded clear and natural and full plugged in directly without those annoying high-end transients and flattened tone that is so annoying with plugged in acoustics. Admittedly, the ART system in my Yamaha APX900 has quite a bit to do with that, but Fishman really knows how to condition sound.

At first, I had a bit of a problem with feedback, but setting the phase switch and tweaking the anti-feedback knob (it’s a variable frequency notch filter designed to subdue a resonant peak – just turn it to where the feedback gets reduced or eliminated – very cool), and attaching the rubber sound hole cover on my guitar took care of the feedback problem.

Luckily no one was home when I tested the SA220. I set it up outside so I could see how it performed. Damn! Even with just 220 Watts, the SA220 is LOUD!!! I had the Master volume set at around 10 am, and that will be enough to fill the large patio space I’ll be playing in tomorrow! It’s not a stretch to say that the SA220 can cover a lot of venues.

As far as listening angle is concerned, the SA220 disperses the sound incredibly well! Even at extreme angles, where I was almost even with the array, the sound was clear with good volume. Of course, narrower angles are better, but this unit will have no problem playing in the open space I’ll be playing.

Talk About Bang for the Buck!

The sound is great, but I have to tell you, I was ready to get the Bose L1 Compact, which is a great unit, but the mere fact that if I wanted more EQ control and other features, I’d have to spend another $499 really soured my taste for the unit. On the other hand, Fishman has packed all sorts of features into the SA220 that make it hands-down the better value. Independent 3-band EQ for each channel, phase and anti-feedback control, 4 types of digital reverb, a mute switch (that is REALLY handy!), independent balanced XLR outs to go into a board, and my favorite feature: independent effects loop for each channel! You just can’t argue about with what comes built-in on this unit!

Overall Impression

It’s hopefully obvious that I love this unit! For me as a solo artist, it’s a true game changer! It’s light and versatile, and the sound is spectacular. What more could I ask for?

Read Full Post »

Dynamics. It’s what separates a mechanical  and boring piece from something that can move an audience to tears. In this episode, Doug talks about the incredible dynamics of the Dumble Overdrive Special.

This is the last video in the series of Doug Doppler on the Dumble Overdrive Special, but it’s not the last. I’ve got many more “Doppler on…” videos to come, so stay tuned!!!

Read Full Post »

That’s right! As I mentioned in episode 1 of the series, the Dumble can shred, and it sound unbelievable. In this part, Doug talks in-depth of the tonal capabilities of the Dumble amp and demonstrates it versatility by shredding on it!

Read Full Post »

Wow! I didn’t realize how fun doing videos would be! Expect to see more video reviews in the future! In any case, here are some key points:

Tone Bone Rating 5.0
Notes I LOVE this stand! I’m going to get a couple more! Very well built and lightweight, it’s a perfect stand not just for the stage, but also in the studio where its small footprint won’t take up much space!
Price $34.95
Pros Very easy to fold up and lug around
Cons May not work for bass – it works for mine, but fat basses may not fit (this is not really a negative, just a warning)

Read Full Post »

This is a hotly debated topic, and there are great arguments for or against using one. I’m of the former group and have used attenuators to great success over the years. To demonstrate how useful an attenuator can be, I put together a quick video. Here you go:

I wanted to be as non-technical about the usage of an attenuator because there are so many attenuator designs on the market. So I kept this video at a fairly high level. I’ll get into more detail in the next video when I discuss the Aracom PRX150-Pro.

Read Full Post »

Yup, you guessed it… yet another overdrive pedal. I came across this pedal while perusing the forums over at Mark Wein Guitar Lessons. Mark occasionally posts “Pedal of the Day” entries, and this was his latest. I know, lots of people complain about “yet another OD pedal.” But if you stop to think about it, there’s probably a great reason why there are so many OD’s on the market. What comes to mind for me is that no one overdrive can cover everything. Let’s face it, a Tube Screamer or TS-like OD can only take you so far tonally.

Don’t get me wrong: Not all OD’s are created equally. Admittedly, there’s lots of crap out there, which is a fallout of the boutique gear movement. I’ve suspected several boutique gear “manufacturers” of simply building gear based on kits, putting a nice paint job on them, then selling the pedal for hundreds of dollars; which is why I’ve always stressed to folks – try before you buy!

The LovePedal Kalamazoo is no exception to this rule. While it has some very cool features (I’ll list them below), you really never know how a pedal will work with your rig until you put it in your chain. But despite that, I’m really intrigued by LovePedal’s twist on the overdrive with the Kalamazoo.

So what’s to like? As you can see, there are two little knobs called Tone and Glass under the common Level and Drive knobs. I believe this is where the magic of the pedal lies. Tone is a treble content roll-off, while glass is a treble booster that doesn’t affect the lows. These are wired in series, so they interact with each other. From what I could gather from the demo from ProGuitarShops I’ve seen, these two knobs offer up a world of tonal possibilities.

Another thing that appeals to me is that I prefer a more “open” kind of overdrive to let my power tubes do the compression. To me, it sounds more natural that way. The Kalamazoo was designed to create an “open” type overdrive tone. With it, you can slam the front-end of your amp, and make that gain push the power tubes into compression.

And from what I could gather, the Kalamazoo is VERY responsive to input gain, which is demonstrated in the ProGuitarShops video.

Here are the pedal’s features (from the Love Pedal site):

9VDC Input
True Bypass LED Status
Compact Die cast Aluminum Case 4.37″ X 2.37″ X 1.07″

Controls:
DRIVE – Sets the amount of overdrive
LEVEL – Master volume control
TONE – Softens the treble content
GLASS – Increases treble without cutting bass response
STOMPSWITCH – Turns effect ON or OFF

Cost: $199

To top it off, the pedal has a mirror finish! I really dig that! My Creation Audio Labs Mk.4.23 booster has a mirror finish as well. Sweet! And at $199, this is a pedal that will not break the bank!

Here’s LovePedal’s Intro Video:

And here’s ProGuitarShop’s Demo:

For more information, visit the LovePedal site!

Read Full Post »

Click on the picture to see an enlarged view.

Wicked Woody “Original” Pedal Board

Summary: Handmade with carpentry-grade wood, this is one gorgeous pedal board. Nothing like making something so utilitarian a virtual work of art!

Pros: Completely handmade with high-grade wood that doesn’t only look great, it’s lightweight as well! Platform is reversible so you can configure the board to have your volume or wah pedal on either right or left sides. Lots of space under the platform to fit a power brick and stow your plug, and the routing on the top makes it easy to run your cables.

Cons: Could use some rubber or silicon feet to protect the bottom from scratching and elevate it above possible spills (think bar gig).

Features:

  • Elevated pedal platform. With an elevated platform, it is both easier to see, and easier to reach all of your pedals.
  • Handmade, of the highest quality certified hardwood plywood. Durable finish that will protect your woody for life.
  • Easy cable management, with the cable chanels routed into the platform it is a cinch to place your pedals in any configuration you desire, and wire them however you would like.
  • Alternative storage, under the platform for your power supply or other storage needs.
  • Measurement: 24″ X 15″

Price: $80 direct

Tone Bone Score: 4.75 ~ I’ve never seen a pedal board that looked so nice. Despite its looks though, I really would’ve liked to see some “feet” on the bottom for some extra protection. Something that looks this good should be really protected. That said, it’s easy to get some hardware that’ll do the job with minimal effort. But if it had that right off the bat, I’d give this puppy a 5.0!

For Goodness’ Sake! It’s Just a Pedal Board!

I would venture to guess that most players don’t really put to much thought into the “look” of their pedal board other than if the cables are nicely arranged and out of the way. But lots of players obsess over the look of everything in their rig; even down to their pedals’ paint jobs. So why not put them on a platform that really shows them off, as well as being useful? Aesthetics are a good thing. Myself, I tend to be far more practical to even consider something like this, but hey! Cool is cool in my book, and although I may not normally consider having a board like this, that doesn’t take away from the fact that this is one gorgeous piece of functional hardware!

From my point of view the Wicked Woody pedal board is like a nicely shined pair of shoes. Most people wouldn’t normally notice them, but they do notice that there’s something “nicer” when you wear them. Such is the case with the Wicked Woody. It’s not a showy and sparkly, but it just looks well, nice. Besides, there’s nothing sweeter-looking to me than nicely grained wood, and all Wicked Woody pedal boards are made of high-grade woods, with a nice, smooth finish. In other words, the provide a sweet presentation platform for your pedals!

Setting Up the Board

When I received my evaluation board today, I was amazed by how lightweight it was, but it was absolutely solid. The plywood used would not bend or give at all! But in addition, it looked fantastic! I know, it’s kind of hard to be excited by something so utilitarian, but this board looks so good – it kicks ass!

Luckily, my evaluation board also included some velcro strips, so it was a simple matter of attaching them to the board. I got a fairly long length, so I just cut it in two and laid the strips straight across the board. If I were to actually keep the board, I’d be a lot more meticulous and place strips so the they don’t show at all. But for my evaluation, I just wanted to be able to easily arrange my pedals.

I have to say that I’ve never seen my pedals look so good. 🙂 Here’s a picture:

A very cool thing that I liked immediately was that the platform fits my back line of pedal risers perfectly! Four pedal risers fit exactly flush to the edges of the platform. The folks at Wicked Woody say you might not need pedal risers, and based upon the space between the front and back lines and the nice angle of the platform, I’d tend to agree with that. But with my clumsy, double-E feet, I need every advantage I can get, so it’s very convenient that the platform fits the pedal risers so perfectly.

You can clearly see the route in the center. There are actually two routes, but the upper one is obscured by my pedal risers. But both are very conveniently placed. The platform has a round hole on each side to run cables through as well. That is very convenient as I was able to run the power and connector cables underneath the wah. Then to connect the wah to my next pedal, I ran the connector through one side hole, then out the other side hole to connect to my CE-2. When all was said and done, I was impressed by the arrangement. Plus, the big base board really creates a nice spacious effect.

Now I know there’s a lot of debate with the placement of a wah pedal. Should it be before or after the drive pedals? I happen to prefer mine to be placed after my drive pedals, so the default arrangement, with the wah pedal on the left was perfect for me. However, for those who prefer it to be on the other side, the platform is reversible. You just have to unscrew the platform from the bottom of the board, turn it around, and you can place your wah (or volume or expression pedal) on the right side.

I didn’t take a picture of the back of the platform, but there’s plenty of room underneath. I placed a fuzzy strip underneath the platform, and put my Dunlop DC Brick there then ran the power connectors to the pedals through the routes. Having those routes is a real nice feature because it keeps your power cable runs nice and neat – and hidden from view. There’s also plenty of room underneath to place a spare pedal or two (as long as they have a low profile), and of course, you can stow your plug underneath during transport.

The eval board didn’t come with a case, so I’m not sure if there is one available. Hopefully there is one available because I’d definitely want one to transport the board to and from gigs if I owned one of these beauties.

So… overall impression? I dig this board. It looks fantastic, but it has some very nice features that make setting up your pedals a breeze. It literally took me less than 10 minutes to get everything hooked up. Granted, if I owned one of these, I’d take a bit more time to make everything perfect, but one could do a lot worse.

Update: April 1, 2010

Just got a message from the folks at Wicked Woody. They don’t have a case for their boards yet, but should have one as an option within the next couple of weeks. This is great news!

For more information, go to the Wicked Woody site!

Read Full Post »



Click on the picture to see an enlarged view.

Radial Engineering ProDI Direct Box

Summary: Need to plug your acoustic guitar or bass directly into your mixer or DAW? Don’t do it without one of these units.

Pros: Completely passive DI, requires no internal or external power sources. Super-transparent, the ProDI adds no artifacts to your tone. Used with an acoustic guitar, it makes your guitar come alive!

Cons: None

Features (from the Radial web site):

  • Full range passive direct boxes
  • Isolation transformer eliminates noise
  • Very low harmonic and phase distortion
  • Compact and rugged design
  • Ideal for live sound and studio
  • Mono (ProDI) or stereo (ProD2) models

Price: $99 street

Tone Bone Score: 5.0 ~ Talk about having my acoustic guitar just come alive! If you’re not using a DI when plugging into a board, you need to get this!

For my solo acoustic gigs, I’ve been using my DigiTech Vocalist Live 4 for the last couple of years, and it has been terrific. But back when my Ovation got damaged (which I’ve since fixed with a little wood glue), I’ve been using my Fender Stratacoustic with the Vocalist. Unfortunately, the Vocalist doesn’t like input gain of the Stratacoustic, and driving hard on the strings would cause the Vocalist to overdrive, and cause a pop in the PA system. Not good. Luckily, the Vocalist Live has a Guitar Thru jack, so I could route the signal to another channel on the board.

But that meant that I was going to be plugging direct, and I knew that plugging an acoustic directly into a board doesn’t sound very good at all. Not only is the sound muddy with way too much midrange “goop,” there’s also a huge loss in dynamics, ultimately making the guitar tone flat and lifeless. While I don’t completely understand the electronics, the problem apparently lies in the impedance mismatch between guitar and board; and if I’ve learned anything impedance mismatches from working with attenuators, impedance mismatch is a big culprit for loss of tone and transparency. Enter the DI, or direct input box.

The main purpose of a DI box is to take one type of electronic signal, convert it to a magnetic signal, then convert it back to an electronic signal again. The  device used for this is a transformer. With a DI, the unbalanced, high-impedance signal coming from the guitar goes into the transformer, which “transforms” the signal into a balanced, low-impedance signal on the other end. The net result is that impedances are properly matched on both ends, theoretically retaining your tone. Now, enter the Radial ProDI.

I knew I had to get a DI, but wasn’t sure about which one to get, as there are many to choose from. But a quick call to Jordan at Gelb Music got me on track right away. I’ve been buying gear from him for years, and he knows my rig. So when I explained what I wanted to do, he had an immediate recommendation: The Radial Engineering ProDI.

Jordan told me, “I just recorded some acoustic tracks directly into a board, and used the ProDI. I was blown away by the tone. It totally made my guitar come to life – even plugged in! And at $99, it’s totally worth it.”

That was enough of an endorsement for me. Yeah, you could say it’s just another sales guy trying to make a sale, but I’ve been dealing with Jordan for awhile, and not only is he knowledgeable, everything he recommends, he plays. That’s Gelb’s shtick. They have an unsaid policy that their sales guys can’t make recommendations on anything they haven’t played, so you can be assured that their recommendations are reliable. I’ve been buying gear from them for years, so I’ve experienced that first-hand, AND benefited from that policy!

How It Sounds

I put together a couple of quick audio clips to demonstrate the difference between going direct into my DAW vs going through the ProDI.

Guitar straight into the DAW

Guitar into the ProID then into the DAW

One of the reasons I chose the Stratacoustic was because of the fantastic Fishman pre-amp and dual pickup system it uses. Plugged in, it sounds incredible. But even plugged in, there’s a detectable (at least to my ears) muffling of the tone, whereas with the ProDI, the guitar sounds richer.

I realize that with these recordings the differences are subtle at best. However, the difference was far greater plugged into the board at the restaurant I played at on Friday. I did an A/B test during sound check, and I couldn’t believe the difference in clarity between going direct into the board, and going through the ProDI first.

Overall Impressions

This is yet another piece of gear that I cannot live without for going direct. It’s a simple box for sure, but at $99, what it brings to the table is so much! For more information, check out the Radial Engineering ProDI page!

Read Full Post »



Click on the picture to see an enlarged view.

Yamaha APX900 Thinline Acoustic-Electric Guitar

Summary: Yamaha got it right with its Acoustic Resonance Technology (ART) pickup system. Plugged in, the tone shaping possibilities are amazing. If you’re looking for a mid-range performance guitar, this is a guitar you have to consider.

Pros: ART pickup system rocks the house! Incredibly playable guitar with a great-feeling neck. Action out of the box was just right.

Cons: A little bright and thin-sounding unplugged, but this is a thinline, so that’s expected. But despite that, it has a nice, rich tone.

Features (from the Yamaha web site):

Top Solid Spruce
Back & Sides Flamed Maple
Neck Nato
Fingerboard Rosewood
Bridge Rosewood
Tuners Die-cast Gold
Body Style Thinline with Cutaway
String Scale 25 9/16″
Body Depth 3 1/8″ – 3 9/16″
Nut Width 1 11/16″
Colors Natural, Mocha Black, Ultramarine, Crimson Red Burst
Finish Hi-Gloss
Preamp System57 (3-way A.R.T.)

Price: $699 street

Tone Bone Score: 5.0 ~ This guitar offers the best of both worlds: Fantastic plugged in tone, and rich (though bright) unplugged tone.

My very first brand-new guitar was an old Yamaha FG335 that my dad gave me for my birthday. Up to that point,  I had been playing hand-me-downs from my cousins. Not complaining about those old guitars, but getting a brand-new guitar is always special. That FG served me well for 15 years before it had a bit of an accident, and I had to retire her (I had named her “Betsy”).Since owning “Betsy,” I’ve always been partial to Yamaha acoustics, though the FG was the only one I’ve ever owned. They make great-sounding and -playing guitars at an affordable price. What’s to complain about that? 🙂

As you may know, I just purchased a BOSS RV-5 Digital Reverb that I recently reviewed. At the shop where I did my evaluation, I just happened to do the evaluation with an APX900; hence, this review that you’re reading. But before I continue with the review, this is my next acoustic guitar! For what you get for the retail price, you just can’t beat it!

Fit and Finish

Even with the “cheap” product lines, I’ve always been impressed with Yamaha’s build quality. No errant coating, nice and straight joints, and well-dressed frets. The APX900 was no exception in this department. The frets ends were rounded off nicely, the action was perfect – not too low, not too high. I dig the “bookend” triangular mother-of-pearl inlays on the neck. It’s a real nice touch; and the binding about the sound hole and body add nice definition to the look of the guitar.

Playability

With a nice “C” shape neck, the APX is a very comfortable guitar to play. Cutouts are must for me to play high up on the neck and the action is such that high notes are easy to fret. I detected no buzz at all anywhere on the neck, and the intonation was perfect – at least from what I could tell. The neck is a bit on a narrow side, much like an electric guitar, but that’s the way I personally like it, so whether playing chords or picking individual notes, the key word with the APX900’s playability is “comfort.”

How It Sounds

As I mentioned above, as a thinline guitar, its natural, unplugged tone is a bit thin. But that doesn’t mean it’s tinny. It just happens to sit a bit higher up in the mids, which could actually be very useful when playing with larger acoustics. And despite its thinner body, the solid spruce top really helps to project the sound out, so it produces more natural volume than you’d expect.

Plugged in is a completely different matter, and this is where the ART pickup system comes into play. As I understand it, the ART system isn’t your traditional EQ. It is a system of three individual pickups placed at specific points in the body that produce or emphasize different EQ frequencies. Unlike traditional tone controls that act as frequency cut or boost, each slider for low, mid and high is a volume control, and your output signal is a mix of the three pickups.

How does it work? In a word, AWESOME! I took several minutes to play around with the controls, and just fell in love with the system! Where traditional EQ controls may muffle or muzzle the tone if you turn down, this doesn’t happen with the ART system. Clarity is retained, no matter what you do because after all, all you’re doing is adjusting a volume control. I have to admit that it was a little unsettling at first because I was expecting the tone to muffle, especially as I bled off some highs. But that didn’t happen at all. For instance, when I first started playing, I thought the tone had a bit too much high-end. So I adjusted it down. The cool thing was that the high-end was still there, it just wasn’t as prominent as it was before I made the adjustment. I found that to be incredibly cool! I also set up the ART so I could play an arrangement of Sting’s “It’s Probably Me” where I play sort of a bass line on the 5th and 6th strings. With that, I brought down the mid and high, and turned up the bass. I was rewarded with a rich, bassy tone that was not boomy at all.

Overall Impressions

The ART system makes this guitar a winner in my opinion. If it worked this well with the APX line, I can only imagine how well it works with the top-of-the-line LX series. I’m duly impressed!

Read Full Post »


Click on the picture to see an enlarged view.

BOSS RV-5 Digital Reverb

Summary: No, it isn’t the be-all end-all in reverb pedals, but for what it offers as a nice, subtle reverb to add some spaciousness to your sound, then the RV-5 really excels.

Pros: Plate reverb is excellent on this pedal – especially with an acoustic guitar. Amazingly enough, the RV-5 is transparent to my ears and doesn’t suck tone. The RV-5 is also super-quiet, and makes no line noise at all; pleasantly surprising qualities.

Cons: The Spring reverb is a little funky on this pedal. At higher Decay settings, there’s a bit of an intended artifact in the tail of the signal. Not too pleasing to my ears.

Features (from the BOSS web site):

  • Stereo input/output for compatibility with other stereo pedals
  • 6 high-quality reverb modes on par with rackmount processors
  • First-of-its-kind Modulate mode detunes the reverb sound for added spaciousness
  • New spring reverb emulation offers realistic spring reverb sounds
  • New gate reverb taken from high-end Roland studio gear

Price: $149 street

Tone Bone Score: 4.5 ~ As I mentioned above, for what this pedal offers, it’s great! To me, its strong suit is to use it as a subtle effect to add some spaciousness to your sound. As long as you don’t overdo it, this pedal will work great. The Plate reverb is particularly fantastic with acoustic.

With all the great boutique pedals out there, BOSS tends to be a bit too run-of-the-mill for many tone connoisseurs. Even I’ve thought of BOSS as somewhat of an afterthought considering some of the great boutique pedals I have, and from my participation in various online forums. Like, “Oh yeah… BOSS has “xxx” pedal. But it’s BOSS, and that means cheap, production line stuff.” But after I purchased the BOSS RV-5, one of my first thoughts was: “Have I become such a boutique gear snob that I can so easily dismiss production line pedals like BOSS because they’re not hand-made, boutique, and cost far less than boutique stuff that’s SUPPOSED to be better. ‘Cause here I am walking out the store with a BOSS pedal!”

Admittedly, it was a sobering thought. It wasn’t that I was experiencing buyer’s remorse. I truly like this pedal. But I founded this blog to share gear I’ve either purchased or come across, and most importantly, with the premise that it’s tone that matters and not the price or who made it; that is, if it sounds good, who the hell cares who made it or how much it costs? The BOSS RV-5 is a perfect example of this. Yeah, it’s made by a company that is generally equated with “cheap” pedals. But who the hell cares? I like how it sounds. If it wasn’t for the Spring Reverb, which I don’t particularly like on this pedal, it would’ve gotten a higher rating.

My intent with getting yet another reverb pedal was to get a journeyman pedal that would just do the job for my solo acoustic gigs. I wasn’t looking for a reverb where I’d layer on tons of the effect; just something subtle. After all, I was plugging into a PA board, and just wanted a touch of spaciousness, not have the reverb be the primary tone. In my experience, at low levels, even “cheap” stuff works pretty well, so I took the RV-5 for a spin, and was rewarded with a very nice-sounding reverb. As with any digital reverb that I’ve used, using them judiciously and in moderation is the key, and that was how I did my evaluation in the shop.

The net result is that I purchased the pedal. It does the job of providing a subtle, background reverb VERY well. Someone commented in my Gig Report that they’d take the RV-3 over this. I think this was motivated by the fact that the RV-3 is great for ambient stuff, as it is both reverb AND delay. But the RV-5 is really a different animal. Heavy, ambient reverb is not its strong suit. But for adding a slight spacious texture to your tone, it clearly excels in my opinion.

How It Sounds

For what it provides for me, I think this reverb sounds great. It’s not the be-all, end-all in reverbs, and it’s definitely not something I’d use for ambient stuff, but frankly, I never use a reverb pedal for that anyway, which is why I have a delay pedal. I put together samples of the same chord progression to give you an idea of what it sounds like in its various modes. The pedal is set with Level and Tone at noon, and Decay at 2pm. All clips were played with my Gibson Nighthawk, and running into the reverb pedal and into my Aracom VRX22.

Modulate

This mode adds an ever-so-slight slight chorus modulation to the tone. It’s nice.

Gate

Gate is interesting. Both pre-delay and decay are very short. This is actually kind of cool when you want a reverb tone that doesn’t tail.

Room

This setting really started growing on me when I was doing my tests. This is really a small-room type of reverb.

Hall

Nice, expansive tone with this mode.

Plate

Probably the most subtle of the modes, it really shines with acoustic guitar, but is very useful with electric.

Spring

BOSS claims to have added real spring reverb effects to this mode. Well, it didn’t succeed. The little motes of slightly buzzing spring are absolutely annoying to me, and I would never use this mode. You can hear it a little in the clip. I wasn’t expecting it at all, so it’s out as far as I’m concerned.

Overall Impressions

Sans the Spring mode, I like the reverb this produces. Plate and Room are definitely my favorite modes on this pedal, and Modulate comes in a close third. All in all, if you’re looking for journeyman reverb where you just want to lay on some spacious texture, this is a great pedal to consider!

Read Full Post »

« Newer Posts - Older Posts »